首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
3.

Background

Lentiviral vectors allow gene transfer into non‐dividing cells. Further development of these vector systems requires stable packaging cell lines that enable adequate safety testing.

Methods

To generate a packaging cell line for vectors based on simian immunodeficiency virus (SIV), expression plasmids were constructed that contain the codon‐optimized gag‐pol gene of SIV and the gene for the G protein of vesicular stomatitis virus (VSV‐G) under the control of an ponasterone‐inducible promoter. Stable cell lines expressing these packaging constructs were established and characterized.

Results

The RT activity and vector titers of cell clones stably transfected with the inducible gag‐pol expession plasmid could be induced by ponasterone by more than a factor of 1000. One of these clones was subsequently transfected with the ponasterone‐inducible VSV‐G expression plasmid to generate packaging cells. Clones of the packaging cells were screened for vector production by infection with an SIV vector and subsequent induction by ponasterone. In the supernatant of selected ponasterone‐induced producer clones vector titers of more than 1×105 transducing units/ml were obtained. Producer cell clones were stable for at least five months, as tested by vector production.

Conclusions

The packaging cells described should be suitable for most preclinical applications of SIV‐based vectors. By avoiding regions of high homology between the vector and the packaging constructs, the design of the SIV packaging cell line should reduce the risk of transfer of packaging genes to target cells and at the same time provide flexibility with respect to the SIV vector constructs that can be packaged. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

4.

Background

Because gene therapy of the future will primarily take an in vivo approach, a number of problems associated with its current implementation exist. Currently, repeated delivery of a vector in vivo is necessary to ensure adequate transfer of the therapeutic gene. This may lead to the development of an immune response against the vector, thus interfering with gene delivery. To circumvent this problem, retroviral vector packaging cells that permanently produce recombinant retroviral vector particles have been encapsulated.

Methods

Vector (pBAG)‐producing amphotropic cells were encapsulated in beads composed of polymerized cellulose sulphate. These capsules were analysed in vitro for expression of the vector construct using X‐gal staining, as well as for the release of particles by performing RT‐PCR from culture supernatant. Infectivity studies were performed in vitro and in vivo. The latter was assayed using histological sections of the microcapsule and the surrounding area stained for β‐galactosidase activity and by RT‐PCR.

Results

In culture, the virus‐producing cells inside the capsules remained viable and released virus into the culture medium for at least 6 weeks. To test whether these capsules, upon implantation into mice, also release vector virions that infect the surrounding cells, two different models were used. In the first, capsules were implanted in the fat pad of the mammary gland of Balb/c mice. The capsules were well tolerated for at least 6 weeks and a self‐limiting inflammatory reaction without any other gross immune response was observed during this period. Furthermore, the virus‐producing cells remained viable. In the second model, SCID mice were immunologically reconstituted by subcutaneous implantation of thymus lobes from MHC‐identical Balb/c newborn mice and gene transfer into lymphoid cells was achieved by retroviral vectors released by co‐implanted capsules.

Conclusion

The implantation of such capsules containing cells that continually produce retroviral vector particles may be of use for in vivo gene therapy strategies. The data presented demonstrate the feasibility of the concept. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

5.

Background

Several approaches for gene therapy of cystic fibrosis using viral and non‐viral vectors are currently being undertaken. Nevertheless, the present data suggest that vectors currently being used will either have to be further modified or, alternatively, novel vector systems need to be developed. Recently, bacteria have been proven as suitable vehicles for DNA transfer to a wide variety of eukaryotic cells. In this study, we assessed the ability of the facultative intracellular pathogen Listeria monocytogenes to deliver a cDNA encoding the human cystic fibrosis transmembrane conductance regulator (CFTR) to CHO‐K1 cells, since these cells have been extensively used for heterologous CFTR expression.

Methods

An established in vitro gene transfer system based on antibiotic‐mediated lysis of intracellular L. monocytogenes was exploited to transfer eukaryotic expression plasmids. Transient as well as stable CFTR transgene expression was analyzed by microscopical and biochemical methods; functionality was tested by whole‐cell patch‐clamp recordings.

Results

L. monocytogenes mediated gene transfer to CHO‐K1 cells was facilitated by an improved transfection protocol. In addition, the use of the isogenic mutant L. monocytogenes hlyW491A, engineered to produce a hemolysin variant with low toxigenic activity, greatly enhanced the efficiency of gene transfer. This strain allowed the transfer of functional CFTR to CHO‐K1 cells.

Conclusions

This is the first demonstration of L. monoyctogenes mediated CFTR transgene transfer. The successful in vitro transfer suggests that L. monocytogenes might be a potential vector for cystic fibrosis gene therapy or alternative applications and deserves further investigation in vitro as well as in vivo. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

6.

Background

The helper‐dependent (HD) adenoviral (Ad) vector relies on a helper virus to provide viral proteins for vector amplification. HD‐Ad vectors can significantly increase therapeutic gene expression and improve safety. However, the yield of an HD‐Ad vector is generally lower than that of an E1‐deleted first‐generation vector, likely due to the alterations in viral E3 or packaging regions of a helper virus that attenuate its replication and complementing for an HD‐Ad vector.

Methods

To study this question and improve HD‐Ad vector production, we have generated four different helper viruses with a wild‐type or deleted E3 region, and with a relocated loxP. We have also constructed a first‐generation vector with a wild‐type E3 region and without the loxP site. We compared the replication of these viruses in Cre‐positive and ‐negative cells and studied their complementing for HD‐Ad vector production.

Results

Viruses with deleted E3 formed smaller plaques and produced lower titer compared with viruses containing the E3 region. The site where a loxP is inserted can also affect virus replication. Higher yield of HD‐Ad vector was obtained when a helper virus with wild‐type E3 was used. We also showed that deletion of the packaging signal in a helper virus through loxP/Cre interaction decreased the viral DNA complementing ability.

Conclusions

Although the E3 region is not essential for adenovirus replication in vivo, deletion of this region attenuates virus replication. Production of HD‐Ad vector can be further improved by modifications in helper virus structure. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

7.

Background

Adeno‐associated virus serotype 2 (AAV2) vectors show considerable promise for ocular gene transfer. However, one potential barrier to efficacious long‐term therapy is the development of immune responses against the vector or transgene product.

Methods

We evaluated cellular and humoural responses in mice following both single and repeated subretinal administration of AAV2, and examined their effects on RPE65 and green fluorescent protein transgene expression.

Results

Following subretinal administration of vector, splenocytes and T‐cells from draining lymph nodes showed minimal activation following stimulation by co‐culture with AAV2. Neutralizing antibodies (NAbs) were not detected in the ocular fluids of any mice receiving AAV2 or in the serum of mice receiving a lower dose. NAbs were present in the serum of a proportion of mice receiving a higher dose of the vector. Furthermore, no differences in immunoglobulin titre in serum or ocular fluids against RPE65 protein or AAV2 capsid between treated and control mice were detected. Histological examination showed no evidence of retinal toxicity or leukocyte infiltration compared to uninjected eyes. Repeat administration of low‐dose AAV.hRPE65.hRPE65 to both eyes of RPE65?/? mice resulted in transgene expression and functional rescue, but re‐administration of high‐dose AAV2 resulted in boosted NAb titres and variable transgene expression in the second injected eye.

Conclusions

These data, which were obtained in mice, suggest that, following subretinal injection, immune responses to AAV2 are dose‐dependent. Low‐dose AAV2 is well tolerated in the eye, with minimal immune responses, and transgene expression after repeat administration of vector is achievable. Higher doses lead to the expression of NAbs that reduce the efficacy of repeated vector administration. Copyright © 2009 John Wiley & Sons, Ltd.
  相似文献   

8.
9.

Background

A number of properties have relegated the use of Moloney murine leukemia virus (Mo‐MLV)‐based retrovirus vectors primarily to ex vivo protocols. Direct implantation of retrovirus producer cells can bypass some of the limitations, and in situ vector production may result in a large number of gene transfer events. However, the fibroblast nature of most retrovirus packaging cells does not provide for an effective distribution of vector producing foci in vivo, especially in the brain. Effective development of new retrovirus producer cells with enhanced biologic properties may require the testing of a large number of different cell types, and a quick and efficient method to generate them is needed.

Methods

Moloney murine leukemia virus (Mo‐MLV) gag‐pol and env genes and retrovirus vector sequences carrying lacZ were cloned into different minimal HSV/AAV hybrid amplicons. Helper virus‐free amplicon vectors were used to co‐infect glioma cells in culture. Titers and stability of retrovirus vector production were assessed.

Results

Simultaneous infection of two glioma lines, Gli‐36 (human) and J3T (dog), with both types of amplicon vectors, generated stable packaging populations that produced retrovirus titers of 0.5–1.2×105 and 3.1–7.1×103 tu/ml, respectively. Alternatively, when cells were first infected with retrovirus vectors followed by infection with HyRMOVAmpho amplicon vector, stable retrovirus packaging populations were obtained from Gli‐36 and J3T cells producing retrovirus titers comparable to those obtained with a traditional retrovirus packaging cell line, ΨCRIPlacZ.

Conclusions

This amplicon vector system should facilitate generation of new types of retrovirus producer cells. Conversion of cells with migratory or tumor/tissue homing properties could result in expansion of the spatial distribution or targeting capacity, respectively, of gene delivery by retrovirus vectors in vivo. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

10.

Background

Adenovectors are widely used for efficient delivery of genes into a variety of cell types and organisms. However, the construction of the desired vector/genes combination, especially if it involves the cloning of several gene cassettes, can be laborious due to the large size of these vectors. New methods are needed to simplify the construction of complex combinations of gene cassettes into adenovectors.

Methods

Using simple cloning techniques and exploiting the λ‐phage packaging system, we devised efficient methods for the ‘selection’ of the desired vector constructs. Thus we generated a series of cosmids containing the adeno helper dependent (HD) backbone in which we inserted cis‐ and trans‐acting tetracycline (tet) elements for the regulation of any gene of interest. One of these cosmids has been used to produce an HD adenovirus carrying a tetracycline‐regulated gene expressing β‐galactosidase.

Results

We have demonstrated that the adeno‐cosmid system allows rapid and efficient cloning of genes of interest in helper dependent vectors, and described a prototype ‘ready‐to‐use’ vector in which any gene of interest can be easily expressed under the control of the tet system. The HD viruses produced with this novel methodology can be grown at high titers, can be easily separated from the helper adenovirus, and allow delivery and regulated gene expression in a variety of tissues.

Conclusions

Exploiting the λ‐packaging system, complex adeno constructs can be generated with a simple and reproducible protocol, which allows selection of the desired size construct, counterselecting for the frequently observed intramolecular recombinations and deletions. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

11.

Background

Naked DNA and standard vectors have previously been used for gene delivery from implantable carrier matrices with great potential for gene therapeutic assistance of wound healing or tissue engineering. We have previously developed copolymer‐protected gene vectors which are inert towards opsonization. Here we examine their potency in carrier‐mediated gene delivery in comparison to standard vectors using a vector‐loaded collagen sponge model.

Methods

Equine collagen type I sponges were loaded by a lyophilization method with naked DNA, polyethylenimine (PEI)‐DNA, DOTAP/cholesterol‐DNA and copolymer‐protected PEI‐DNA. These preparations were characterized in terms of vector‐release, cell growth on the matrices and reporter gene expression by cells colonizing the sponges in vitro and in vivo. Subcutaneous implantation of sponges in rats served as an in vivo model.

Results

At the chosen low vector dose, the loading efficiency was at least 86%. Naked DNA‐loaded collagen matrices lost 77% of the DNA dose in an initial burst in aqueous buffer in vitro. The other preparations examined displayed a sustained vector release. There was no difference in cell growth and invasion of the sponges between vector‐loaded and untreated collagen grafts. Reporter gene expression from cells colonizing the sponges in vitro was observed for not more than 7 days with naked DNA, whereas the lipoplex and polyplex preparations yielded long‐term expression throughout the experimental period of up to 56 days. The highest expression levels were achieved with the PEI‐DNA‐PROCOP (protective copolymer) formulation. Upon subcutaneous implantation in rats, no luciferase expression was detected with naked DNA preparations. DOTAP/cholesterol‐DNA and PEI‐DNA‐loaded implants lead to reporter gene expression for at least 3 days, but with poor reproducibility. PEI‐DNA‐PROCOP collagen matrices yielded consistently the highest reporter gene expression levels for at least 7 days with good reproducibility.

Conclusions

With the preparation method chosen, lipoplex‐ and polyplex‐loaded collagen sponges are superior in mediating sustained gene delivery in vitro and local transfection in vivo as compared to naked DNA‐loaded sponges. Protective copolymers are particularly advantageous in promoting the tranfection capacity of polyplex‐loaded sponges upon subcutaneous implantation, likely due to their stabilizing and opsonization‐inhibiting properties. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

12.
13.

Background

Helper‐dependent, or gutted, adenoviruses (Ad) lack viral coding sequences, resulting in reduced immunotoxicity compared with conventional Ad vectors. Gutted Ad growth requires a conventional Ad to supply replication and packaging functions in trans. Methods that allow high‐titer growth of gutted vectors while reducing helper contamination, and which use safer helper viruses, will facilitate the use of gutted Ad vectors in vivo.

Methods

Replication‐defective helper viruses were generated that are deleted for Ad E1, E2b and E3 genes, but which contain loxP sites flanking the packaging signal. Complementing Ad packaging cell lines (C7‐cre cells) were also generated by transfecting 293 cells with the Ad E2b genes encoding DNA polymerase and pre‐terminal protein, and with a cre‐recombinase plasmid.

Results

We show that C7‐cre cells allow efficient production of gutted Ad using ΔE1 + ΔE2b + ΔE3 helper viruses whose growth can be limited by cre‐loxP‐mediated excision of the packaging signal. Gutted Ad vectors carrying ~28 kb cassettes expressing full‐length dystrophin were prepared at high titers, similar to those obtained with E2b+ helpers, with a resulting helper contamination of <1%.

Conclusions

These new packaging cell lines and helper viruses offer several significant advantages for gutted Ad vector production. They allow gutted virus amplification using a reduced number of passages, which should reduce the chances of selecting rearranged products. Furthermore, the residual helper contamination in gutted vector preparations should be less able to elicit immunological reactions upon delivery to tissues, since E2b‐deleted vectors display a profound reduction in viral gene expression. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

14.

Background

The pig lung, given its gross anatomical, histological and physiological similarities to the human lung, may be useful as a large animal model, in addition to rodents, in which to assess the potential of vectors for pulmonary airway gene transfer. The aim of this study was to assess the utility of the pig lung as a model of gene transfer to the human lung with a synthetic vector system.

Methods

The LID vector system consists of a complex of lipofectin (L), integrin‐binding peptide (I) and plasmid DNA (D). LID complexes containing a β‐galactosidase reporter gene under a CMV promoter or a control plasmid at1 mg/3 ml PBS, or 3 ml buffer, was administered to the right lower lobe ofthe pig lung through a bronchoscope. Pigs were culled at 48 h and lung sections prepared for immunohistochemical and histological analysis. Bronchoalveolar lavage fluid was collected and analysed for TNF‐α by ELISA.

Results

Immunohistochemical staining for the β‐galactosidase reporter gene indicated high efficiency of gene transfer by the LID vector to pig bronchial epithelium with 46% of large bronchi staining positively. There was no evidence for vector‐specific inflammation assessed by leukocytosis and cytokine production.

Conclusions

This study demonstrates the use of the pig for studies of gene transfer in the lung and confirms in a second species the potential of the LID vector for gene therapy of pulmonary diseases such as cystic fibrosis. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

15.

Background

Gene therapy strategies for the treatment of vascular disease such as the prevention of post‐angioplasty restenosis require efficient, non‐toxic transfection of vascular cells. In vitro studies in these cells contribute to vector development for in vivo use and for the evaluation of genes with therapeutic potential. The aim of this project was to evaluate a novel synthetic vector consisting of a liposome (L), an integrin targeting peptide (I), and plasmid DNA (D), which combine to form the LID vector complex.

Methods

Cultures of porcine smooth muscle cells and endothelial cells were established and then transfected with the LID vector, using the reporter genes luciferase and green fluorescent protein and the metalloprotease inhibitor TIMP‐1.

Results

The LID vector system transfected primary porcine vascular smooth muscle cells and porcine aortic endothelial cells with efficiency levels of 40% and 35%, respectively. By increasing the relative DNA concentration four‐fold, incubation periods as short as 30 min achieved the same levels of luciferase transgene expression as 4 h incubations at lower DNA concentrations. The transfection did not affect cell viability as measured by their proliferative potential. Serum levels of up to 20% in the transfection medium had no adverse affect on the efficiency of transfer and gene expression in either cell type. Transfections with the cDNA for TIMP‐1 produced protein levels that peaked at 130 ng/ml per 24 h and persisted for 14 days at 10 ng/ml per 24 h.

Conclusion

This novel vector system has potential for studies involving gene transfer to cardiovascular cells in vitro and in vivo. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

16.

Background

Despite improvements in the treatment of osteosarcoma (OS) there are still too many patients who cannot benefit from current treatment modalities. Therefore, new therapeutic approaches are warranted. Here we explore the efficacy of targeted adenoviral based suicide gene therapy.

Methods and results

Immunohistochemistry and FACS analysis detected low or absent expression levels of the primary adenovirus receptor CAR on human primary OS and human OS cell lines. These results predict a low infection efficiency and thus a reduced therapeutic effect. Targeting the adenoviruses to another receptor highly expressed on OS could overcome this limitation. We found epidermal growth factor receptor (EGFR) to be widely expressed on primary OS. Immunohistochemistry on primary tumor samples and FACS analysis on primary short‐term cultures and four OS cell lines showed that EGFR was consistently expressed. The recombinant bispecific single‐chain antibody 425‐s11 redirects adenoviral vectors towards the EGFR. Adenovirus transduction experiments in the presence or absence of 425‐s11 showed significantly enhanced gene transfer with the targeted adenoviral vector compared with the native vector (OS cell lines 2.5 to 7.2 times enhanced gene transfer and OS primary short term cultures 1.7 to 10 times enhanced gene transfer). On this basis, targeted suicide gene therapy experiments with AdCMVHSV‐TK in combination with ganciclovir were performed. These experiments demonstrated up to 3.5‐fold enhanced kill of OS cell lines and primary short‐term cultures by the EGFR targeted vector.

Conclusions

Suicide gene therapy with adenovirus targeted towards EGFR may have favorable therapeutic characteristics for future gene therapy applications in OS. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

17.
18.

Background

Dry powder dispersion devices offer potential for delivering therapeutic macromolecules to the pulmonary epithelia. Previously, freeze‐drying (lyophilisation) has been the accepted method for preparing dried formulations of proteins and non‐viral gene vectors despite the respirability of such powders being inadequate without further processing. In this study we compare the utility of freeze‐drying and spray‐drying, a one‐step process for producing dry and respirable powders, as methods for preparing non‐viral respiratory gene delivery systems.

Methods

Lipid:polycation:pDNA (LPD) vectors comprising 1,2‐dioleoyl‐3‐trimethylammoniumpropane (DOTAP), protamine sulphate and pEGFP‐N1 in 3% lactose solution were either snap‐frozen and lyophilised or spray‐dried. Lyophilised powder was used as recovered or following coarse grinding. Structural integrity of dehydrated pDNA was assessed by agarose gel electrophoresis and powder particle size determined by laser diffraction. The apparent structure of the systems was visualised by scanning and transmission electron microscopy with the biological functionality quantified in vitro (A549 human lung epithelial cell line) by Green Fluorescent Protein (GFP) associated fluorescence.

Results

Lyophilisation produced large, irregularly shaped particles prior to (mean diameter ~21 µm) and following (mean diameter ~18 µm) coarse grinding. Spray‐drying produced uniformly shaped spherical particles (mean diameter ~4 µm). All dehydrated formulations mediated reporter gene expression in A549 cells with the spray‐dried formulation generally proving superior even when compared with freshly prepared LPD complexes. Biological functionality of the LPD dry powders was not adversely affected following 3 months storage.

Conclusions

Spray‐drying has utility for producing stable, efficient and potentially respirable non‐viral dry powder systems for respiratory gene delivery. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

19.

Background

Gene therapy has been used to treat a variety of health problems, but transfection inefficiency and the lack of safe vectors have limited clinical progress. Fabrication of a vector that is safe and has high transfection efficiency is crucial for the development of successful gene therapy. The present study aimed to synthesize chitosan‐alginate nanoparticles that can be used as carriers of the pAcGFP1‐C1 plasmid and to use these nanoparticles with an ultrasound protocol to achieve high efficiency gene transfection.

Methods

Chitosan was complexed with alginate and the pAcGFP1‐C1 plasmid at different charge ratios to create chitosan‐alginate‐DNA nanoparticles (CADNs). The average particle size and loading efficiency were measured. Plasmid DNA retardation and integrity were analysed on 1% agarose gels. The effect of CADNs and ultrasound on the efficiency of transfection of cells and subcutaneous tumors was evaluated.

Results

In the CADNs, the average size of incorporated plasmid DNA was 600–650 nm and the loading efficiency was greater than 90%. On the basis of the results of the plasmid DNA protection test, CADNs could protect the transgene from DNase I degradation. The transgene product expression could be enhanced efficiently if cells or tumor tissues were first given CADNs and then treated with ultrasound.

Conclusions

The use of CADNs combined with an ultrasound regimen is a promising method for safe and effective gene therapy. Copyright © 2009 John Wiley & Sons, Ltd.
  相似文献   

20.

Background

Pancreatic cancer is one of the most aggressive human tumors and the development of new therapeutic approaches is particularly urgent since current therapies are not effective. The use of pro‐drug‐activating genes is a possible approach for cancer gene therapy.

Methods

The present study evaluated the efficiency of the cytochrome P4502B1 (CYP2B1) suicide gene that encodes the enzyme responsible for activating the pro‐drug cyclophosphamide (CPA), in pancreatic tumor cells invitro and in vivo. The effects on tumor growth of the combination of two suicide systems, CYP2B1/CPA and herpes simplex virus thymidine kinase gene/ganciclovir (HSVtk/GCV), were also studied.

Results

Retroviral CYP2B1 transfer followed by CPA treatment highly sensitized pancreatic tumor cells NP‐9, NP‐18, and NP‐31, and led to stabilization of tumor growth in a pancreatic tumor model. Differences in tumor volume at the end of the treatment were statistically significant when compared with animals injected with CPA alone. The combination of both suicide systems CYP2B1/CPA and HSVtk/GCV in vitro resulted in a potentiation of the killing effect. However, no potentiation was achieved in vivo, although retardation in tumor growth was evident.

Conclusions

The results show that in situ transduction of pancreatic tumor cells with the CYP2B1 gene by retroviral vectors clearly increases the sensitivity to CPA. Moreover, they suggest that in order to achieve a potentiation on cell killing when the two suicide systems HSVtk/GCV and CYP2B1/CPA are combined, co‐expression of both genes in the same tumor cell would be necessary. Copyright © 2002 John Wiley & Sons, Ltd.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号