Two human gamma-crystallin genes are linked and riddled with Alu-repeats

A human genomic cosmid clone, pHcos gamma-1, has been isolated containing two closely linked gamma-crystallin genes, oriented in the same direction. The sequence of these genes and their 5' and 3' flanking regions has been determined. The coding regions of both genes are interrupted by two introns. The first introns (94 and 100 bp, respectively) are located in the 5' region of the genes. The second introns (2.82 and 0.95 kb, respectively) divide the genes into two halves, each encoding a structural domain of the gamma-crystallin protein. The coding regions of the two genes show 80% homology. Due to a mutation in the splice acceptor site of the second intron of the first gene, the coding region of its third exon is 3 bp longer than that of the second gene. In the flanking regions several conserved sequence elements were found, including those elements that are known to be necessary for the correct expression of eukaryotic genes. The flanking and intronic regions of the genes contain 'simple sequence' DNA and Alu repeats. The Alu repeats are usually clustered, contain truncated elements, and are often located near simple sequence DNA.     

Isolation and complete nucleotide sequence of the gene for bovine parathyroid hormone

The structure of the bovine parathyroid hormone (PTH) gene has been analyzed by Southern blot hybridization of genomic DNA and by nucleotide sequence analysis of a cloned PTH gene. In the Southern analysis, several restriction enzymes produced single fragments that hybridized to PTH cDNA suggesting that there is a single bovine PTH gene. The restriction map of the cloned gene is the same as that determined by Southern blot analysis of bovine DNA. The sequence of 3154 bp of the cloned gene has been determined including 510 bp and 139 bp in the 5' and 3' flanking regions, respectively. The gene contains two introns which separate three exons that code primarily for: (i) the 5' untranslated region, (ii) the pre-sequence of preProPTH, and (iii) PTH and the 3' untranslated region. The gene contains 68% A + T and unusually long stretches of 100- to 150-bp sequences containing alternating A and T nucleotides in the 5' flanking region and intron A. The 5' flanking region contains two TATA sequences, both of which appear to be functional as determined by S1 nuclease mapping. Compared to the rat and human genes, the locations of the introns are identical but the sizes differ. Comparable human and bovine sequences in the flanking regions and introns are about 80% homologous.     

Complete nucleotide sequence of the chicken alpha A-crystallin gene and its 5' flanking region

The chicken alpha A-crystallin gene and 2.6 kb of its 5' flanking sequence have been isolated and characterized by electron microscopy and sequencing. The structural gene is 4.5 kb long and contains two introns, each approx. 1 kb in length. The first intron divides codons 63 and 64, and the second intron divides codons 104 and 105, as in rodents. There is little indication that the insert exon of rodents (an alternatively spliced sequence) is present in complete form in the chicken alpha A-crystallin gene; small stretches of similarity to this sequence were found throughout the gene. The 5' flanking sequence of the chicken alpha A-crystallin gene shows considerable sequence similarity with other mammalian alpha B-crystallin genes. In addition, one consensus sequence (GCAGCATGCCCTCCTAG) present in the 5' flanking region of the chicken alpha A-crystallin gene was found in the 5' flanking region of most reported crystallin genes.     

Characterization of the gene for prostate-specific antigen, a human glandular kallikrein

The gene for the human glandular kallikrein, prostate-specific antigen, has been cloned. The sequence of 7130 nucleotides encompassing the gene and 633 bp of 5' and 639 bp of 3' flanking DNA has been determined. The translation initiation site was slightly heterogeneous, yielding 5' non-translated leader sequences of 41 and 35 bp. The gene is divided into five exons, with introns located at positions identical with those found in other glandular kallikrein genes. The nucleotide sequence is very similar to that of the human kallikrein gene hGK-1, with 76 to 93% of the nucleotides being identical in the exons and 76 to 87% in the introns. The similarity also extends approximately 200 bp into the sequence flanking the 5' end of hGK-1 and several other, both human and rodent, glandular kallikrein genes.     

Structure of the human hepatic triglyceride lipase gene

The structure of the human hepatic triglyceride lipase gene was determined from multiple cosmid clones. All the exons, exon-intron junctions, and 845 bp of the 5' and 254 bp of the 3' flanking DNA were sequenced. Comparison of the exon sequences to three previously published cDNA sequences revealed differences in the sequence of the codons for residues 133, 193, 202, and 234 that may represent sequence polymorphisms. By primer extension, hepatic lipase mRNA initiates at an adenine 77 bases upstream of the translation initiation site. The hepatic lipase gene spans over 60 kb containing 9 exons and 8 introns, the latter being all located within the region encoding the mature protein. The exons are all of average size (118-234 bp). Exon 1 encodes the signal peptide, exon 4, a region that binds to the lipoprotein substrate, and exon 5, an evolutionarily highly conserved region of potential catalytic function, and exons 6 and 9 encode sequences rich in basic amino acids thought to be important in anchoring the enzyme to the endothelial surface by interacting with acidic domains of the surface glycosaminoglycans. The human lipoprotein lipase gene has been recently reported to have an identical exon-intron organization containing the analogous structural domains [Deeb & Peng (1989) Biochemistry 28, 4131-4135]. Our observations strongly support the common evolutionary origin of these two lipolytic enzymes.     

Cloning of the gene for the thyrotropin beta subunit in the Japanese crested ibis,Nipponia nippon

We isolated a putative gene for the thyrotropin beta subunit (TSHbeta) from two types of genomic libraries of the Japanese crested ibis, Nipponia nippon. Exon-intron structure was deduced by comparing the determined sequence with those of TSH beta cDNA of other birds. The deduced amino acid sequence shows extensive similarities to those of the other birds, which assures our assumption that the acquired nucleotide sequence represents the TSHbeta gene. The assembled genomic fragment is 4192 bp in size and consists of 1937 bp of putative 5' flanking region followed by exon-intron structure with three exons and two introns, similar to those observed in rat, human and goldfish counterparts. Locations of introns are also similar to those in mammals and goldfish. Comparison of the 5' flanking region of the ibis TSHbeta gene with those of mammals reveals that several regulatory sequences, such as negative thyroid hormone responsive element (nTRE), Pit-1 responsive element, and AP-1 responsive element, which were characterized in mammalian TSHbeta genes, are also found in the promoter region. This is the first report on the exon-intron structure and 5' flanking region of the TSHbeta gene in an avian species.     

Structure and evolution of the bovine prothrombin gene

The cloned bovine prothrombin gene has been characterized by partial DNA sequence analysis, including the 5' and 3' flanking sequences and all the intron-exon junctions. The gene is approximately 15.4 x 10(3) base-pairs in length and comprises 14 exons interrupted by 13 introns. The exons coding for the prepro-leader peptide and the gamma-carboxyglutamic acid-containing region are similar in organization to the corresponding exons in the factor IX and protein C genes. This region has probably evolved as a result of recent gene duplication and exon shuffling events. The exons coding for the kringles and the serine protease region of the prothrombin gene are different in organization from the homologous regions in other genes, suggesting that introns have been inserted into these regions after the initial gene duplication events.     

Structure and chromosome assignment of the murine p36 (calpactin I heavy chain) gene

p36 is a major substrate of both viral and growth factor receptor associated protein kinases. This protein has recently been named calpactin I heavy chain since it is the large subunit of a Ca2(+)-dependent phospholipid and actin binding heterotetramer. The primary structure of p36 has been determined from analysis of cloned cDNA. The protein contains 338 amino acids, has an approximate molecular weight of 39,000, and is comprised of several distinct domains, including four 75 amino acid repeats. From two overlapping cosmid clones isolated from different mouse genomic liver libraries, the complete intron/exon structure of the p36 gene was determined and the 5' and 3' noncoding regions of the gene were analyzed. The coding and 3' untranslated region of the p36 gene contains 12 exons which range in size from 48 to 322 base pairs (bp) with an average size of 107 bp. The repeat structures found at the protein level are not delineated by single exons, but the N-terminal p11-binding domain is encoded by a single exon. Structural mapping of the gene demonstrated that the lengths of the first two introns in the coding region are together approximately 6 kilobases (kb), while the other introns range in size from 600 to 3600 bp with an average size of 1650 bp. The p36 gene is at least 22 kb in length and has a coding sequence of approximately 1 kb, representing only 4.5% of the gene.(ABSTRACT TRUNCATED AT 250 WORDS)     

The human alpha-fetoprotein gene. Sequence organization and the 5' flanking region

The human alpha-fetoprotein (AFP) gene was isolated into three overlapping clones in bacteriophage lambda vectors and its sequence organization analyzed by restriction endonuclease mapping and nucleotide sequencing. The human AFP gene is about 20 kilobase pairs long and contains 15 exons and 14 introns. The overall organization of the human AFP gene is similar to that of the mouse AFP gene, with all but two exons showing identical sizes. Nucleotide sequences at all exon/intron junctions display similarity to the consensus boundary sequence (Breathnach, R., and Chambon, P. (1981) Annu. Rev. Biochem. 50, 349-383), with the GT-AG rule applied to the splicing point. The cap site maps 44 nucleotides upstream from the translation initiation site. The "TATA box" is located 27 nucleotides upstream from the putative cap site and is flanked by sequences with dyad symmetry. The TATA box can thus be placed in the loop portion of a possible stem-loop structure formed by intrastrand base-pairing. Other characteristic nucleotide sequences in the 5' flanking region include a CCAAC pentamer, a 14-base pair (bp) enhancer-like sequence, and a 9-bp sequence homologous to the glucocorticoid responsive element. A long (90 bp) direct repeat and several alternating purine/pyrimidine sequences are also present in the 5' flanking region. A 736-bp sequence of the 5' flanking region adjacent to the cap site of the human AFP gene shows a 61% similarity with the corresponding region of the mouse AFP gene. There are two Alu family sequences and two poly(dT-dG) repeats in the human AFP gene that show different distribution patterns from those in the mouse AFP gene.     

Structure of the murine complement factor H gene

Factor H is a regulatory protein of the alternative pathway of complement activation comprised of 20 tandem repeating units of 60 amino acids each. A factor H cDNA clone was used to identify 17 genomic clones from a cosmid library. Four clones were selected for analysis of intron/exon junctions and 5' and 3' regions of the gene and for mapping of the exons. The factor H gene was found to be comprised of 22 exons. Each repeating unit is encoded by one exon, except the second repeat, which is coded by two exons; the leader sequence is encoded by a separate exon. The exons range in size from 77 to 210 base pairs (bp) and average 178 bp. They span a region of approximately 100 kilobases (kb) on chromosome 1. The leader sequence exon is 26 kb upstream of the first repeat exon, representing the largest intron. The other introns range in size from 86 bp to 12.9 kb, and the average intron size is 4.7 kb. Analysis of the genomic organization of the factor H gene has provided insight into the protein structure and will enable the construction of deletion mutants for functional studies.