Variation in dental occlusion and arches among melanesians of bougainville island,papua New Guinea. I. Methods,age changes,sex differences and population comparisons

Population studies of malocclusion lack comparability because of the subjective criteria employed in the definition of malocclusion. Alternatively, individual characteristics of occlusion can be quantified and compared within and between populations. Measurements were taken from the dental cases of 319 male an 359 female Melanesians from Bougainville, Papua New Guinea. The cross-sectional age changes from 12 to 68 years of age included an increase in intermolar arch width, a decrease in arch length and intercanine arch width, and increased crowding and malalignment. Neither age nor sex accounted for a large proportion of the differences among individuals. When compared to industrialized groups, the Bougainville population had a slight reduction in variance for most characteristics. Only the sagittal molar relationship was markedly less variable on Bougainville. The results emphasize that a quantitative evaluation of individual occlusal variables may reveal differences within and between populations not detected when simple malocclusion frequencies are reported.     

Heritability of dental arch dimensions in humans.

The purposes of this study were to estimate the heritabilities of several human dental arch dimensions and compare the hereditary differences among kinships and among variables. The sample consisted of 102 Japanese families, each including both parents and one of their offspring, and on average all subjects had relatively well-aligned permanent dentitions. The heritabilities of all variables were estimated from the regression of offspring on parent and on midparent. Results showed that genetics played a role regarding dental arch dimensions, and arch perimeter (sum of tooth width) was a more definite genetic-related factor than other arch dimensions, such as width, length, or size. There were few significant hereditary differences between sons and daughters, and between upper and lower arches for each variable. Sex chromosomal involvement was not confirmed, but maternal effects were found to be more evident in daughters than in sons, for both arches. Comparisons among the heritabilities of overall and of anterior arch dimensions indicated that size of the anterior part of the dental arch might be less resistant to environmental factors, especially in case of the lower arch.     

Comparative genetic variance and heritability of dental occlusal variables in U.S. and Northwest Indian twins

Genetic variance analysis of 15 dental occlusal and arch variables is based on cross-cultural comparison of twin variances (U.S. Whites and Northwest Indian Punjabis). Both samples exhibit high genetic versus environmental partition of variance. However, monozygotes and dizygotes have unequal variance, which invalidates conventional genetic variance ratios. The pattern of environmental biases on the zygosities is quite different in the two groups. Revised estimates that acknowledge zygosity heterogeneity (hence unequal environmental influences) are generally much lower for occlusal traits, whereas arch size measurements are unaffected.     

Congenital defects of the upper lateral incisors: Multivariate analysis of measurements of the other teeth,the superior arch,head and face

The survey of a French male population allowed us to ascertain 75 propositi with one or two missing ULI, 59 propositi with one or two reduced ULI and 99 controls on whom measurements (mesiodistal and buccolingual diameters) of all teeth of the superior arch are available. Principal Component Analysis gave a first estimated principal component highly correlated with each of the dental measurements or arch measurements. This size factor was eliminated by observing the plane of the second and third principal components. Strikingly different clusters of MD diameters or BL diameters were observed for the controls, the propositi missing one or two of the ULI and the propositi with reduced ULI. For the controls, the arch length is correlated with the MD molar diameters and the MD incisor diameter, the arch width being isolated from the other measurements. For the propositi with missing ULI, among the dental measurements the MD and BL diameters cluster, the arch length is isolated as are the arch widths. For the propositi with reduced ULI, the arch length is closer to the dental measurements while the widths, especially the first one, are isolated. The best discriminant measurements are the diameters of the first premolars and the canine, the first arch width and the arch length. Among controls, the arch is narrowed and shorter for the propositi with absence and wider for the propositi with reduction. Teeth measurements are always smaller in propositi.     

Genetic distances,geographic distances and migration between four villages of a single region in Slovakia

Genetic microdifferentiation has been studied among four endogamous villages of the Bystrica Valley in the Kysuce region of northwest Slovakia, which arose from a single ancestral population about 15 generations ago. Genetic distances and sample kinship between the villages were estimated from the gene frequencies of seven serum-group and isozyme genetic markers. The genetic distance was found to correlate positively (though insignificantly) with the geographic distance, and negatively with the intensity of migration between villages; the sample kinship correlates negatively with geography as well as with the genetic distance. This pattern of genetic structure within the area indicates that the genetic variation among the villages is attributable to the genetic drift. Thus, drift has brought about a detectable differentiation in the area within a limited period of approximately 300 years, in spite of the fact that the villages were not completely genetically isolated from each other. The finding of a negative correlation between the sample kinship and geographic distance indicates that the recent breakdown of genetic isolates in Slovakia is likely to be accompanied with an overall increase of heterozygosity.     

Interspecific allometry of the mandible,dental arch,and molar area in anthropoid primates: Functional morphology of masticatory components

Allometric equations relating the lengths and widths of the mandible and dental arch, and of molar area, were obtained in a wide range of anthropoid primates grouped into four subsets, pongids, cercopithecids, nonmarmoset platyrrhines, and marmosets. Mandibular width is negatively allometric against length across anthropoids but cercopithecids had relatively wider mandibles than nonmarmosets of the same size class. Mandibular length relative to dental arch length was isometric within and between the four groups but dental arch width scaled negatively against all the other dimensions examined in this study, indicating a functional dissociation between the dental arcade and the bony mandible. Molar area showed various scaling patterns relative to mandibular length (isometry) and width (positive). There were no parameters that scaled positively against body weight across groups, except for molar area in cercopithecids (strongly) and nonmarmoset (moderately). Notable functional specializations include relatively long dental arches in cercopithecoids, related to large, elongate bilophodont molars, and the tendency to increase relative jaw length across the range of anthropoid sizes, reflecting negative allometry of the brain (cranial bicondylar width). We caution that various allometry and functional patterns may be masked by generalizing from broad taxonomic comparison involving a large sweep of adaptative patterns.     

Morphometric dimensions of the left second metacarpal bone in the analysis of the population structure of the island of Hvar

The study of the population structure of the island of Hvar by radiomorphometric methods on the basis of a number of dimensions of the left second metacarpal bone (bone length, width of diaphysis and width of the medullary canal) was carried out on a sample of 822 inhabitants of that island aged between 16 and 85 years. The results were processed by means of multivariate analysis, by discriminative analysis, by distance statistics, and by the analysis of non-parametric correlation between “biological distance” in space of the characteristics under review and geographic distances between individual subpopulations (villages) on the island. The results support the hypothesis that the differences between the ancestrally heterogeneous populations have been preserved in the frequencies of the alleles responsible for shaping the dimensions which define the status of the cortical bone of the peripheral skeleton. The statistically significant correlation found between “biological” geographic distances between individual villages indicates that geographical isolation, inevitably leading also to reproductive isolation, affected the biological structure of the population. In view of the identity of ecological pressures on all populations on the island, the observed heterogeneity in the phenotype of the analyzed characteristics supports the hypothesis of heterogeneity existing also in the frequencies of the alleles responsible for their shaping, and caused by the inhibition of gene flow due to the reproductive isolation of the subpopulation groups on the island. The author would like to express her thanks to Prof. Pavao Rudan, from the Laboratory of Anthropology of the Institute of Medical Research and Industrial Medicine, University of Zagreb, for enabling me to take part in the investigation of microdifferentiation of rural populations in Central Dalmatia and for his invaluable advice and assistance.     

The relationship of dental crowding to tooth size, dental arch width, and arch depth

This study was undertaken to answer the question, "Are there any differences in the mesiodistal tooth diameters, dental arch width and dental arch depth between the crowded and noncrowded dentitions?" The materials submitted for study consisted of the Orthoscan intraoral occlusograms of 89 subjects with well-aligned dentition and those of 74 subjects with gross dental crowding. The tooth size and arch dimensions were measured from these intraoral occlusograms. The data were subjected to statistical treatment for comparison of noncrowded and crowded groups. The findings in this study lead to the following conclusions: The mesiodistal tooth diameters of the crowded group were significantly larger than those of the noncrowded group. The dental arch widths of the crowded group were significantly smaller than those of the noncrowded group. No substantial or significant difference in dental arch depth between the crowded and noncrowded subjects could be noted. From these findings it seems that tooth size and dental arch width are determining factors in the formation of dental crowding. Clinically, these results suggest that in the treatment of dental crowding, extraction of teeth and/or expansion of dental arches should be considered depending on what is the main causative factor.     

儿童下牙弓发育的测量

本研究测量了１９３６名６－１２岁男女儿童的下颌牙弓的宽度和弦长。儿童前牙弓在７－９岁时增长最快,为此时恒尖牙萌出所致,１０岁以后各年龄组均数差异检验没有显著性意义。在整个替牙期,儿童前牙弓宽度约增加２ｍｍ,弦长增加１．８ｍｍ,儿童后牙弓的宽度和弦长约增加１ｍｍ左右。男孩前牙弓宽度比女孩大１ｍｍ左右。后牙弓的宽度和弦箕各年龄组均为男大于女,约１ｍｍ在右。可以把小学年龄阶段儿童的牙列分为乳牙弓、第１恒     

Odontometric microdifferentiation of transplanted Mexican Indian populations: Cuanalan and Saltillo

This study documents odontometric variation in four populations of related genetic background. It is found that the transplanted populations of Cuanalan and Saltillo have undergone significant microdifferentiation in tooth size relative to the two home valley populations. The extent and direction of this microdifferentiation is seen as reflecting differential amounts of admixture from African and European sources in demographic subunits of the two transplanted populations. The dental variables found to discriminate significantly between populations are the same variables predicted to be evolutionarily labile by Butler's Field Theory. Principal component analysis confirms the presence of morphological fields in these data and supports the position that each class has a stable tooth, with stability decreasing with increasing distance from the key tooth. The importance of hybridization in determining which variables significantly discriminate between populations is confounded by the effects of development of the dentition in morphogenetic fields. These data suggest the odontometric data provide an adequate, if somewhat conservative, base from which to evaluate microdifferentiation of human populations.     

Familial similarity in dental arch form and tooth position.

This study was done to quantify and compare similarities in dental arch form and tooth position among individuals of various degrees of biological kinship. The sample consisted of 360 dental casts selected from 102 Japanese families, each including both parents and one of their offspring. Most of the subjects had well-aligned permanent dentitions. Coefficients of dissimilarity were obtained by orienting two standard-sized dental arch diagrams plotted from occlusal photographs to the position of best fit. Dissimilarity between adults and children from different families was computed and served as the control data. With few exceptions, the mean dissimilarity between parents and offspring was smaller than that of the nonfamilial pairings; however, statistical differences were not always significant. Among all the teeth observed, the position of both upper and lower central incisors was found to exhibit the least familial similarity. Analysis of variance among pairings of different sources of variation suggested the existence of significant additive genetic effect, both autosomal and sex-linked. Relative contribution of the additive genetic effect in the total variability of this sample was estimated for dental arch form and tooth position to be in the range of 55-60% and 39-77%, respectively. Autosomal additive genetic effects appear to strongly account for the variation in position of the second premolar and of the first molar.     

Dental arch shape and tooth wear variability

The rapid rate of tooth wear frequently reported among certain contemporary aboriginal populations has often been attributed to dietary form and abrasives. Several investigators have reported a close correlation between food bulk and the wear planes formed over the dental arches, i.e., steep oblique wear vs. flat horizontal planes. In this investigation we demonstrate that arch shape is an additional and a significant factor influencing the distribution of wear facets and exposed dentin over occlusal surfaces. We examined 64 dental stone casts of Aboriginals from Yuendumu, Central Australia, born between 1900 and 1940. These casts offer a record of the variety of tooth wear and arch forms and their interrelationships. This group of individuals, some subsisting on abrasive and some on soft diets, have dentition which exhibit various wear rates and wear patterns probably due to the diversity of arch shape, size, and occlusal relationships. Hypsiloid or U-shaped maxillas had a more buccally directed wear in contrast to the parabolic or hyperbolic forms, which exhibit a heavier lingual loading. Varying occlusal conditions also contribute to differing wear patterns over the arches. Individuals with alternate intercuspation, for example, have a more horizontally directed wear. These and other conditions of shape, size, and occlusion emphasize the importance of morphological factors in the production of tooth wear rates and patterns in addition to dietary abrasives.     

Relationships between the size and spatial morphology of human masseter and medial pterygoid muscles, the craniofacial skeleton, and jaw biomechanics

The relationship between human craniofacial morphology and the biomechanical efficiency of bite force generation in widely varying muscular and skeletal types is unknown. To address this problem, we selected 22 subjects with different facial morphologies and used magnetic resonance imaging, cephalometric radiography, and data from dental casts to reconstruct their craniofacial tissues in three dimensions. Conventional cephalometric analyses were carried out, and the cross-sectional sizes of the masseter and medial pterygoid muscles were measured from reconstituted sections. The potential abilities of the muscles to generate bite forces at the molar teeth and mandibular condyles were calculated according to static equilibrium theory using muscle, first molar, and condylar moment arms. On average, the masseter muscle was about 66% larger in cross section than the medial pterygoid and was inclined more anteriorly relative to the functional occlusal plane. There was a significant positive correlation (P less than 0.01) between the cross-sectional areas of the masseter and medial pterygoid muscles (r = 0.75) and between the bizygomatic arch width and masseter cross-sectional area (r = 0.56) and medial pterygoid cross-sectional area (r = 0.69). The masseter muscle was always a more efficient producer of vertically oriented bite force than the medial pterygoid. Putative bite force from the medial pterygoid muscle alone correlated positively with mandibular length and inversely with upper face height. When muscle and tooth moment arms were considered together, a system efficient at producing force on the first molar was statistically associated with a face having a large intergonial width, small intercondylar width, narrow dental arch, forward maxilla, and forward mandible. There was no significant correlation between muscle cross-sectional areas and their respective putative bite forces. This suggests that there is no simple relationship between the tension-generating capacity of the muscles and their mechanical efficiency as described by their spatial arrangement. The study shows that in a modern human population so many combinations of biomechanically relevant variables are possible that subjects cannot easily be placed into ideal or nonideal categories for producing molar force. Our findings also confirm the impression that similar bite-force efficiencies can be found in subjects with disparate facial features.     

Size and shape of the human first permanent molar: a Fourier analysis of the occlusal and equatorial outlines

Form can be viewed as a combination of size and shape. Shape refers to the boundary outline independently from its orientation, relation to reference planes, and dimension (or size). Shape and its changes could be quantified by mathematical methods such as the Fourier series. In this investigation, Fourier analysis has been used to quantify the morphologic characteristics (size and shape) of the outline of the occlusal surface and maximum circumference (equator) in 259 normal, healthy human first permanent maxillary and mandibular molars and to assess the effect of sex. Large within-group variability was found in the Fourier coefficients. Both equatorial and occlusal molar areas were on average larger in male than in female homologous teeth, but the difference was statistically significant only for the equatorial areas. The mean ratios between equatorial and occlusal dental areas were independent from arch (maxillary and mandibular), side, or sex. Both equatorial and occlusal outlines of left and right homologous molars within sex and arch were similar, without size and shape differences. Similarly, no sex differences in shape were found in the comparison of homologous teeth. The method used in the present study could supply information about dental shape in both its entirety and local variations. In particular, the method is extremely sensitive to local variations in dental shape, and it could be usefully employed to compare single teeth to a standard.     

Morphologic variation in the cranium and mandible of the white-tailed deer (Odocoileus virginianus): A comparative study of geographical and four biological distances

Several biological distances based on cranial and mandibular variation among breeding groups of white-tailed deer were calculated and compared with geographic distances among the groups. Distances based on epigenetic variation among ten groups were calculated using 16 non-metric variants of the cranium and mandible. Penrose's size and shape distances and Mahalanobis' D² distance were calculated for 11 groups; the calculations were based on seven skeletal and seven dental metric variables of the mandible. The biological distances were correlated with geographic distance as follows: the epigenetic distance, 0.74; Penrose's shape distance, 0.71; Penrose's size distance, 0.45; and Mahalanobis' distance, 0.37. All correlations were significant at the 0.01 level. The epigenetic and Penrose shape correlations were significantly higher than the Mahalanobis correlation. Because of the conditions under which the breeding groups were selected, it was assumed that genetic affinites among the groups would be a function of geographic distance. The results suggest that the epigenetic distance and Penrose's shape distance reflect genetic affinities among groups better than do the Penrose size and Mahalanobis distances.     

Changing occlusal variation in Pima Amerinds

Occlusal variables and arch measurements have been recorded on 341 Pima Amerinds pertaining to two samples, one of older individuals raised on traditional diets, the other of younger individuals raised on refined commercial foods that are typical of modern urbanized people. Permanent dental occlusion is significantly more variable from defined ideals in the younger sample, despite their fewer deformities resulting from progressive aging. The youths had relatively narrower palates, correlating with a general trend among industrialized populations and also among experimental animals fed soft diets. Relative rate of deciduous tooth loss and replacement did not correlate with any occlusal variable.     

Birotundal diameter of the human sphenoid bone from age six years to early adulthood

Longitudinal data for a twenty-year period are presented for a dimension of the human sphenoid bone as seen on postero-anterior roentgenograms of 22 males and 18 females (healthy, American-born Caucasoids). Birotundal diameter measured as the distance between the centers of the right and left foramen rotundum averaged near 32.0 mm for each sex at age 6 years. Individual increase in size to age 26 years ranged between 3.2 mm and 8.3 mm. There is no correlation between size at age 6 years and change between this age and early adulthood. For 54 males and 50 females at age 9 years, intercorrelations were obtained among six variables: birotundal diameter, head breadth, bizygomatic diameter, bigonial diameter, upper and loweer dental arch widths at the permanent first molars. The r's were nonsignificant or low positive (with the exception of upper-lower dental arch, r = 0.76). The results of this study are aligned with three previous studies of human cranial base width.     

Measurements of tooth wear among Australian Aborigines: I. Serial loss of the enamel crown

The dental casts made from Aboriginal children during the course of a longitudinal growth study in Central Australia provided material for analyzing tooth wear under known environmental conditions. The wear facets produced on the occlusal surfaces were clearly preserved on the dental stone casts and recorded the progress of enamel attrition from ages 6 to 18. These casts were photographed and traced by electronic planimetric methods that automatically recorded the location and size of wear facets on the first and second permanent molars. These areas of worn tooth surface were compared to the total tooth surface. The worn surface was regressed on age to calculate wear rates of each tooth. Discriminant analyses were also performed to determine the significance of dental attrition differences between the sexes at each age group. The total wear on each tooth was highly correlated with age as expected but females wore their teeth at a significantly higher rate than males. The mandibular molars wore more rapidly than maxillary teeth in both sexes. The discriminant analysis successfully grouped 91% of the cases according to age and sex. Pattern of wear, the location, and size of wear facets also differed between age groups and sex. The questions of why there is a difference between male and female wear or why there is greater wear on one arch or arch region have no ready answers. The differing rates and pattern of dental wear do suggest that arch shape and growth rates may be the answer though it has yet to be tested. However, the occlusal surface wear is useful for age estimation in a population and provides a record of shifting masticatory forces during growth.     

秦岭野生大熊猫牙齿的形态机能

大熊猫(Ailuropoda melanoleuca)是国家一级保护动物,被誉为国宝.牙齿作为大熊猫消化器官之一,相对于其他动物而言,大熊猫牙齿有其自身的构造特点.以往学者和专家对大熊猫牙齿形态的研究侧重于为大熊猫的种群分类寻找根据(Dvadi,1869; Milne-Edwards,1870;王将克,1974),更多关注牙齿在大熊猫进化、演变过程中的意义(王令红等,1982;黄万波,1993).研究的齿位大多局限于臼齿(张鹤宇和刘理,1959),所得结果或数据并不详细和全面.此外,还有一些学者对大熊猫牙齿釉质的超微组织结构进行研究(赵资奎等,1984 ).     

Oro-maxillofacial development in patients with Turner's syndrome

Detailed oro-maxillofacial studies using dental casts, pantomograms and cephalograms were performed in 28 patients with Turner's syndrome and compared statistically to the results from 23 normal short children. Small tooth crown size, short tooth roots and advanced dental age were characteristic of patients with Turner's syndrome. However, the incidence of peg shaped teeth, malocclusion, high arched palate and congenital anodontia were not characteristic of patients with Turner's syndrome. The coronal arch width (C.A.W.) and basal arch width (B.A.W.) were greater and the coronal arch length (C.A.L.) and basal arch length (B.A.L.) were less in patient's with Turner's syndrome. These data indicate underdevelopment of the maxilla in the forward direction forming the wide-, flat-shaped facial characteristic of patients with Turner's syndrome.