A novel reductive graphene oxide‐based magnetic molecularly imprinted poly(ethylene‐co‐vinyl alcohol) polymers for the enrichment and determination of polychlorinated biphenyls in fish samples

The novel reductive graphene oxide‐based magnetic molecularly imprinted poly(ethylene‐co‐vinyl alcohol) polymers (rGO@m‐MIPs) were successfully synthesized as adsorbents for six kinds of polychlorinated biphenyls (PCBs) in fish samples. rGO@m‐MIPs was prepared by surface molecular imprinting technique. Besides, Fe₃O₄ nanoparticles (NPs) were employed as magnetic supporters, and rGO@Fe₃O₄ was in situ synthesis. Different from functional monomer and cross‐linker in traditional molecularly imprinted polymer, here, 3,4‐dichlorobenzidine was employed as dummy molecular and poly(ethylene‐co‐vinyl alcohol) was adopted as the imprinted polymers. After morphology and inner structure of the magnetic adsorbent were characterized, the adsorbent was employed for disperse solid phase extraction toward PCBs and exhibited great selectivity and high adsorption efficiency. This material was verified by determination of PCBs in fish samples combined with gas chromatography‐mass spectrometry (GC‐MS) method. According to the detection, the low detection limits (LODs) of PCBs were 0.0035–0.0070 µg l⁻¹ and spiked recoveries ranged between 79.90 and 94.23%. The prepared adsorbent can be renewable for at least 16 times and expected to be a new material for the enrichment and determination of PCBs from contaminated fish samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Applications of magnetic surface imprinted materials for solid phase extraction of levofloxacin in serum samples

In this work, molecularly imprinted magnetic carbon nanotubes (MCNTs@MIPs) was prepared with surface imprinting technique for extraction of levofloxacin in serum samples. The preparation of molecularly imprinted polymers (MIPs) used levofloxacin as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker, and the magnetic carbon nanotubes (MCNTs) was synthesized by solvothermal method. The prepared polymers not only can be separated and collected easily by an external magnetic, but also exhibited high specific surface area and high selectivity to template molecules. Kinetic adsorption and static adsorption capacity investigations indicated that the synthesized MCNTs@MIPs had excellent recognition towards levofloxacin. Furthermore, magnetic solid phase extraction (MSPE) using the prepared MCNTs@MIPs as sorbent was then investigated, and an efficient sample cleanup was obtained with recoveries ranged from 78.7 ± 4.8 % to 83.4 ± 4.1%. In addition, several parameters, including the pH of samples, the amount of MCNTs@MIPs, the adsorption and desorption times, and the eluent, were investigated to obtain optimal extraction efficiency. Under the optimal extraction conditions, the stability of the polymer was also evaluated, and the average recovery reduced less than 7.6% after 5 cycles. MCNTs@MIPs successfully applied in the preconcentration and determination of levofloxacin in serum sample suggested that the MSPE method based on the novel polymers could be a promising alternative for selective and efficient extraction of trace amounts of pharmaceutical substances in bio‐matrix samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of atenolol from human urine using high‐affinity molecularly imprinted solid‐phase extraction sorbent

This study presents a novel, sensitive and selective molecularly imprinted solid‐phase extraction (MISPE)–spectrofluorimetric method for the removal and determination of atenolol from human urine. Molecularly imprinted and non‐imprinted polymers were synthesized thermally using a radical chain polymerization technique and used as solid‐phase extraction sorbents. Acrylic acid ethylene glycol dimethacrylate, dibenzoyl peroxide and dichloroethane were used as a functional monomer, cross‐linker, initiator and porogen, respectively. The calibration curve was in the range of 0.10–2.0 μg/ml for the developed method. Limit of detection and limit of quantification values were 0.032 and 0.099 μg/ml, respectively. Owing to the selectivity of the MISPE technique and the sensitivity of spectrofluorimetry, trace levels of atenolol have been successfully determined from both organic and aqueous media. Relatively high imprinting factor (4.18) and recovery results (74.5–75.3%) were obtained. In addition, intra‐ and interday precision values were 0.38–1.03% and 0.47–2.05%, respectively, proving the precision of the proposed method. Thus, a selective, sensitive and simple MISPE–spectrofluorimetric method has been developed and applied to the direct determination of atenolol from human urine.     

Simultaneous Enantiomeric Determination of Propranolol,Metoprolol, Pindolol,and Atenolol in Natural Waters by HPLC on New Polysaccharide‐Based Stationary Phase using a Highly Selective Molecularly Imprinted Polymer Extraction

A simple high performance liquid chromatography method HPLC‐UV for simultaneous enantiomeric determination of propranolol, metoprolol, pindolol, and atenolol in natural water samples was developed and validated, using a molecularly imprinted polymer solid‐phase extraction. To achieve this purpose, Lux® Cellulose‐1/Sepapak‐1 (cellulose tris‐(3,5‐dymethylphenylcarbamate)) (Phenomenex, Madrid, Spain) chiral stationary phase was used in gradient elution and normal phase mode at ambient temperature. The gradient elution program optimized consisted of a progressive change of the mobile phase polarity from n‐hex/EtOH/DEA 90/10/0.5 (v/v/v) to 60/40/0.5 (v/v/v) in 13 min, delivered at a flow rate of 1.3 ml/min and a sudden change of flow rate to 2.3 ml/min in 1 min. Critical steps in any molecularly imprinted polymer extraction protocol such as the flow rate to load the water sample in the cartridges and the breakthrough volume were optimized to obtain the higher extraction recoveries for all compounds. In optimal conditions (100 ml breakthrough volume loaded at 2.0 ml/min), extraction recoveries for the four pairs of β‐blockers were near 100%. The MIP‐SPE‐HPLC‐UV method developed demonstrates good linearity (R² ≥ 0.99), precision, selectivity, and sensitivity. Method limit detection was 3.0 µg/l for propranolol and pindolol enantiomers and 20.0 and 22.0 µg/l for metoprolol and atenolol enantiomers, respectively. The proposed methodology should be suitable for routine control of these emerging pollutants in natural waters for a better understanding of the environmental impact and fate. Chirality 24:860–866, 2012. © 2012 Wiley Periodicals, Inc.     

Selective solid-phase extraction using molecularly imprinted polymer for analysis of methamidophos in water and soil samples

An analytical methodology for the analysis of methamidophos in water and soil samples incorporating a molecularly imprinted solid-phase extraction process using methamidophos-imprinted polymer was developed. Binding study demonstrated that the polymer exhibited excellent affinity and high selectivity to the methamidophos. Evidence was also found by FT-IR analysis that hydrogen bonding between the CO(2)H in the polymer cavities and the NH(2) and P=O of the template was the origin of methamidophos recognition. The use of molecularly imprinted solid-phase extraction improved the accuracy and precision of the GC method and lowered the limit of detection. The recovery of methamidophos extracted from a 10.0 g soil sample at the 100 ng/g spike level was 95.4%. The limit of detection was 3.8 ng/g. The recovery of methamidophos extracted from 100 mL tap and river water at 1 ng/mL spike level was 96.1% and 95.8%, and the limits of detection were 10 and 13 ng/L respectively. These molecularly imprinted solid-phase extraction procedures enabled selective extraction of polar methamidophos successfully from water and soil samples, demonstrating the potential of molecularly imprinted solid-phase extraction for rapid, selective, and cost-effective sample pretreatment.     

Rapid screening of triazines and quantitative determination in drinking water

A sensitive, rapid and inexpensive analysis method has been developed for the triazines most frequently used in Palestine; the method includes fluorodensitometric screening and densitometric determination of the individual substances. Terbutryn as a model substance was derivatized with dansyl chloride in sodium hydrogen-carbonate or phosphate buffer solution to yield a green-blue fluorescent compound. Derivatization occurred at 120 degrees C within maximum of 10-min reaction time. The fluorescent compound formed was separated from excess reagent and other by-products on silica gel TLC plates and was then determined fluorodensitometrically. A linearity range between 20 and 1200 pg/spot was achieved. The method was also applied to other triazine herbicides such as ametryn, atrazine, propazine, terbuthylazine and simazine. Drinking water samples spiked with triazines were extracted using RP-C18 polar plus cartridges, and the extract could be then dansylated as a total. Recoveries were between 88% and 95%; the detection limit was 10 pg/spot and could be further improved to 2 pg/spot by a dipping solution. For quantification, each of the six triazines can be separated on one of three different stationary phases after solid phase extraction and measured densitometrically. The LOD for each individual triazine was 100 ng/l.     

超声波辅助抽提法在孔雀石绿分子印迹固相萃取中的应用

采用沉淀聚合法制备孔雀石绿分子印迹聚合物(MG-MIPs),以洗脱效率及吸附量为指标,考察超声波辅助抽提法对MIPs中MG洗脱效果及吸附性能的影响,通过扫描电镜观察MIPs的表面形态,并对其吸附性能进行研究。结果表明:模板分子MG在超声30 min、超声10次、料液比m(MG-MIPs)∶V(甲醇-乙酸溶液)为1∶10(g/m L)、温度为25℃、超声功率为270 W的条件下,洗脱效果最好,MIPs在固相萃取柱中的吸附效率较高,达到198μg/g。     

Enantioselective separation and electrochemical sensing of D- and L-tryptophan at ultratrace level using molecularly imprinted micro-solid phase extraction fiber coupled with complementary molecularly imprinted polymer-fiber sensor

Highly efficient enantioselective separation and quantitative recoveries of D- and L-tryptophan in aqueous and real samples can be achieved, with a monolithic molecularly imprinted polymeric fiber that serves both for micro-solid phase extraction and ultratrace sensing, without any false-positive (non-specific) contribution and cross-reactivity, in the range of 0.15-30.00 ng mL(-1) with detection limit as low as 0.0261 ng mL(-1) (relative standard deviation=0.64%, signal/noise=3). The proposed method combining molecularly imprinted micro-solid phase extraction fiber and a complementary molecularly imprinted polymer-carbon composite fiber sensor is proven to be useful for clinical diagnosis of stress-related diseases caused by acute tryptophan depletion.     

Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer

In this study, a novel method is described for the determination of tramadol in biological fluids using molecularly imprinted solid-phase extraction (MISPE) as the sample clean-up technique combined with high-performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and tramadol as template molecule. The novel imprinted polymer was used as a solid-phase extraction (SPE) sorbent for the extraction of tramadol from human plasma and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for the MIP cartridges were studied. The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of tramadol. The limit of detection (LOD) and limit of quantification (LOQ) for tramadol in urine samples were 1.2 and 3.5 μg L⁻¹, respectively. These limits for tramadol in plasma samples were 3.0 and 8.5 μg L⁻¹, respectively. The recoveries for plasma and urine samples were higher than 91%.     

Class-specific molecularly imprinted polymers for the selective extraction and determination of sulfonylurea herbicides in maize samples by high-performance liquid chromatography–tandem mass spectrometry

A novel method based on the molecularly imprinted solid-phase extraction (MISPE) procedure has been developed for the simultaneous determination of concentrations of sulfonylurea herbicides such as chlorsulfuron (CS), monosulfuron (MNS), and thifensulfuron methyl (TFM) in maize samples by liquid chromatography–tandem quadrupole mass spectrometry (LC–MS/MS). The molecularly imprinted polymer (MIP) for sulfonylurea herbicides was synthesized by precipitation polymerization using chlorsulfuron as the template molecule, 2-(diethylamino)ethyl methacrylate (DEAMA) as the functional monomer, and trimethylolpropane trimethacrylate (TRIM) as the cross-linker. The selectivities of the chlorsulfuron template and its analogs on the molecularly imprinted polymer were evaluated by high-performance liquid chromatography (HPLC). The extraction and purification procedures for the solid-phase extraction (SPE) cartridge with a molecularly imprinted polymer as the adsorbent for the selected sulfonylurea herbicides were then established. A molecularly imprinted solid-phase extraction method followed by high-performance liquid chromatography–tandem mass spectrometry for the determination of chlorsulfuron, monosulfuron, and thifensulfuron methyl was also established. The mean recoveries of these compounds in maize were in the range 75–110% and the limits of detection (LOD) of chlorsulfuron, monosulfuron, and thifensulfuron methyl were 0.02, 0.75, and 1.45 μg kg⁻¹, respectively. It was demonstrated that the MISPE–HPLC–MS/MS method could be applied to the determination of chlorsulfuron, monosulfuron, and thifensulfuron methyl in maize samples.     

Molecularly imprinted polymer microspheres for solid-phase extraction of chloramphenicol residues in foods

Preparation of molecularly imprinted polymer microspheres (MIPMs) for chloramphenicol (CAP) by aqueous suspension polymerization is reported for the first time in this study. The resulting MIPMs had the ability to specifically adsorb CAP, and the molecularly imprinted solid phase extraction (MISPE) based on the MIPMs was shown to be applicable for clean-up and preconcentration of trace CAP in milk and shrimp samples with high recoveries of 92.7% and 84.9%, respectively. Combined with MISPE, the conventional HPLC-UV analysis sensitivity for CAP in foods could be significantly increased.     

Design of a new cartridge for selective solid phase extraction using molecularly imprinted polymers: Selective extraction of theophylline from human serum samples

This paper describes design of a new cartridge for selective solid phase extraction (SPE) using molecularly imprinted polymers (MIPs). The apparatus which is termed solvent extraction-MISPE (SE-MISPE) cartridge, consisted of a modified conventional micro test tube and has been developed to perform simultaneous forward-extraction of analyte from aqueous sample solution to an organic phase and back-extraction to MIP solid phase. In order to evaluate the performance of the proposed method, extraction of theophylline (THP) from human serum sample was investigated. An appropriate amount of THP-imprinted polymer was placed in the bottom of the micro tube and an organic solvent pipetted onto it and left to swell the polymer completely. A polyethylene frit to secure MIP particles was positioned by two Teflon rings such that it was fixed below the level of the organic layer. Then, aqueous sample solution containing THP was layered over the organic phase and the lid was closed. After completion of extraction, the organic and aqueous phases were removed and the adsorbed analyte was desorbed using a polar organic solvent. In order to reach the highest recovery, the experimental parameters such as the type of organic solvent, pH and ionic strength of aqueous phase, organic to aqueous volume ratio, time of extraction, type and amount of desorbent solvent were optimized. Under the experimental conditions, a plot of HPLC peak areas vs. initial concentrations of THP in the concentration interval of 0.5–30 μg ml⁻¹ showed a good linearity (r = 0.9974). The limit of detection (LOD) and limit of quantification (LOQ) based on three and ten times of the noise of HPLC profile were 0.09 and 0.3 μg ml⁻¹, respectively. The relative standard deviation (RSD) of the proposed method for the extraction and determination of 5 μg THP from 200 μl standard sample solution for 3 replicate measurements was 3.5%. The results showed that by means of the proposed cartridge, THP could significantly separate from the other structurally related compounds such as theobromine (THB) and caffeine (CAF). The added THP could be quantitatively recovered (79–83%) from the serum samples by the proposed procedure, being thus a guarantee of the accuracy of the SE-MISPE procedure. In addition, the loss of capability of the SE-MISPE cartridge was not considerably observed after 10 times loading and elution cycles.     

PREPARATION OF GLUTATHIONE IMPRINTED POLYMER

Glutathione imprinted polymer was prepared using 1-vinyl imidazole and ethylene glycol dimethacrylate as the functional monomer and crosslinker, respectively, in dimethyl sulfoxide. The adsorption selectivity of glutathione-imprinted polymer was tested by reduced glutathione, oxidized glutathione, and L-Gly-Leu-Tyr in 30% phosphate buffer (0.01 M, pH 5.0)–70% acetonitrile and binding affinity values were compared. Reusability of molecularly imprinted polymer particles was also investigated. Molecularly imprinted polymer particles were found to be stable and to maintain glutathione adsorption capacity at 95% when washed with methanol–acetic acid (10%) after seven usages. Functional monomer 1-vinyl imidazole and cross linker ethylene glycol dimethacrylate-based glutathione imprinted polymer could be used as solid phase extraction material for recognition of glutathione in biological samples.     

Chiral determination of cinchonine using an electrochemiluminescent sensor with molecularly imprinted membrane on the surfaces of magnetic particles

A novel molecular imprinting electrochemiluminescence sensor for detecting chiral cinchonine molecules was developed with a molecularly imprinted polymer membrane on the surfaces of magnetic microspheres. Fe₃O₄@Au nanoparticles modified with 6‐mercapto‐beta‐cyclodextrin were used as a carrier, cinchonine as a template molecule, methacrylic acid as a functional monomer and N ,N ′‐methylenebisacrylamide as a cross‐linking agent. Cinchonine was specifically recognized by the 6‐mercapto‐beta‐cyclodextrin functional molecularly imprinted polymer and detected based on enhancement of the electrochemiluminescence intensity caused by the reaction of tertiary amino structures of cinchonine molecules with Ru(bpy)₃²⁺. Cinchonine concentrations of 1 × 10^?10 to 4 × 10^?7 mol/L showed a good linear relationship with changes of the electrochemiluminescence intensity, and the detection limit of the sensor was 3.13 × 10^?11 mol/L. The sensor has high sensitivity and selectivity, and is easy to renew. It was designed for detecting serum samples, with recovery rates of 98.2% to 107.6%.     

Task-specific ionic liquid-assisted extraction and separation of astaxanthin from shrimp waste

Astaxanthin, as an outstanding antioxidant reagent, was successfully extracted from shrimp waste by the ionic liquids based ultrasonic-assisted extraction. Seven kinds of imidazolium ionic liquids with different cations and anions were investigated in this work and one task-specific ionic liquid in ethanol with 0.50 mol L⁻¹ was selected as the solvent. At the optimized ultrasonic extraction conditions, the extraction amount of astaxanthin increased 98% (92.7 μg g⁻¹) compared to the conventional method (46.7 μg g⁻¹). Furthermore, the extracted solution was isolated through the solid-phase extraction with a molecularly imprinted polymer sorbent. After loading the samples on molecularly imprinted polymer cartridge, the different washing and elution solvents, such as water, methanol, n-hexane, acetone and dichloromethane, were evaluated, and finally, astaxanthin was separated from the shrimp waste extract.     

A surface acoustic wave sensor functionalized with a polypyrrole molecularly imprinted polymer for selective dopamine detection

A surface acoustic wave sensor operating at 104 MHz and functionalized with a polypyrrole molecularly imprinted polymer has been designed for selective detection of dopamine (DA). Optimization of pyrrole/DA ratio, polymerization and immersion times permitted to obtain a highly selective sensor, which has a sensitivity of 0.55°/mM (≈550 Hz/mM) and a detection limit of ≈ 10 nM. Morphology and related roughness parameters of molecularly imprinted polymer surfaces, before and after extraction of DA, as well as that of the non imprinted polymer were characterized by atomic force microscopy. The developed chemosensor selectively recognized dopamine over the structurally similar compound 4‐hydroxyphenethylamine (referred as tyramine), or ascorbic acid,which co‐exists with DA in body fluids at a much higher concentration. Selectivity tests were also carried out with dihydroxybenzene, for which an unexpected phase variation of order of 75% of the DA one was observed. Quantum chemical calculations, based on the density functional theory, were carried out to determine the nature of interactions between each analyte and the PPy matrix and the DA imprinted PPy polypyrrole sensing layer in order to account for the important phase variation observed during dihydroxybenzene injection. Copyright © 2015 John Wiley & Sons, Ltd.     

A modified method for the determination of tobacco specific nitrosamine 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol in human urine by solid phase extraction using a molecularly imprinted polymer and liquid chromatography tandem mass spectrometry

The work described in this paper represents an improvement over a previously published method for the determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) in human urine by solid phase extraction on a molecularly imprinted polymer column coupled with HPLC and -MS/MS detection. The influence of ion suppression due to sample matrix effect was evaluated, and found to influence the response of NNAL. By changing the liquid chromatography conditions, the response for this method was enhanced approximately 25-fold through avoidance of ionization suppression that was found with a previously published method and sample throughput has been improved. The dynamic range of the assay extends from 20 to 2500 pg/mL with a mean r² > 0.998. The lower limit of quantitation for the assay was 20 pg/mL despite the use of an inherently lower sensitivity instrument. The method was validated according to current FDA guidelines for bioanalytical method validations.     

An epitope‐imprinted piezoelectric diagnostic tool for Neisseria meningitidis detection

Neisseria meningitidis, a human‐specific bacterial pathogen causes bacterial meningitis by invading the meninges (outer lining) of central nervous system. It is the polysaccharide present on the bacterial capsid that distinguishes various serogroups of N. meningitidis and can be utilized as antigens to elicit immune response. A computational approach identified candidate T‐cell epitopes from outer membrane proteins Por B of N. meningitidis (MC58): (²⁷³KGLVDDADI²⁸² in loop VII and ¹⁷⁰GRHNSESYH¹⁷⁹ in loop IV) present on the exposed surface of immunogenic loops of class 3 outer membrane proteins allele of N. meningitidis. One of them, KGLVDDADI is used here for designing a diagnostic tool via molecularly imprinted piezoelectric sensor (molecularly imprinted polymer‐quartz crystal microbalance) for N. meningitidis strain MC58. Methacrylic acid, ethylene glycol dimethacrylate and azoisobutyronitrile were used as functional monomer, cross‐linker and initiator, respectively. The epitope can be simultaneously bound to methacrylic acid and fitted into the shape‐selective cavities. On extraction of epitope sequence from thus grafted polymeric film, shape‐selective and sensitive sites were generated on electrochemical quartz crystal microbalance crystal, ie, known as epitope imprinted polymers. Imprinting was characterized by atomic force microscopy images. The epitope‐imprinted sensor was able to selectively bind N. meningitidis proteins present in blood serum of patients suffering from brain fever. Thus, fabricated sensor can be used as a diagnostic tool for meningitis disease.     

Rapid determination of benzo[a]pyrene by membrane enrichment coupled with solid‐phase constant‐wavelength synchronous fluorescence spectrometry

Normal methods for benzo[a]pyrene (BaP) determination, including gas chromatography–mass spectrometry and liquid chromatography with fluorescence detection, involve expensive instruments and complex separation and purification processes. Based on membrane enrichment, coupled with solid‐phase constant‐wavelength synchronous fluorescence spectrometry, a simple, fast, sensitive method was proposed for the determination of BaP in water samples. A Nylon membrane was used as the solid‐phase extraction material for enrichment. After enrichment, a constant‐wavelength synchronous fluorescence spectrum was scanned directly on the membrane‐concentrated BaP without elution. Spectral measurement and enrichment conditions were optimized. Under optimum conditions, when using 150 mL sample solutions, the relationship between fluorescence intensity and BaP concentrations in the 0.05–10.00 μg L^–1 range could be fitted by binomial function with an R² value of 0.9973. Limit of detection (LOD) was calculated to be 0.0137 μg L^–1. The volume of the sample solution was increased to 1000 mL to test if the method could be applied to determine lower BaP concentrations. A linear relationship still existed in the range 2.0–20.0 ng L^–1 BaP with an R² value of 0.9895, and a LOD of 2.4 ng L^–1. The method was also used to measure the BaP concentration in several natural water samples, and recoveries were in the 90–110% range with relative standard deviations (RSDs) in the 0.58–7.93% range. Copyright © 2016 John Wiley & Sons, Ltd.     

A sensitive fluorescent nanosensor for chloramphenicol based on molecularly imprinted polymer‐capped CdTe quantum dots

A novel fluorescent nanosensor using molecularly imprinted silica nanospheres embedded CdTe quantum dots (CdTe@SiO₂@MIP) was developed for detection and quantification of chloramphenicol (CAP). The imprinted sensor was prepared by synthesis of molecularly imprinting polymer (MIP) on the hydrophilic CdTe quantum dots via reverse microemulsion method using small amounts of solvents. The resulting CdTe@SiO₂@MIP nanoparticles were characterized by fluorescence, UV–vis absorption and FT‐IR spectroscopy and transmission electron microscopy. They preserved 48% of fluorescence quantum yield of the parent quantum dots. CAP remarkably quenched the fluorescence of prepared CdTe@SiO₂@MIP, probably via electron transfer mechanism. Under the optimal conditions, the relative fluorescence intensity of CdTe@SiO₂@MIP decreased with increasing CAP by a Stern–Volmer type equation in the concentration range of 40–500 µg L^–1. The corresponding detection limit was 5.0 µg L^–1. The intra‐day and inter‐day values for the precision of the proposed method were all <4%. The developed sensor had a good selectivity and was applied to determine CAP in spiked human and bovine serum and milk samples with satisfactory results. Copyright © 2015 John Wiley & Sons, Ltd.