An Alternative Method to Facilitate cDNA Cloning for Expression Studies in Mammalian Cells by Introducing Positive Blue White Selection in Vaccinia Topoisomerase I-Mediated Recombination

One of the most basic techniques in biomedical research is cDNA cloning for expression studies in mammalian cells. Vaccinia topoisomerase I-mediated cloning (TOPO cloning by Invitrogen) allows fast and efficient recombination of PCR-amplified DNAs. Among TOPO vectors, a pcDNA3.1 directional cloning vector is particularly convenient, since it can be used for expression analysis immediately after cloning. However, I found that the cloning efficiency was reduced when RT-PCR products were used as inserts (about one-quarter). Since TOPO vectors accept any PCR products, contaminating fragments in the insert DNA create negative clones. Therefore, I designed a new mammalian expression vector enabling positive blue white selection in Vaccinia topoisomerase I–mediated cloning. The method utilized a short nontoxic LacZα peptide as a linker for GFP fusion. When cDNAs were properly inserted into the vector, minimal expression of the fusion proteins in E. coli (harboring lacZΔM15) resulted in formation of blue colonies on X-gal plates. This method improved both cloning efficiency (75%) and directional cloning (99%) by distinguishing some of the negative clones having non-cording sequences, since these inserts often disturbed translation of lacZα. Recombinant plasmids were directly applied to expression studies using GFP as a reporter. Utilization of the P2A peptide allowed for separate expression of GFP. In addition, the preparation of Vaccinia topoisomerase I-linked vectors was streamlined, which consisted of successive enzymatic reactions with a single precipitation step, completing in 3 hr. The arrangement of unique restriction sites enabled further modification of vector components for specific applications. This system provides an alternative method for cDNA cloning and expression in mammalian cells.     

Rapid and efficient cosmid cloning

We present a procedure for cosmid cloning that allows rapid and efficient cloning of individual DNA fragments of between 32kb and 45kb. By appropriate treatment of the cloning vector, pJb8, we make left-hand and right-hand vector ends that are incapable of self-ligation but which accept dephosporylated insert DNA fragments. The inserted fragments are generated by partial digestion with MboI or Sau3A and are dephosphorylated to prevent ligation and insertion of non-contiguous fragments. The method eliminates the need to size the insert DNA fragments and prevents formation of clones containing short or multiple inserts. 1 microgram of target Drosophila DNA gives about 5 x 10(5) clones, with an average insert size of 38kb. We also describe a rapid and efficient method for preparing plasmid and cosmid DNA.     

Balanced-size and long-size cloning of full-length, cap-trapped cDNAs into vectors of the novel lambda-FLC family allows enhanced gene discovery rate and functional analysis.

We have developed a new class of cloning vectors: lambda-full-length cDNA (lambda-FLC) cloning vectors. These vectors can be bulk-excised for preparing full-length cDNA libraries in which a high proportion of the plasmids carry large inserts that can be transferred into other (for example, functional) vectors. Unlike other cloning vectors, lambda-FLC vectors accommodate a broad range of sizes of eukaryotic cDNA inserts because they contain "size balancers." Further, the main protocol we use for direct bulk excision of plasmids is mediated by a Cre-lox system and is apparently free of size bias. The average size of the inserts from excised plasmid cDNA libraries was 2.9 kb for standard and 6.9 kb for size-selected cDNA. The average insert size of the full-length cDNA libraries was correlated to the rate of new gene discovery, suggesting that effectively cloning rarely expressed mRNAs requires vectors that can accommodate large inserts from a variety of sources. Part of the vectors are also suitable for bulk transfer of inserts into various functional vectors.     

Phage lambda cDNA cloning vectors for subtractive hybridization, fusion-protein synthesis and Cre-loxP automatic plasmid subcloning

We describe the construction and use of two classes of cDNA cloning vectors. The first class comprises the lambda EXLX(+) and lambda EXLX(-) vectors that can be used for the expression in Escherichia coli of proteins encoded by cDNA inserts. This is achieved by the fusion of cDNA open reading frames to the T7 gene 10 promoter and protein-coding sequences. The second class, the lambda SHLX vectors, allows the generation of large amounts of single-stranded DNA or synthetic cRNA that can be used in subtractive hybridization procedures. Both classes of vectors are designed to allow directional cDNA cloning with non-enzymatic protection of internal restriction sites. In addition, they are designed to facilitate conversion from phage lambda to plasmid clones using a genetic method based on the bacteriophage P1 site-specific recombination system; we refer to this as automatic Cre-loxP plasmid subcloning. The phage lambda arms, lambda LOX, used in the construction of these vectors have unique restriction sites positioned between the two loxP sites. Insertion of a specialized plasmid between these sites will convert it into a phage lambda cDNA cloning vector with automatic plasmid subcloning capability.     

Cloning and stable maintenance of DNA fragments over 300 kb in Escherichia coli with conventional plasmid-based vectors.

Bacterial artificial chromosome (BAC) and P1-derived artificial chromosome (PAC) systems were previously developed for cloning of very large eukaryotic DNA fragments in bacteria. We report the feasibility of cloning very large fragments of eukaryotic DNA in bacteria using conventional plasmid-based vectors. One conventional plasmid vector (pGEM11), one conventional binary plasmid vector (pSLJ1711) and one conventional binary cosmid vector (pCLD04541) were investigated using the widely used BAC (pBeloBAC11 and pECBAC1) and BIBAC (BIBAC2) vectors as controls. The plasmid vector pGEM11 yielded clones ranging in insert sizes from 40 to 100 kb, whereas the two binary vectors pCLD04541 and pSLJ1711 yielded clones ranging in insert sizes from 40 to 310 kb. Analysis of the pCLD04541 and pSLJ1711 clones indicated that they had insert sizes and stabilities similar to the BACs and BIBACs. Our findings indicate that conventional plasmid-based vectors are capable of cloning and stably maintaining DNA fragments as large as BACs and PACs in bacteria. These results suggest that many existing plasmid-based vectors, including plant and animal transformation and expression binary vectors, could be directly used for cloning of very large eukaryotic DNA fragments. The pCLD04541 and pSLJ1711 clones were shown to be present at at least 4-5 copies/cell. The high stability of these clones indicates that stability of clones does not seem contingent on single-copy status. The insert sizes and the copy numbers of the pCLD04541 and pSLJ1711 clones indicate that Escherichia coli can stably maintain at least 1200 kb of foreign DNA per cell. These results provide a new conceptual and theoretical basis for development of improved and new vectors for large DNA fragment cloning and transformation. According to this discovery, we have established a system for large DNA fragment cloning in bacteria using the two binary vectors, with which several very large-insert DNA libraries have been developed.     

Charons 36 to 40: multi enzyme, high capacity, recombination deficient replacement vectors with polylinkers and polystuffers.

New phage lambda based cloning vectors, Charons 36-40, have been constructed which allow cloning of large (up to 24 kb) DNA fragments with up to sixteen cloning enzymes. Several of these could not be used previously with lambda vectors. Clones produced with these vectors can be propagated under recombination deficient conditions. A novel polystuffer method has been developed that permits vector arms to be purified by simple precipitation and which allows reliable identification of clones that have reincorporated any part of the stuffer. Three of the vectors are available with amber mutations in essential genes.     

Efficient simplified cosmid cloning: construction and characterization of cosmid vectors that carry the two cohesive end sites of lambda phages arrayed in tandem

We constructed a series of cosmid vectors that carry the two cohesive end sites (cos) of lambda phage, arrayed in tandem, which enabled us to clone fragments of genomic DNA of up to 50 kb without a vector background. An equimolar mixture of the left and right vector arms of equal length was prepared from the vector DNA, simply by treating the DNA sequentially with three enzymes, restriction enzyme PvuII, alkaline phosphatase, and restriction enzyme BamHI (or BglII), without purification by agarose gel electrophoresis. After phenol extraction and ethanol precipitation, the equimolar mixture of the vector arms, which carried a single cos oriented from left to right, was directly ligated with insert DNA without further manipulation. We established conditions for cosmid cloning, using two kinds of DNA fragment of 40-50 kb, prepared from mouse L cell genomic DNA, as insert DNAs, namely, three cloned BamHI fragments and Sau3AI fragments, size-selected on a sucrose density gradient. The most important parameters affecting the cloning efficiency were the quality of the insert DNA and the molar ratio of the insert and vector arms. We achieved cloning efficiencies of 3.6 X 10(6)-1.3 X 10(7) colony forming units (cfu)/micrograms of insert DNA and 1.7 X 10(5)-1.0 X 10(6) cfu/micrograms of insert DNA, using the cloned BamHI fragments and the Sau3AI fragments, respectively. We examined more than 5000 clones and found that they all contained insert DNA.     

Isolation and characterization of beta- and gamma-crystallin genes from rat genomic cosmid libraries

Two libraries, together containing about 10(6) colonies, have been constructed by cloning different size fractions of a partial Sau3A digest of rat genomic DNA in the cosmid vector pTM. Upon screening with two cDNA clones, one containing alpha A2-crystallin and one containing beta B1-crystallin sequences, 14 cosmid clones were isolated which were beta B1-crystallin-specific; none was found which contained alpha A2-crystallin sequences. The inserts of the beta B1 clones, which range from 35 to 45 kb in length, contain overlapping DNA segments covering more than 60 kb of rat genomic DNA. The composite BamHI restriction map of this region shows a single beta B1-crystallin gene, which is interrupted by several intronic sequences. Five recombinants hybridizing with two different rat lens gamma-crystallin cDNA clones were also isolated from these libraries. Four of these contain 31- to 41-kb inserts, whereas the fifth recombinant contains a 12.2-kb insert. Hybridization analysis with 5' and 3'-specific cDNA fragments indicates that altogether these inserts contain six gamma-crystallin genes, three of which are located on one insert of only 31 kb.     

A Schizosaccharomyces pombe artificial chromosome large DNA cloning system.

The feasibility of using the fission yeast, Schizosaccharomyces pombe , as a host for the propagation of cloned large fragments of human DNA has been investigated. Two acentric vector arms were utilized; these carry autonomously replicating sequences ( ars elements), selectable markers ( ura4(+) or LEU2 ) and 250 bp of S. pombe terminal telomeric repeats. All cloning was performed between the unique sites in both vector arms for the restriction endonuclease Not I. Initially the system was tested by converting six previously characterized cosmids from human chromosome 11p13 into a form that could be propagated in S.pombe as linear episomal elements of 50-60 kb in length. In all transformants analysed these cosmids were maintained intact. To test if larger fragments of human DNA could also be propagated total human DNA was digested with Not I and size fractionated by pulsed field gel electrophoresis (PFGE). Fractions of 100-1000 kb were ligated to Not I-digested vector arms and transformed into S.pombe protoplasts in the presence of lipofectin. Prototrophic ura+leu+transformants were obtained which upon examination by PFGE were found to contain additional linear chromosomes migrating at between 100 and 500 kb with a copy number of 5-10 copies/cell. Hybridization analyses revealed that these additional bands contained human DNA. Fluorescent in situ hybridization (FISH) analyses of several independent clones indicated that the inserts were derived from single loci within the human genome. These analyses clearly demonstrate that it is possible to clone large fragments of heterologous DNA in fission yeast using this S.p ombe artificial chromosome system which we have called SPARC. This vector-host system will complement the various other systems for cloning large DNA fragments.     

Construction of yeast artificial chromosome (YAC) clone banks covering three genome equivalents and isolation of YACs containing the human gene encoding tumor necrosis factor receptor β

Yeast artificial chromosome (YAC) banks covering in total about three haploid genome equivalents were constructed using a human Epstein-Barr-virus-transformed B lymphocytic cell line. Two clone banks were made: 20 000 clones with average inserts of 350 kb in the pYAC4 vector and 9850 clones with average inserts of 180 kb using vectors pJS89 and pJS91. Direct comparison of pYAC4 with pJS89 and pJS91 showed pYAC4 to be the most suitable cloning vector. Two partial banks with average insert sizes of 220 kb for human endothelial cell DNA and epithelial HEp2 cell DNA were also constructed, each covering 10% of the haploid genome. A rapid, three-step PCR screening procedure for isolation of individual YAC clones was developed and used to identify two clones encoding TNF-Rβ. These clones cover about 200 kb and have 170 kb in common. TNF-Rβ is 9.3 kb long and contains two introns within the protein-coding sequence.     

利用核定位信号筛选系统初步筛选小鼠胚胎核定位蛋白基因

在已建立的核定位信号 (nuclearlocalizationsignal,NLS)筛选系统的基础上 ,对这一系统进行了改进并对改进的系统进行了验证。将小鼠 1 1天胚胎cDNA文库插入改进后的筛选载体的多克隆位点 ,转化酵母宿主菌。然后将约 1 0 4 个酵母克隆接种于选择性平板上进行筛选 ,得到了 2 2个可在选择性培养基上生长的克隆。分析了其中 1 8个克隆的DNA序列 ,见到 1 3个克隆含有以正确读框融合的编码NLS的基因片段。取其中 3个克隆的插入片段与绿色荧光蛋白基因融合后在哺乳类细胞内表达 ,证明了其在哺乳类细胞中的核定位功能。研究证明 ,构建的核定位信号筛选系统 ,能够有效地从cDNA文库中筛选核定位蛋白的基因     

A small cosmid for efficient cloning of large DNA fragments

The production and use of the 6 kb cosmid pHC79, a derivative of pBR322, is described. It can be used for cloning of fragments cleaved by EcoRI, ClaI, BamHI (also BglII, BclI, Sau3A and MboI), SalI (also XhoI and AvaI), EcaI and PstI. Hybrid cosmids containing inserts in the size range of 40 kb are packaged in vitro and transduced with an efficiency of 5 X 10(4) - 5 X 10(5) clones/microgram of insert DNA. Prefractionation of the DNA fragments to be cloned into 40 kb sized fragments ensures the cloning of contiguous stretches of DNA. Proteins produced in vitro by the cosmid pHC79 are identical to the ones produced by its pBR322 parent.     

Directional cDNA library construction assisted by the in vitro recombination reaction

We report here a new directional cDNA library construction method using an in vitro site-specific recombination reaction, based on the integrase–excisionase system of bacteriophage λ. Preliminary experiments revealed that in vitro recombinational cloning (RC) provided important advantages over conventional ligation-assisted cloning: it eliminated restriction digestion for directional cloning, generated low levels of chimeric clones, reduced size bias and, in our hands, gave a higher cloning efficiency than conventional ligation reactions. In a cDNA cloning experiment using an in vitro synthesized long poly(A)⁺ RNA (7.8 kb), the RC gave a higher full-length cDNA clone content and about 10 times more transformants than conventional ligation-assisted cloning. Furthermore, characterization of rat brain cDNA clones yielded by the RC method showed that the frequency of cDNA clones >2 kb having internal NotI sites was ~6%, whereas these cDNAs could not be cloned at all or could be isolated only in a truncated form by conventional methods. Taken together, these results indicate that the RC method makes it possible to prepare cDNA libraries better representing the entire population of cDNAs, without sacrificing the simplicity of current conventional ligation-assisted methods.     

Digital mapping of bacterial artificial chromosomes by fluorescence in situ hybridization

The bacterial artificial chromosome (BAC) has become the most popular tool for cloning large DNA fragments. The inserts of most BAC clones average 100-200 kilobases (kb) and molecular characterization of such large DNA fragments is a major challenge. Here we report a simple and expedient technique for physical mapping of BAC inserts. Individual BAC molecules were immobilized on glass slides coated with Poly-L-lysine. The intact circular BAC molecules were visualized by fluorescence in situ hybridization using BAC DNA as a probe. The 7.4 kb BAC vector was extended to approximately 2.44 kb per micrometer. Digitally measured linear distances can be transformed into kilobases of DNA using the extension of BAC vector as a standard calibration. We mapped DNA fragments as small as 2 kb directly on circular BAC molecules. A rice BAC clone containing both tandem and dispersed repeats was analyzed using this technique. The distribution and organization of the different repeats within the BAC insert were efficiently determined. The results showed that this technique will be especially valuable for characterizing BAC clones that contain complex repetitive DNA sequences.     

Direct cloning of cDNA inserts from lambda gt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage lambda gt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for lambda gt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from lambda gt11 phage were cloned directly into the pBR322 plasmid vector, bypassing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage lambda vectors when bacteria containing endogenous pBR322 are used as host cells.     

Multi-gene gateway clone design for expression of multiple heterologous genes in living cells: modular construction of multiple cDNA expression elements using recombinant cloning

Much attention has been focused on manipulating multiple genes in living cells for analyzing protein function. In order to perform high-throughput generation of multi-gene expression clones, gateway cloning technology (which represents a high-throughput DNA transfer from vector to vector) can be anticipated. In the conventional strategy for gateway cloning, the construction of two or more expression elements into tandem elements on a single plasmid requires the recombination of multiple entry clones with a destination vector in a single reaction mixture. Use of increasing numbers of entry clones in a single reaction is inefficient due to the difficulty in successfully recognizing multiple pairs of matched att signals simultaneously. To address this problem, a "Modular Destination" vector has been devised and constructed, whereby cDNA inserts are sequentially introduced, resulting in a tandem structure with multiple inserts. Whereas the standard destination vector contains only Cm(R) and ccdB genes flanked by two attR signals, this destination vector contains, in addition, one or two cDNA expression elements. Here, we show the rapid construction of expression vectors containing three or four tandemly arrayed cDNA expression elements and their expression in mammalian cells.     

Direct cloning of cDNA inserts from λgt11 phage DNA into a plasmid vector by a novel and simple method

Bacteriophage λgt11 has been used quite extensively for producing cDNA libraries. The cDNA inserts are usually subcloned into a plasmid vector for large scale production and analysis. However, isolating the recombinant DNA of interest from the phage clones can be a tedious task. Since the E. coli strain Y1088 used for λgt11 phage infection carries a pBR322-derived plasmid endogenously, we reasoned that this endogenous plasmid could be used directly for cloning the cDNA phage insert. In this report, we describe a method in which cDNA inserts from λgt11 phage were cloned directly into the pBR322 plasmid vector, by-passing the time-consuming procedures of preparing plasmid DNA as a subcloning vector. This method is likely to be extended to the cloning of DNA inserts derived from other phage λ vectors when bacteria containing endogenous pBR322 are used as host cells.