Novel Route to Fe‐Based Cathode as an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Efficient bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are of great importance for rechargeable metal–air batteries. Herein, FeN_x/C catalysts are synthesized by pyrolysis of thiourea and agarose containing α‐Fe₂O₃ nanoplate as Fe precursor, where α‐Fe₂O₃ nanoplate can prevent the aggregation of carbon sheets to effectively improve the specific surface area during the carbonization process. The FeN_x/C‐700‐20 catalyst displays excellent catalytic performance for both ORR and OER activity in alkaline conditions with more positive onset potential (1.1 V vs the reversible hydrogen electrode) and half‐wave potential, higher stability, and stronger methanol tolerance in alkaline solution, which are all superior to that of the commercial Pt/C catalyst. In this study, the detailed analyses demonstrate that the coexistence of Fe‐based species and high content of Fe‐N_x both play an important role for the catalytic activity. Furthermore, FeN_x/C‐700‐20 as cathode catalyst in Zn–air battery possesses higher charge–discharge stability and power density compared with that of commercial Pt/C catalyst, displaying great potential in practical implementation of for the rechargeable energy devices.     

Enhanced Stability and Thickness‐Independent Oxygen Evolution Electrocatalysis of Heterostructured Anodes with Buried Epitaxial Bilayers

Achieving high oxygen evolution reaction (OER) activity while maintaining performance stability is a key challenge for designing perovskite structure oxide OER catalysts, which are often unstable in alkaline environments transforming into an amorphous phase. While the chemical and structural transformation occurring during electrolysis at the electrolyte–catalyst interface is now regarded as a crucial factor influencing OER activity, here, using La_0.7Sr_0.3CoO_3?δ (LSCO) as an active OER catalyst, the critical influence of buried layers on the oxidation current stability in nanoscopically thin, chemically and structurally evolving, catalyst layers is revealed. The use of epitaxial thin films is demonstrated to engineer both depletion layer widths and chemical stability of the catalyst support structure resulting in heterostructured anodes that maintain facile transport kinetics across the electrolyte–anode interface for atomically thin (2–3 unit cells) LSCO catalyst layers and greatly enhanced oxidation current stability as the perovskite structure OER catalysts chemically and structurally transform. This work opens up an approach to design robust and active heterostructured anodes with dynamically evolving ultrathin OER electrocatalyst layers for future green fuel technologies such as conformal coatings of high‐density 3D anode topologies for water splitting.     

DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.     

A Tannic Acid–Derived N‐, P‐Codoped Carbon‐Supported Iron‐Based Nanocomposite as an Advanced Trifunctional Electrocatalyst for the Overall Water Splitting Cells and Zinc–Air Batteries

Rational design and construction of a multifunctional electrocatalyst featuring with high efficiency and low cost is fundamentally important to realize new energy technologies. Herein, a trifunctional electrocatalyst composed of FeP_x nanoparticles and Fe–N–C moiety supported on the N‐, P‐codoped carbon (NPC) is masterly synthesized by a facile one‐pot pyrolysis of the mixture of tannic acid, ferrous chloride, and sodium hydrogen phosphate. The synergy of each component in the FeP_x/Fe–N–C/NPC catalyst renders high catalytic activities and excellent durability toward both oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The electrocatalytic performance and practicability of the robust FeP_x/Fe–N–C/NPC catalyst are further investigated under the practical operation conditions. Particularly, the overall water splitting cell assembled by the FeP_x/Fe–N–C/NPC catalyst only requires a voltage of 1.58 V to output the benchmark current density of 10 mA cm^?2, which is superior to that of IrO₂–Pt/C‐based cell. Moreover, the FeP_x/Fe–N–C/NPC‐based zinc–air batteries deliver high round‐trip efficiency and remarkable cycling stability, much better than that of Pt/C–IrO₂ pair‐based batteries. This work offers a new strategy to design and synthesize highly effective multifunctional electrocatalysts using cheaper tannic acid derived carbon as support applied in electrochemical energy devices.     

An Integrated Experimental and Computational Approach for Characterizing the Kinetics and Mechanism of Triadimefon Racemization

Enantiomers of chiral molecules commonly exhibit differing pharmacokinetics and toxicities, which can introduce significant uncertainty when evaluating biological and environmental fates and potential risks to humans and the environment. However, racemization (the irreversible transformation of one enantiomer into the racemic mixture) and enantiomerization (the reversible conversion of one enantiomer into the other) are poorly understood. To better understand these processes, we investigated the chiral fungicide, triadimefon, which undergoes racemization in soils, water, and organic solvents. Nuclear magnetic resonance (NMR) and gas chromatography / mass spectrometry (GC/MS) techniques were used to measure the rates of enantiomerization and racemization, deuterium isotope effects, and activation energies for triadimefon in H₂O and D₂O. From these results we were able to determine that: 1) the alpha‐carbonyl carbon of triadimefon is the reaction site; 2) cleavage of the C‐H (C‐D) bond is the rate‐determining step; 3) the reaction is base‐catalyzed; and 4) the reaction likely involves a symmetrical intermediate. The B3LYP/6–311 + G** level of theory was used to compute optimized geometries, harmonic vibrational frequencies, nature population analysis, and intrinsic reaction coordinates for triadimefon in water and three racemization pathways were hypothesized. This work provides an initial step in developing predictive, structure‐based models that are needed to identify compounds of concern that may undergo racemization. Chirality 28:633–641, 2016. © 2016 Wiley Periodicals, Inc.     

Synthetic Method for 2,2'‐Disubstituted Fluorinated Binaphthyl Derivatives and Application as Chiral Source in Design of Chiral Mono‐Phosphoric Acid Catalyst

A practical synthetic method for 2,2'‐disubstituted fluorinated binaphthyl derivatives was achieved using magnesium bis(2,2,6,6‐tetramethylpiperamide) [Mg(TMP)₂], prepared from LiTMP (2 equiv) and MgBr₂ (1 equiv), which allows for access to a variety of fluorinated binaphthyl compounds. The utility of the fluorinated binaphthyl backbone was evaluated in F₁₀BINOL derived chiral mono‐phosphoric acid (R)‐ 19 as the chiral Brønsted acid catalyst. The catalyst (R)‐ 19 performs exceptionally well in the catalytic enantioselective imino‐ene reaction, demonstrating the potential of a fluorinated binaphthyl framework. Chirality 27:464–475, 2015. © 2015 Wiley Periodicals, Inc.     

Bimolecular fluorescence quenching reactions of the biologically active coumarin composite 2‐acetyl‐3H‐benzo[f]chromen‐3‐one in different solvents

A study on fluorescence quenching was carried out for the coumarin derivative 2‐acetyl‐3H‐benzo[f]chromen‐3‐one (2AHBC) with aniline at room temperature. Efficient fluorescence quenching was observed and Stern–Volmer (S–V) plots showed upward curves from linearity in all solvents of different polarities. For the solute 2AHBC, ground state complex formation does not hold in our study. The kinetic distance (r) value was found to be greater than the encounter distance (R) and indicated that the quenching reaction was held within the sphere of action. Diffusion‐limited reactions were found to be more prominent in high polarity solvents, namely dimethyl sulfoxide (DMSO), DMF, ACN, methanol, ethanol, propanol and DCM. The relationships between quenching constant (K_SV) and dielectric constants (ε) of the different solvents were studied.     

G‐quadruplex DNA‐based asymmetric catalysis of michael addition: Effects of sonication,ligands, and co‐solvents

There is an escalating interest of using double stranded DNA molecules as a chiral scaffold to construct metal‐biomacromolecule hybrid catalysts for asymmetric synthesis. Several recent studies also evaluated the use of G‐quadruplex DNA‐based catalysts for asymmetric Diels‐Alder and Friedel‐Crafts reactions. However, there is still a lack of understanding of how different oligonucleotides, salts (such as NaCl and KCl), metal ligands and co‐solvents affect the catalytic performance of quadruplex DNA‐based hybrid catalysts. In this study, we aim to systematically evaluate these key factors in asymmetric Michael addition reactions, and to examine the conformational and molecular changes of DNA by circular dichroism (CD) spectroscopy and gel electrophoresis. We achieved up to 95% yield and 50% enantiomeric excess (ee) when the reaction of 2‐acylimidazole 1a and dimethylmalonate was catalyzed by 5′‐G₃(TTAG₃)₃?3′ (G4DNA1) in 20 mM MOPS (pH 6.5) containing 50 mM KCl and 40 µM [Cu(dmbipy)(NO₃)₂], and G4DNA1 was pre‐sonicated in ice bath for 10 min prior to the reaction. G‐quadruplex‐based hybrid catalysts provide a new tool for asymmetric catalysis, but future mechanistic studies should be sought to further improve the catalytic efficiency. The current work presents a systematic study of asymmetric Michael addition catalyzed by G‐quadruplex catalysts constructed via non‐covalent complexing, and an intriguing finding of the effect of pre‐sonication on catalytic efficiency. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:891–898, 2016     

AN EFFICIENT SYSTEM FOR THE ASYMMETRIC ACYLATION OF (R,S)-3-n-BUTYLPHTHALIDE CATALYZED BY NOVOZYME 435

Novozyme 435 could be a highly efficient catalyst in the asymmetric acylation of (R,S)-3-n-butylphthalide in tetrahydrofuran–hexane solvents. The effect of various reaction parameters such as agitation velocity, water content, mixed media, temperature, concentration of Novozyme 435, molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, reaction time, enantiomeric excess of substrate (ee_S), enantiomeric excess of product (ee_P), and enantioselective ratio (E) were studied. Tetrahydrofuran markedly improved (R,S)-3-n-butylphthalide conversion, enantiomeric excess of remaining 3-n-butylphthalide, and enantiomeric ratio. The optimum media were 50% (v/v) tetrahydrofuran and 50% (v/v) hexane. Other ideal reaction conditions were an agitation velocity of 150 rpm, 0.4% (v/v) water content, temperature of 30°C, 8 mg/mL dosage of Novozyme 435, 8:1 (0.4 mmol: 0.05 mmol) molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, and a reaction time of 48 hr. Under the optimum conditions, 96.4% ee_S and 49.3% conversion of (R,S)-3-n-butylphthalide were achieved. In addition, enantiomeric excess of the product was above 98.0%.     

Bacterial degradation of glycol ethers

Assimilation of ethyleneglycol (EG) ethers by polyethyleneglycol-utilizing bacteria was examined. Ethyleneglycol ether-utilizing bacteria were also isolated from soil and activated sludge samples by enrichment-culture techniques. Three strains (4-5-3, EC 1-2-1 and MC 2-2-1) were selected and characterized as Pseudomonas sp. 4-5-3, Xanthobacter autotrophicus, and an unidentified gram-negative, non-spore-forming rod respectively. Their growth characteristics were examined: Pseudomonas sp. 4-5-3 assimilated EG (diethyleneglycol, DEG) monomethyl, monoethyl and monobutyl ethers, DEG, propanol and butanol. X. autotrophicus EC 1-2-1 grew well on EG monoethyl and monobutyl ethers, EG and primary alcohols (C₁-C₄), and slightly on EG monomethyl ether. The strain MC 2-2-1 grew on EG monomethyl ether, EG, primary alcohols (C₁-C₄), and 1,2-propyleneglycol (PG). The mixed culture of Pseudomonas sp. 4-5-3 and X. autotrophicus EC 1-2-1 showed better growth and improved degradation than respective single cultures towards EG monomethyl, monoethyl or monobutyl ethers. Intact cells of Pseudomonas sp. 4-5-3 degraded various kinds of monoalkyl ethers, which cannot be assimilated by the strain. Metabolic products were characterized from reaction supernatants of intact cells of Pseudomonas sp. 4-5-3 with EG or DEG monoethyl ethers: they were analyzed by thin-layer chromatography and GC-MS and found to be ethoxyacetic acid and ethoxyglycoxyacetic acid. Also, PG monoalkyl ethers (C₁-C₄), dipropyleneglycol monoethyl and monomethyl ethers and tripropyleneglycol monomethyl ether were assimilated by polypropyleneglycol-utilizing Corynebacterium sp. 7.     

Microwave‐assisted cleavage of Alloc and Allyl Ester protecting groups in solid phase peptide synthesis

Orthogonal protection of amino acid side chains in solid phase peptide synthesis allows for selective deprotection of side chains and the formation of cyclic peptides on resin. Cyclizations are useful as they may improve the activity of the peptide or improve the metabolic stability of peptides in vivo. One cyclization method often used is the formation of a lactam bridge between an amine and a carboxylic acid. It is desirable to perform the cyclization on resin as opposed to in solution to avoid unwanted side reactions; therefore, a common strategy is to use –Alloc and –OAllyl protecting groups as they are compatible with Fmoc solid phase peptide synthesis conditions. Alloc and –OAllyl may be removed using Pd(PPh₃)₄ and phenylsilane in DMF. This method can be problematic as the reaction is most often performed at room temperature under argon gas. It is not usually done at higher temperatures because of the fear of poisoning the palladium catalyst. As a result, the reaction is long and reagent–intensive. Herein, we report the development of a method in which the –Alloc/–OAllyl groups are removed using a microwave synthesizer under atmospheric conditions. The reaction is much faster, allowing for the removal of the protecting groups before the catalyst is oxidized, as well as being less reagent–intensive. This method of deprotection was tested using a variety of amino acid sequences and side chain protecting groups, and it was found that after two 5‐min deprotections at 38°C, all –Alloc and –OAllyl groups were removed with >98% purity. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Assessment of spectroscopic parameters of solvated Eu(dmh)3phen organometallic complex in various basic and acidic solvents

We report on the comprehension of novel europium activated hybrid organic Eu(dmh)₃phen (Eu: europium, dmh: 2,6‐dimethyl‐3,5‐heptanedione, phen: 1,10 phenanthroline) organo‐metallic complexes, synthesized at different pH values by the solution technique. Photo physical properties of these complexes in various basic and acidic solvents were probed by UV–vis optical absorption and photoluminescence (PL) spectra. Minute differences in optical absorption peaks with variable optical densities were encountered with the variation in solvent from basic (chloroform, toluene, tetrahydrofuran) to acidic (acetic acid) media, revealing bathochromic shift in the absorption peaks. The PL spectra of the complex in various acidic and basic organic solvents revealed the position of the emission peak at 613 nm irrespective of the changes in solvents whereas the excitation spectrum almost matched with that of the UV–vis absorption data. The optical density was found to be maximum for the complex with pH 7.0 whereas it gradually decreased when pH was lowered to 6.0 or raised to 8.0 at an interval of 0.5, demonstrating its pH sensitive nature. Several spectroscopic parameters related to probability of transition such as absorbance A(λ), Napierian absorption coefficient α(λ), molecular absorption cross‐section σ(λ), radiative lifetime (τ₀) and oscillator strength (f) were calculated from UV–vis spectra. The relative intensity ratio (R‐ratio), calculated from the emission spectra was found to be almost the same in all the organic solvents. The optical energy gap, calculated for the designed complexes were found to be well in accordance with the ideal acceptance value of energy gap of the emissive materials used for fabrication of red organic light‐emitting diode (OLED). The relation between Stoke's shift and solvent polarity function was established by Lippert–Mataga plot. This remarkable independence of the electronic absorption spectra of Eu complexes on the nature of the solvent with unique emission wavelength furnishes its potential to serve as a red light emitter for solution processed OLEDs, display panels and solid‐state lighting.     

Perlecan Binds to the β-Amyloid Proteins (Aβ) of Alzheimer's Disease, Accelerates Aβ Fibril Formation, and Maintains Aβ Fibril Stability

Abstract: Perlecan is a specific heparan sulfate proteoglycan that accumulates in the fibrillar β-amyloid (Aβ) deposits of Alzheimer's disease. Perlecan purified from the Engelbreth-Holm-Swarm tumor was used to define perlecan's interactions with Aβ and its effects on Aβ fibril formation. Using a solid-phase binding immunoassay, freshly solubilized full-length Aβ peptides bound immobilized perlecan at two sites, representing both high-affinity [K_D = ～5.8 × 10^?11M for Aβ (1–40); K_D = ～6.5 × 10^?12M for Aβ (1–42)] and lower-affinity [K_D = 3.5 × 10^?8M for Aβ (1–40); K_D = 4.3 × 10^?8M for Aβ (1–42)] interactions. An increase in the binding capacity of Aβ (1–40) to perlecan correlated with an increase in Aβ amyloid fibril formation during a 1-week incubation period. The high-capacity binding of Aβ (1–40) to perlecan was similarly observed using perlecan heparan sulfate glycosaminoglycans and was completely abolished by heparin, but not by chondroitin-4-sulfate. Using a thioflavin T fluorometry assay, perlecan accelerated the rate of Aβ (1–40) amyloid fibril formation, causing a significant increase in Aβ fibril assembly over a 2-week incubation period at 1 h (2.8-fold increase), 1 day (3.6-fold increase), and 3 days (2.8-fold increase) in comparison with Aβ (1–40) alone. Perlecan also initially accelerated the formation of Aβ (1–42) fibrils within 1 h and maintained significantly higher levels of Aβ (1–42) thioflavin T fluorescence throughout a 2-week experimental period in comparison with Aβ (1–42) alone, suggesting perlecan's ability to maintain amyloid fibril stability. Perlecan's effects on Aβ (1–40) fibril formation and maintenance of Aβ (1–42) fibril stability occurred in a dose-dependent manner and was also mediated primarily by perlecan's glycosaminoglycan chains. Perlecan was the most effective enhancer and accelerator of Aβ fibril formation when compared directly with other amyloid plaque components, including apolipoprotein E, α₁-antichymotrypsin, P component, C1q, and C3. This study, therefore, demonstrates that perlecan not only binds to the predominant isoforms of Aβ, but also accelerates Aβ fibril formation and stabilizes amyloid fibrils once formed, confirming pivotal roles for perlecan in the pathogenesis of Aβ amyloidosis in Alzheimer's disease.     

Preparation and separation of methyl ethers of D-arabinose

All possible methyl ethers of methyl β-d-arabinofuranoside and methyl β-d-arabinopyranoside were prepared by partial methylation using Kuhn's method (Ag₂O and MeI in N,N-dimethylformamide) and Haworth's method (Me₂SO₄ and 40% NaOH in water). The ratios of the methyl ethers obtained from the furanoside were found to be considerably more dependent on the method of methylation than those from the pyranoside. All of the methyl ethers of d-arabinofuranose and d-arabinopyranose are separable by thin-layer chromatography on silica gel and paper electrophoresis in borate buffer.     

Large enhancement of oscillating chemiluminescence with [Ru(bpy)3]2+‐catalyzed Belousov–Zhabotinsky reaction in the presence of tri‐n‐propylamine

Oscillating chemiluminescence enhanced by the addition of tri‐n‐propylamine (TPrA) to the typical Belousov–Zhabotinsky (BZ) reaction system catalyzed by ruthenium(II)tris(2.2'‐bipyridine)(Ru(bpy)₃²⁺) was investigated using a luminometry method. The [Ru(bpy)₃]²⁺/TPrA system was first used as the catalyst for a BZ oscillator in a closed system, which exhibited a shorter induction period, higher amplitude and much more stable chemiluminescence (CL) oscillation. The effects of various concentrations of TPrA, oxygen and nitrogen flow rate on the oscillating behavior of this system were examined. In addition, the CL intensity of the [Ru(bpy)₃]²⁺/TPrA–BZ system was found to be inhibited by phenol, thus providing a way for use of the BZ system in the determination of phenolic compounds. Moreover, the possible mechanism of the oscillating CL reaction catalyzed by [Ru(bpy)₃]²⁺/TPrA and the inhibition effects of oxygen and phenol on this oscillating CL system were considered. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of a highly fluorescent N,N‐dimethyl benzylamine–palladium(II) curcuminate complex and its application for determination of trace amounts of water in organic solvents

In this work a new highly fluorescent N,N‐dimethyl benzylamine–palladium(II) yu complex was synthesized by the reaction of [Pd₂{(C,N–C₆H₄CH₂N(CH₃)₂}₂(μ‐OAc)]₂] with curcumin. The structure of the synthesized complex was characterized using Fourier transform infra‐red (FT‐IR) spectroscopy, ¹H nuclear magnetic resonance spectroscopy, and elemental analysis. Fluorescence quantum yield (Φ_F) values of the synthesized complex in dimethyl sulfoxide (DMSO), acetonitrile, ethanol, and methanol were 0.160, 0.104, 0.068, and 0.061, respectively. The fluorescence signal of the complex in the organic solvents was very sensitive to the water content of the organic solvent. The quenching effect of water was used to determine trace amounts of water in the heteroatom‐containing organic solvents (ethanol, methanol, acetonitrile) and redox‐active solvents (DMSO). The linear ranges for determination of water (v/v %) in ethanol, DMSO and acetonitrile were found to be 0.03–14.5, 0.08–13.8, and 0.07–18.8, respectively. Two linear ranges were found for determination of water (v/v %) in methanol (0.1–1.2 and 4.7–25.0). Detection limit (DL) values were calculated to be 0.001, 0.05, 0.004, and 0.01 (v/v %) in ethanol, methanol, acetonitrile, and DMSO, respectively. The proposed method overcomes the problems of the standard Karl Fischer method for determination of water in DMSO. In addition, it gave the best DL value for determination of water in ethanol compared with all published papers to date.     

Tunable Internal and Surface Structures of the Bifunctional Oxygen Perovskite Catalysts

Perovskite oxide ceramics attracts significant attention as a strong candidate of bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalyst for the metal‐air batteries. Numerous approaches to the viability of bifunctional perovskite electrocatalyst represent that the electro­chemical performance is highly correlated with defect chemistry, surface structure, and overall polycrystalline perovskite structure. By making use of the intrinsic flexibility of internal structure and high nonstoichiometry in perovskite oxide, the heat treatment effect of the complex Ba_0.5Sr_0.5Co_xFe_1‐xO_3‐δ (x = 0.2 and 0.8) perovskites in argon atmosphere at 950 °C (Ar‐BSCF5582 and Ar‐BSCF5528) on the surface structure/defect chemistry and electrocatalytic performance is intensively investigated. Upon heat‐treatment in argon atmosphere, the amorphous thickness layer increases from ≈20 to 180–200 nm in BSCF5582, while there is little change in BSCF5528 with ≈20 nm. The electrocatalytic performance of BSCF5582 catalyst both in ORR and OER deteriorates seriously, while Ar‐BSCF5528 demonstrates a significant increase of electro­chemical performance in ORR. This study demonstrates that the electrochemical performances of a perovskite catalyst can be significantly determined by the simultaneous modification of both surface structure and internal defect chemistry, which are explained with transmission electron microscopy and atomic‐selective X‐ray absorption fine structure analyses, respectively.     

Classroom Enters the Courtroom: Stereochemistry of SN1 and SN2 Reactions in Enantiomer Patent Litigations of the Antidepressant Escitalopram

The role of elementary stereochemistry is illustrated in the patent litigations of the blockbuster antidepressant drug escitalopram oxalate. An undergraduate student of organic chemistry would recognize the stereochemical courses of the intramolecular S_N2 and S_N1 reactions of the single‐enantiomer (S)‐diol intermediate in the synthesis of the blockbuster antidepressant drug escitalopram oxalate: retention of configuration of the chiral carbon atom under basic conditions and racemization under acidic conditions, respectively. He/she, in searching for a stereoselective ring‐closure reaction of the enantiomeric diol, will think of an S_N2 reaction in a basic medium. From these points of view, the process claim in the enantiomer patents of escitalopram is obvious/lacks an inventive step. An organic chemistry examination problem based on this scenario is offered. Chirality 28:39–43, 2016. © 2015 Wiley Periodicals, Inc.     

Catalytic effect of water,water dimer,HCOOH and H2SO4 on the isomerisation of HON(O)NNO2 to ON(OH)NNO2: a mechanism study

ABSTRACT

In this article, we report a theoretical investigation on the role of several catalysts in the isomerisation mechanisms of HON(O)NNO₂ to ON(OH)NNO₂ by theoretical method of CBS-QB3. The isomerisation reactions with catalyst X (X?=?H₂O, (H₂O)₂, HCOOH and H₂SO₄) are multi-hydrogen atom transfer reactions. Compared to the isomerisation mechanisms and rate constant of HON(O)NNO₂ to ON(OH)NNO₂ without catalysts, incorporation of the catalyst X shows different positive catalytic effects on affecting the reaction processes, with the H₂SO₄-assisted reaction being the most favourable. Such different catalytic effects are mainly related to the size of the ring structure in X-assisted transition states and the different values of pK_a and proton affinities for HCOOH and H₂SO₄. Besides, compared with the barrier height of the isomerisation process from HON(O)NNO₂ to ON(OH)NNO₂ with HN(NO₂)₂ and HON(O)NNO₂, the barrier of H₂SO₄-assisted reaction is lower by 9.3 and 4.5?kcal?·mol^?1, meanwhile, the rate constant of H₂SO₄ catalyzed is larger than water and water dimer–assisted by 3–5 and 2–3 orders of magnitude, respectively. So, H₂SO₄-assisted reaction is the most favourable.