The guanosine binding mechanism of the Tetrahymena group I intron.

The Tetrahymena group I intron catalyzes self-splicing through two consecutive transesterification reactions, using a single guanosine-binding site (GBS). In this study, we constructed a model RNA that contains the GBS and a conserved guanosine nucleotide at the 3'-terminus of the intron (omegaG). We determined by NMR the solution structure of this model RNA, and revealed the guanosine binding mechanism of the group I intron. The G22 residue, corresponding to omegaG, participates in a base triple, G22 xx G3 x C12, hydrogen-bonding to the major groove edge of the Watson-Crick G3 x C12 pair. The G22 residue also interacts with A2, which is semi-conserved in all sequenced group I introns.     

Specificity from steric restrictions in the guanosine binding pocket of a group I ribozyme

The 3' splice site of group I introns is defined, in part, by base pairs between the intron core and residues just upstream of the splice site, referred to as P9.0. We have studied the specificity imparted by P9.0 using the well-characterized L-21 Scal ribozyme from Tetrahymena by adding residues to the 5' end of the guanosine (G) that functions as a nucleophile in the oligonucleotide cleavage reaction: CCCUCUA5 (S) + NNG <--> CCCUCU + NNGA5. UCG, predicted to form two base pairs in P9.0, reacts with a (kcat/KM) value approximately 10-fold greater than G, consistent with previous results. Altering the bases that form P9.0 in both the trinucleotide G analog and the ribozyme affects the specificity in the manner predicted for base-pairing. Strikingly, oligonucleotides incapable of forming P9.0 react approximately 10-fold more slowly than G, for which the mispaired residues are simply absent. The observed specificity is consistent with a model in which the P9.0 site is sterically restricted such that an energetic penalty, not present for G, must be overcome by G analogs with 5' extensions. Shortening S to include only one residue 3' of the cleavage site (CCCUCUA) eliminates this penalty and uniformly enhances the reactions of matched and mismatched oligonucleotides relative to guanosine. These results suggest that the 3' portion of S occupies the P9.0 site, sterically interfering with binding of G analogs with 5' extensions. Similar steric effects may more generally allow structured RNAs to avoid formation of incorrect contacts, thereby helping to avoid kinetic traps during folding and enhancing cooperative formation of the correct structure.     

CRS1, a chloroplast group II intron splicing factor, promotes intron folding through specific interactions with two intron domains

Group II introns are ribozymes that catalyze a splicing reaction with the same chemical steps as spliceosome-mediated splicing. Many group II introns have lost the capacity to self-splice while acquiring compensatory interactions with host-derived protein cofactors. Degenerate group II introns are particularly abundant in the organellar genomes of plants, where their requirement for nuclear-encoded splicing factors provides a means for the integration of nuclear and organellar functions. We present a biochemical analysis of the interactions between a nuclear-encoded group II splicing factor and its chloroplast intron target. The maize (Zea mays) protein Chloroplast RNA Splicing 1 (CRS1) is required specifically for the splicing of the group II intron in the chloroplast atpF gene and belongs to a plant-specific protein family defined by a recently recognized RNA binding domain, the CRM domain. We show that CRS1's specificity for the atpF intron in vivo can be explained by CRS1's intrinsic RNA binding properties. CRS1 binds in vitro with high affinity and specificity to atpF intron RNA and does so through the recognition of elements in intron domains I and IV. These binding sites are not conserved in other group II introns, accounting for CRS1's intron specificity. In the absence of CRS1, the atpF intron has little uniform tertiary structure even at elevated [Mg2+]. CRS1 binding reorganizes the RNA, such that intron elements expected to be at the catalytic core become less accessible to solvent. We conclude that CRS1 promotes the folding of its group II intron target through tight and specific interactions with two peripheral intron segments.     

Contributions of individual nucleotides to tertiary binding of substrate by a Pneumocystis carinii group I intron

Pneumocystis carinii is a mammalian pathogen that infects and kills immunocompromised hosts such as cancer and AIDS patients. The LSU rRNA precursor of P. carinii contains a conserved group I intron that is an attractive drug target because humans do not contain group I introns. The oligonucleotide r(AUGACU), whose sequence mimics the 3'-end of the 5'-exon, binds to a ribozyme derived from the intron with a K(d) of 5.2 nM, which is 61000-fold tighter than expected from base-pairing alone [Testa, S. M., Haidaris, G. C., Gigliotti, F., and Turner, D. H. (1997) Biochemistry 36, 9379-9385]. Thus, oligonucleotide binding is enhanced by tertiary interactions. To localize interactions that give rise to this tertiary stability, binding to the ribozyme has been measured as a function of oligonucleotide length and sequence. The results indicate that 4.3 kcal/mol of tertiary stability is due to a G.U pair that forms at the intron's splice junction. Eliminating nucleotides at the 5'-end of r(AUGACU) does not affect intron binding more than expected from differences in base-pairing until r((___)ACU), which binds much more tightly than expected. Adding a C at the 5'- or 3'-end that can potentially form a C-G pair with the target has little effect on binding affinity. Truncated oligonucleotides were tested for their ability to inhibit intron self-splicing via a suicide inhibition mechanism. The tetramer, r((__)GACU), retains similar binding affinity and reactivity as the hexamer, r(AUGACU). Thus oligonucleotides as short as tetramers might serve as therapeutics that can use a suicide inhibition mechanism to inhibit self-splicing. Results with a phosphoramidate tetramer and thiophosphoramidate hexamer indicate that oligonucleotides with backbones stable to nuclease digestion retain favorable binding and reactivity properties.     

CBP2 protein promotes in vitro excision of a yeast mitochondrial group I intron.

The terminal intron (bI2) of the yeast mitochondrial cytochrome b gene is a group I intron capable of self-splicing in vitro at high concentrations of Mg2+. Excision of bI2 in vivo, however, requires a protein encoded by the nuclear gene CBP2. The CBP2 protein has been partially purified from wild-type yeast mitochondria and shown to promote splicing at physiological concentrations of Mg2+. The self-splicing and protein-dependent splicing reactions utilized a guanosine nucleoside cofactor, the hallmark of group I intron self-splicing reactions. Furthermore, mutations that abolished the autocatalytic activity of bI2 also blocked protein-dependent splicing. These results indicated that protein-dependent excision of bI2 is an RNA-catalyzed process involving the same two-step transesterification mechanism responsible for self-splicing of group I introns. We propose that the CBP2 protein binds to the bI2 precursor, thereby stabilizing the catalytically active structure of the RNA. The same or a similar RNA structure is probably induced by high concentrations of Mg2+ in the absence of protein. Binding of the CBP2 protein to the unspliced precursor was supported by the observation that the protein-dependent reaction was saturable by the wild-type precursor. Protein-dependent splicing was competitively inhibited by excised bI2 and by a splicing-defective precursor with a mutation in the 5' exon near the splice site but not by a splicing-defective precursor with a mutation in the core structure. Binding of the CBP2 protein to the precursor RNA had an effect on the 5' splice site helix, as evidenced by suppression of the interaction of an exogenous dinucleotide with the internal guide sequence.     

Molecular recognition properties of IGS-mediated reactions catalyzed by a Pneumocystis carinii group I intron

We report the development, analysis and use of a new combinatorial approach to analyze the substrate sequence dependence of the suicide inhibition, cyclization, and reverse cyclization reactions catalyzed by a group I intron from the opportunistic pathogen Pneumocystis carinii. We demonstrate that the sequence specificity of these Internal Guide Sequence (IGS)-mediated reactions is not high. In addition, the sequence specificity of suicide inhibition decreases with increasing MgCl₂ concentration, reverse cyclization is substantially more sequence specific than suicide inhibition, and multiple reverse cyclization products occur, in part due to the formation of multiple cyclization intermediates. Thermodynamic analysis reveals that a base pair at position –4 of the resultant 5′ exon–IGS (P1) helix is crucial for tertiary docking of the P1 helix into the catalytic core of the ribozyme in the suicide inhibition reaction. In contrast to results reported with a Tetrahymena ribozyme, altering the sequence of the IGS of the P.carinii ribozyme can result in a marked reduction in tertiary stability of docking the resultant P1 helix into the catalytic core of the ribozyme. Finally, results indicate that RNA targeting strategies which exploit tertiary interactions could have low specificity due to the tolerance of mismatched base pairs.     

Recognition elements for 5' exon substrate binding to the Candida albicans group I intron

A group I intron precursor and ribozyme were cloned from the large subunit rRNA of the human pathogen Candida albicans. Both the precursor and ribozyme are functional as determined from in vitro assays. Comparisons of dissociation constants for oligonucleotide binding to the ribozyme and to a hexanucleotide mimic of its internal guide sequence lead to a model for recognition of the 5' exon substrate by this intron. In particular, tertiary contacts with the P1 helix that help align the splice site include three 2'-hydroxyl groups, a G.U pair that occurs at the intron's splice junction, and a G.A pair. The free energy contribution that each interaction contributes to tertiary binding is determined. When the G.A pair is replaced with a G-C pair, tertiary interactions to 5' exon mimic 2'-hydroxyl groups are significantly weakened. When the G.A pair is replaced with a G.U pair, tertiary interactions are retained and binding is 10-fold tighter. These results expand our knowledge of substrate recognition by group I introns, and also provide a basis for rational design of oligonucleotide-based therapeutics for targeting group I introns by binding enhancement by tertiary interactions and suicide inhibition strategies.     

Characterization of the Azoarcus ribozyme: tight binding to guanosine and substrate by an unusually small group I ribozyme

We report novel chemical properties of the ribozyme derived from the smallest group I intron (subgroup IC3) that comes from the pre-tRNA(Ile) of the bacterium Azoarcus sp. BH72. Despite the small size of the Azoarcus ribozyme (195 nucleotides (nt)), it binds tightly to the guanosine nucleophile (Kd = 15 +/- 3 microM) and exhibits activity at high temperatures (approximately 60-70 degrees C). These features may be due to the two GA3 tetraloop interactions postulated in the intron and the high GC content of the secondary structure. The second order rate constant for the Azoarcus ribozyme, ((k(cat)/Km)S = 8.4 +/- 2.1 x 10(-5) M(-1) min(-1)) is close to that found for the related ribozyme derived from the pre-tRNA(Ile) of the cyanobacterium Anabaena PCC7120. pH dependence studies and kinetic analyses of deoxy-substituted substrates suggest that the chemical cleavage step is the rate-determining process in the Azoarcus ribozyme. This may be due to the short 3-nt guide sequence-substrate pairing present in the Azoarcus ribozyme. Finally, the Azoarcus ribozyme shares features conserved in other group I ribozymes including the pH profile, the stereospecificity for the Rp-phosphorothioate at the cleavage site and the 1000-fold decrease in cleavage rate with a deoxyribonucleoside leaving group.     

Structural requirement for Mg2+ binding in the group I intron core

Divalent metal ions are required for splicing of group I introns, but their role in maintaining the structure of the active site is still under investigation. Ribonuclease and hydroxyl radical footprinting of a small group I intron from Azoarcus pre-tRNA(Ile) showed that tertiary interactions between helical domains are stable in a variety of cations. Only Mg(2+), however, induced a conformational change in the intron core that correlates with self-splicing activity. Three metal ion binding sites in the catalytic core were identified by Tb(III)-dependent cleavage. Two of these are near bound substrates in a three-dimensional model of the ribozyme. A third metal ion site is near an A minor motif in P3. In the pre-tRNA, Tb(3+) cleavage was redirected to the 5' and 3' splice sites, consistent with metal-dependent activation of splice site phosphodiesters. The results show that many counterions induce global folding, but organization of the group I active site is specifically linked to Mg(2+) binding at a few sites.     

The environment of two metal ions surrounding the splice site of a group I intron.

Several divalent metal ions (Ca2+, Sr2+ and Pb2+) do not promote splicing, but instead induce cleavage at a single site in the conserved group I intron core in the absence of the guanosine cofactor at elevated pH, generating products with 5'-OH and 3'-phosphate ends. The reaction is competed by Mg2+, which does not cleave at this position, but hydrolyses the splice sites producing 3'-OH and 5'-phosphate ends. Mn2+ promotes both core cleavage and splice site hydrolysis under identical conditions, suggesting that two different metal atoms are involved, each responsible for one type of cleavage, and with different chemical and geometric requirements. Based on the core cleavage position and on the previously proposed coordination sites for Mg2+, we propose a structural location for two metal ions surrounding the splice site in the Michel-Westhof three-dimensional model of the group I intron core. The proposed location was strengthened by a first mutational analysis which supported the suggested interaction between one of the metal ions and the bulged residue in P7.     

Conserved thermochemistry of guanosine nucleophile binding for structurally distinct group I ribozymes.

We report thermodynamic values for binding of the guanosine nucleophile to the ribozyme derived from the Anabaena group I intron, and find that they are similar to those measured previously for the structurally distinct Tetrahymena ribozyme. The free energy of binding guanosine 5'-monophosphate (pG) at 30 degrees C is similar for the two ribozymes. The delta(H)degrees' and delta(S)degrees' for pG binding to the Anabaena ribozyme--RNA substrate complex (E x S) are 3.4 +/- 4 kcal/mol and 27 +/- 10 e.u., respectively. The negligible enthalpic contribution and positive entropy change were found previously for the Tetrahymena ribozyme, and are considered remarkable for a hydrogen-bonding interaction between a nucleotide and a nucleic acid. These thermodynamic values may reflect conformational changes or water release upon pG binding that are comparable for the two ribozymes. In addition, the apparent chemical steps of the two ribozyme reactions share similar activation energies and a positive deltaS++. It now appears that such thermochemical values for guanosine binding and activation may be intrinsic properties of the group I intron catalytic center.     

Optimizing the substrate specificity of a group I intron ribozyme

Group I ribozymes can repair mutant RNAs via trans-splicing. Unfortunately, substrate specificity is quite low for the trans-splicing reaction catalyzed by the group I ribozyme from Tetrahymenathermophila. We have used a systematic approach based on biochemical knowledge of the function of the Tetrahymena ribozyme to optimize its ability to discriminate against nonspecific substrates in vitro. Ribozyme derivatives that combine a mutation which indirectly slows down the rate of the chemical cleavage step by weakening guanosine binding with additional mutations that weaken substrate binding have greatly enhanced specificity with short oligonucleotide substrates and an mRNA fragment derived from the p53 gene. Moreover, compared to the wild-type ribozyme, reaction of a more specific ribozyme with targeted substrates is much less sensitive to the presence of nonspecific RNA competitors. These results demonstrate how a detailed understanding of the biochemistry of a catalytic RNA can facilitate the design of customized ribozymes with improved properties for therapeutic applications.     

A DExH/D-box protein coordinates the two steps of splicing in a group I intron

Proteins of the DExH/D family are ATPases that can unwind duplex RNA in vitro. Individual members of this family coordinate many steps in ribonucleoprotein enzyme assembly and catalysis in vivo, but it is largely unknown how the action of these co-factors is specified and precisely timed. As a first step to address this question biochemically, we describe the development of a new protein-dependent group I intron splicing system that requires such an ATPase for coordinating successive steps in splicing. While genetic analysis in yeast has shown that at least five nuclear-encoded proteins are required for splicing of the mitochondrial aI5β group I intron, we show that efficient in vitro splicing of aI5β occurs with only two of these co-factors and, furthermore, they fulfill distinct functions in vitro. The Mrs1p protein stabilizes RNA structure and promotes the first step in splicing. In contrast, a DExH/D protein, Mss116p, acts after the first step and, utilizing ATP hydrolysis, specifically enhances the efficiency of exon ligation. An analysis of Mss116p variants with mutations that impair its RNA-stimulated ATP hydrolysis activity or reduce its ability to unwind duplexes show that the efficiency of ATP hydrolysis is a major determinant in promoting exon ligation. These observations suggest that Mss116p acts in aI5β splicing by catalyzing changes in the structure of the RNA/protein splicing intermediate that promote the second step. More broadly, these observations are consistent with a model in which the “functional-timing” of DExH/D-box protein action can be specified by a specific conformation of its substrate due to the “upstream” activity of other co-factors.     

A tyrosyl-tRNA synthetase adapted to function in group I intron splicing by acquiring a new RNA binding surface

We determined a 1.95 A X-ray crystal structure of a C-terminally truncated Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) that functions in splicing group I introns. CYT-18's nucleotide binding fold and intermediate alpha-helical domains superimpose on those of bacterial TyrRSs, except for an N-terminal extension and two small insertions not found in nonsplicing bacterial enzymes. These additions surround the cyt-18-1 mutation site and are sites of suppressor mutations that restore splicing, but not synthetase activity. Highly constrained models based on directed hydroxyl radical cleavage assays show that the group I intron binds at a site formed in part by the three additions on the nucleotide binding fold surface opposite that which binds tRNATyr. Our results show how essential proteins can progressively evolve new functions.     

Bidirectional effectors of a group I intron ribozyme.

The group I self-splicing introns found in many organisms are competitively inhibited by L-arginine. We have found that L-arginine acts stereoselectively on the Pc1. LSU nuclear group I intron of Pneumocystis carinii, competitively inhibiting the first (cleavage) step of the splicing reaction and stimulating the second (ligation) step. Stimulation of the second step is most clearly demonstrated in reactions whose first step is blocked after 15 min by addition of pentamidine. The guanidine moiety of arginine is required for both effects. L-Canavanine is a more potent inhibitor than L-arginine yet it fails to stimulate. L-Arginine derivatized on its carboxyl group as an amide, ester or peptide is more potent than L-arginine as a stimulator and inhibitor, with di-arginine amide and tri-arginine being the most potent effectors tested. The most potent peptides tested are 10,000 times as effective as L-arginine in inhibiting ribozyme activity, and nearly 400 times as effective as stimulators. Arginine and some of its derivatives apparently bind to site(s) on the ribozyme to alter its conformation to one more active in the second step of splicing while competing with guanosine substrate in the first step. This phenomenon indicates that ribozymes, like protein enzymes, can be inhibited or stimulated by non-substrate low molecular weight compounds, which suggests that such compounds may be developed as pharmacological agents acting on RNA targets.     

Crystal structure of a group I intron splicing intermediate

A recently reported crystal structure of an intact bacterial group I self-splicing intron in complex with both its exons provided the first molecular view into the mechanism of RNA splicing. This intron structure, which was trapped in the state prior to the exon ligation reaction, also reveals the architecture of a complex RNA fold. The majority of the intron is contained within three internally stacked, but sequence discontinuous, helical domains. Here the tertiary hydrogen bonding and stacking interactions between the domains, and the single-stranded joiner segments that bridge between them, are fully described. Features of the structure include: (1) A pseudoknot belt that circumscribes the molecule at its longitudinal midpoint; (2) two tetraloop-tetraloop receptor motifs at the peripheral edges of the structure; (3) an extensive minor groove triplex between the paired and joiner segments, P6-J6/6a and P3-J3/4, which provides the major interaction interface between the intron's two primary domains (P4-P6 and P3-P9.0); (4) a six-nucleotide J8/7 single stranded element that adopts a mu-shaped structure and twists through the active site, making critical contacts to all three helical domains; and (5) an extensive base stacking architecture that realizes 90% of all possible stacking interactions. The intron structure was validated by hydroxyl radical footprinting, where strong correlation was observed between experimental and predicted solvent accessibility. Models of the pre-first and pre-second steps of intron splicing are proposed with full-sized tRNA exons. They suggest that the tRNA undergoes substantial angular motion relative to the intron between the two steps of splicing.     

Structure and thermodynamics of metal binding in the P5 helix of a group I intron ribozyme.

The solution structure of an RNA hairpin modelling the P5 helix of a group I intron, complexed with Co(NH3)63+, has been determined by nuclear magnetic resonance. Co(NH3)63+, which possesses a geometry very close to Mg(H2O)62+, was used to identify and characterize a Mg2+binding site in the RNA. Strong and positive intermolecular nuclear Overhauser effect (NOE) cross-peaks define a specific complex in which the Co(NH3)63+molecule is in the major groove of tandem G.U base-pairs. The structure of the RNA is characterized by a very low twist angle between the two G.U base-pairs, providing a flat and narrowed major groove. The Co(NH3)63+, although highly localized, is free to rotate to hydrogen bond in several ways to the O4 atoms of the uracil bases and to N7 and O6 of the guanine bases. Negative and small NOE cross-peaks to other protons in the sequence reveal a non-specific or delocalized interaction, characterized by a high mobility of the cobalt ion. Mn2+titrations of P5 show specific broadening of protons of the G.U base-pairs that form the metal ion binding site, in agreement with the NOE data from Co(NH3)63+. Binding constants for the interaction of Co(NH3)63+and of Mg2+to P5 were determined by monitoring imino proton chemical shifts during titration of the RNA with the metal ions. Dissociation constants are on the order of 0.1 mM for Co(NH3)63+and 1 mM for Mg2+. Binding studies were done on mutants with sequences corresponding to the three orientations of tandem G.U base-pairs. The affinities of Co(NH3)63+and Mg2+for the tandem G.U base-pairs depend strongly on their sequences; the differences can be understood in terms of the different structures of the corresponding metal ion-RNA complexes. Substitution of G.C or A.U for G.U pairs also affected the binding, as expected. These structural and thermodynamic results provide systematic new information about major groove metal ion binding in RNA.