Functional consequences of mutating conserved SF2 helicase motifs in the Type III restriction endonuclease EcoP15I translocase domain

For efficient DNA hydrolysis, Type III restriction endonuclease EcoP15I interacts with two inversely oriented recognition sites in an ATP-dependent process. EcoP15I consists of two methylation (Mod) subunits and a single restriction (Res) subunit yielding a multifunctional enzyme complex able to methylate or to hydrolyse DNA. Comprehensive sequence alignments, limited proteolysis and mass spectroscopy suggested that the Res subunit is a fusion of a motor or translocase (Tr) domain of superfamily II helicases and an endonuclease domain with a catalytic PD…EXK motif. In the Tr domain, seven predicted helicase motifs (I, Ia, II–VI), a recently discovered Q-tip motif and three additional regions (IIIa, IVa, Va) conserved among Type III restriction enzymes have been identified that are predicted to be involved in DNA binding and ATP hydrolysis. Because DNA unwinding activity for EcoP15I (as for bona fide helicases) has never been found and EcoP15I ATPase rates are only low, the functional importance of the helicase motifs and regions was questionable and has never been probed systematically. Therefore, we mutated all helicase motifs and conserved regions predicted in Type III restriction enzyme EcoP15I and examined the functional consequences on EcoP15I enzyme activity and the structural integrity of the variants by CD spectroscopy. The resulting eleven enzyme variants all, except variant IVa, are properly folded showing the same secondary structure distribution as the wild-type enzyme. Classical helicase motifs I–VI are important for ATP and DNA cleavage by EcoP15I and mutations therein led to complete loss of ATPase and cleavage activity. Among the catalytically inactive enzyme variants three preserved the ability to bind ATP. In contrast, newly assigned motifs Q-tip, Ia and Va are not essential for EcoP15I activity and the corresponding enzyme variants were still catalytically active. DNA binding was only marginally reduced (2–7 fold) in all enzyme variants tested.     

Scanning force microscopy of DNA translocation by the Type III restriction enzyme EcoP15I

Type III restriction enzymes are multifunctional heterooligomeric enzymes that cleave DNA at a fixed position downstream of a non-symmetric recognition site. For effective DNA cleavage these restriction enzymes need the presence of two unmethylated, inversely oriented recognition sites in the DNA molecule. DNA cleavage was proposed to result from ATP-dependent DNA translocation, which is expected to induce DNA loop formation, and collision of two enzyme-DNA complexes. We used scanning force microscopy to visualise the protein interaction with linear DNA molecules containing two EcoP15I recognition sites in inverse orientation. In the presence of the cofactors ATP and Mg(2+), EcoP15I molecules were shown to bind specifically to the recognition sites and to form DNA loop structures. One of the origins of the protein-clipped DNA loops was shown to be located at an EcoP15I recognition site, the other origin had an unspecific position in between the two EcoP15I recognition sites. The data demonstrate for the first time DNA translocation by the Type III restriction enzyme EcoP15I using scanning force microscopy. Moreover, our study revealed differences in the DNA-translocation processes mediated by Type I and Type III restriction enzymes.     

Subunit assembly and mode of DNA cleavage of the type III restriction endonucleases EcoP1I and EcoP15I

DNA cleavage by type III restriction endonucleases requires two inversely oriented asymmetric recognition sequences and results from ATP-dependent DNA translocation and collision of two enzyme molecules. Here, we characterized the structure and mode of action of the related EcoP1I and EcoP15I enzymes. Analytical ultracentrifugation and gel quantification revealed a common Res(2)Mod(2) subunit stoichiometry. Single alanine substitutions in the putative nuclease active site of ResP1 and ResP15 abolished DNA but not ATP hydrolysis, whilst a substitution in helicase motif VI abolished both activities. Positively supercoiled DNA substrates containing a pair of inversely oriented recognition sites were cleaved inefficiently, whereas the corresponding relaxed and negatively supercoiled substrates were cleaved efficiently, suggesting that DNA overtwisting impedes the convergence of the translocating enzymes. EcoP1I and EcoP15I could co-operate in DNA cleavage on circular substrate containing several EcoP1I sites inversely oriented to a single EcoP15I site; cleavage occurred predominantly at the EcoP15I site. EcoP15I alone showed nicking activity on these molecules, cutting exclusively the top DNA strand at its recognition site. This activity was dependent on enzyme concentration and local DNA sequence. The EcoP1I nuclease mutant greatly stimulated the EcoP15I nicking activity, while the EcoP1I motif VI mutant did not. Moreover, combining an EcoP15I nuclease mutant with wild-type EcoP1I resulted in cutting the bottom DNA strand at the EcoP15I site. These data suggest that double-strand breaks result from top strand cleavage by a Res subunit proximal to the site of cleavage, whilst bottom strand cleavage is catalysed by a Res subunit supplied in trans by the distal endonuclease in the collision complex.     

Type III restriction endonuclease EcoP15I is a heterotrimeric complex containing one Res subunit with several DNA-binding regions and ATPase activity

For efficient DNA cleavage, the Type III restriction endonuclease EcoP15I communicates with two inversely oriented recognition sites in an ATP-dependent process. EcoP15I consists of methylation (Mod) and restriction (Res) subunits forming a multifunctional enzyme complex able to methylate or to cleave DNA. In this study, we determined by different analytical methods that EcoP15I contains a single Res subunit in a Mod(2)Res stoichiometry. The Res subunit comprises a translocase (Tr) domain carrying functional motifs of superfamily 2 helicases and an endonuclease domain with a PD..D/EXK motif. We show that the isolated Tr domain retains ATP-hydrolyzing activity and binds single- and double-stranded DNA in a sequence-independent manner. To localize the regions of DNA binding, we screened peptide arrays representing the entire Res sequence for their ability to interact with DNA. We discovered four DNA-binding regions in the Tr domain and two DNA-binding regions in the endonuclease domain. Modelling of the Tr domain shows that these multiple DNA-binding regions are located on the surface, free to interact with DNA. Interestingly, the positions of the DNA-binding regions are conserved among other Type III restriction endonucleases.     

Counting CAG repeats in the Huntington's disease gene by restriction endonuclease EcoP15I cleavage

Huntington's disease (HD) is a progressive neurodegenerative disorder with autosomal-dominant inheritance. The disease is caused by a CAG trinucleotide repeat expansion located in the first exon of the HD gene. The CAG repeat is highly polymorphic and varies from 6 to 37 repeats on chromosomes of unaffected individuals and from more than 30 to 180 repeats on chromosomes of HD patients. In this study, we show that the number of CAG repeats in the HD gene can be determined by restriction of the DNA with the endonuclease EcoP15I and subsequent analysis of the restriction fragment pattern by electrophoresis through non-denaturing polyacrylamide gels using the ALFexpress DNA Analysis System. CAG repeat numbers in the normal (30 and 35 repeats) as well as in the pathological range (81 repeats) could be accurately counted using this assay. Our results suggest that this high-resolution method can be used for the exact length determination of CAG repeats in HD genes as well as in genes affected in related CAG repeat disorders.     

Type III DNA restriction and modification systems EcoP1 and EcoP15. Nucleotide sequence of the EcoP1 operon, the EcoP15 mod gene and some EcoP1 mod mutants

This paper presents the nucleotide sequence of the mod-res operon of phage P1, which encodes the two structural genes for the EcoP1 type III restriction and modification system. We have also sequenced the mod gene of the allelic EcoP15 system. The mod gene product is responsible for binding the system-specific DNA recognition sequences in both restriction and modification; it also catalyses the modification reaction. A comparison of the two mod gene product sequences shows that they have conserved amino and carboxyl ends but have completely different sequences in the middle of the molecules. Two alleles of the EcoP1 mod gene that are defective in modification but not in restriction were also sequenced. The mutations in both alleles lie within the non-conserved regions.     

DNA recognition and cleavage by the EcoP15 restriction endonuclease.

EcoP15 is a restriction-modification enzyme coded by the P15 plasmid of Escherichia coli. We have determined the sites recognized by this enzyme on pBR322 and simian virus 40 DNA. The enzyme recognizes the sequence:

In restriction, the enzyme cleaves the DNA 25 to 26 base-pairs 3′ to this sequence to leave single-stranded 5′ protrusions two bases long.     

Role of ATP in the cleavage mechanism of the EcoP15 restriction endonuclease

The EcoP15 restriction endonuclease forms complexes at specific sites on unmodified DNA both in the presence and in the absence of S-adenosyl-l-methionine. ATP acts as an allosteric effector of EcoP15 and induces DNA cleavage followed by release of the enzyme from the DNA. The efficiency of endonucleolytic scission varies from site to site. The nucleotide sequences at sites that are cleaved at a high frequency were compared.     

Structural domains in the type III restriction endonuclease EcoP15I: characterization by limited proteolysis, mass spectrometry and insertional mutagenesis

The Type III restriction endonuclease EcoP15I forms a hetero-oligomeric enzyme complex that consists of two modification (Mod) subunits and two restriction (Res) subunits. Structural data on Type III restriction enzymes in general are lacking because of their remarkable size of more than 400 kDa and the laborious and low-yield protein purification procedures. We took advantage of the EcoP15I-overexpressing vector pQEP15 and affinity chromatography to generate a quantity of EcoP15I high enough for comprehensive proteolytic digestion studies and analyses of the proteolytic fragments by mass spectrometry. We show here that in the presence of specific DNA the entire Mod subunit is protected from trypsin digestion, whereas in the absence of DNA stable protein domains of the Mod subunit were not detected. In contrast, the Res subunit is comprised of two trypsin-resistant domains of approximately 77-79 kDa and 27-29 kDa, respectively. The cofactor ATP and the presence of DNA, either specific or unspecific, are important stabilizers of the Res subunit. The large N-terminal domain of Res contains numerous functional motifs that are predicted to be involved in ATP-binding and hydrolysis and/or DNA translocation. The C-terminal small domain harbours the catalytic center. Based on our data, we conclude that both structural Res domains are connected by a flexible linker region that spans 23 amino acid residues. To confirm this conclusion, we have investigated several EcoP15I enzyme mutants obtained by insertion mutagenesis in and around the predicted linker region within the Res subunit. All mutants tolerated the genetic manipulation and did not display loss of function or alteration of the DNA cleavage position.     

Counting CAG repeats in the Huntington’s disease gene by restriction endonuclease EcoP15I cleavage

Huntington’s disease (HD) is a progressive neurodegenerative disorder with autosomal-dominant inheritance. The disease is caused by a CAG trinucleotide repeat expansion located in the first exon of the HD gene. The CAG repeat is highly polymorphic and varies from 6 to 37 repeats on chromosomes of unaffected individuals and from more than 30 to 180 repeats on chromosomes of HD patients. In this study, we show that the number of CAG repeats in the HD gene can be determined by restriction of the DNA with the endonuclease EcoP15I and subsequent analysis of the restriction fragment pattern by electrophoresis through non-denaturing polyacrylamide gels using the ALFexpress DNA Analysis System. CAG repeat numbers in the normal (30 and 35 repeats) as well as in the pathological range (81 repeats) could be accurately counted using this assay. Our results suggest that this high-resolution method can be used for the exact length determination of CAG repeats in HD genes as well as in genes affected in related CAG repeat disorders.     

A mutation in the Mod subunit of EcoP15I restriction enzyme converts the DNA methyltransferase to a site-specific endonuclease

A closer inspection of the amino acid sequence of EcoP15I DNA methyltransferase revealed a region of similarity to the PDXn(D/E)XK catalytic site of type II restriction endonucleases, except for methionine in EcoP15I DNA methyltransferase instead of proline. Substitution of methionine at position 357 by proline converts EcoP15I DNA methyltransferase to a site-specific endonuclease. EcoP15I-M357P DNA methyltransferase specifically binds to the recognition sequence 5'-CAGCAG-3' and cleaves DNA asymmetrically EcoP151-M357P.DNA methyltransferase specifically binds to the recognition sequence 5'-CAGCAG-3' and cleaves DNA asymmetrically, 5'-CAGCAG(N)(10)-3', as indicated by the arrows, in presence of magnesium ions.     

Use of affinity chromatography for the purification of specific endonuclease Eco RI and Bg1 II

The highly active preparations of specific endonucleases Eco RI and Bgl II were purified by affinity chromatography from E. coli and Bacillus globiggii cells, respectively. The isolation and purification procedures included cell disruption by ultrasonication, ultracentrifugation and chromatography. Blue dextrane-Sepharose, folate-Sepharose and phenyl-Sepharose were used as affinity adsorbents. The optimal conditions for the adsorption and elution of the endonucleases excluding intermediate steps of dialysis and concentration were selected. A high degree of purification was achieved by a consecutive use of adsorbents with different ligands. The purified enzyme does not contain non-specific nucleases or phosphatases, is sufficiently concentrated and can be used for specific hydrolysis of DNA.     

Characterization of the Type III restriction endonuclease PstII from Providencia stuartii

A new Type III restriction endonuclease designated PstII has been purified from Providencia stuartii. PstII recognizes the hexanucleotide sequence 5′-CTGATG(N)_25-26/27-28-3′. Endonuclease activity requires a substrate with two copies of the recognition site in head-to-head repeat and is dependent on a low level of ATP hydrolysis (~40 ATP/site/min). Cleavage occurs at just one of the two sites and results in a staggered cut 25–26 nt downstream of the top strand sequence to generate a two base 5′-protruding end. Methylation of the site occurs on one strand only at the first adenine of 5′-CATCAG-3′. Therefore, PstII has characteristic Type III restriction enzyme activity as exemplified by EcoPI or EcoP15I. Moreover, sequence asymmetry of the PstII recognition site in the T7 genome acts as an historical imprint of Type III restriction activity in vivo. In contrast to other Type I and III enzymes, PstII has a more relaxed nucleotide specificity and can cut DNA with GTP and CTP (but not UTP). We also demonstrate that PstII and EcoP15I cannot interact and cleave a DNA substrate suggesting that Type III enzymes must make specific protein–protein contacts to activate endonuclease activity.     

A RecB-family nuclease motif in the Type I restriction endonuclease EcoR124I

The Type I restriction-modification enzyme EcoR124I is an ATP-dependent endonuclease that uses dsDNA translocation to locate and cleave distant non-specific DNA sites. Bioinformatic analysis of the HsdR subunits of EcoR124I and related Type I enzymes showed that in addition to the principal PD-(E/D)xK Motifs, I, II and III, a QxxxY motif is also present that is characteristic of RecB-family nucleases. The QxxxY motif resides immediately C-terminal to Motif III within a region of predicted alpha-helix. Using mutagenesis, we examined the role of the Q and Y residues in DNA binding, translocation and cleavage. Roles for the QxxxY motif in coordinating the catalytic residues or in stabilizing the nuclease domain on the DNA are discussed.     

S-adenosyl methionine prevents promiscuous DNA cleavage by the EcoP1I type III restriction enzyme

DNA cleavage by the type III restriction endonuclease EcoP1I was analysed on circular and catenane DNA in a variety of buffers with different salts. In the presence of the cofactor S-adenosyl methionine (AdoMet), and irrespective of buffer, only substrates with two EcoP1I sites in inverted repeat were susceptible to cleavage. Maximal activity was achieved at a Res2Mod2 to site ratio of approximately 1:1 yet resulted in cleavage at only one of the two sites. In contrast, the outcome of reactions in the absence of AdoMet was dependent upon the identity of the monovalent buffer components, in particular the identity of the cation. With Na+, cleavage was observed only on substrates with two sites in inverted repeat at elevated enzyme to site ratios (>15:1). However, with K+ every substrate tested was susceptible to cleavage above an enzyme to site ratio of approximately 3:1, including a DNA molecule with two directly repeated sites and even a DNA molecule with a single site. Above an enzyme to site ratio of 2:1, substrates with two sites in inverted repeat were cleaved at both cognate sites. The rates of cleavage suggested two separate events: a fast primary reaction for the first cleavage of a pair of inverted sites; and an order-of-magnitude slower secondary reaction for the second cleavage of the pair or for the first cleavage of all other site combinations. EcoP1I enzymes mutated in either the ATPase or nuclease motifs did not produce the secondary cleavage reactions. Thus, AdoMet appears to play a dual role in type III endonuclease reactions: Firstly, as an allosteric activator, promoting DNA association; and secondly, as a "specificity factor", ensuring that cleavage occurs only when two endonucleases bind two recognition sites in a designated orientation. However, given the right conditions, AdoMet is not strictly required for DNA cleavage by a type III enzyme.     

Structural and functional analysis of the symmetrical Type I restriction endonuclease R.EcoR124I(NT)

Type I restriction-modification (RM) systems are comprised of two multi-subunit enzymes, the methyltransferase (～160 kDa), responsible for methylation of DNA, and the restriction endonuclease (～400 kDa), responsible for DNA cleavage. Both enzymes share a number of subunits. An engineered RM system, EcoR124I(NT), based on the N-terminal domain of the specificity subunit of EcoR124I was constructed that recognises the symmetrical sequence GAAN(7)TTC and is active as a methyltransferase. Here, we investigate the restriction endonuclease activity of R. EcoR124I(NT)in vitro and the subunit assembly of the multi-subunit enzyme. Finally, using small-angle neutron scattering and selective deuteration, we present a low-resolution structural model of the endonuclease and locate the motor subunits within the multi-subunit enzyme. We show that the covalent linkage between the two target recognition domains of the specificity subunit is not required for subunit assembly or enzyme activity, and discuss the implications for the evolution of Type I enzymes.     

Overexpression of (His)6-tagged human arginase I in Saccharomyces cerevisiae and enzyme purification using metal affinity chromatography

Arginase (EC 3.5.3.1; L-arginine amidinohydrolase) is a key enzyme of the urea cycle that catalyses the conversion of arginine to ornithine and urea, which is the final cytosolic reaction of urea formation in the mammalian liver. The recombinant strain of the yeast Saccharomyces cerevisiae that is capable of overproducing arginase I (rhARG1) from human liver under the control of the efficient copper-inducible promoter CUP1, was constructed. The (His)(6)-tagged rhARG1 was purified in one step from the cell-free extract of the recombinant strain by metal-affinity chromatography with Ni-NTA agarose. The maximal specific activity of the 40-fold purified enzyme was 1600 μmol min(-1) mg(-1) protein.