Circularly polarized luminescence of Sm (III) and Eu (III) complexes with chiral ligand (R/S)‐BINAPO

Luminescent lanthanide (III) ions have been exploited for circularly polarized luminescence (CPL) for decades. However, very few of these studies have involved chiral samarium (III) complexes. Complexes are prepared by mixing axial chiral ligands (R/S))‐2,2’‐bis(diphenylphosphoryl)‐1,1′‐binaphthyl (BINAPO) with europium and samarium Tris (trifluoromethane sulfonate) (Eu (OTf)₃ and Sm (OTf)₃). Luminescence‐based titration shows that the complex formed is Ln((R/S)‐BINAPO)₂(OTf)₃, where Ln = Eu or Sm. The CPL spectra are reported for Eu((R/S)‐BINAPO)₂(OTf)₃ and Sm((R/S)‐BINAPO)₂(OTf)₃. The sign of the dissymmetry factors, g_em, was dependent upon the chirality of the BINAPO ligand, and the magnitudes were relatively large. Of all of the complexes in this study, Sm((S)‐BINAPO)₂(OTf)₃ has the largest g_em = 0.272, which is one of the largest recorded for a chiral Sm³⁺ complex. A theoretical three‐dimensional structural model of the complex that is consistent with the experimental observations is developed and refined. This report also shows that (R/S)‐BINAPO are the only reported ligands where g_em (Sm³⁺) > g_em (Eu³⁺).     

Synthesis and Chiral Recognition of Nickel(II) Macrocyclic Complex with (R)‐Naphthylethyleneamine Pendant Groups and its Self‐Assembled Framework

A novel nickel(II) hexaaza macrocyclic complex, [Ni(L^R,R)](ClO₄)₂ ( 1 ), containing chiral pendant groups was synthesized by an efficient one‐pot template condensation and characterized (L^R,R═1,8‐di((R)‐α‐methylnaphthyl)‐1,3,6,8,10,13‐hexaazacyclotetradecane). The crystal structure of compound 1 was determined by single‐crystal X‐ray analysis. The complex was found to have a square‐planar coordination environment for the nickel(II) ion. Open framework [Ni(L^R,R)]₃[C₆H₃(COO)₃]₂ ( 2 ) was constructed from the self‐assembly of compound 1 with deprotonated 1,3,5‐benzenetricarboxylic acid, BTC^3?. Chiral discrimination of rac‐1,1′‐bi‐2‐naphthol and rac‐2,2,2‐trifluoro‐1‐(9‐anthryl)ethanol was performed to determine the chiral recognition ability of the chiral complex ( 1 ) and its self‐assembled framework ( 2 ). Binaphthol showed a good chiral discrimination on the framework ( 2 ). The optimum experimental conditions for the chiral discrimination were examined by changing the weight ratio between the macrocyclic complex 1 or self‐assembled framework 2 and racemates. The detailed synthetic procedures, spectroscopic data including single‐crystal X‐ray analysis, and the results of the chiral recognition for the compounds are described. Chirality, 25:54‐58, 2013 © 2012 Wiley Periodicals, Inc.     

Supramolecular dynamics of thalidomide and its derivatives in water‐sediment system

The contamination of drug residues, including chiral ones, is not acceptable in earth's ecosystem. The dynamicity of enantiomers of thalidomide and its derivatives (3‐methyl thalidomide, 3‐ethyl thalidomide, and 3‐butyl thalidomide) was ascertained at supramolecular level in water‐sediment system using solid phase extraction (SPE) and stereoselective HPLC. Enantiomeric separation of these drugs was carried out on Ceramosphere RU‐2 (25 cm × 0.46 cm, particle size 50 μm) chiral column using pure ethanol (1.0 ml/min) as eluent at 230 nm detection. Retention times, capacity, separation, and resolution factors of the enantiomers of these drugs were in the range of 20.0–36.0, 2.08–3.93, 1.35–1.57, and 1.0–2.0 min, respectively. Percentage recoveries of the enantiomers in SPE were in the range of 90.0 to 95.0 in water‐sediment system. Langmuir and Freundlich model were best fitted for dynamic equilibrium concentrations at different experimental parameters. Thalidomide and its derivatives follow first‐order kinetics at dynamic equilibrium. The rate constants of chiral interconversions were 0.390 and 0.385 days^?1 for S‐ and R‐enantiomers, respectively. The uptake of thalidomide by sediment is quite good and of endothermic nature indicating good self‐purification capacity of the nature for such toxic species. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

DABCO-based chiral ionic liquids as recoverable and reusable organocatalyst for asymmetric Diels–Alder reaction

New DABCO-based chiral ionic liquids were synthesized and evaluated in asymmetric Diels–Alder reaction of cyclopentadiene with α,β-unsaturated aldehydes or 4-phenyl-3-buten-2-one. Chiral ionic liquid of modified MacMillan catalyst having a DABCO cation and hexafluorophosphate anion acts as organocatalyst (5 mol%) for the Diels–Alder reaction of crotonaldehyde and cyclopentadiene producing 98% of the product and 87% ee (endo) in CH₃CN/H₂O (95/5) at 25°C in 2 h. The scope and limitations of the catalysis were also studied by using cyclopentadiene and α,β-unsaturated aldehydes, and the Diels–Alder products were obtained in 18%–92% yields with 68%–93% ee. The catalyst was recycled and reused up to 6 cycles with a slight drop in ee and conversion of the product.     

Experimental and Model Studies on Continuous Separation of 2‐Phenylpropionic Acid Enantiomers by Enantioselective Liquid–Liquid Extraction in Centrifugal Contactor Separators

Multistage enantioselective liquid–liquid extraction (ELLE) of 2‐phenylpropionic acid (2‐PPA) enantiomers using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as extractant was studied experimentally in a counter‐current cascade of centrifugal contactor separators (CCSs). Performance of the process was evaluated by purity (enantiomeric excess, ee) and yield (Y). A multistage equilibrium model was established on the basis of single‐stage model for chiral extraction of 2‐PPA enantiomers and the law of mass conservation. A series of experiments on the extract phase/washing phase ratio (W/O ratio), extractant concentration, the pH value of aqueous phase, and the number of stages was conducted to verify the multistage equilibrium model. It was found that model predictions were in good agreement with the experimental results. The model was applied to predict and optimize the symmetrical separation of 2‐PPA enantiomers. The optimal conditions for symmetric separation involves a W/O ratio of 0.6, pH of 2.5, and HP‐β‐CD concentration of 0.1 mol L^?1 at a temperature of 278 K, where ee_eq (equal enantiomeric excess) can reach up to 37% and Y_eq (equal yield) to 69%. By simulation and optimization, the minimum number of stages was evaluated at 98 and 106 for ee_eq > 95% and ee_eq > 97%. Chirality 28:235–244, 2016. © 2016 Wiley Periodicals, Inc. Research highlights are as follows:

相似文献   

High‐performance liquid chromatographic enantioseparation of N‐aryl‐thioureidoalkylphosphonates and thiourylenedi(alkylphosphonates) on polysaccharide‐based chiral stationary phases

The first successful enantioseparation of representative O,O‐diphenyl‐N‐arylthioureidoalkylphosphonates, (±)‐Ptc‐Val^P(OPh)₂ & (±)‐Ptc‐Leu^P(OPh)₂ and thiourylenedi(isobutyl phosphonate), Tcm[Val^P(OPh)₂]₂ on analytical and semipreparative scale was achieved by high‐performance liquid chromatography using polysaccharide‐based chiral stationary phases (CPs). Atc‐AA^P(OPh)₂ was obtained using modified tricomponent condensations of the corresponding aldehydes, N‐arylthiourea and triphenyl phosphite whereas Tcm[Val^P(OPh)₂]₂ by the condensations of aldehydes, thiourea, and triphenyl phosphite. The prepared, racemic (±)‐Atc‐AA^P(OPh)₂ [(±)‐Ptc‐Val^P(OPh)₂, (±)‐Ptc‐Leu^P(OPh)₂, (±)‐Ptc‐Pgly^P(OPh)₂ and (±)‐Ntc‐Pgly^P(OPh)₂] and racemic (±)‐Tcm[AA^P(OPh)₂]₂ [(±)‐Tcm[Nva^P(OPh)₂]₂ & (±)‐Tcm[Val^P(OPh)₂]₂] were adequately characterized and used for chromatographic separations on high‐performance liquid chromatography–chiral stationary phases. The best results were obtained for (±)‐Ptc‐Val^P(OPh)₂, (±)‐Ptc‐Leu^P(OPh)₂ and (±)‐Tcm[Val^P(OPh)₂]₂.     

Chiral porphyrin imine manganese complex as catalyst for asymmetric epoxidation of styrene derivatives

New chiral porphyrin imine was synthesized from (S)‐3‐benzyl‐2‐methyl‐4‐phenylbutanal according to dipyrromethane method using trifluoroacetic acid, BF₃ etherate, and p‐chloranil. Manganese complex of this chiral porphyrin imine ligand was used as catalyst in the asymmetric epoxidation of styrene derivatives possessing different substituents. Styrene derivatives possessing electron withdrawing groups gave the corresponding chiral epoxides in high yield up to 98% and ee up to 99%. The mechanism for the catalytic asymmetric epoxidation was also discussed based on transfer of oxygen.     

Enantioselective Photolysis and Quantitative Chiral Analysis of Tryptophan Complexed With Alkali‐Metalized L‐Serine in the Gas Phase

The enantioselective photolysis of a cold gas‐phase noncovalent complex of tryptophan with alkali‐metalized L‐serine, M⁺(L‐Ser)(Trp) (M = Na and Li), was examined using a tandem mass spectrometer containing a variable‐temperature ion trap. CO₂ loss from Trp in the clusters was enantiomerically selective in ultraviolet excitation with linearly polarized light. M⁺(L‐Ser) promoted the enantioselective photolysis of Trp as a chiral auxiliary. The enantioselective photolysis of the D‐enantiomer was applied to a quantitative chiral analysis, in which the optical purity of tryptophan could be determined by measuring the relative abundance ratio R of the enantioselective CO₂ loss to the chiral‐independent evaporation of L‐Ser in a single photodissociation mass spectrum of M⁺(L‐Ser)(Trp). Chirality 27:349–352, 2015. © 2015 Wiley Periodicals, Inc.     

A 3D Homochiral MOF [Cd2(d‐cam)3]•2Hdma•4dma for HPLC Chromatographic Enantioseparation

Up to now, some chiral metal‐organic frameworks (MOFs) have been reported for enantioseparation in liquid chromatography. Here we report a homochiral MOF, [Cd2(d‐cam)3]·2Hdma·4dma, used as a new chiral stationary phase for high‐performance liquid chromatographic enantioseparation. Nine racemates of alcohol, naphthol, ketone, and base compounds were used as analytes for evaluating the separation properties of the chiral MOF packed column. Moreover, some effects such as mobile phase composition, column temperature, and analytes mass for separations on this chiral column also were investigated. The relative standard deviations for the resolution values of run‐to‐run and column‐to‐column were less than 2.1% and 3.2%, respectively. The experimental results indicate that the homochiral MOF offered good recognition ability, which promotes the application of chiral MOFs use as stationary phase for enantioseparation. Chirality 28:340–346, 2016. © 2016 Wiley Periodicals, Inc.     

Enantiomeric Separation and Simulation Studies of Pheniramine,Oxybutynin, Cetirizine,and Brinzolamide Chiral Drugs on Amylose‐Based Columns

Solid phase extraction ( SPE)‐chiral separation of the important drugs pheniramine, oxybutynin, cetirizine, and brinzolamide was achieved on the C₁₈ cartridge and AmyCoat (150 x 46 mm) and Chiralpak AD (25 cm x 0.46 cm id) chiral columns in human plasma. Pheniramine, oxybutynin, cetirizine, and brinzolamide were resolved using n‐hexane‐2‐PrOH‐DEA (85:15:0.1, v/v), n‐hexane‐2‐PrOH‐DEA (80:20:0.1, v/v), n‐hexane‐2‐PrOH‐DEA (70:30:0.2, v/v), and n‐hexane‐2‐propanol (90:10, v/v) as mobile phases. The separation was carried out at 25 ± 1 ºC temperature with detection at 225 nm for cetirizine and oxybutynin and 220 nm for pheniramine and brinzolamide. The flow rates of the mobile phases were 0.5 mLmin^‐1. The retention factors of pheniramine, oxybutynin, cetirizine and brinzolamide were 3.25 and 4.34, 4.76 and 5.64, 6.10 and 6.60, and 1.64 and 2.01, respectively. The separation factors of these drugs were 1.33, 1.18, 1.09 and 1.20 while their resolutions factors were 1.09, 1.45, 1.63 and 1.25, and 1.15, respectively. The absolute configurations of the eluted enantiomers of the reported drugs were determined by simulation studies. It was observed that the order of enantiomers elution of the reported drugs was S‐pheniramine > R‐pheniramine; R‐oxybutynin > S‐oxybutynin; S‐cetirizine > R‐cetirizine; and S‐brinzolamide > R‐brinzolamide. The mechanism of separation was also determined at the supramolecular level by considering interactions and modeling results. The reported SPE‐chiral high‐performance liquid chromatography ( HPLC) methods are suitable for the enantiomeric analyses of these drugs in any biological sample. In addition, simulation studies may be used to determine the absolute configuration of the first and second eluted enantiomers. Chirality 26:136–143, 2014. © 2014 Wiley Periodicals, Inc.     

Convenient enzymatic resolution of (R,S)‐2‐methylbutyric acid catalyzed by immobilized lipases

The application of several immobilized lipases has been explored in the enantioselective esterification of (R,S)‐2‐methylbutyric acid, an insect pheromone precursor. With the use of Candida antarctica B, using hexane as solvent, (R)‐pentyl 2‐methylbutyrate was prepared in 2 h with c 40%, ee_p 90%, and E = 35, while Thermomyces lanuginosus leads to c 18%, ee_p 91%, and E = 26. The (S)‐enantiomer was obtained by the use of Candida rugosa or Rhizopus oryzae (2‐h reaction, c 34% and 35%, ee_p 75 and 49%, and E = 10 and 4, respectively). Under optimal conditions, the effect of the solvent, the molar ratio, and the nucleophile were evaluated.     

BSA–AuNPs@Tb–AMP metal–organic frameworks for ratiometric fluorescence detection of DPA and Hg2+

An easy and effective strategy for synthesizing a ratiometric fluorescent nanosensor has been demonstrated in this work. Novel fluorescent BSA–AuNPs@Tb–AMP (BSA, bovine serum albumin; AMP, adenosine 5′‐monophosphate; AuNPs, Au nanoparticles) metal–organic framework (MOF) nanostructures were synthesized by encapsulating BSA–AuNPs into Tb–AMP MOFs for the detection of 2,6‐pyridinedicarboxylic acid (DPA) and Hg²⁺. DPA could strongly co‐ordinate with Tb³⁺ to replace water molecules from the Tb³⁺ center and accordingly enhanced the fluorescence of Tb–AMP MOFs. The fluorescence of BSA–AuNPs at 405 nm remained constant. While the fluorescence of BSA–AuNPs at 635 nm was quenched after Hg²⁺ was added, the fluorescence of Tb–AMP MOFs remained constant. Accordingly, a ratiometric fluorescence nanosensor was constructed for detection of DPA and Hg²⁺. The ratiometric nanosensor exhibited good selectivity to DPA over other substances. The F₅₄₅/F₄₀₅ linearly increased with increase of DPA concentration in the range of 50 nM to 10 μM with a detection limit as low as 17.4 nM. F₆₃₅/F₄₀₅ increased linearly with increase of Hg²⁺ concentration ranging from 50 nM to 1 μM with a detection limit as low as 20.9 nM. Additionally, the nanosensor could be successfully applied for the determination of DPA and Hg²⁺ in running water.     

Enantioselective Liquid–Liquid Extraction of Zopiclone With Mandelic Acid Ester Derivatives

Enantioselective liquid–liquid extraction of zopiclone was conducted by employing a series of (R)‐mandelic acid esters as chiral extractants. The effects of concentration of extractant, concentration of zopiclone, type of organic solvent, pH value, and temperature on the extraction efficiency were investigated. (R)‐o‐chloromandelic acid propyl ester was demonstrated to be an efficient chiral extractant for zopiclone resolution with a maximum enantioselectivity of 1.6. Chirality 25:952–956, 2013. © 2013 Wiley Periodicals, Inc.     

Separation of Tryptophan Enantiomers by Ligand‐Exchange Chromatography With Novel Chiral Ionic Liquids Ligand

Chiral ionic liquids (CILs) with amino acids as cations have been applied as novel chiral ligands coordinated with Cu²⁺ to separate tryptophan enantiomers in ligand exchange chromatography. Four kinds of amino acid ionic liquids, including [L‐Pro][CF₃COO], [L‐Pro][NO₃], [L‐Pro]₂[SO₄], and [L‐Phe][CF₃COO] were successfully synthesized and used for separation of tryptophan enantiomers. To optimize the separation conditions, [L‐Pro][CF₃COO] was selected as the model ligand. Some factors influencing the efficiency of chiral separation, such as copper ion concentration, CILs concentration, methanol ratio (methanol/H₂O, v/v), and pH, were investigated. The obtained optimal separation conditions were as follows: 8.0 mmol/L Cu(OAc)₂, 4.0 mmol/L [L‐Pro][CF₃COO] ,and 20% (v/v) methanol at pH 3.6. Under the optimum conditions, acceptable enantioseparation of tryptophan enantiomers could be observed with a resolution of 1.89. The results demonstrate the good applicability of CILs with amino acids as cations for chiral separation. Furthermore, a comparative study was also conducted for exploring the mechanism of the CILs as new ligands in ligand exchange chromatography. Chirality 26:160–165, 2014. © 2014 Wiley Periodicals, Inc.     

Dehalogenation Activity of Selected Fungi Toward δ‐Iodo‐γ‐Lactone Derived from trans,trans‐Farnesol

Time‐course of biotransformation of racemic trans‐4‐((E)‐4′,8′‐dimethylnona‐3′,7′‐dien‐1‐yl)‐5‐iodomethyl‐4‐methyldihydrofuran‐2‐one ( 1 ) in fungal and yeast cultures was investigated. In these conditions, the substrate 1 was enantioselectively dehalogenated yielding 4‐((E)‐4′,8′‐dimethylnona‐3′,7′‐dien‐1‐yl)‐4‐methyl‐5‐methylenedihydrofuran‐2‐one ( 2 ) and its structure was established based on the spectroscopic data. The most effective biocatalyst used was Didymosphaeria igniaria, which catalyzed the process with highest rate and enantioselectivity (ee of product = 76%). The antiproliferative activity of δ‐iodo‐γ‐lactone 1 , product of its biotransformation 2 , and starting substrate (farnesol) were evaluated toward two cancer cell lines: A549 (human lung adenocarcinoma) and HL‐60 (human promyelocytic leukemia).     

Optimization of ASE and SPE conditions for the HPLC‐FLD detection of piperazine in chicken tissues and pork

Accelerated solvent extraction (ASE) and solid‐phase extraction (SPE) conditions were optimized by a high‐performance liquid chromatography‐fluorescence detector (HPLC‐FLD) method for the detection of piperazine in chicken tissues and pork. Piperazine residues were determined by precolumn derivatization with trimethylamine and dansyl chloride. Samples were extracted with 2% formic acid in acetonitrile using an ASE apparatus and purified using a Strata‐X‐C SPE column. The monosubstituted product of the reaction of piperazine with dansyl chloride was 1‐dansyl piperazine (1‐DNS‐piperazine). Chromatographic separations were performed on an Athena C₁₈ column (250 × 4.6 mm, id: 5 μm) with gradient elution using ultrapure water and acetonitrile (5:95, V/V) as the mobile phase. The calibration curves showed good linearity over a concentration range of LOQ‐200.0 μg/kg with a coefficient of determination (R²) ≥ .9992. The recoveries and relative standard deviations (RSD values) ranged from 78.49% to 97.56% and 1.19% to 5.32%, respectively, across the limit of quantification (LOQ) and 0.5, 1, and 2.0 times the maximum residue limit (MRL; μg/kg). The limits of detection (LODs) and LOQs were 0.96 to 1.85 μg/kg and 3.20 to 5.50 μg/kg, respectively. The method was successfully applied for the validation of animal products in the laboratory.     

Enantioseparation of flurbiprofen enantiomers using chiral ionic liquids by liquid‐liquid extraction

Flurbiprofen is a kind of nonsteroidal anti‐inflammatory drug, which has been widely used in clinic for treatment of rheumatoid arthritis and osteoarthritis. It has been reported that S‐flurbiprofen shows good performance on clinic anti‐inflammatory treatment, while R‐enantiomer almost has no pharmacological activities. It has important practical values to obtain optically pure S‐flurbiprofen. In this work, chiral ionic liquids, which have good structural designability and chiral recognize ability, were selected as the extraction selector by the assistance of quantum chemistry calculations. The distribution behaviors of flurbiprofen enantiomers were investigated in the extraction system, which was composed of organic solvent and aqueous phase containing chiral ionic liquid. The results show that maximum enantioselectivity up to 1.20 was attained at pH 2.0, 25°C using 1,2‐dichloroethane as organic solvent, 1‐butyl‐3‐methylimidazole L‐tryptophan ([Bmim][L‐trp]) as chiral selector. The racemic flurbiprofen initial concentration was 0.2 mmol L^?1, and [Bmim][L‐trp] concentration was 0.02 mol L^?1. Furthermore, the recycle of chiral ionic liquids has been achieved by reverse extraction process of the aqueous phase with chiral selector, which is significant for industrial application of chiral ionic liquids and scale‐up of the extraction process.     

Novel fluorine‐containing chiral hydrazide‐hydrazones: Design,synthesis, structural elucidation,antioxidant and anticholinesterase activity,and in silico studies

In this study, a series of fluorine‐containing chiral hydrazide‐hydrazone derivatives [III‐XII] from ?‐cysteine ethyl ester hydrochloride was synthesized as new antioxidant and anticholinesterase agents. The antioxidant activity of these derivatives was evaluated by ABTS^+· and DPPH^· scavenging and CUPRAC assays and the anticholinesterase activity by the Ellman method spectrophotometrically. The results of the antioxidant assay showed that compounds V , IX , and X exhibited higher activity than BHT and α‐tocopherol used as positive standards. Among the synthesized derivatives, compound IX (IC₅₀: 2.3 ± 1.6 μM) exhibited higher acetylcholinesterase inhibitory activity than galantamine (IC₅₀: 4.5 ± 0.8 μM). Compounds XI (IC₅₀: 9.6 ± 1.0 μM), IX (IC₅₀: 12.5 ± 1.6 μM), III (IC₅₀: 16.0 ± 1.6 μM), X (IC₅₀: 17.2 ± 1.8 μM), VI (IC₅₀: 20.2 ± 0.8 μM), XII (IC₅₀: 21.5 ± 1.0 μM), and VII (IC₅₀: 24.6 ± 0.6 μM) displayed better butyrylcholinesterase inhibitory activity than galantamine (IC₅₀: 46.03 ± 0.14 μM). ADME‐Tox analysis was used to probe the drug‐like properties of the compounds. Molecular docking studies were also applied to understand the interactions between compounds and targets. The docking calculations were supported by the experimental data. In particular, compound IX , having better activity than galantamine against acetylcholinesterase and butyrylcholinesterase enzymes, was visualized using molecular docking.     

Chromatographic profiles of tryptophan and kynurenine enantiomers derivatized with (S)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole using LC–MS/MS on a triazole‐bonded column

d ‐ and l ‐Tryptophan (Trp) and d ‐ and l ‐kynurenine (KYN) were derivatized with a chiral reagent, (S )‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS), and were separated enantiomerically by high‐performance liquid chromatography (HPLC) equipped with a triazole‐bonded column (Cosmosil HILIC) using tandem mass spectrometric (MS/MS) detection. Effects of column temperature, salt (HCO₂NH₄) concentration, and pH of the mobile phase in the enantiomeric separation, followed by MS detection of (S )‐DBD‐PyNCS‐d ,l ‐Trp and ‐d ,l ‐KYN, were investigated. The mobile phase consisting of CH₃CN/10 mM ammonium formate in H₂O (pH 5.0) (90/10) with a column temperature of 50–60 °C gave satisfactory resolution (R s) and mass‐spectrometric detection. The enantiomeric separation of d ,l ‐Trp and d ,l ‐KYN produced R s values of 2.22 and 2.13, and separation factors (α) of 1.08 and 1.08, for the Trp and KYN enantiomers, respectively. The proposed LC–MS/MS method provided excellent detection sensitivity of both enantiomers of Trp and KYN (5.1–19 nM).     

Evaluation of the chiral recognition properties and the column performances of three chiral stationary phases based on cellulose for the enantioseparation of six dihydropyridines by high‐performance liquid chromatography

Separations of six dihydropyridine enantiomers on three commercially available cellulose‐based chiral stationary phases (Chiralcel OD‐RH, Chiralpak IB, and Chiralpak IC) were evaluated with high‐performance liquid chromatography (HPLC). The best enantioseparation of the six chiral drugs was obtained with a Chiralpak IC (250 × 4.6 mm i.d., 5 μm) column. Then the influence of the mobile phase including an alcohol‐modifying agent and alkaline additive on the enantioseparation were investigated and optimized. The optimal mobile phase conditions and maximum resolution for every analyte were as follows respectively: n‐hexane/isopropanol (85:15, v /v) for nimodipine (R  = 5.80) and cinildilpine (R  = 5.65); n‐hexane/isopropanol (92:8, v /v) for nicardipine (R  = 1.76) and nisoldipine (R  = 1.92); and n‐hexane/isopropanol/ethanol (97:2:1, v /v/v) for felodipine (R  = 1.84) and lercanidipine (R  = 1.47). Relative separation mechanisms are discussed based on the separation results, and indicate that the achiral parts in the analytes' structure showed an important influence on the separation of the chiral column.