XRD studies of UV-irradiated chitin based polyurethane elastomers

Chitin based polyurethane (PU) elastomers constituted on 4,4´-diphenylmethane diisocyanate (MDI), poly(ε-caprolactone) (PCL) and extended with blends of chitin/1,4-butane diol were synthesized via two step polymerization technique. The synthesized samples were irradiated for 50, 100 and 200 h in an UV exposure chamber as such the spectral distribution of the light is good match for terrestrial solar radiation. The crystalline behavior of the irradiated PU samples were investigated by X-ray diffraction (XRD), differential scanning calorimetery (DSC) and dynamic mechanical thermal analysis (DMTA) techniques. The effect of irradiation time and chitin contents on crystallinity were studied and investigated. The maximum decrease in the crystalline behavior of samples after irradiation observed by XRD, DSC and tan δ peaks were found for the PU samples extended with lower contents of chitin (chitin/BDO; 0/100). In comparison with irradiation times the 200 h irradiation showed maximum change in the crystalline behavior.     

Production of yeast chitin–glucan complex from biodiesel industry byproduct

Crude glycerol from the biodiesel industry was used as carbon source for high cell density fed-batch cultivation of Pichia pastoris aiming at producing a chitin–glucan complex (CGC). More than 100 g L^?1 biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g g^?1 during the batch phase and 0.63 g g^?1 during the fed-batch phase. The chitin–glucan complex was recovered from the yeast cell wall by hot alkaline extraction. CGC content in the cell wall was found to be relatively constant throughout the cultivation (18–26%) with a volumetric productivity of 1.28 g L^?1 h^?1 at the end of the fed-batch phase. The molar ratio of chitin:β-glucan in the extracted biopolymer was 16:84, close to other CGC extracted from Aspergillus biomass. The extracted polymer was characterized by Differential Scanning Calorimetry (DCS) and solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and compared with commercial biopolymers, namely, crab shell chitin and/or chitosan, algal β-glucan (laminarin) and fungal chitin–glucan complex (kiOsmetine).     

XRD studies of chitin-based polyurethane elastomers

Chitin-based polyurethane elastomers (PUEs) were synthesized by step growth polymerization techniques using poly(epsilon-caprolactone) (PCL) varying diisocyanate and chain extender structures. The viscosity average molecular weight (M(v)) of chitin was deduced from the intrinsic viscosity and found; M(v)=6.067 x 10(5). The conventional spectroscopic characterization of the samples with FTIR, (1)H NMR and (13)C NMR were in accordance with proposed PUEs structure. The crystalline behavior of the synthesized polymers were investigated by X-ray diffraction (XRD), differential scanning calorimetery (DSC) and loss tangent curves (tan delta peaks). The observed patterns of the crystalline peaks for the lower angle for chitin in the 2theta range were indexed as 9.39 degrees, 19.72 degrees, 20.73 degrees, 23.41 degrees and 26.39 degrees. Results showed that crystallinity of the synthesized PUEs samples was affected by varying the structure of the diisocyanate and chain extender. Crystallinity decreased from aliphatic to aromatic characters of the diisocyanates used in the final PU. The presence of chitin also favors the formation of more ordered structure, as higher peak intensities was obtained from the PU extended with chitin than 1,4-butane diol (BDO). The value of peak enthalpy (DeltaH) of chitin was found to be 47.13 J g(-1). The higher DeltaH value of 46.35 J g(-1) was found in the samples extended with chitin than BDO (39.73 J g(-1)).     

Surface characteristics of UV-irradiated chitin-based polyurethane elastomers

Chitin-based polyurethane elastomers (PUEs) constituted on 4,4′-diphenylmethane diisocyanate (MDI), poly(ε-caprolactone) (PCL) and extended with blends of chitin/1,4-butane diol were first synthesized via two step polymerization technique and then irradiated for 50, 100 and 200 h in an UV exposure chamber as such the spectral distribution of the light is good match for terrestrial solar radiation. The surface properties of the irradiated PU samples were investigated by contact angle measurements, surface free energy and water absorption (%), total work of water adhesion to polymer and equilibrium degree of swelling. The effects of UV-irradiation time and chitin contents in chain extenders (CE) proportion on surface properties were investigated. Results of the aforementioned surface techniques revealed that the UV-irradiated polyurethane samples were affected by varying the UV exposure period.     

Syntheses,structures, and magnetic properties of heterobimetallic complexes based on tetracyanometallic building blocks

Two tetracyanometalate building blocks, [Fe(5,5′-dmbipy)(CN)₄]^? (2) and [Fe(4,4′-dmbipy)(CN)₄]^? (3) (5,5′-dmbipy = 5,5′-dimethyl-2,2′-bipyridine; 4,4′-dmbipy = 4,4′-dimethyl-2,2′-bipyridine), and two cyano-bridged heterobimetallic complexes, [Cu₂(bpca)₂(H₂O)₂Fe₂(5,5′-dmbipy)₂(CN)₈] · 2[Cu(bpca)Fe(5,5′-dmbipy)(CN)₄] · 4H₂O (4) and [Cu(bpca)Fe(4,4′-dmbipy)(CN)₄]_n (5) (bpca = bis(2-pyridylcarbonyl)amidate), have been synthesized and structurally characterized. Complex 4 contains two dinuclear and one tetranuclear heterobimetallic clusters in an asymmetric unit whereas the structure of complex 5 features a one-dimensional heterobimetallic zigzag chain. The Cu(II) ion is penta-coordinated in the form of a distorted square-based pyramid. Magnetic studies show ferromagnetic coupling between Cu(II) and Fe(III) ions with g = 2.28, J₁ = 2.64 cm^?1, J₂ = 5.40 cm^?1 and TIP = ?2.36 × 10^?3 for complex 4, and g = 2.17, J = 4.82 cm^?1 and zJ′ = 0.029 cm^?1 for complex 5.     

Improved β-carotene production of Rhodotorula glutinis in fermented radish brine by continuous cultivation

Fermentation kinetics of growth and β-carotene production by Rhodotorula glutinis DM28 in batch and continuous cultures using fermented radish brine, a waste generated from fermented vegetable industry, as a cultivation medium were investigated. The suitable brine concentration for β-carotene production by R. glutinis DM28 was 30 g l^?1. Its growth and β-carotene production obtained by batch culture in shake flasks were 2.2 g l^?1 and 87 μg l^?1, respectively, while, in a bioreactor were 2.6 g l^?1 and 186 μg l^?1, respectively. Furthermore, its maximum growth rate and β-carotene productivity in continuous culture obtained at the dilution rate of 0.24 h^?1 were 0.3 g l^?1 h^?1 and 19 μg l^?1 h^?1, respectively, which were significantly higher than those in the batch. Therefore, improved growth rate and β-carotene productivity of R. glutinis in fermented radish brine could be accomplished by continuous cultivation.     

Relationship between microbial activity and microbial community structure in six full-scale anaerobic digesters

High activity levels and balanced anaerobic microbial communities are necessary to attain proper anaerobic digestion performance. Therefore, this work was focused on the kinetic performance and the microbial community structure of six full-scale anaerobic digesters and one lab-scale co-digester. Hydrolytic (0.6–3.5 g COD g^?1 VSS d^?1) and methanogenic (0.01–0.84 g COD g^?1 VSS d^?1) activities depended on the type of biomass, whereas no significant differences were observed among the acidogenic activities (1.5–2.2 g COD g^?1 VSS d^?1). In most cases, the higher the hydrolytic and the methanogenic activity, the higher the Bacteroidetes and Archaea percentages, respectively, in the biomasses. Hydrogenotrophic methanogenic activity was always higher than acetoclastic methanogenic activity, and the highest values were achieved in those biomasses with lower percentages of Methanosaeta. In sum, the combination of molecular tools with activity tests seems to be essential for a better characterization of anaerobic biomasses.     

Metabolic,hygric and ventilatory physiology of the red-tailed phascogale (Phascogale calura; Marsupialia,Dasyuridae): Adaptations to aridity or arboreality?

The red-tailed phascogale is a small arboreal dasyurid marsupial that inhabits semi-arid to arid regions of Western Australia's wheat belt. Its body mass (34.7 g) is only ～15% of that predicted based on its phylogenetic position among other dasyuromorphs; we interpret this as an adaptation to its scansorial and semi-arid/arid lifestyle. The standard physiology of this species at a thermoneutral ambient temperature of 30 °C conforms to that of other dasyurid marsupials; body temperature (34.7 ± 0.37 °C), basal metabolic rate (0.83 ± 0.076 mL O₂ g^?1 h^?1), evaporative water loss (1.68 ± 0.218 mg H₂O g^?1 h^?1) and wet thermal conductance (3.8 ± 0.26 J g^?1 h^?1 °C^?1) all fall within the 95% predication limits for the respective allometric relationships for other dasyurid species. Thermolability confers an energy savings at low T_a and water savings at high T_a. Torpor, observed at low T_a, was found to be more beneficial for energy savings than for water economy. The red-tailed phascogale therefore has a physiology suitable for the challenges of arid environments without any obvious requirement for adaptations to its scansorial lifestyle, other than its considerably lower-than-expected body mass.     

Purification and characterization of an extracellular antifungal chitinase from Penicillium ochrochloron MTCC 517 and its application in protoplast formation

A highly chitinolytic strain Penicillium ochrochloron MTCC 517 was procured from MTCC, Chandigarh, India. Culture medium supplemented with 1% chitin was found to be suitable for maximum production of chitinase. Purification of extracellular chitinase was done from the culture medium by organic solvent precipitation and DEAE-cellulose column chromatography. The chitinase was purified 6.92-fold with 29.9% yield. Molecular mass of purified chitinase was found to be 64 kDa by SDS-PAGE. The chitinase showed optimum temperature 40 °C and pH 7.0. The enzyme activity was completely inhibited by Hg²⁺, Zn²⁺, K⁺ and NH₄⁺. The enzyme kinetic study of purified chitinase revealed the following characteristics, such as apparent K_m 1.3 mg ml^?1, V_max 5.523 × 10^?5 moles l^?1 min^?1 and K_cat 2.37 s^?1 and catalytic efficiency 1.82 s^?1 M^?1. The enzyme hydrolyzed colloidal chitin, glycol chitin, chitosan, glycol chitosan, N,N′-diacetylchitobiose, p-nitrophenyl N-acetyl-β-d-glucosaminide and 4-methylumbelliferyl N-acetyl-β-d-glucosaminide. The chitinase of P. ochrochloron MTCC 517 is an exoenzyme, which gives N-acetylglucosamine as the main hydrolyzate after hydrolysis of colloidal chitin. Protoplasts with high regeneration capacity were obtained from Aspergillus niger using chitinase from P. ochrochloron MTCC 517. Since it also showed antifungal activity, P. ochrochloron MTCC 517 seems to be a promising biocontrol agent.     

Synthesis of 2-(4-substituted benzyl-1,4-diazepan-1-yl)-N-(3,4-dihydro-3-oxo-2H-benzo[b][1,4]oxazin-7-yl)acetamides and their positive inotropic evaluation

Herein we describe the discovery of compound 3g, a potent positive inotropic agent compared with the standard drug, milrinone. Compound 3g was developed from a series of 2-(4-substitutedbenzyl-1,4-diazepan-1-yl)-N-(3,4-dihydro-3-oxo-2H-benzo[b][1,4]oxazin-7-yl) acetamides found in an evaluation of inotropic activity by measuring left atrium stroke volume on isolated rabbit heart preparations. Several compounds showed favorable activities, but 3g was the most potent, with 7.68 ± 0.14% increased stroke volume (milrinone 2.38 ± 0.05%) at 1 × 10^?5 M in our in vitro study. The chronotropic effects of compounds having significant inotropic effects were also evaluated.     

Challenges in enzymatic hydrolysis and fermentation of pretreated Arundo donax revealed by a comparison between SHF and SSF

The perennial herbaceous crop Arundo donax is a potential feedstock for second-generation bioethanol production. In the present work, two different process options were investigated for the conversion of two differently steam-pretreated batches of A. donax. The pretreated raw material was converted to ethanol with a xylose-consuming Saccharomyces cerevisiae strain, VTT C-10880, by applying either separate hydrolysis and fermentation (SHF) or simultaneous saccharification and fermentation (SSF). The highest overall ethanol yield and final ethanol concentration were achieved using SHF (0.27 g g^?1 and 20.6 g L^?1 compared to 0.24 g g^?1 and 19.0 g L^?1 when SSF was used). The performance of both SHF and SSF was improved by complementing the cellulolytic enzymes with hemicellulases. The higher amount of acetic acid in one of the batches was shown to strongly affect xylose consumption in the fermentation. Only half of the xylose was consumed when batch 1 (high acetic acid) was fermented, compared to that 94% of the xylose was consumed in fermentation of batch 2 (lower acetic acid). Furthermore, the high amount of xylooligomers present in the pretreated materials considerably inhibited the enzymatic hydrolysis. Both the formation of xylooligomers and acetic acid thus need to be considered in the pretreatment process in order to achieve efficient conversion of A. donax to ethanol.     

Synthesis and antimicrobial activity of novel amphiphilic aromatic amino alcohols

We report in this work the preparation and in vitro antimicrobial evaluation of novel amphiphilic aromatic amino alcohols synthesized by reductive amination of 4-alkyloxybenzaldehyde with 2-amino-2-hydroxymethyl-propane-1,3-diol. The antibacterial activity was determined against four standard strains (Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli, Pseudomonas aeruginosa) and 21 clinical isolates of methicillin-resistant Staphylococcus aureus. The antifungal activity was evaluated against four yeast (Candida albicans, Candida tropicalis, Candida glabrata and Candida parapsilosis). The results obtained showed a strong positive correlation between the lipophilicity and the antibiotic activity of the tested compounds. The best activities were obtained against the Gram-positive bacteria (MIC = 2–16 μg ml^?1) for the five compounds bearing longer alkyl chains (4c–g; 8–14 carbons), which were also the most active against Candida (MIC = 2–64 μg ml^?1). Compound 4e exhibited the highest levels of inhibitory activity (MIC = 2–16 μg ml^?1) against clinical isolates of MRSA. A concentration of twice the MIC resulted in bactericidal activity of 4d against 19 of the 21 clinical isolates.     

Poly(3-hydroxybutyrate) production by Cupriavidus necator using waste glycerol

Polyhydroxyalkanoates (PHAs) have been recognized as good substitutes for the non-biodegradable petrochemically produced polymers. However, their high (real or estimated) current production cost limits their industrial applications. This work exploits two strategies to enhance PHAs substitution potential: the increase in PHA volumetric productivity in high density cultures and the use of waste glycerol (GRP), a by-product from the biodiesel industry, as primary carbon source for cell growth and polymer synthesis. Cupriavidus necator DSM 545 was used to accumulate poly(3-hydroxybutyrate) (P(3HB)) from GRP and from commercial glycerol (PG) as control substrate. On PG, productivities between 0.6 g_PHB L^?1 h^?1 and 1.5 g_PHB L^?1 h^?1 were attained. The maximum cell DW was 82.5 g_DW L^?1, the P(3HB) content being 62%. When GRP was used, 68.8 g_DW L^?1 with a P(3HB) accumulation of 38% resulting in a final productivity of 0.84 g_PHB L^?1 h^?1 was obtained. By decreasing the biomass concentration at which accumulation was triggered, a productivity of 1.1 g_PHB L^?1 h^?1 (50% P(3HB), w/w) was attained using GRP. P(3HB) molecular weights (M_w) ranged from 7.9 × 10⁵ to 9.6 × 10⁵ Da.     

Enhanced decolorization and biodegradation of textile azo dye Scarlet R by using developed microbial consortium-GR

A developed consortium-GR, consisting of Proteus vulgaris NCIM-2027 (PV) and Micrococcus glutamicus NCIM-2168 (MG), completely decolorized an azo dye Scarlet R under static anoxic condition with an average decolorization rate of 16,666 μg h^?1; which is much faster than that of the pure cultures (PV, 3571 μg h^?1; MG, 2500 μg h^?1). Consortium-GR gave best decolorization performance with nearly complete mineralization of Scarlet R (over 90% TOC and COD reduction) within 3 h, much shorter relative to the individual strains. Induction in the riboflavin reductase and NADH–DCIP reductase was observed in the consortium, suggesting the involvement of these enzymes during the fast decolorization process. The FTIR and GC–MS analysis showed that 1,4-benzenediamine was formed during decolorization/degradation of Scarlet R by consortium-GR. Phytotoxicity studies revealed no toxicity of the biodegraded products of Scarlet R by consortium-GR. In addition, consortium-GR applied for mixture of industrial dyes showed 88% decolorization under static condition with significant reduction in TOC (62%) and COD (68%) within 72 h, suggesting potential application of this microbial consortium in bioremediation of dye-containing wastewater.     

Methanol vapor biofiltration coupled with continuous production of recombinant endochitinase Ech42 by Pichia Pastoris

Methanol biofiltration using methylotrophic microorganisms has been previously reported by various authors. In a previous study, a modified strain of Pichia pastoris was tested for the ability to produce endochitinase (Ech42) when coupled with methanol vapor biodegradation in batch tests. The next challenge was to validate the process in a continuous system. Thus, in the present study, a biofilter packed with perlite and inoculated with P. pastoris transformed with the plasmid pPIC-ech42 was used for methanol vapor biofiltration and the continuous production of recombinant endochitinase (Ech42) for 60 days. The maximum elimination capacity (EC) of methanol obtained was 1320 g m^?3 h^?1 at a loading rate of 1465 g m^?3 h^?1. The extracellular protein production rate in the leachate was 2360 μg h^?1 with a chitinase enzymatic activity of 123 U L^?1. The protein content on the biofilm samples was negligible, indicating the effectiveness of the overall process and of P. pastoris to excrete proteins. The carbon balance indicated that 81% of the consumed methanol was mineralized and 5.8% was incorporated into biomass. The results of this study and the economic balance underscore the promising application of linking methanol vapor biofiltration to the continuous production of recombinant proteins.     

Effects of exposure to sublethal propiconazole on intestine-related biochemical responses in rainbow trout,Oncorhynchus mykiss

The effect of long-term (30 days) exposure to PCZ (0.2, 50, and 500 μg l^?1) on intestine-related biochemical markers in rainbow trout was investigated. Multiple biomarkers were measured, including digestive enzymes (proteolytic enzymes and amylase), antioxidant responses (TBARS, CP, SOD, CAT, GR and GPx) and energy metabolic parameters (RNA/DNA ratio, Na⁺-K⁺-ATPase). Exposure to 500 μg l^?1 PCZ led to significantly inhibited (p < 0.01) proteolytic enzyme and amylase activity. Activities of the antioxidant enzymes SOD, CAT, and GPx gradually increased at lower PCZ concentrations (0.2 and 50 μg l^?1). At the highest concentration (500 μg l^?1), oxidative stress was apparent as significant higher (p < 0.05) lipid peroxidation and protein carbonyls, associated with an inhibition of antioxidant enzymes activity. Moreover, energy metabolic parameters (RNA/DNA ratio, Na⁺-K⁺-ATPase) were significantly inhibited (p < 0.01) in the intestines of fish exposed to 500 μg l^?1 PCZ, compared with controls. We suggest that long-term exposure to PCZ could result in several responses in intestine-related biochemical markers, which potentially could be used as indicators for monitoring residual PCZ present in the aquatic environment.     

Immune responses,ROS generation and the haemocyte damage of scallop Chlamys farreri exposed to Aroclor 1254

The toxic effects of Aroclor 1254 (0.05, 0.5, 5 and 50 μg l^?1) on scallop (Chlamys farreri) immune system in vivo were studied. The results showed that Aroclor 1254 had significant toxic effect on the parameters tested in this paper (P < 0.05). The total number of haemocytes, the proportion of granulocytes, phagocytosis in all groups as well as the lysosomal membrane stability (LMS) in 5, 50 μg l^?1 and bacteriolytic activity 0.5, 5, 50 μg l^?1 treatments decreased significantly, while the proportion of hyalinocytes and the production of O₂^- in all treatments remarkably increased during the sampling time and tended to be stable gradually after 6–15 d. The bacteriolytic activity in 0.05 μg l^?1 treatments, LMS in 0.05, 0.5 μg l^?1 groups and the DNA damage (comet ratios and arbitrary values) in all treatments increased at the beginning of exposure and reached their peaks on day 1, day 1, day 6 and day 3, following that they all decreased gradually and became stable after 9–15 d. When the indices reached stability, except for DNA damage was higher than controls, the others were all significantly lower than those of controls (P < 0.05). Thus, Aroclor 1254 has evident toxic effects on scallop immune system, which supports the view that a relationship exists between pollution and immunomodulation in aquatic organisms. Also it supports the speculation that the PCBs pollution is one of the important reasons of the mass mortality of the C. farreri.     

Optimization of Cd2+ removal by the cyanobacterium Synechocystis pevalekii using the response surface methodology

Response surface methodology (RSM) has been used to optimize the critical parameters responsible for higher Cd²⁺ removal by a unicellular cyanobacterium Synechocystis pevalekii. A three-level Box–Behnken factorial design was used to optimize pH, biomass and metal concentration for Cd²⁺ removal. A coefficient of determination (R²) value (0.99), model F-value (86.40) and its low p-value (F < 0.0001) along with lower value of coefficient of variation (5.61%) indicated the fitness of response surface quadratic model during the present study. At optimum pH (6.48), biomass concentration (0.25 mg protein ml^?1) and metal concentration (5 μg ml^?1) the model predicted 4.29 μg ml^?1 Cd²⁺ removal and experimentally, 4.27 μg ml^?1 Cd²⁺ removal was obtained.     

Fermentative production of succinic acid from straw hydrolysate by Actinobacillus succinogenes

In this work, straw hydrolysates were used to produce succinic acid by Actinobacillus succinogenes CGMCC1593 for the first time. Results indicated that both glucose and xylose in the straw hydrolysates were utilized in succinic acid production, and the hydrolysates of corn straw was better than that of rice or wheat straw in anaerobic fermentation of succinic acid. However, cell growth and succinic acid production were inhibited when the initial concentration of sugar, which was from corn straw hydrolysate (CSH), was higher than 60 g l^?1. In batch fermentation, 45.5 g l^?1 succinic acid concentration and 80.7% yield were attained after 48 h incubation with 58 g l^?1 of initial sugar from corn straw hydrolysate in a 5-l stirred bioreactor. While in fed-batch fermentation, concentration of succinic acid achieved 53.2 g l^?1 at a rate of 1.21 g l^?1 h^?1 after 44 h of fermentation. Our work suggested that corn straw could be utilized for the economical production of succinic acid by A. succinogenes.     

Continuous Cr(VI) removal by Scenedesmus incrassatulus in an airlift photobioreactor

Cr(VI) removal by Scenedesmus incrassatulus was characterized in a continuous culture system using a split-cylinder internal-loop airlift photobioreactor fed continuously with a synthetic effluent containing 1.0 mg Cr(VI) l^?1 at dilution rate (D) of 0.3 d^?1. At steady state, there was a small increase (6%) on the dry biomass (DB) concentration of Cr(VI)-treated cultures compared with the control culture. 1.0 mg Cr(VI) l^?1 reduced the photosynthetic pigments content and altered the cellular morphology, the gain in dry weight was not affected. At steady state, Cr(VI) removal efficiency was 43.5 ± 1.0% and Cr(VI) uptake was 1.7 ± 0.1 mg Cr(VI) g^?1 DB. The system reached a specific metal removal rate of 458 μg Cr(VI) g^?1 DB d^?1, and a volumetric removal rate of 132 μg Cr(VI) l^?1 d^?1.