Nucleotide binding activity of SecA homodimer is conformationally regulated by temperature and altered by prlD and azi mutations

SecA ATPase is critical for protein translocation across the Escherichia coli inner membrane. To understand this activity further, the high affinity nucleotide binding activity of SecA was characterized. We found that at 4 degrees C SecA homodimer binds one ADP molecule with high affinity. This nucleotide binding activity was conformationally regulated by temperature: at low temperature SecA affinity for ADP was high with a slow exchange rate, whereas at high temperature the converse was true. Azi- and PrlD-SecA proteins that confer azide-resistant and signal sequence suppressor phenotypes were found to have reduced affinity for ADP and accelerated exchange rates compared with wild type SecA. Consistent with this observation, fluorescence and proteolysis studies indicated that these proteins had a conformationally relaxed state at a reduced temperature compared with SecA. The level of Azi- and PrlD-SecA protein was also elevated in inverted membrane vesicles where it displayed higher membrane ATPase activity. These results provide the first direct evidence for conformational regulation of the SecA-dependent nucleotide cycle, its alteration in azi and prlD mutants, and its relevance to in vivo protein export.     

Escherichia coli SecG Is Required for Residual Export Mediated by Mutant Signal Sequences and for SecY-SecE Complex Stability

Protein export to the bacterial periplasm is achieved by SecYEG, an inner membrane heterotrimer. SecY and SecE are encoded by essential genes, while SecG is not essential for growth under standard laboratory conditions. Using a quantitative and sensitive export assay, we show that SecG plays a critical role for the residual export mediated by mutant signal sequences; the magnitude of this effect is not proportional to the strength of the export defect. In contrast, export mediated by wild-type signal sequences is only barely retarded in the absence of SecG. When probed with mutant signal sequences, secG loss of function mutations display a phenotype opposite to that of prlA mutations in secY. The analysis of secG and prlA single and double mutant strains shows that the increased export conferred by several prlA alleles is enhanced in the absence of SecG. Several combinations of prlA alleles with a secG deletion cannot be easily constructed. This synthetic phenotype is conditional, indicating that cells can adapt to the presence of both alleles. The biochemical basis of this phenomenon is linked to the stability of the SecYE dimer in solubilized membranes. With prlA alleles that can be normally introduced in a secG deletion strain, SecG has only a limited effect on the stability of the SecYE dimer. With the other prlA alleles, the SecYE dimer can often be detected only in the presence of SecG. A possible role for the maintenance of SecG during evolution is proposed.     

Suppressor Analysis Reveals a Role for SecY in the SecA2-Dependent Protein Export Pathway of Mycobacteria

All bacteria use the conserved Sec pathway to transport proteins across the cytoplasmic membrane, with the SecA ATPase playing a central role in the process. Mycobacteria are part of a small group of bacteria that have two SecA proteins: the canonical SecA (SecA1) and a second, specialized SecA (SecA2). The SecA2-dependent pathway exports a small subset of proteins and is required for Mycobacterium tuberculosis virulence. The mechanism by which SecA2 drives export of proteins across the cytoplasmic membrane remains poorly understood. Here we performed suppressor analysis on a dominant negative secA2 mutant (secA2 K129R) of the model mycobacterium Mycobacterium smegmatis to better understand the pathway used by SecA2 to export proteins. Two extragenic suppressor mutations were identified as mapping to the promoter region of secY, which encodes the central component of the canonical Sec export channel. These suppressor mutations increased secY expression, and this effect was sufficient to alleviate the secA2 K129R phenotype. We also discovered that the level of SecY protein was greatly diminished in the secA2 K129R mutant, but at least partially restored in the suppressors. Furthermore, the level of SecY in a suppressor strongly correlated with the degree of suppression. Our findings reveal a detrimental effect of SecA2 K129R on SecY, arguing for an integrated system in which SecA2 works with SecY and the canonical Sec translocase to export proteins.     

The filamentous bacteriophage assembly proteins require the bacterial SecA protein for correct localization to the membrane.

The noncapsid assembly proteins pI and pI of the filamentous bacteriophage f1 are inserted into the inner membrane of Escherichia coli via an internal signal sequence. Inhibition of the activity of SecA with low concentrations of sodium azide results in rapid accumulation of pI and pI proteins in the cytoplasm. However, both proteins are inserted into the membrane under the same conditions when synthesized in bacteria containing a secA azide resistance mutation. The other noncapsid assembly protein, pIV, is an outer membrane protein synthesized with a cleavable signal sequence. Wild-type bacteria accumulate the precursor to pIV when protein synthesis is in the presence of low concentrations of sodium azide. These results suggest that the f1 bacteriophage assembly proteins require SecA and consequently the bacterial Sec system to reach their proper membrane location.     

Dropping Out and Other Fates of Transmembrane Segments Inserted by the SecA ATPase

Type II single-span membrane proteins, such as CadC or RodZ, lacking a signal sequence and having a far-downstream hydrophobic segment, require the SecA secretion motor for insertion into the inner membrane of Escherichia coli. Using two chimeric single-span proteins containing a designed hydrophobic segment H, we have determined the requirements for SecA-mediated secretion, the molecular distinction between TM domains and signal peptides, and the propensity for hydrophobic H-segments to remain embedded within the bilayer after targeting. By means of engineered H-segments and a strategically placed SPase I cleavage site, we determined how targeting and stability of the chimeric proteins are affected by the length and hydrophobicity of the H-segment. Very hydrophobic segments (e.g., 16 Leu) are stably incorporated into the inner membrane, resulting in a C-terminal anchored membrane protein, while a 24L construct was not targeted to the membrane by SecA and remained in the cytoplasm. However, a construct carrying preMalE at the N-terminus led to SecA targeting to SecYEG via the native signal sequence and stable insertion of the downstream 24L H-segment. We show that the RseP intramembrane protease degrades weakly stable H-segments and is a useful tool for investigating the borderline between stable and unstable TM segments. Using RseP⁻ cells, we find that moderately hydrophobic sequences (e.g., 5Leu + 11Ala) are targeted to SecYEG by SecA and inserted, but subsequently drop out of the membrane into the cytoplasm. Therefore, the free energy of transfer from translocon to bilayer is different from the transfer free energy from membrane to water.     

Characterization of the Escherichia coli SecA signal peptide-binding site

SecA signal peptide interaction is critical for initiating protein translocation in the bacterial Sec-dependent pathway. Here, we have utilized the recent nuclear magnetic resonance (NMR) and Förster resonance energy transfer studies that mapped the location of the SecA signal peptide-binding site to design and isolate signal peptide-binding-defective secA mutants. Biochemical characterization of the mutant SecA proteins showed that Ser226, Val310, Ile789, Glu806, and Phe808 are important for signal peptide binding. A genetic system utilizing alkaline phosphatase secretion driven by different signal peptides was employed to demonstrate that both the PhoA and LamB signal peptides appear to recognize a common set of residues at the SecA signal peptide-binding site. A similar system containing either SecA-dependent or signal recognition particle (SRP)-dependent signal peptides along with the prlA suppressor mutation that is defective in signal peptide proofreading activity were employed to distinguish between SecA residues that are utilized more exclusively for signal peptide recognition or those that also participate in the proofreading and translocation functions of SecA. Collectively, our data allowed us to propose a model for the location of the SecA signal peptide-binding site that is more consistent with recent structural insights into this protein translocation system.     

Functional and structural characterization of the minimal Sec translocase of the hyperthermophile Thermotoga maritima

The genome of the hyperthermophilic bacterium Thermotoga maritima contains the genes that encode core subunits of the protein translocase, a complex consisting of the molecular motor SecA and the protein conducting pore SecYE. In addition, we identified an erroneous sequence in the genome encoding for a putative secG gene. The genes of the T. maritima translocase subunits were overexpressed in Escherichia coli and purified to homogeneity. T. maritima SecA showed a basal thermostable ATPase activity that was stimulated up to 4-fold by phospholipids with an optimum at 74°C. Membrane vesicles and proteoliposomes containing SecYE or SecYEG supported 2- to 4-fold stimulation of the precursor dependent SecA ATPase activity. Imaging of small two-dimensional crystals of the SecYE complex using electron microscopy showed square-shaped particles with a side-length of about 6 nm. These results demonstrate that in T. maritima a highly thermostable translocase complex is operational.     

Effect of Membrane Phospholipid Composition and Charge of the Signal Peptide of Escherichia coli Alkaline Phosphatase on Efficiency of Its Secretion

The secretion of the Escherichia coli alkaline phosphatase with a different charge of signal peptide due to replacement of positively charged Lys(–20) has been studied depending on the phospholipid composition of the membranes and the activity of the translocational ATPase—protein SecA. Changing the signal peptide charge, along with a change in phospholipid composition, has been shown to reduce the efficiency of secretion. In the absence of phosphatidylethanolamine the membrane contains anionic phospholipids only, and the dependence of secretion on the signal peptide charge decreases. The dependence of secretion on membrane phospholipid composition and the signal peptide charge is also determined by the activity of SecA protein. If SecA is inactivated by sodium azide, then the dependence of secretion on anionic phospholipids increases; on the contrary, higher content of anionic phospholipids (in the absence of phosphatidylethanolamine) decreases the dependence of secretion on the SecA activity. The results suggest a direct interaction of positively charged signal peptide with negatively charged membrane phospholipids under initiation of secretion and also interdependent contribution of the signal peptide charge, anionic phospholipids, and translocational ATPase to secretion.     

Kinetics and energetics of the translocation of maltose binding protein folding mutants

Protein translocation in Escherichia coli is mediated by the translocase that, in its minimal form, comprises a protein-conducting pore (SecYEG) and a motor protein (SecA). The SecYEG complex forms a narrow channel in the membrane that allows passage of secretory proteins (preproteins) in an unfolded state only. It has been suggested that the SecA requirement for translocation depends on the folding stability of the mature preprotein domain. Here we studied the effects of the signal sequence and SecB on the folding and translocation of folding stabilizing and destabilizing mutants of the mature maltose binding protein (MBP). Although the mutations affect the folding of the precursor form of MBP, these are drastically overruled by the combined unfolding stabilization of the signal sequence and SecB. Consequently, the translocation kinetics, the energetics and the SecA and SecB dependence of the folding mutants are indistinguishable from those of wild-type preMBP. These data indicate that unfolding of the mature domain of preMBP is likely not a rate-determining step in translocation when the protein is targeted to the translocase via SecB.     

Suppressor mutations that restore export of a protein with a defective signal sequence

A selection procedure is described that should allow the genetic identification of cellular components involved in the process of protein localization in Escherichia coli. This procedure makes use of mutations that alter the signal sequence of the λ receptor protein (product of the lamB gene), and prevent export of this protein to its normal outer membrane location. Several suppressor mutations have been identified that restore export of the mutant λ receptor protein. Mapping experiments show that the suppressor phenotype is the result of mutations in any of at least three different chromosomal loci. One class of suppressor mutations, the class containing the largest number of independent isolates, maps in the major ribosomal gene cluster, suggesting that the suppressor phenotype is the consequence of an altered ribosomal protein. This class of suppressors phenotypically suppresses all known export-defective mutations, internal to the signal sequence region of the lamB gene. These results suggest that ribosomes play an important role in the export of λ receptor to the outer membrane.     

Additional in vitro and in vivo evidence for SecA functioning as dimers in the membrane: dissociation into monomers is not essential for protein translocation in Escherichia coli

SecA is an essential component in the Sec-dependent protein translocation pathway and, together with ATP, provides the driving force for the transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. Previous studies established that SecA undergoes monomer-dimer equilibrium in solution. However, the oligomeric state of functional SecA during the protein translocation process is controversial. In this study, we provide additional evidence that SecA functions as a dimer in the membrane by (i) demonstration of the capability of the presumably monomeric SecA derivative to be cross-linked as dimers in vitro and in vivo, (ii) complementation of the growth of a secA(Ts) mutant with another nonfunctional SecA or (iii) in vivo complementation and in vitro function of a genetically tandem SecA dimer that does not dissociate into monomers, and (iv) formation of similar ring-like structures by the tandem SecA dimer and SecA in the presence of lipid bilayers. We conclude that SecA functions as a dimer in the membrane and dissociation into monomers is not necessary during protein translocation.     

Signal Recognition Particle and SecA Cooperate during Export of Secretory Proteins with Highly Hydrophobic Signal Sequences

The Sec translocon of bacterial plasma membranes mediates the linear translocation of secretory proteins as well as the lateral integration of membrane proteins. Integration of many membrane proteins occurs co-translationally via the signal recognition particle (SRP)-dependent targeting of ribosome-associated nascent chains to the Sec translocon. In contrast, translocation of classical secretory proteins across the Sec translocon is a post-translational event requiring no SRP but the motor protein SecA. Secretory proteins were, however, reported to utilize SRP in addition to SecA, if the hydrophobicity of their signal sequences exceeds a certain threshold value. Here we have analyzed transport of this subgroup of secretory proteins across the Sec translocon employing an entirely defined in vitro system. We thus found SecA to be both necessary and sufficient for translocation of secretory proteins with hydrophobic signal sequences, whereas SRP and its receptor improved translocation efficiency. This SRP-mediated boost of translocation is likely due to the early capture of the hydrophobic signal sequence by SRP as revealed by site-specific photo cross-linking of ribosome nascent chain complexes.     

Two distinct anionic phospholipid-dependent events involved in SecA-mediated protein translocation

Protein translocation across the bacterial cytoplasmic membrane is an essential process catalyzed by the Sec translocase, which in its minimal form consists of the protein-conducting channel SecYEG, and the motor ATPase SecA. SecA binds via its positively charged N-terminus to membranes containing anionic phospholipids, leading to a lipid-bound intermediate. This interaction induces a conformational change in SecA, resulting in a high-affinity association with SecYEG, which initiates protein translocation. Here, we examined the effect of anionic lipids on the SecA-SecYEG interaction in more detail, and discovered a second, yet unknown, anionic lipid-dependent event that stimulates protein translocation. Based on molecular dynamics simulations we identified an anionic lipid-enriched region in vicinity of the lateral gate of SecY. Here, the anionic lipid headgroup accesses the lateral gate, thereby stabilizing the pre-open state of the channel. The simulations suggest flip-flop movement of phospholipid along the lateral gate. Electrostatic contribution of the anionic phospholipids at the lateral gate may directly stabilize positively charged residues of the signal sequence of an incoming preprotein. Such a mechanism allows for the correct positioning of the entrant peptide, thereby providing a long-sought explanation for the role of anionic lipids in signal sequence folding during protein translocation.     

Characterization of a Bacillus subtilis SecA mutant protein deficient in translocation ATPase and release from the membrane

SecA is the precursor protein binding subunit of the bacterial precursor protein translocase, which consists of the SecY/E protein as integral membrane domain. SecA is an ATPase, and couples the hydrolysis of ATP to the release of bound precursor proteins to allow their proton-motive-force-driven translocation across the cytoplasmic membrane. A putative ATP-binding motif can be predicted from the amino acid sequence of SecA with homology to the consensus Walker A-type motif. The role of this domain is not known. A lysine residue at position 106 at the end of the glycine-rich loop in the A motif of the Bacillus subtilis SecA was replaced by an asparagine through site-directed mutagenesis (K106N SecA). A similar replacement was introduced at an adjacent lysine residue at position 101 (K101N SecA). Wild-type and mutant SecA proteins were expressed to a high level and purified to homogeneity. The catalytic efficacy (k_cat/k_m) of the K106N SecA for lipid-stimulated ATP hydrolysis was only 1% of that of the wild-type and K101N SecA. K106N SecA retained the ability to bind ATP, but its ATPase activity was not stimulated by precursor proteins. Mutant and wild-type SecA bind with similar affinity to Escherichia coli inner membrane vesicles and insert into a phospholipid mono-layer, in contrast to the wild type, membrane insertion of the K106N SecA was not prevented by ATP. K106N SecA blocks the ATP and proton-motive-force-dependent chase of a translocation intermediate to fully translocated proOmpA. It is concluded that the GKT motif in the amino-terminal domain of SecA is part of the catalytic ATP-binding site. This site may be involved in the ATP-driven protein recycling function of SecA which allows the release of SecA from its association with precursor proteins, and the phospholipid bilayer.     

The variable subdomain of Escherichia coli SecA functions to regulate SecA ATPase activity and ADP release

Bacterial SecA proteins can be categorized by the presence or absence of a variable subdomain (VAR) located within nucleotide-binding domain II of the SecA DEAD motor. Here we show that VAR is dispensable for SecA function, since the VAR deletion mutant secAΔ519-547 displayed a wild-type rate of cellular growth and protein export. Loss or gain of VAR is extremely rare in the history of bacterial evolution, indicating that it appears to contribute to secA function within the relevant species in their natural environments. VAR removal also results in additional secA phenotypes: azide resistance (Azi(r)) and suppression of signal sequence defects (PrlD). The SecAΔ(519-547) protein was found to be modestly hyperactive for SecA ATPase activities and displayed an accelerated rate of ADP release, consistent with the biochemical basis of azide resistance. Based on our findings, we discuss models whereby VAR allosterically regulates SecA DEAD motor function at SecYEG.     

Synthetic Effects of secG and secY2 Mutations on Exoproteome Biogenesis in Staphylococcus aureus

The Gram-positive pathogen Staphylococcus aureus secretes various proteins into its extracellular milieu. Bioinformatics analyses have indicated that most of these proteins are directed to the canonical Sec pathway, which consists of the translocation motor SecA and a membrane-embedded channel composed of the SecY, SecE, and SecG proteins. In addition, S. aureus contains an accessory Sec2 pathway involving the SecA2 and SecY2 proteins. Here, we have addressed the roles of the nonessential channel components SecG and SecY2 in the biogenesis of the extracellular proteome of S. aureus. The results show that SecG is of major importance for protein secretion by S. aureus. Specifically, the extracellular accumulation of nine abundant exoproteins and seven cell wall-bound proteins was significantly affected in an secG mutant. No secretion defects were detected for strains with a secY2 single mutation. However, deletion of secY2 exacerbated the secretion defects of secG mutants, affecting the extracellular accumulation of one additional exoprotein and one cell wall protein. Furthermore, an secG secY2 double mutant displayed a synthetic growth defect. This might relate to a slightly elevated expression of sraP, encoding the only known substrate for the Sec2 pathway, in cells lacking SecG. Additionally, the results suggest that SecY2 can interact with the Sec1 channel, which would be consistent with the presence of a single set of secE and secG genes in S. aureus.Staphylococcus aureus is a well-represented component of the human microbiota as nasal carriage of this Gram-positive bacterium has been shown for 30 to 40% of the population (32). This organism can, however, turn into a dangerous pathogen that is able to infect almost every tissue in the human body. S. aureus has become particularly notorious for its high potential to develop resistance against commonly used antibiotics (20, 49). Accordingly, the S. aureus genome encodes an arsenal of virulence factors that can be expressed when needed at different stages of growth. These include surface proteins and invasins that are necessary for colonization of host tissues, surface-exposed factors for evasion of the immune system, exotoxins for the subversion of protective host barriers, and resistance proteins for protection against antimicrobial agents (37, 57).Most proteinaceous virulence factors of S. aureus are synthesized as precursors with an N-terminal signal peptide to direct their transport from the cytoplasm across the membrane to an extracytoplasmic location, such as the cell wall or the extracellular milieu (38, 45). As shown for various Gram-positive bacteria, the signal peptides of S. aureus are generally longer and more hydrophobic than those of Gram-negative bacteria (38, 54). On the basis of signal peptide predictions using a variety of algorithms, it is believed that most exoproteins of S. aureus are exported to extracytoplasmic locations via the general secretory (Sec) pathway (38). This seems to involve precursor targeting to the Sec machinery via the signal recognition particle instead of the well-characterized proteobacterial chaperone SecB, which is absent from Gram-positive bacteria (16, 19, 53). The preproteins are then bound by the translocation motor protein SecA (38, 45). Through repeated cycles of ATP binding and hydrolysis, SecA pushes the protein in an unfolded state through the membrane-embedded SecYEG translocation channel (12, 30, 33, 52). Upon initiation of the translocation process, the proton motive force is thought to accelerate preprotein translocation through the Sec channel (26). Recently, the structure of the SecA/SecYEG complex from the Gram-negative bacterium Thermotoga maritima was solved at 4.5 Å resolution (58). In this structure, one SecA molecule is bound to one set of SecYEG channel proteins. The core of the Sec translocon consists of the SecA, SecY, and SecE proteins, which are essential for growth and viability of bacteria, such as Escherichia coli and Bacillus subtilis (6, 9, 22). In contrast, the channel component SecG is dispensable for growth, cell viability, and protein translocation (26, 48). Nevertheless, SecG does enhance the efficiency of preprotein translocation through the SecYE channel (26, 48). This is of particular relevance at low temperatures and in the absence of a proton motive force (17). Several studies suggest that E. coli SecG undergoes topology inversion during preprotein translocation (25, 27, 43). Even so, van der Sluis et al. reported that SecG cross-linked to SecY is fully functional despite its fixed topology (46). During or shortly after membrane translocation of a preprotein through the Sec channel, the signal peptide is removed by signal peptidase. This is a prerequisite for the release of the translocated protein from the membrane (1, 47).Several pathogens, including Streptococcus gordonii, Streptococcus pneumoniae, Bacillus anthracis, Bacillus cereus, and S. aureus, contain a second set of chromosomal secA and secY genes named secA2 and secY2, respectively (39). Comparison of the amino acid sequences of the SecY1 and SecY2 proteins shows that their similarity is low (about 20% identity) and that the conserved regions are mainly restricted to the membrane-spanning domains. It has been shown for S. gordonii that the transport of at least one protein is dependent on the presence of SecA2 and SecY2. This protein, GspB, is a large cell surface glycoprotein that is involved in platelet binding (4). The protein contains an unusually long N-terminal signal peptide of 90 amino acids, large serine-rich repeats, and a C-terminal LPXTG motif for covalent cell wall binding. The gspB gene is located in a gene cluster with the secA2 and secY2 genes. Two other genes in this cluster encode the glycosylation proteins GftA and GftB, which seem to be necessary for stabilization of pre-GspB. Furthermore, the asp4 and asp5 genes in the secA2 secY2 gene cluster show similarity to secE and secG, and they are important for GspB export by S. gordonii (44). Despite this similarity, SecE and SecG cannot complement for the absence of Asp4 and Asp5, respectively. The secA2-secY2 gene cluster is also present in S. aureus, but homologues of the asp4 and asp5 genes are lacking. This seems to suggest that SecA2 and SecY2 of S. aureus share the SecE and SecG proteins with SecA1 and SecY1. The sraP gene in the secA2-secY2 gene cluster of S. aureus encodes a protein with features similar to those described for GspB. Siboo and colleagues (41) have shown that SraP is glycosylated and capable of binding to platelets. Importantly, the disruption of sraP resulted in a decreased ability to initiate infective endocarditis in a rabbit model. Consistent with the findings in S. gordonii, SraP export was shown to depend on SecA2/SecY2 (40). However, it has remained unclear whether other S. aureus proteins are also translocated across the membrane in an SecA2/SecY2-dependent manner.The present studies were aimed at defining the roles of two Sec channel components, SecG and SecY2, in the biogenesis of the S. aureus exoproteome. The results show that secG and secY2 are not essential for growth and viability of S. aureus. While the absence of SecY2 by itself had no detectable effect, the absence of SecG had a profound impact on the composition of the exoproteome of S. aureus. Various extracellular proteins were present in decreased amounts in the growth medium of secG mutant strains, which is consistent with impaired Sec channel function. However, a few proteins were present in increased amounts. Furthermore, the absence of secG caused a serious decrease in the amounts of the cell wall-bound Sbi protein. Most notable, a secG secY2 double mutant strain displayed synthetic growth and secretion defects.     

An outer membrane protein (OmpA) of Escherichia coli can be translocated across the cytoplasmic membrane of Bacillus subtllis

The translocation of secretory proteins derived from a Gram-positive (Staphylococcus hyicus prolipase) or a Gram-negative (Escherichia coli pre-OmpA protein) bacterium across the cytoplasmic membrane was studied in E. coli and Bacillus subtilis. in both microorganisms, the prolipase was found to be secreted across the plasma membrane when either the pre-prolipase signal peptide (38 amino acids in length) or the pre-OmpA signal peptide (21 amino acids in length) was used. Expression of the gene encoding the authentic pre-OmpA protein in B. subtilis resulted in the translocation of mature OmpA protein across the plasma membrane. Processing of the OmpA precursor in B. subtilis required the electrochemical potential and was sensitive to sodium azide, suggesting that the B. subtilis SecA homologue was involved in the translocation process. The mature OmpA protein, which was most likely present in an aggregated state, was fully accessible to proteases in protoplasted cells. Therefore, our results clearly demonstrate that an outer membrane protein can be secreted by B. subtilis, supporting the notion that the basic mechanism of protein translocation is highly conserved in Gram-positive and Gram-negative bacteria.     

A single amino acid substitution in SecY stabilizes the interaction with SecA.

The SecYEG complex constitutes a protein conducting channel across the bacterial cytoplasmic membrane. It binds the peripheral ATPase SecA to form the translocase. When isoleucine 278 in transmembrane segment 7 of the SecY subunit was replaced by a unique cysteine, SecYEG supported an increased preprotein translocation and SecA translocation ATPase activity, and allowed translocation of a preprotein with a defective signal sequence. SecY(I278C)EG binds SecA with a higher affinity than normal SecYEG, in particular in the presence of ATP. The increased translocation activity of SecY(I278C)EG was confirmed in a purified system consisting of SecYEG proteoliposomes, while immunoprecipitation in detergent solution reveal that translocase-preprotein complexes are more stable with SecY(I278C) than with normal SecY. These data imply an important role for SecY transmembrane segment 7 in SecA binding. As improved SecA binding to SecY was also observed with the prlA4 suppressor mutation, it may be a general mechanism underlying signal sequence suppression.     

The dispensability and requirement of SecA N-terminal aminoacyl residues for complementation,membrane binding,lipid-specific domains and channel activities

SecA is an essential multifunctional protein for the translocation of proteins across bacterial membranes. Though SecA is known to function in the membrane, the detailed mechanism for this process remains unclear. In this study we constructed a series of SecA N-terminal deletions and identified two specific domains crucial for initial SecA/membrane interactions. The first small helix, the linker and part of the second helix (Δ2-22) were found to be dispensable for SecA activity in complementing the growth of a SecA ts mutant. However, deletions of N-terminal aminoacyl residues 23–25 resulted in severe progressive retardation of growth. Moreover, a decrease of SecA activity caused by N-terminal deletions correlated to the loss of SecA membrane binding, formation of lipid-specific domains and channel activity. All together, the results indicate that the N-terminal aminoacyl residues 23–25 play a critical role for SecA binding to membranes and that the N-terminal limit of SecA for activity is at the 25th amino acid.     

SRP-dependent co-translational targeting and SecA-dependent translocation analyzed as individual steps in the export of a bacterial protein

Recently it has been recognized that the signal recognition particle (SRP) of Escherichia coli represents a specific targeting device for hydrophobic inner membrane proteins. It has remained unclear, however, whether the bacterial SRP functions in concert with SecA, which is required for the translocation of secretory proteins across the inner membrane. Here, we have analyzed a hybrid protein constructed by fusing the signal anchor sequence of an SRP-dependent inner membrane protein (MtlA) to the mature part of an exclusively SecA-requiring secretory protein (OmpA). We show that the signal anchor sequence of MtlA confers the novel properties onto nascent chains of OmpA of being co-translationally recognized and targeted to SecY by SRP. Once targeted to SecY, ribosome-associated nascent chains of the hybrid protein, however, remain untranslocated unless SecA is present. These results indicate that SRP and SecA cooperate in a sequential, non-overlapping manner in the topogenesis of those membrane proteins which, in addition to a signal anchor sequence, harbor a substantial hydrophilic domain to be translocated into the periplasm.