Effects of sporulation pH on the heat resistance and the sporulation of Bacillus cereus

Spores of Bacillus cereus ATCC 7004, 4342 and 9818 were obtained in nutrient agar at several pH from 5·9 to 8·3. The optimum pH for sporulation was around 7, but good production of spores was obtained in the range 6·5–8·3. With all three strains, D -values clearly dropped with sporulation pH, decreasing by about 65% per pH unit. z -Values were not significantly modified ( P > 0·05) by this factor. Mean z -values of 7·13 °C ± 0·16 for strain 7004, 7·67 °C ± 0·04 for 4342 and 8·80 °C ± 0·64 for 9818 were obtained.     

Heat resistance of Cronobacter species (Enterobacter sakazakii) in milk and special feeding formula

Aim:  To determine D - and z -values of Cronobacter species ( Enterobacter sakazakii ) in different reconstituted milk and special feeding formula and the effect of reconstitution of powdered milk and special feeding formula with hot water on the survival of the micro-organism.
Methods and Results:  Five Cronobacter species (four C. sakazakii isolates and C. muytjensii ) were heated in reconstituted milk or feeding formula pre-equilibrated at 52–58°C for various times or mixed with powdered milk or feeding formula prior to reconstitution with water at 60–100°C. The D -values of Cronobacter at 52–58°C were significantly higher in whole milk (22·10–0·68 min) than in low fat (15·87–0·62 min) or skim milk (15·30–0·51 min) and significantly higher in lactose-free formula (19·57–0·66 min) than in soy protein formula (17·22–0·63 min). The z -values of Cronobacter in reconstituted milk or feeding formula ranged from 4·01°C to 4·39°C. Water heated to ≥70°C and added to powdered milk and formula resulted in a > 4 log₁₀ reduction of Cronobacter .
Conclusions:  The heat resistance of Cronobacter should not allow the survival of the pathogen during normal pasteurization treatment. The use of hot water (≥70°C) during reconstitution appears to be an effective means to reduce the risk of Cronobacter in these products.
Significance and Impact of the Study:  This study supports existing data available to regulatory agencies and milk producers that recommended heat treatments are sufficient to substantially reduce risk from Cronobacter which may be present in these products.     

Effect of rising temperature on the heat resistance of Listeria monocytogenes in meat emulsion

The heat resistance of a strain of L. monocytogenes was determined both in broth and in meat emulsion. The D -values for meat emulsion were approximately two to three times higher than those for broth and also the z -value increased significantly. The micro-organism proved to be more resistant when the cells were heated up slowly (0·5°C/min) to constant temperatures of 60, 63 and 66°C in meat emulsion. The D ₆₀, D ₆₃ and D ₆₆ were, respectively 12·95, 5·4 and 2·3 min. Results may have implications in the survival of Listeria monocytogenes in particular food preparations.     

Immersion heat treatments for inactivation of Salmonella enteritidis with intact eggs

The effects of water-bath immersion heat treatments on the inactivation of Salmonellaenteritidis within intact shell eggs were evaluated. Six pooled strains of Salm. enteritidis ( ca 3×10⁸ cfu, inoculated near the centre of the yolk) were completelyinactivated within 50–57·5 min at a bath temperature of 58°C and within 65–75min at 57°C (an 8·4 to 8·5- D process per egg). Following the initial 24 to35-min come-up period, semilogarithmic survivor curves obtained at 58 and 57°C yieldedapparent decimal reduction times ( D -values) of 4·5 and 6·0 min, respectively.Haugh unit values increased during heating, while yolk index and albumen pH values wereunaffected. Albumen clarity and functionality were affected by the thermal treatments; therefore,extended whip times would be required for meringue preparation using immersion-heated eggwhites. Immersion-heated shell eggs could provide Salmonella -free ingredients for thepreparation of a variety of minimally-cooked foods of interest to consumers and foodserviceoperators.     

Mathematical modelling of the heat resistance of Listeria monocytogenes

The heat resistance of Listeria monocytogenes phagovar 2389/2425/3274/2671/47/108/340 (1992 French outbreak strain) in broth was studied at 55, 60 and 65 °C. Experiments were carried out on bacterial cultures in three different physiological states: cultures at the end of the log phase, cultures heat-shocked at 42 °C for 1 h, and subcultures of cells resistant to prolonged heating. Survivor curves were better fitted using a sigmoidal equation than the classical log-linear model. This approach was justified by the existence of heat resistance distributions within the bacterial populations. Peaks (log₁₀ of heating time) of heat resistance distributions of untreated, heat-shocked, and selected cultures at 55, 60 and 65 °C were 0·34, −0·90 and −1·84 min, 0·74, −0·51 and −1·24 min, and 0·17, −0·94 and−1·45 min, respectively. The widths of the distributions are proportional to 0·29, 0·36and 0·41 min^0·5, 0·26, 0·36 and 0·41 min^0·5, and 0·34, 0·44 and 0·41 min^0·5. An increase in thethermal tolerance could then be induced by sublethal heat shock or by selection of heatresistant cells.     

Note: Influence of different heating media on thermal resistance of Neosartorya fischeri isolated from papaya fruit

E. RAJASHEKHARA, E.R. SURESH AND S. ETHIRAJ. 1996. A heat-resistant mold identified as a strain of Neosartorya fischeri was isolated from microbiologically spoiled papaya fruits. The optimum heat activation temperature and time for the ascospores of the test mold was found to be 80°C for 15–30 min. The decimal reduction times ( D -values) at 85°, 87° and 89°C in phosphate buffer (pH 7·0) as heating medium were 35·25, 11·1 and 3·90 min respectively and hence the calculated z -value was 4·0°C. In grape and mango juices as heating media, the D _80°C and the D _85°C values were increased as the °Brix level raised from 10 to 45. In commercial fruit juices of mango, orange, pineapple and mango-pineapple blend as heating media D _85°C values were greater than those observed for phosphate buffer.     

Heat resistance of Listeria monocytogenes in dairy products as affected by the growth medium

Listeria monocytogenes strains 1151 and Scott A were grown in broth at 30 °C and transferred to half cream, double cream and butter stored at 5 °C to determine the influence of dairy product composition on heat resistance at 52, 56, 60, 64 and 68 °C. Strain 1151 showed a higher heat resistance than strain Scott A. The heat resistance of both strains was higher in the dairy products than in broth, particularly at lower temperatures. A significant difference was observed between log 10 of the D -values in the different dairy products. The D -values obtained for both strains resuspended in all the dairy products would result in efficient elimination of the pathogen at 72·7 °C for 15 s. The highest D -value was 11·30 s at 68 °C and by using a z -value of 6·71 °C it can be determined that at 72·7 °C the D -value would be 1·5 s. The 15 s process would therefore achieve 10 log reductions. The effect of growth conditions on the heat resistance at 60 °C of L. monocytogenes Scott A was also investigated. When the cells were grown in the dairy products themselves, and particularly butter, the heat resistance of Scott A was enhanced; for example, the D -values were 7·15 times higher than in broth. Further studies are required to investigate if this protection against heating exists at higher temperatures, in which case the efficiency of pasteurization treatments or other heat treatments would be considerably lowered.     

Effect of heat treatments on the microbial load of 'nono'

Fresh nono samples were subjected to temperature treatments of 55, 60, 65 and 70°C at holding times of 5, 10, 20 and 30 min. Treatment at 65°C for 30 min was most effective in leaving the least number of viable bacteria (1·97 times 10³ pL 0·04) without affecting the organoleptic quality of the product. Some micro-organisms isolated after the pasteurization treatments were Lactobacillus bulgaricus, L. plantarum, L. helveticus and Streptococcus cremoris while coliform bacteria and fungi did not survive the pasteurization treatments.     

Survival of Listeria monocytogenes in sea water and effect of exposure on thermal resistance

Survival, recoverability and sublethal injury of two strains of Listeria monocytogenes , Scott A and an environmental strain KM, on exposure to sea water at 12·8 or 20·8 °C was determined using in situ diffusion chambers. Plate counts were used to assess recoverability and injury while 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) reduction was used to determine respiratory activity. T₉₀ values (times for 10-fold decreases in numbers of recoverable cells) on non-selective medium (trypticase soya agar with 0·6% yeast extract) at 12·8 and 20·8 °C were 61·7 and 69·2 h for L. monocytogenes Scott A, and 103·0 and 67·0 h for L. monocytogenes KM, respectively. On selective medium (Oxford agar), T₉₀ values at 12·8 and 20·8 °C were 60·6 and 56·9 h for L. monocytogenes Scott A, and 83·0 and 65·9 h for L. monocytogenes KM, respectively. With Scott A, the percentage of sublethally injured cells at 12·8 and 20·8 °C was 1·7 and 17·7%, respectively, while for KM the values were 19·0 and 1·6%, respectively. The fraction of cells reducing CTC but which were not recoverable on plating progressively increased on exposure to sea water. Listeria monocytogenes KM challenged at 58 °C showed an apparent increase in heat resistance after exposure to sea water at 20·8 °C for 7 d ( D ₅₈= 2·64 min) compared with before exposure ( D ₅₈= 1·24). This increase in thermal resistance was not apparent at temperatures greater than 63 °C, and analysis of the best-fit regression lines fitted to the thermal data obtained from the two cell populations indicated that their thermal resistance was not significantly different ( P > 0·05) over the temperature range tested (58–62 °C).     

The effect of recovery conditions on the apparent heat resistance of Bacillus cereus spores

The effect of recovery media and incubation temperature on the apparent heat resistance of three ATCC strains (4342, 7004 and 9818) of Bacillus cereus spores were studied. Nutrient Agar (NA), Tryptic Soy Agar (TSA), Plate Count Agar (PCA) and Milk Agar (MA) as the media and temperatures in the range of 15–40°C were used to recover heated spores. Higher counts of heat injured spores were obtained on PCA and NA. The optimum subculture temperature was about 5°C below the optimum temperature for unheated spores. No significant differences in heat resistance were observed with the different recovery conditions except for strains 4342 and 9818 when MA was used as plating medium.
Large differences in D -values were found among the strains ( D ₁₀₀=0·28 min for 7004; D ₁₀₀=0·99 min for 4342; D ₁₀₀= 4·57 min for 9818). The 7004 strain showed a sub-population with a greater heat resistance. The z values obtained for the three strains studied under the different recovery conditions were similar (7·64°C 0·25).     

Heat-resistant Bacteria in Pasteurized Whole Egg

Samples of egg melange taken from an egg packing station contained an average of 7·3 x 10⁴ organisms/ml which survived laboratory pasteurization at 65°C for 3 min. Many of the organisms surviving pasteurization were found to be coryneform bacteria related to Microbacterium lacticum which could be differentiated into several groups. The remainder were a miscellaneous collection of unidentified cocci and coccobacilli and some Bacillus spp. The coryneform bacteria were shown to be the most heat-resistant isolates with negligible loss of viability after 60 min at 65°C, At least two of the representative strains were very heat-resistant, 0·01% surviving 20 and 38 min at 80°C in phosphate buffer at pH 7·1. Growth tests showed that none of the isolates grew at 5°C after 10 d incubation but those capable of growing most rapidly at 10° and 15°C were also the most heat-resistant. Such strains had a doubling time at 15°C of between 6 and 8 h in whole egg. Freezing the coryneform bacteria in liquid whole egg at –18°C had negligible effect on viability or heat-resistance at 65°C.     

Cultural conditions for production of glucoamylase from Lactobacillus amylovorus ATCC 33621

Lactobacillus amylovorus ATCC 33621 is an actively amylolytic bacterial strain which produces a cell-bound glucoamylase (EC 3.2.1.3). Conditions of growth and glucoamylase production were investigated using dextrose-free de Man-Rogosa-Sharpe (MRS) medium in a 1.5 I fermenter, with varying dextrin concentration (0.1–1.5% (w/v)), pH (4.5–6.5) and temperature (25–55°C). Cell extracts were prepared by subjecting cells to treatment with a French Pressure cell in order to release intracellular proteins. Glucoamylase activity was then assayed. The effects of pH (4.0–9.0), temperature (15–85°C) and substrate (dextrin and starch, 0–2% w/v) concentration on crude enzyme activity were investigated. Optimal growth was obtained in MRS medium containing 1% (w/v) dextrin, at pH 5.5 and 37°C. Glucoamylase production was maximal at the late logarithmic phase of growth, during 16–18 h. Crude enzyme had a pH optimum of 6.0 and temperature optimum of 60°C. With starch as the substrate, maximal activity was obtained at a concentration of 1.5% (w/v). The effects of ions and inhibitors on glucoamylase activity were also investigated. Enzyme activity was not significantly influenced by Ca²⁺ and EDTA at 1 mmol 1⁻¹ concentration; however Pb²⁺ and Co²⁺ were found to inhibit the activity at concentrations of 1 mmol 1⁻¹. The crude enzyme was found to be thermolabile when glucoamylase activity decreased after about 10 min exposure at 60°C. This property can be exploited in the brewing of low calorie beers where only mild pasteurization treatments are used to inactivate enzymes. The elimination of residual enzyme effect would prevent further maltodextrin degradation and sweetening during long-term storage, thus helping to stabilize the flavour of beer.     

Moist-heat disinfection of pathogenic Acanthamoeba cysts

The effect of moist-heat in the disinfection of pathogenic Acanthamoeba cysts was investigated. Temperatures of 56°C or 60°C were not effective in killing cysts of A. polyphaga even after a contact time of 60 min, A 4 log reduction in viability was achieved within 15 min at 65°C and 2 min at 70°C giving decimal reduction rates (D-values) of 3·75 min and 30 s respectively. The ability of a commercial moist-heat contact lens disinfection unit to kill 1 times 10⁵ cysts of Acanthamoeba isolated from contact lens storage cases was also shown. Holding temperatures inside the cases of 65°C for 5·5 min and 70°C (the maximum temperature obtained) for 1 min were recorded during the disinfection cycle.     

Effect of culture age, pre-incubation at low temperature and pH on the thermal resistance of Aeromonas hydrophila

S. CONDON, M.L. GARCIA, A. OTERO AND F.J. SALA. 1992. The thermal resistance of Aeromonas hydrophila strain NCTC 8049 was determined within the range 48°-65°C with a thermoresistometer TR-SC and McIlvaine buffer. The effects of culture age, pre-incubation at 7°C and the pH of the heating menstruum were evaluated. The pattern of thermal death was dependent on culture age. Cells heated in the late logarithmic growth phase (15 h at 30°C) were twice as resistant as those in the early stage (5 h at 30°C), and the maximum D -value was obtained after 72 h incubation (5.5 total increase). The age of the cells did not affect z -values significantly. The heat resistance of cells incubated for 48 h at 30°C increased (twice) after holding at 7°C for 72 h. Pre-incubation at low temperature of older cultures (72 h, 30°C) did not influence their D -values. Maximum heat resistance was found at pH 6.0 and minimal at pH 4.0. Decreasing the pH from 6.0 4.0 reduced D -values by a factor of 5. Although the strain studied was heat-sensitive ( D _55°C= 0.17 min; z = 5.11°C), survivor curves of cultures older than 50 h showed a significant tailing. Organisms surviving in the tails were only slightly more resistant than were the original population.     

Production of alkaline xylanase by an alkaliphilic Bacillus sp. isolated from an alkalinesoda lake

An alkaline xylanase-producing alkaliphilic Bacillus sp. AR-009 was isolated from analkaline soda lake in Ethiopia. The enzyme was optimally active at pH 9 and was stable over abroad pH range. The optimum temperature for xylanase activity, assayed at pH 9, was60°–65°C. Measured at pH 8 and 9, the enzyme had good stability at 55° and60°C. At both pH values, over 80% of its original activity was retained after heating for2·5 h at 55°C. At 60°C, the enzyme maintained 63% of its original activity after2·5 h incubation while at pH 9 it retained 54% of its original activity after 1 h heating. Theseproperties qualify the enzyme to be novel and potentially important for application in someindustrial processes.     

Production and stability of pediocin N5p in grape juice medium

The production and stability of pediocin N5p from Pediococcus pentosaceus , isolated from wine, were examined in grape juice medium. Maximum growth and higher titre (4000 U ml^-1) were observed at a initial pH of 7·5 and 30°C. The activity of the inhibitory substance was stable between pH values from 2·0 to 5·0 at 4° and 30°C. At pH 10·0 it was completely inactivated. When submitted to 30 min at 80°, 100° and 115°C, maximal stability was observed at pH 2·0. Ethanol up to 10% did not affect pediocin activity at acid pH, nor did 40–80 mg 1^-1 SO₂, independently or combined with different ethanol concentrations, affect inhibitory activity.     

Thermal resistance of Enterobacter sakazakii in reconstituted dried-infant formula

Enterobacter sakazakii , designated a unique species in 1980, has been implicated in a rare but severe form of neonatal meningitis, with dried-infant formula being implicated as the mode of transmission. The high mortality rate (40–80%) and the lack of information about this organism led to a study of the heat resistance of Ent. sakazakii in reconstituted dried-infant formula. Ten Canadian Ent. sakazakii strains (5 clinical and 5 food isolates) were used to determine the heat resistance of this organism at 52, 54, 56, 58 and 60°C in reconstituted dried-infant formula. D - values of 54·8, 23·7, 10·3, 4·2 and 2·5 min were obtained for each temperature, respectively. The overall calculated z -value was 5·82°C. In a comparison of the D -values of several members of the Enterobacteriaceae in dairy products, Ent. sakazakii appeared to be one of the most thermotolerant organisms. The importance of process control during manufacture and the use of aseptic procedures during the preparation, use and storage of dried-infant formula is discussed.     

Influence of acidity and initial substrate temperature on germination of Rhizopus oligosporus sporangiospores during tempe manufacture

J.C. DE REU, F.M. ROMBOUTS AND M.J.R. NOUT. 1995. During the soaking of soya beans according to an accelerated acidification method organic acids were formed, resulting in a pH decrease from 6·0 to 3·9. After 24 h of fermentation at 30°C, lactic acid was the major organic acid (2·1% w/v soak water), while acetic acid (0·3% w/v soak water) and citric acid (0·5% w/v soak water) were also found. During cooking with fresh water (ratio raw beans: water, 1: 6·5) the concentrations of lactate/lactic acid and acetate/acetic acid in the beans were reduced by 45% and 51%, respectively.
The effect of organic acids on the germination of Rhizopus olgosporus sporangiospores was studied in liquid media and on soya beans. Germination in aqueous suspensions was delayed by acetic acid: within 6 h no germination occurred at concentrations higher than 0·05% (w/v incubation medium), at pH 4·0. When soya beans were soaked in the presence of acetic acid, the inhibitory concentration depended on the pH after soaking. Lactic acid and citric acid enhanced germination in liquid medium, but not in tempe.
Inoculation of soya beans with R. oligosporus at various temperatures followed by incubation at 30°C resulted in both increased and decreased periods for the lag phase of fungal growth. A maximum difference of 3 h lag phase was found between initial bean temperatures of 25 and 37°C.
When pure cultures of homofermentative lactic acid bacteria were used in the initial soaking process, less lactic acid and acetic acid was formed during soaking than when the accelerated acidification method was used. This resulted in a reduction of the lag phase before growth of R. oligosporus by up to 4·7 h.     

Effects of temperature on metal tolerance and the accumulation of Zn and Pb by metal-tolerant fungi isolated from urban runoff treatment wetlands

Aims:  To investigate the ability of two fungi to accumulate Zn and Pb, the effect of temperature on their metal tolerance and possible mechanisms involved in metal accumulation.
Methods and results:  Beauveria bassiana and Rhodotorula mucilaginosa isolated from constructed wetlands receiving urban runoff were grown in modified glycerol asparagine medium containing elevated levels of Zn and Pb at 30°C. Beauveria bassiana accumulated up to 0·64% of available Zn and 8·44% of Pb. The corresponding values for R. mucilaginosa were up to 2·05% for Zn and 16·55% for Pb. Radial growth of colonies grown at 4° and 30°C on agar containing Zn or Pb indicated that metal tolerance was not seriously affected by a decrease in temperature. Transmission electron microscopy and emission dispersion x-ray spectrophotometry suggested that the mechanism of resistance in B. bassiana may be associated with the precipitation of Pb (possibly in the form of oxalates).
Conclusion:  The processes of biosorption could potentially occur throughout the year with both living and dead cells able to accumulate metals.
Significance and Impact of the Study:  Identified precipitation processes could be an important mechanism in metal removal in wetland substrates serving as long-term storage sinks.     

Partial purification, characterization and regulation of cellulolytic enzymes from Trichoderma longibrachiatum

A net purification of 9·46-, 18·6- and 16·7-fold for filter paper (FP) hydrolytic activity, carboxymethyl (CM) cellulase and β-glucosidase, respectively was achieved through ion exchange and gel chromatographies. The purified enzyme preparation showed an optimal pH of 5·0 for CM cellulase and 5·5 for the other two components. The enzyme activities increased up to 60°–65°C for the three enzyme components and they were stable at 30° or 40°C and pH 4·5 to 5·0 after 20–30 min treatment. The four enzyme components, that is, two FP activities (unadsorbed and adsorbed), a CM cellulase and a β-glucosidase, had K_m values of 47·6 mg, 33·3 mg, 4·0 mg and 0·18 mmol/l with V _max of 4, 1·28, 66·5 and 1·28 units per mg protein. The molecular weights as determined with SDS-PAGE were found to be 44000, 38000, 55000 and 63000 for the above four enzyme components in the same sequence. A distinct type of synergistic action was observed between these components by their action on dewaxed cotton. Glycerol at 1% strongly repressed the formation of all the cellulolytic enzymes. The role of proteolytic enzymes in in vitro inactivation of cellulases was not apparent.