An innovative approach to molecularly imprinted capillaries for polar templates by grafting polymerization

Molecularly imprinted polymers have been successfully used as selective stationary phases in capillary electrophoresis. Notwithstanding, this technique suffers from several drawbacks as the loss of molecular recognition properties in aqueous media and the lack of feasibility for imprinted systems directed towards highly polar templates soluble in aqueous environments only. Thus, the preparation of imprinted polymers for highly polar, water-soluble analytes, represents a challenge. In this work, we present an innovative approach to overcome these drawbacks. It is based on a surface molecular imprinting technique that uses preformed macromonomers as both functional recognition elements and cross-linking agents. A poly-2-hydroxyethyl-co-methacrylic acid linear polymer was grafted from the surface of silica capillaries. The grafted polymer was exhaustively esterified with methacrylic anhydride to obtain polyethylendimethacrylate-co-methacrylic acid linear chains. Then, as a proof of concept, an adequate amount of a very polar template like penicillin V was added in a hydro-organic mixture, and a thin layer of imprinted polymer was obtained by cross-linking the polymer linear chains. The binding behaviour of the imprinted and non-imprinted capillaries was evaluated in different separation conditions in order to assess the presence of template selectivity and molecular recognition effects. The experimental results clearly show that this innovative kind of imprinted material can be easily obtained in very polar polymerization environments and that it is characterized by enhanced molecular recognition properties in aqueous buffers and good selectivity towards the template and strictly related molecules.     

Development of an aspartic acid-based cross-linking monomer for improved bioseparations

Improved specificity and binding affinity by molecularly imprinted polymers is possible by development of novel functional materials. Furthermore, increasing the cross-link density of imprinted polymers by using cross-linking functional groups was anticipated to improve polymer molecular recognition. A novel cross-linking monomer derived from an L-aspartic acid precursor was synthesized and employed in molecularly imprinted polymers to mimic more closely the scaffolding of proteins, and thus provide more protein-like selectivity. Chromatographic results revealed a more than 7-fold improvement in polymers imprinted using the new monomer versus a traditionally formulated polymer imprinted with methacrylic acid as the functional monomer.     

New biomedical devices with selective peptide recognition properties. Part 1: Characterization and cytotoxicity of molecularly imprinted polymers

Molecular imprinting is a technique for the synthesis of polymers capable to bind target molecules selectively. The imprinting of large proteins, such as cell adhesion proteins or cell receptors, opens the way to important and innovative biomedical applications. However, such molecules can incur into important conformational changes during the preparation of the imprinted polymer impairing the specificity of the recognition cavities. The "epitope approach" can overcome this limit by adopting, as template, a short peptide sequence representative of an accessible fragment of a larger protein. The resulting imprinted polymer can recognize both the template and the whole molecule thanks to the specific cavities for the epitope. In this work two molecularly imprinted polymer formulations (a macroporous monolith and nanospheres) were obtained using the protected peptide Z-Thr-Ala-Ala-OMe, as template, and Z-Thr-Ile-Leu-OMe, as analogue for the selectivity evaluation, methacrylic acid, as functional monomer, and trimethylolpropane trimethacrylate and pentaerythritol triacrylate (PETRA), as cross-linkers. Polymers were synthesized by precipitation polymerization and characterized by standard techniques. Polymerization and rebinding solutions were analyzed by high performance liquid chromatography. The highly cross-linked polymers retained about 70% of the total template amount, against (20% for the less cross-linked ones). The extracted template amount and the rebinding capacity decreased with the cross-linking degree, while the selectivity showed the opposite behaviour. The PETRA cross-linked polymers showed the best recognition (MIP 2-, alpha=1.71) and selectivity (MIP 2+, alpha'=5.58) capabilities. The cytotoxicity tests showed normal adhesion and proliferation of fibroblasts cultured in the medium that was put in contact with the imprinted polymers.     

Molecular imprinting technology: challenges and prospects for the future

Molecular imprinting is a technique for the fabrication of biomimetic polymeric recognition sites or “plastic antibodies/receptors” which is attracting rapidly increasing interest. By this technology, recognition matrices can be prepared which possess high substrate selectivity and specificity. In the development of this technology, several applications have been foreseen in which imprinted materials may be exchanged for natural recognition elements. Thus, molecularly imprinted polymers have been used as antibody/receptor binding mimics in immunoassay-type analyses, as enzyme mimics in catalytic applications and as recognition matrices in biosensors. The best developed application area for imprinted materials, though, has been as stationary phases for chromatography, in general, and chiral chromatography, in particular. This review seeks to highlight some of the more intriguing advantages of the technique as well as pointing out some of the difficulties encountered. The prospects for future development will also be considered. Chirality 10:195–209, 1998. © 1998 Wiley-Liss, Inc.     

A molecular imprinted polymer with recognition properties towards the carcinogenic mycotoxin ochratoxin A

A molecularly imprinted polymer which recognises the mycotoxin ochratoxin A was prepared using the mimic N-(4-chloro-1-hydroxy-2-naphthoylamido)-(L) -phenylalanine as a template. The polymer was obtained by dissolving the template, methacrylic acid and ethylendimethacrylate in chloroform and polymerising the mixture by thermal treatment at 60°C. The monolith obtained was crushed, sieved to 30–90 m and extensively washed till the template could no longer be found in the washing solution. The binding properties towards the template, ochratoxin A and several related molecules were measured by eluting with acetonitrile and chloroform a HPLC column packed with the imprinted polymer. The experimental results show that the polymer recognises not only the template well, but also the ochratoxin A. The specific molecular recognition effect is due to hydrogen bond interactions but in order to assure the full recognition effect adjunctive steric factors are necessary. The magnitude of these interactions can be controlled by the use of limited amounts of acetic acid in the mobile phase.From the measurement of the relative selectivity it was found that only the simultaneous presence of the carboxyl, the phenolic hydroxyl and certain peculiar substructures such as the chlorine atom assures the whole recognition of the template.     

Molecular imprinting of nitrophenol and hydroxybenzoic acid isomers: effect of molecular structure and acidity on imprinting

Three nitrophenol isomer-imprinted polymers were prepared under the same conditions using 4-vinylpyridine as a functional monomer. Different recognition capacities for template molecules were observed for the three polymers. Another imprinting system with stronger acidity than nitrophenol isomers, 2-hydroxybenzoic acid (salicylic acid) and 4-hydroxybenzoic acid, was imprinted using 4-vinylpyridine or acrylamide as functional monomer respectively. Both 4-hydroxybenzoic acid-imprinted polymers using the two monomers showed recognition ability for the template molecule. However, when acrylamide was chosen as functional monomer, the salicylic acid-imprinted polymer showed very weak recognition for the template molecule, whereas strong recognition ability of the resultant polymer for salicylic acid was observed with 4-vinylpyridine as functional monomer. It seems that the structure and acidity of template molecules is responsible for the difference in recognition, by influencing the formation and strength of interaction between template molecule and functional monomer during the imprinting process. An understanding of the mechanism of molecular imprinting and molecular recognition of MIPs will help to predict the selectivity of MIPs on the basis of template molecule properties.     

Molecularly imprinted monolithic stationary phases for liquid chromatographic separation of tryptophan andN-CBZ-phenylalanine enantiomers

Monolithic molecularly imprinted columns were designed and prepared by anin-situ thermal-initiated copolymerization technique for rapid separation of tryptophan andN-CBZ-phenylalanine enantiomers. The influence of polymerization conditions and separation conditions on the specific molecular recognition ability for enantiomers and diastereomers was investigated. The specious molecular recognition was found to be dependent on the stereo structures and the arrangement of functional groups of the imprinted molecule and the cavities in the molecularly imprinted polymer (MIP). Moreover, hydrogen bonding interactions and hydrophobic interactions played an important role in the retention and separation. Compared to conventional MIP preparation procedures, the present method is very simple, and its macroporous structure has excellent separation properties.     

Multiple-point adsorption of terbium ions by lead ion templated thermosensitive gel: elucidating recognition of conformation in gel by terbium probe

Lead ion templated thermosensitive heteropolymer gel which has recognition ability of methacrylate pairs has been synthesized and characterized. The gel consists of a main monomer component, N-isopropylacrylamide (NIPA), responsible for volume phase transition, methacrylic acid (MAA) moieties imprinted as pairs to adsorb terbium ions and cross-links. An imprinting technique was applied using lead ion complex with methacrylate ligands in dioxane media. After gel was obtained, lead ions were removed by washing and the imprinted gel showed strong binding ability to terbium ions, comparable with that of the non-imprinted gel prepared without lead ions. It was found that the Tb(3+) fluorescence intensity was considerably increased upon binding this ion to both imprinted and non-imprinted gels, but the largest enhancement of fluorescence intensity was observed when Tb(3+) was bound to imprinted gel in shrunken state. This is because of the decrease of coordinated water molecules on Tb(3+) and the strong binding of this ion to methacrylate pairs which are encoded within the weakly cross-linked network of imprinted gel.     

Molecular imprinting of proteins in polymers attached to the surface of nanomaterials for selective recognition of biomacromolecules

This review article summarizes the preparation of polymers imprinted with proteins that exhibit antibody-like specificity due to the presence of well-defined recognition sites. We present the newest developments concerned with use of nanomaterials, such as magnetic and silica nanoparticles, nanowires, carbon nanotubes, and quantum dots as supports enabling the preparation of protein-imprinted polymers via surface imprinting techniques. As an alternative receptor-like synthetic materials, these conjugates are attracting a great deal of interest in various fields including proteomics, genomics, and fabrication of selective sensors. However, imprinting of large biomacromolecules such as proteins still remains a challenge due to the inherent limitations related to protein properties. In the text below, we also describe examples of applications focused on selective recognition of biomacromolecules.     

Molecular imprinting in monolayer surfaces

A comprehensive report on molecularly imprinted monolayers (MIMs) is presented, but does not include bulk-polymer thin film coatings on surfaces, inorganic surface imprinting, polymer grafting and layer-by-layer methods. Due to difficulties in imprinting large molecules and obtaining fast binding responses with traditional network polymer materials, MIMs have been developed with the aim of enhancing mass-transfer of analytes in imprinted materials. Three approaches to MIM fabrication have been developed with respect to the formation of the pre-organized template-matrix complex. In the first approach, the molecular binding sites are formed in a monolayer on a glass or gold surface. The second approach uses a template-macromolecule complex to form binding sites in the solution phase that are immobilized onto a surface; and the third approach transfers an imprinted Langmuir film onto a gold surface. Mass transfer in these MIMs in most cases is on the order of minutes, and both small and large molecules (proteins) have been imprinted.     

Immobilized pH gradients for isoelectric focusing. III. Preparative separations in highly diluted gels

A further improvement on the preparative aspects of immobilized pH gradients (IPG) (J. Biochem. Biophys. Methods (1983) 8, 135–172) is described, based on the use of soft (highly diluted) polyacrylamide gels. While in conventional IPGs in 5%T gels an upper load limit of 40–45 mg protein/ml gel volume is found, in 2.5%T gels, containing the same amount of Immobiline, as much as 90 mg protein/ml gel can be applied, without overloading effects. This is an extraordinary amount of material to ba carried by a gel phase, and renders IPG by far the leading technique in any electrophoretic fractionation. A new, two-step casting technique, based on the formation of a %T step and a pH plateau around the application trench, is described. A new method for electrophoretic protein recovery from IPG gel strips, based on embedding on low-gelling agarose (37°C), is reported. The physico-chemical properties of highly diluted gels, in relation to their protein loading ability, are evaluated and discussed. It is recommended that diluted gels (e.g. 3.5%T) be used also in analytical runs, since sharper protein zones are obtained, due to the increased charge density on the polymer coil.     

Molecularly imprinted polymers for the recognition of proteins: the state of the art

Molecular imprinting has proved to be an effective technique for the creation of recognition sites on a polymer scaffold. Protein imprinting has been a focus for many chemists working in the area of molecular recognition, since the creation of synthetic polymers that can specifically recognise proteins is a very challenging but potentially extremely rewarding objective. It is expected that molecularly imprinted polymers (MIPs) with specificity for proteins will find application in medicine, diagnostics, proteomics, environmental analysis, sensors and drug delivery. In this review, the authors provide an overview of the progress achieved in the decade between 1994 and 2005, with respect to the challenging area of MIPs for protein recognition. The discussion furnishes a comparative analysis of different approaches developed, underlining their relative advantages and disadvantages and highlighting trends and possible future directions.     

Bioinspired polymeric materials: in-between proteins and plastics

Chemical and biological researchers are making rapid progress in the design and synthesis of non-natural oligomers and polymers that emulate the properties of natural proteins. Whereas molecular biologists are exploring biosynthetic routes to non-natural proteins with controlled material properties, synthetic polymer chemists are developing bioinspired materials with well-defined chemical and physical properties that function or self-organize according to defined molecular architectures. Bioorganic chemists, on the other hand, are developing several new classes of non-natural oligomers that are bridging the gap between molecular biology and polymer chemistry. These synthetic oligomers have both sidechain and length specificity, and, in some cases, demonstrate capability for folding, self-assembly, and specific biorecognition. Continued active exploration of diverse backbone and sidechain chemistries and connectivities in bioinspired oligomers will offer the potential for self-organized materials with greater chemical diversity and biostability than natural peptides. Taken together, advances in molecular bioengineering, polymer chemistry, and bioorganic chemistry are converging towards the creation of useful bioinspired materials with defined molecular properties.     

Two-dimensional gel analysis of soluble proteins. Charaterization of guinea pig exocrine pancreatic proteins.

A two-dimensional gel technique using slab gel isoelectric focusing in the first dimension and sodium dodecyl sulfate gradient gel electrophoresis in the second dimension has been developed for the separation of soluble proteins larger than 10,000 daltons. The technique is sensitive to 0.6 mug of protein and recovery of radiolabeled proteins averages 90%. Analysis of secretory protein from the guinea pig exocrine pancreas shows the presence of 19 distinct high molecular weight proteins. Each of these proteins has been characterized by isoelectric point, molecular weight, and proportionate mass. Thirteen of the 19 proteins have been identified by actual or potential enzymatic activity,accounting for 96% of the protein mass resolved by the two-dimensional gels.     

The microcontact imprinting of proteins: the effect of cross-linking monomers for lysozyme, ribonuclease A and myoglobin

The performance of molecularly imprinted polymers (MIPs) is of interest to researchers in the field of analytical chemistry, and in the pharmaceutical and food industries. Because the choice of the functional monomer(s) plays a key role in the selectivity of a MIP, the synthesis of an effective, tight-binding MIP can be difficult and time-consuming, involving the evaluation of the binding performance of MIPs of many different compositions. In this study, we report an express method combining molecular imprinting and microcontact printing techniques to prepare a polymer thin film as an artificial antibody. In addition to the microcontact printing technique, isothermal titration of monomers to proteins stamps was investigated to screen the functional monomer for MIPs. Finally, the importance of the choice of cross-linking monomers in MIPs was studied, and these studies suggest that monomers containing an optimal length PEG spacer give higher imprinting effectiveness. Several model antigens (lysozyme, ribonuclease A and myoglobin) were adsorbed on a cover glasses that were pretreated with hexamethyldisilazane (HMDS). These protein stamps were then contacted with different monomer solutions (cross-linking monomers) on a glass slide substrate. Photopolymerization yielded the molecularly imprinted polymer. This technique, analogous to microcontact printing, allows for the rapid, parallel synthesis of MIPs of different compositions, and requires very small volumes of monomers (ca. 4 microL). The technique also avoids potential solubility problems with the molecular targets. Of several cross-linking monomers screened, tetraethyleneglycol dimethacrylate (TEGDMA) gave the most selective lysozyme binding, while polyethyleneglycol 400 dimethacrylate (PEG400DMA) were most selective for ribonuclease A and myoglobin.     

A Novel Method for Localizing Reporter Fluorescent Beads Near the Cell Culture Surface for Traction Force Microscopy

PA gels have long been used as a platform to study cell traction forces due to ease of fabrication and the ability to tune their elastic properties. When the substrate is coated with an extracellular matrix protein, cells adhere to the gel and apply forces, causing the gel to deform. The deformation depends on the cell traction and the elastic properties of the gel. If the deformation field of the surface is known, surface traction can be calculated using elasticity theory. Gel deformation is commonly measured by embedding fluorescent marker beads uniformly into the gel. The probes displace as the gel deforms. The probes near the surface of the gel are tracked. The displacements reported by these probes are considered as surface displacements. Their depths from the surface are ignored. This assumption introduces error in traction force evaluations. For precise measurement of cell forces, it is critical for the location of the beads to be known. We have developed a technique that utilizes simple chemistry to confine fluorescent marker beads, 0.1 and 1 µm in diameter, in PA gels, within 1.6 μm of the surface. We coat a coverslip with poly-D-lysine (PDL) and fluorescent beads. PA gel solution is then sandwiched between the coverslip and an adherent surface. The fluorescent beads transfer to the gel solution during curing. After polymerization, the PA gel contains fluorescent beads on a plane close to the gel surface.     

Synthesis and catalysis by molecularly imprinted materials

Molecularly imprinted materials have been demonstrated to possess a very high degree of selectivity towards targeted substrates. In addition to such tailor-made molecular recognition, progress has been made in introducing reactive groups into the recognition sites. Putting teeth into imprinted matrices is one method of making true enzyme mimics or plastizymes, which are plastic polymer enzyme mimics.     

High-performance molecular sieve chromatography of proteins on agarose columns: the relation between concentration and porosity of the gel

Curves showing the relation between log (molecular weight) and distribution coefficient are presented for proteins subjected to molecular sieve chromatography on crosslinked and non-crosslinked agarose gels of different concentrations. These curves, which facilitate selection of the gel concentration that gives optimal resolution in any particular separation problem, show that the exclusion limit of 5, 9, 12, and 20% agarose gels correspond to protein with molecular weights above 1,000,000, 600,000, 450,000, and 280,000, respectively. Plate numbers have been determined for columns of 20% agarose at different flow rates and bead sizes. Separations of model proteins by high-performance molecular sieve chromatography on agarose beads are shown.     

Effect of the solvent on recognition properties of molecularly imprinted polymer specific for ochratoxin A

A molecularly imprinted polymer specific for the mycotoxin ochratoxin A has been synthesised using a non-covalent approach. The polymer has shown an excellent affinity and specificity for the target template in aqueous solutions. The binding experiments, NMR study and molecular modelling have proven that the template recognition by polymer originates from the shape complementarity of binding sites. The binding mechanism is critically depended on factors that affect the polymer conformation. Thus the variation in buffer concentration, pH and presence of organic solvent, which affect the polymer swelling or shrinking, had a profound effect on the polymer recognition properties.