Exploiting 3D structural templates for detection of metal-binding sites in protein structures

High throughput structural genomics efforts have been making the structures of proteins available even before their function has been fully characterized. Therefore, methods that exploit the structural knowledge to provide evidence about the functions of proteins would be useful. Such methods would be needed to complement the sequence-based function annotation approaches. The current study describes generation of 3D-structural motifs for metal-binding sites from the known metalloproteins. It then scans all the available protein structures in the PDB database for putative metal-binding sites. Our analysis predicted more than 1000 novel metal-binding sites in proteins using three-residue templates, and more than 150 novel metal-binding sites using four-residue templates. Prediction of metal-binding site in a yeast protein YDR533c led to the hypothesis that it might function as metal-dependent amidopeptidase. The structural motifs identified by our method present novel metal-binding sites that reveal newer mechanisms for a few well-known proteins.     

Identification and characterization of a novel high affinity metal-binding site in the hammerhead ribozyme.

A novel metal-binding site has been identified in the hammerhead ribozyme by 31P NMR. The metal-binding site is associated with the A13 phosphate in the catalytic core of the hammerhead ribozyme and is distinct from any previously identified metal-binding sites. 31P NMR spectroscopy was used to measure the metal-binding affinity for this site and leads to an apparent dissociation constant of 250-570 microM at 25 degrees C for binding of a single Mg2+ ion. The NMR data also show evidence of a structural change at this site upon metal binding and these results are compared with previous data on metal-induced structural changes in the core of the hammerhead ribozyme. These NMR data were combined with the X-ray structure of the hammerhead ribozyme (Pley HW, Flaherty KM, McKay DB. 1994. Nature 372:68-74) to model RNA ligands involved in binding the metal at this A13 site. In this model, the A13 metal-binding site is structurally similar to the previously identified A(g) metal-binding site and illustrates the symmetrical nature of the tandem G x A base pairs in domain 2 of the hammerhead ribozyme. These results demonstrate that 31P NMR represents an important method for both identification and characterization of metal-binding sites in nucleic acids.     

Predicting metal-binding site residues in low-resolution structural models

The accurate prediction of the biochemical function of a protein is becoming increasingly important, given the unprecedented growth of both structural and sequence databanks. Consequently, computational methods are required to analyse such data in an automated manner to ensure genomes are annotated accurately. Protein structure prediction methods, for example, are capable of generating approximate structural models on a genome-wide scale. However, the detection of functionally important regions in such crude models, as well as structural genomics targets, remains an extremely important problem. The method described in the current study, MetSite, represents a fully automatic approach for the detection of metal-binding residue clusters applicable to protein models of moderate quality. The method involves using sequence profile information in combination with approximate structural data. Several neural network classifiers are shown to be able to distinguish metal sites from non-sites with a mean accuracy of 94.5%. The method was demonstrated to identify metal-binding sites correctly in LiveBench targets where no obvious metal-binding sequence motifs were detectable using InterPro. Accurate detection of metal sites was shown to be feasible for low-resolution predicted structures generated using mGenTHREADER where no side-chain information was available. High-scoring predictions were observed for a recently solved hypothetical protein from Haemophilus influenzae, indicating a putative metal-binding site.     

Crystal structure of the Atx1 metallochaperone protein at 1.02 A resolution.

BACKGROUND: Metallochaperone proteins function in the trafficking and delivery of essential, yet potentially toxic, metal ions to distinct locations and particular proteins in eukaryotic cells. The Atx1 protein shuttles copper to the transport ATPase Ccc2 in yeast cells. Molecular mechanisms for copper delivery by Atx1 and similar human chaperones have been proposed, but detailed structural characterization is necessary to elucidate how Atx1 binds metal ions and how it might interact with Ccc2 to facilitate metal ion transfer. RESULTS: The 1.02 A resolution X-ray structure of the Hg(II) form of Atx1 (HgAtx1) reveals the overall secondary structure, the location of the metal-binding site, the detailed coordination geometry for Hg(II), and specific amino acid residues that may be important in interactions with Ccc2. Metal ion transfer experiments establish that HgAtx1 is a functional model for the Cu(I) form of Atx1 (CuAtx1). The metal-binding loop is flexible, changing conformation to form a disulfide bond in the oxidized apo form, the structure of which has been solved to 1.20 A resolution. CONCLUSIONS: The Atx1 structure represents the first structure of a metallochaperone protein, and is one of the largest unknown structures solved by direct methods. The structural features of the metal-binding site support the proposed Atx1 mechanism in which facile metal ion transfer occurs between metal-binding sites of the diffusible copper-donor and membrane-tethered copper-acceptor proteins. The Atx1 structural motif represents a prototypical metal ion trafficking unit that is likely to be employed in a variety of organisms for different metal ions.     

Structural characterization of the bifunctional glucanase-xylanase CelM2 reveals the metal effect and substrate-binding moiety

The bifunctional glycoside hydrolase enzyme, CelM2, is able to hydrolyze glucan and xylan effectively. The crystal structure of this protein has been determined, providing useful sequential and structural information [K.H. Nam, S.J. Kim, K.Y. Hwang, Crystal structure of CelM2, a bifunctional glucanase-xylanase protein from a metagenome library, Biochem. Biophys. Res. Commun. 383 (2009) 183-186]. In addition, this protein is a good model for understanding bifunctional enzymes, and it will provide information relevant for genetic engineering that will be useful in the design of bifunctional proteins. However, previous structural characterization was not sufficient to develop an understanding of the metal ion and substrate-binding moiety.Herein, we determined the metal-binding site of CelM2 using zinc ions. Our results revealed that the zinc ions participate in the crystallographic packing and enzyme folding of the external region of the TIM-like barrel domain. Based on our structure, zinc ions induce the passive form of the CAP region at the catalytic cleft of the CelM2 protein. Moreover, glucose was bound to the CelM2 structure at the catalytic site. This structure provides the binding moiety that binds to the hydroxyl group of substrates such as cellulose. In addition, a structural comparison of celM2 with Cel44 provides a good model of the binding mode of CelM2. Thus, our study represents a novel structural characterization of the metal-binding site and the structure of the complex formed between CelM2 and its substrate.     

Structural analysis, identification, and design of calcium-binding sites in proteins

Assigning proteins with functions based on the 3-D structure requires high-speed techniques to make a systematic survey of protein structures. Calcium regulates many biological systems by binding numerous proteins in different biological environments. Despite the great diversity in the composition of ligand residues and bond angles and lengths of calcium-binding sites, our structural analysis of 11 calcium-binding sites in different classes of proteins has shown that common local structural parameters can be used to identify and design calcium-binding proteins. Natural calcium-binding sites in both EF-hand proteins and non-EF-hand proteins can be described with the smallest deviation from the geometry of an ideal pentagonal bipyramid. Further, two different magnesium-binding sites in parvalbumin and calbindin(D9K) can also be identified using an octahedral geometry. Using the established method, we have designed de novo calcium-binding sites into the scaffold of non-calcium-binding proteins CD2 and Rop. Our results suggest that it is possible to identify calcium- and magnesium-binding sites in proteins and design de novo metal-binding sites.     

The PMS2 subunit of human MutLalpha contains a metal ion binding domain of the iron-dependent repressor protein family

DNA mismatch repair (MMR) is responsible for correcting replication errors. MutLα, one of the main players in MMR, has been recently shown to harbor an endonuclease/metal-binding activity, which is important for its function in vivo. This endonuclease activity has been confined to the C-terminal domain of the hPMS2 subunit of the MutLα heterodimer. In this work, we identify a striking sequence-structure similarity of hPMS2 to the metal-binding/dimerization domain of the iron-dependent repressor protein family and present a structural model of the metal-binding domain of MutLα. According to our model, this domain of MutLα comprises at least three highly conserved sequence motifs, which are also present in most MutL homologs from bacteria that do not rely on the endonuclease activity of MutH for strand discrimination. Furthermore, based on our structural model, we predict that MutLα is a zinc ion binding protein and confirm this prediction by way of biochemical analysis of zinc ion binding using the full-length and C-terminal domain of MutLα. Finally, we demonstrate that the conserved residues of the metal ion binding domain are crucial for MMR activity of MutLα in vitro.     

Metal-binding and nuclease activity of an antimicrobial peptide analogue of the salivary histatin 5

The salivary antimicrobial peptide histatin 5 is characterized by its cationic nature, structural flexibility, and the presence of two metal-binding sites (the ATCUN motif and a Zn-binding motif). These properties make this peptide a good model for the design of new drugs of low molecular weight. In this work, we have synthesized and studied a new peptide, an analogue of the histatin 5 named ATCUN-C16, which contains both metal-binding centers. The results show that our 20-residue-derived peptide preserves anticandidal activity and exhibits a higher propensity to assume a stable conformation in a hydrophobic environment than do histatin 5 and the C16 peptide that contains the 16 residues of the C-terminal part of histatin 5, although overall our peptide remains a flexible molecule. ACTUN-C16 was found to bind DNA in a gel retardation assay and to have a nuclease activity in the presence of copper and zinc ions and ascorbate. Its nuclease activity can be attributed to the synergistic action of oxidative and hydrolytic activities due to the Cu-ATCUN complex and to the zinc ion coordination, respectively. The results show a new property of this family of salivary peptides and suggest a novel use of this peptide as a small nuclease and biotechnological tool.     

Protein metal binding residue prediction based on neural networks

Over one-third of protein structures contain metal ions, which are the necessary elements in life systems. Traditionally, structural biologists were used to investigate properties of metalloproteins (proteins which bind with metal ions) by physical means and interpreting the function formation and reaction mechanism of enzyme by their structures and observations from experiments in vitro. Most of proteins have primary structures (amino acid sequence information) only; however, the 3-dimension structures are not always available. In this paper, a direct analysis method is proposed to predict the protein metal-binding amino acid residues from its sequence information only by neural networks with sliding window-based feature extraction and biological feature encoding techniques. In four major bulk elements (Calcium, Potassium, Magnesium, and Sodium), the metal-binding residues are identified by the proposed method with higher than 90% sensitivity and very good accuracy under 5-fold cross validation. With such promising results, it can be extended and used as a powerful methodology for metal-binding characterization from rapidly increasing protein sequences in the future.     

The calcium-binding site in the galactose chemoreceptor protein. Crystallographic and metal-binding studies

We have determined the relative affinities in solution for various metals which bind to the lone calcium-binding site of the D-galactose-binding protein which resembles the EF-hand loop. In order of affinity the metals are: Ca2+ approximately Tb3+ approximately Pb2+ greater than Cd2+ greater than Sr2+ greater than Mg2+ much greater than Ba2+. The binding affinity for calcium (Kd = 2 microM) and the slow off-rate determined for terbium (1 x 10(-3) s-1) and that the metal-binding site is unperturbed by sugar binding argue for a structural role. Furthermore, we have crystallographically refined the structure of the binding protein with the calcium substituted by cadmium, compared it with the calcium-bound structure, and found them to be identical. The results of these structural and solution studies support the hypothesis that for a given metal-binding loop, cation hydration energy, size, and charge are major factors contributing to binding affinity.     

A superfamily of metalloenzymes unifies phosphopentomutase and cofactor-independent phosphoglycerate mutase with alkaline phosphatases and sulfatases

Sequence analysis of the probable archaeal phosphoglycerate mutase resulted in the identification of a superfamily of metalloenzymes with similar metal-binding sites and predicted conserved structural fold. This superfamily unites alkaline phosphatase, N-acetylgalactosamine-4-sulfatase, and cerebroside sulfatase, enzymes with known three-dimensional structures, with phosphopentomutase, 2,3-bisphosphoglycerate-independent phosphoglycerate mutase, phosphoglycerol transferase, phosphonate monoesterase, streptomycin-6-phosphate phosphatase, alkaline phosphodiesterase/nucleotide pyrophosphatase PC-1, and several closely related sulfatases. In addition to the metal-binding motifs, all these enzymes contain a set of conserved amino acid residues that are likely to be required for the enzymatic activity. Mutational changes in the vicinity of these residues in several sulfatases cause mucopolysaccharidosis (Hunter, Maroteaux-Lamy, Morquio, and Sanfilippo syndromes) and metachromatic leucodystrophy.     

Evolution of binding sites for zinc and calcium ions playing structural roles

The geometry of metal coordination by proteins is well understood, but the evolution of metal binding sites has been less studied. Here we present a study on a small number of well-documented structural calcium and zinc binding sites, concerning how the geometry diverges between relatives, how often nonrelatives converge towards the same structure, and how often these metal binding sites are lost in the course of evolution. Both calcium and zinc binding site structure is observed to be conserved; structural differences between those atoms directly involved in metal binding in related proteins are typically less than 0.5 A root mean square deviation, even in distant relatives. Structural templates representing these conserved calcium and zinc binding sites were used to search the Protein Data Bank for cases where unrelated proteins have converged upon the same residue selection and geometry for metal binding. This allowed us to identify six "archetypal" metal binding site structures: two archetypal zinc binding sites, both of which had independently evolved on a large number of occasions, and four diverse archetypal calcium binding sites, where each had evolved independently on only a handful of occasions. We found that it was common for distant relatives of metal-binding proteins to lack metal-binding capacity. This occurred for 13 of the 18 metal binding sites we studied, even though in some of these cases the original metal had been classified as "essential for protein folding." For most of the calcium binding sites studied (seven out of eleven cases), the lack of metal binding in relatives was due to point mutation of the metal-binding residues, whilst for zinc binding sites, lack of metal binding in relatives always involved more extensive changes, with loss of secondary structural elements or loops around the binding site.     

Use of terbium as a probe of tRNA tertiary structure and folding

Lanthanide metals such as terbium have previously been shown to be useful for mapping metal-binding sites in RNA. Terbium binds to the same sites on RNA as magnesium, however, with a much higher affinity. Thus, low concentrations of terbium ions can easily displace magnesium and promote phosphodiester backbone scission. At higher concentrations, terbium cleaves RNA in a sequence-independent manner, with a preference for single-stranded, non-Watson-Crick base-paired regions. Here, we show that terbium is a sensitive probe of human tRNALys,3 tertiary structure and folding. When 1 microM tRNA is used, the optimal terbium ion concentration for detecting Mg2+-induced tertiary structural changes is 50-60 microM. Using these concentrations of RNA and terbium, a magnesium-dependent folding transition with a midpoint (KMg) of 2.6 mM is observed for unmodified human tRNALys,3. At lower Tb3+ concentrations, cleavage is restricted to nucleotides that constitute specific metal-binding pockets. This small chemical probe should also be useful for detecting protein induced structural changes in RNA.     

Treble clef finger--a functionally diverse zinc-binding structural motif

Detection of similarity is particularly difficult for small proteins and thus connections between many of them remain unnoticed. Structure and sequence analysis of several metal-binding proteins reveals unexpected similarities in structural domains classified as different protein folds in SCOP and suggests unification of seven folds that belong to two protein classes. The common motif, termed treble clef finger in this study, forms the protein structural core and is 25-45 residues long. The treble clef motif is assembled around the central zinc ion and consists of a zinc knuckle, loop, beta-hairpin and an alpha-helix. The knuckle and the first turn of the helix each incorporate two zinc ligands. Treble clef domains constitute the core of many structures such as ribosomal proteins L24E and S14, RING fingers, protein kinase cysteine-rich domains, nuclear receptor-like fingers, LIM domains, phosphatidylinositol-3-phosphate-binding domains and His-Me finger endonucleases. The treble clef finger is a uniquely versatile motif adaptable for various functions. This small domain with a 25 residue structural core can accommodate eight different metal-binding sites and can have many types of functions from binding of nucleic acids, proteins and small molecules, to catalysis of phosphodiester bond hydrolysis. Treble clef motifs are frequently incorporated in larger structures or occur in doublets. Present analysis suggests that the treble clef motif defines a distinct structural fold found in proteins with diverse functional properties and forms one of the major zinc finger groups.     

Structure of the manganese-bound manganese transport regulator of Bacillus subtilis

The Bacillus subtilis manganese transport regulator, MntR, binds Mn2+ as an effector and is a repressor of transporters that import manganese. A member of the diphtheria toxin repressor (DtxR) family of metalloregulatory proteins, MntR exhibits selectivity for Mn2+ over Fe2+. Replacement of a metal-binding residue, Asp8, with methionine (D8M) relaxes this specificity. We report here the X-ray crystal structures of wild-type MntR and the D8M mutant bound to manganese with 1.75 A and 1.61 A resolution, respectively. The 142-residue MntR homodimer has substantial structural similarity to the 226-residue DtxR but lacks the C-terminal SH3-like domain of DtxR. The metal-binding pockets of MntR and DtxR are substantially different. The cation-to-cation distance between the two manganese ions bound by MntR is 3.3 A, whereas that between the metal ions bound by DtxR is 9 A. D8M binds only a single Mn2+ per monomer, owing to alteration of the metal-binding site. The sole retained metal site adopts pseudo-hexacoordinate geometry rather than the pseudo-heptacoordinate geometry of the MntR metal sites.     

Prediction of transition metal-binding sites from apo protein structures

Metal ions are crucial for protein function. They participate in enzyme catalysis, play regulatory roles, and help maintain protein structure. Current tools for predicting metal-protein interactions are based on proteins crystallized with their metal ions present (holo forms). However, a majority of resolved structures are free of metal ions (apo forms). Moreover, metal binding is a dynamic process, often involving conformational rearrangement of the binding pocket. Thus, effective predictions need to be based on the structure of the apo state. Here, we report an approach that identifies transition metal-binding sites in apo forms with a resulting selectivity >95%. Applying the approach to apo forms in the Protein Data Bank and structural genomics initiative identifies a large number of previously unknown, putative metal-binding sites, and their amino acid residues, in some cases providing a first clue to the function of the protein.     

alpha-Lactalbumin: a calcium metalloprotein

Metal analyses and the studies of the effects of EDTA on unfolding reactions have shown that α-lactalbumin is a calcium metalloprotein. The role of the calcium binding in its biological activity is considered. A plausible site of binding is presented on the basis of the metal-binding site of lysozyme and of the structural models of the protein based on the lysozyme structure.     

Structural and binding studies of the three-metal center in two mycobacterial PPM Ser/Thr protein phosphatases

Phospho-Ser/Thr protein phosphatases (PPs) are dinuclear metalloenzymes classed into two large families, PPP and PPM, on the basis of sequence similarity and metal ion dependence. The archetype of the PPM family is the α isoform of human PP2C (PP2Cα), which folds into an α/β domain similar to those of PPP enzymes. The recent structural studies of three bacterial PPM phosphatases, Mycobacterium tuberculosis MtPstP, Mycobacterium smegmatis MspP, and Streptococcus agalactiae STP, confirmed the conservation of the overall fold and dinuclear metal center in the family, but surprisingly revealed the presence of a third conserved metal-binding site in the active site. To gain insight into the roles of the three-metal center in bacterial enzymes, we report structural and metal-binding studies of MtPstP and MspP. The structure of MtPstP in a new trigonal crystal form revealed a fully active enzyme with the canonical dinuclear metal center but without the third metal ion bound to the catalytic site. The absence of metal correlates with a partially unstructured flap segment, indicating that the third manganese ion contributes to reposition the flap, but is dispensable for catalysis. Studies of metal binding to MspP using isothermal titration calorimetry revealed that the three Mn²⁺-binding sites display distinct affinities, with dissociation constants in the nano- and micromolar range for the two catalytic metal ions and a significantly lower affinity for the third metal-binding site. In agreement, the structure of inactive MspP at acidic pH was determined at atomic resolution and shown to lack the third metal ion in the active site. Structural comparisons of all bacterial phosphatases revealed positional variations in the third metal-binding site that are correlated with the presence of bound substrate and the conformation of the flap segment, supporting a role of this metal ion in assisting enzyme-substrate interactions.     

Spectropotentiometric analysis of metal binding to structural zinc-binding sites: accounting quantitatively for pH and metal ion buffering effects

Studies of the metal-binding affinity of protein sites are ubiquitous in bioinorganic chemistry and are valuable for the information that they can provide about metal speciation and exchange in biological systems. The potential for error in these studies is high, however, since many competing equilibria are present in solution and must be taken into consideration. Here, we report a new spectropotentiometric titration apparatus that allows pH and UV-vis absorption to be monitored simultaneously on small samples under inert atmosphere. In addition, we explain how data obtained from the complex equilibria can be combined with tabulated information about the protonation and metal-binding constants for common buffers to provide detailed, quantitative information about metal-protein interactions. Application of this approach to the investigation of metal binding to structural zinc-binding domains and common pitfalls encountered when performing these experiments are also discussed. We have used this approach to reevaluate the metal-binding constants of the N-terminal zinc-binding peptide from the HIV-1 nucleocapsid protein (10(-8)M相似文献