Mapping QTL for drought stress-induced premature senescence and maturity in cowpea [Vigna unguiculata (L.) Walp.]

Cowpea is an important crop for subsistence farmers in arid regions of Africa, Asia, and South America. Efforts to develop cultivars with improved productivity under drought conditions are constrained by lack of molecular markers associated with drought tolerance. Here, we report the mapping of 12 quantitative trait loci (QTL) associated with seedling drought tolerance and maturity in a cowpea recombinant inbred (RIL) population. One hundred and twenty-seven F₈ RILs developed from a cross between IT93K503-1 and CB46 were screened with 62 EcoR1 and Mse1 primer combinations to generate 306 amplified fragment length polymorphisms for use in genetic linkage mapping. The same population was phenotyped for maintenance of stem greenness (stg) and recovery dry weight (rdw) after drought stress in six greenhouse experiments. In field experiments conducted over 3 years, visual ratings and dry weights were used to phenotype drought stress-induced premature senescence in the RIL population. Kruskall–Wallis and multiple-QTL model mapping analysis were used to identify QTL associated with drought response phenotypes. Observed QTL were highly reproducible between stg and rdw under greenhouse conditions. Field studies confirmed all ten drought-response QTL observed under greenhouse conditions. Regions harboring drought-related QTL were observed on linkage groups 1, 2, 3, 5, 6, 7, 9, and 10 accounting for between 4.7 and 24.2% of the phenotypic variance (R ²). Further, two QTL for maturity (R ² = 14.4–28.9% and R ² = 11.7–25.2%) mapped on linkage groups 7 and 8 separately from drought-related QTL. These results provide a platform for identification of genetic determinants of seedling drought tolerance in cowpea. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular Dissection of a Genomic Region Governing Root Traits Associated with Drought Tolerance Employing a Combinatorial Approach of QTL Mapping and RNA-seq in Rice

Drought is considered as one of the major obstacles for progressive yield enhancement and stability in rice, especially in rain-fed conditions. Being a complex trait, drought is regulated by numerous quantitative trait loci (QTL), of which, however, very few underlying genes have been cloned. In the present investigation, we made an attempt to uncover the candidate gene(s) behind a major QTL, rdw8.1 governing drought tolerance traits viz., root dry weight and root length. The targeted QTL has been delimited to 366.75 kb from 10.17 Mb by QTL mapping in BC₁F₂ population. Further, the targeted region was delineated employing next-generation sequencing based RNA-seq. Based on the QTL mapping and RNA-seq approaches, the plausible candidate gene underlying the QTL region was identified as a wound inducible protein (LOC_Os08g08090). This gene can be of potential value to enhance the drought tolerance of the elite rice varieties through molecular breeding.     

Sodium exclusion QTL associated with improved seedling growth in bread wheat under salinity stress

Worldwide, dryland salinity is a major limitation to crop production. Breeding for salinity tolerance could be an effective way of improving yield and yield stability on saline-sodic soils of dryland agriculture. However, this requires a good understanding of inheritance of this quantitative trait. In the present study, a doubled-haploid bread wheat population (Berkut/Krichauff) was grown in supported hydroponics to identify quantitative trait loci (QTL) associated with salinity tolerance traits commonly reported in the literature (leaf symptoms, tiller number, seedling biomass, chlorophyll content, and shoot Na⁺ and K⁺ concentrations), understand the relationships amongst these traits, and determine their genetic value for marker-assisted selection. There was considerable segregation within the population for all traits measured. With a genetic map of 527 SSR-, DArT- and gene-based markers, a total of 40 QTL were detected for all seven traits. For the first time in a cereal species, a QTL interval for Na⁺ exclusion (wPt-3114-wmc170) was associated with an increase (10%) in seedling biomass. Of the five QTL identified for Na⁺ exclusion, two were co-located with seedling biomass (2A and 6A). The 2A QTL appears to coincide with the previously reported Na⁺ exclusion locus in durum wheat that hosts one active HKT1;4 (Nax1) and one inactive HKT1;4 gene. Using these sequences as template for primer design enabled mapping of at least three HKT1;4 genes onto chromosome 2AL in bread wheat, suggesting that bread wheat carries more HKT1;4 gene family members than durum wheat. However, the combined effects of all Na⁺ exclusion loci only accounted for 18% of the variation in seedling biomass under salinity stress indicating that there were other mechanisms of salinity tolerance operative at the seedling stage in this population. Na⁺ and K⁺ accumulation appear under separate genetic control. The molecular markers wmc170 (2A) and cfd080 (6A) are expected to facilitate breeding for salinity tolerance in bread wheat, the latter being associated with seedling vigour.     

A quantitative trait locus for cold tolerance at the booting stage on rice chromosome 8

A quantitative trait locus (QTL) for cold tolerance at the booting stage of a cold-tolerant rice breeding line, Hokkai-PL9, was analyzed. A total of 487 simple sequence repeat (SSR) markers distributed throughout the genome were used to survey for polymorphism between Hokkai-PL9 and a cold-sensitive breeding line, Hokkai287, and 54 markers were polymorphic. Single marker analysis revealed that markers on chromosome 8 are associated with cold tolerance. By interval mapping using an F₂ population between Hokkai-PL9 and Hokkai287, a QTL for cold tolerance was detected on the short arm of chromosome 8. The QTL explains 26.6% of the phenotypic variance, and its additive effect is 11.4%. Substitution mapping suggested that the QTL is located in a 193-kb interval between SSR markers RM5647 and PLA61. We tentatively designated the QTL as qCTB8 (quantitative trait locus for cold tolerance at the booting stage on chromosome 8).     

Genetic Architecture of Delayed Senescence,Biomass, and Grain Yield under Drought Stress in Cowpea

The stay-green phenomenon is a key plant trait with wide usage in managing crop production under limited water conditions. This trait enhances delayed senescence, biomass, and grain yield under drought stress. In this study we sought to identify QTLs in cowpea (Vigna unguiculata) consistent across experiments conducted in Burkina Faso, Nigeria, Senegal, and the United States of America under limited water conditions. A panel of 383 diverse cowpea accessions and a recombinant inbred line population (RIL) were SNP genotyped using an Illumina 1536 GoldenGate assay. Phenotypic data from thirteen experiments conducted across the four countries were used to identify SNP-trait associations based on linkage disequilibrium association mapping, with bi-parental QTL mapping as a complementary strategy. We identified seven loci, five of which exhibited evidence suggesting pleiotropic effects (stay-green) between delayed senescence, biomass, and grain yield. Further, we provide evidence suggesting the existence of positive pleiotropy in cowpea based on positively correlated mean phenotypic values (0.34< r <0.87) and allele effects (0.07< r <0.86) for delayed senescence and grain yield across three African environments. Three of the five putative stay-green QTLs, Dro-1, 3, and 7 were identified in both RILs and diverse germplasm with resolutions of 3.2 cM or less for each of the three loci, suggesting that these may be valuable targets for marker-assisted breeding in cowpea. Also, the co-location of early vegetative delayed senescence with biomass and grain yield QTLs suggests the possibility of using delayed senescence at the seedling stage as a rapid screening tool for post-flowering drought tolerance in cowpea breeding. BLAST analysis using EST sequences harboring SNPs with the highest associations provided a genomic context for loci identified in this study in closely related common bean (Phaseolus vulgaris) and soybean (Glycine max) reference genomes.     

Genetic analysis and molecular mapping of seedling survival drought tolerance gene in lentil (<Emphasis Type="Italic">Lens culinaris</Emphasis> Medikus)

Lentil populations were developed from crosses between ‘JL-3’ (sensitive to drought stress) and ‘PDL-1’ and ‘FLIP-96-51’ (tolerant to drought stress), to study the inheritance of drought tolerance and to identify the markers associated with it. The parental types, F₁, F₂, F₃, and backcross (BC) generations were screened for drought tolerance using seedling survivability and drought scores. The F₁ hybrids responded similar to the drought-tolerant parent, indicating dominance of seedling drought tolerance over sensitivity. Segregation for seedling survival drought tolerance versus sensitivity in F₂ generation was in complete agreement with monogenic 3:1 ratio. The F₃ families and backcross data additionally confirmed monogenic tolerance based on seedling survival under drought. Out of 51 SSR markers screened, thirteen markers were polymorphic between the parental types. Seven markers among them were found to be associated with seedling survival drought tolerance through bulk segregant analysis. Association of these markers with seedling survival drought tolerance was further confirmed through their screening on 10 drought-tolerant and drought-sensitive genotypes. These seven markers were screened in F₂ mapping population (JL-3 × PDL-1) of 101 individuals to map their position in relation to the gene for seedling survival drought tolerance. Linkage analysis mapped the seven markers within a map distance of 133.2 cM. A single major gene Sdt was identified with a LOD value of 19.9 and phenotypic variation (R ²) of 69.7 %. The Sdt locus was obtained in the marker interval of PLC_105–PBA_LC_1480 spanning 24.9 cM with the closest marker PLC_105 at a distance of 9.0 cM on the obtained linkage group. This is the first report on genetic control and linkage of SSR markers for drought tolerance in lentil. These linked markers can be used in molecular breeding programmes for introgression of seedling survival drought tolerance gene in high-yielding cultivars.     

Association analysis of salt tolerance in cowpea (<Emphasis Type="Italic">Vigna unguiculata</Emphasis> (L.) Walp) at germination and seedling stages

Key message

This is the first report on association analysis of salt tolerance and identification of SNP markers associated with salt tolerance in cowpea.

Abstract

Cowpea (Vigna unguiculata (L.) Walp) is one of the most important cultivated legumes in Africa. The worldwide annual production in cowpea dry seed is 5.4 million metric tons. However, cowpea is unfavorably affected by salinity stress at germination and seedling stages, which is exacerbated by the effects of climate change. The lack of knowledge on the genetic underlying salt tolerance in cowpea limits the establishment of a breeding strategy for developing salt-tolerant cowpea cultivars. The objectives of this study were to conduct association mapping for salt tolerance at germination and seedling stages and to identify SNP markers associated with salt tolerance in cowpea. We analyzed the salt tolerance index of 116 and 155 cowpea accessions at germination and seedling stages, respectively. A total of 1049 SNPs postulated from genotyping-by-sequencing were used for association analysis. Population structure was inferred using Structure 2.3.4; K optimal was determined using Structure Harvester. TASSEL 5, GAPIT, and FarmCPU involving three models such as single marker regression, general linear model, and mixed linear model were used for the association study. Substantial variation in salt tolerance index for germination rate, plant height reduction, fresh and dry shoot biomass reduction, foliar leaf injury, and inhibition of the first trifoliate leaf was observed. The cowpea accessions were structured into two subpopulations. Three SNPs, Scaffold87490_622, Scaffold87490_630, and C35017374_128 were highly associated with salt tolerance at germination stage. Seven SNPs, Scaffold93827_270, Scaffold68489_600, Scaffold87490_633, Scaffold87490_640, Scaffold82042_3387, C35069468_1916, and Scaffold93942_1089 were found to be associated with salt tolerance at seedling stage. The SNP markers were consistent across the three models and could be used as a tool to select salt-tolerant lines for breeding improved cowpea tolerance to salinity.

     

Detection and validation of stay-green QTL in post-rainy sorghum involving widely adapted cultivar,M35-1 and a popular stay-green genotype B35

Background

Sorghum [Sorghum bicolor (L.) Moench] is an important dry-land cereal of the world providing food, fodder, feed and fuel. Stay-green (delayed-leaf senescence) is a key attribute in sorghum determining its adaptation to terminal drought stress. The objective of this study was to validate sorghum stay-green quantitative trait loci (QTL) identified in the past, and to identify new QTL in the genetic background of a post-rainy adapted genotype M35-1.

Results

A genetic linkage map based on 245 F₉ Recombinant Inbred Lines (RILs) derived from a cross between M35-1 (more senescent) and B35 (less senescent) with 237 markers consisting of 174 genomic, 60 genic and 3 morphological markers was used. The phenotypic data collected for three consecutive post-rainy crop seasons on the RIL population (M35-1 × B35) was used for QTL analysis. Sixty-one QTL were identified for various measures of stay-green trait and each trait was controlled by one to ten QTL. The phenotypic variation explained by each QTL ranged from 3.8 to 18.7%. Co-localization of QTL for more than five traits was observed on two linkage groups i.e. on SBI-09-3 flanked by S18 and Xgap206 markers and, on SBI-03 flanked by XnhsbSFCILP67 and Xtxp31. QTL identified in this study were stable across environments and corresponded to sorghum stay-green and grain yield QTL reported previously. Of the 60 genic SSRs mapped, 14 were closely linked with QTL for ten traits. A genic marker, XnhsbSFCILP67 (Sb03g028240) encoding Indole-3-acetic acid-amido synthetase GH3.5, was co-located with QTL for GLB, GLM, PGLM and GLAM on SBI-03. Genes underlying key enzymes of chlorophyll metabolism were also found in the stay-green QTL regions.

Conclusions

We validated important stay-green QTL reported in the past in sorghum and detected new QTL influencing the stay-green related traits consistently. Stg2, Stg3 and StgB were prominent in their expression. Collectively, the QTL/markers identified are likely candidates for subsequent verification for their involvement in stay-green phenotype using NILs and to develop drought tolerant sorghum varieties through marker-assisted breeding for terminal drought tolerance in sorghum.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-909) contains supplementary material, which is available to authorized users.     

Rapid upregulation ofDehyrin3 andDehydrin4 in response to dehydration is a characteristic of drought-tolerant genotypes in barley

The identification of molecular markers and marker-aided selection are essential to the efficient breeding of drought-tolerant plants. However, because that characteristic is controlled by many quantitative trait loci, such markers that can screen and trace desirable barley genotypes in a segregating population or germplasm have not yet been determined. Relative water content has been used to estimate drought tolerance in plants because it is highly correlated with the drought index of yield. To develop reliable gene-specific markers for identifying tolerant versus susceptible genotypes, we performed suppression subtractive hybridization to identify candidate genes. We used two domestic barley cultivars, one having the highest RWC (drought-tolerant ‘Chalbori’) and the other having the lowest (drought-susceptible ‘Daebaekbori’). In response to dehydration at the early seedling stage, rapid upregulation ofDehydrin3 (Dhn3) andDhn4 occurred in the drought-tolerant genotypes, but not in the susceptible ones. Similar results were obtained with mature plants growing under frequent drought stress in the greenhouse. In addition,Dhn3 andDhn4 conferred higher drought tolerance when they were over-expressed in transgenicArabidopsis. Thus, in addition to using assessments of RWC, we propose thatDhn3 andDhn4 expressions can serve as drought-induced gene-specific markers to determine drought-tolerant barley genotypes at the seedling stage.     

Quantitative trait loci and candidate gene mapping of aluminum tolerance in diploid alfalfa

Aluminum (Al) toxicity in acid soils is a major limitation to the production of alfalfa (Medicago sativa subsp. sativa L.) in the USA. Developing Al-tolerant alfalfa cultivars is one approach to overcome this constraint. Accessions of wild diploid alfalfa (M. sativa subsp. coerulea) have been found to be a source of useful genes for Al tolerance. Previously, two genomic regions associated with Al tolerance were identified in this diploid species using restriction fragment length polymorphism (RFLP) markers and single marker analysis. This study was conducted to identify additional Al-tolerance quantitative trait loci (QTLs); to identify simple sequence repeat (SSR) markers that flank the previously identified QTLs; to map candidate genes associated with Al tolerance from other plant species; and to test for co-localization with mapped QTLs. A genetic linkage map was constructed using EST-SSR markers in a population of 130 BC₁F₁ plants derived from the cross between Al-sensitive and Al-tolerant genotypes. Three putative QTLs on linkage groups LG I, LG II and LG III, explaining 38, 16 and 27% of the phenotypic variation, respectively, were identified. Six candidate gene markers designed from Medicago truncatula ESTs that showed homology to known Al-tolerance genes identified in other plant species were placed on the QTL map. A marker designed from a candidate gene involved in malic acid release mapped near a marginally significant QTL (LOD 2.83) on LG I. The SSR markers flanking these QTLs will be useful for transferring them to cultivated alfalfa via marker-assisted selection and for pyramiding Al tolerance QTLs.     

Using QTL mapping to investigate the relationships between abiotic stress tolerance (drought and salinity) and agronomic and physiological traits

Background

Drought and salinity are two major abiotic stresses that severely limit barley production worldwide. Physiological and genetic complexity of these tolerance traits has significantly slowed the progress of developing stress-tolerant cultivars. Marker-assisted selection (MAS) may potentially overcome this problem. In the current research, seventy two double haploid (DH) lines from a cross between TX9425 (a Chinese landrace variety with superior drought and salinity tolerance) and a sensitive variety, Franklin were used to identify quantitative trait loci (QTL) for drought and salinity tolerance, based on a range of developmental and physiological traits.

Results

Two QTL for drought tolerance (leaf wilting under drought stress) and one QTL for salinity tolerance (plant survival under salt stress) were identified from this population. The QTL on 2H for drought tolerance determined 42% of phenotypic variation, based on three independent experiments. This QTL was closely linked with a gene controlling ear emergency. The QTL on 5H for drought tolerance was less affected by agronomic traits and can be effectively used in breeding programs. A candidate gene for this QTL on 5H was identified based on the draft barley genome sequence. The QTL for proline accumulation, under both drought and salinity stresses, were located on different positions to those for drought and salinity tolerance, indicating no relationship with plant tolerance to either of these stresses.

Conclusions

Using QTL mapping, the relationships between QTL for agronomic and physiological traits and plant drought and salinity tolerance were studied. A new QTL for drought tolerance which was not linked to any of the studied traits was identified. This QTL can be effectively used in breeding programs. It was also shown that proline accumulation under stresses was not necessarily linked with drought or salinity tolerance based on methods of phenotyping used in this experiment. The use of proline content in breeding programs can also be limited by the accuracy of phenotyping.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1243-8) contains supplementary material, which is available to authorized users.     

Maize leaf temperature responses to drought: Thermal imaging and quantitative trait loci (QTL) mapping

Leaf temperature has been shown to vary when plants are subjected to water stress conditions. Recent advances in infrared thermography have increased the probability of recording drought tolerant responses more accurately. The aims of this study were to identify the effects of drought on leaf temperature using infrared thermography. Furthermore, the genomic regions responsible for the expression of leaf temperature variation in maize seedlings (Zea mays L.) were explored. The maize inbred lines Zong3 and 87-1 were evaluated using infrared thermography and exhibited notable differences in leaf temperature response to water stress. Correlation analysis indicated that leaf temperature response to water stress played an integral role in maize biomass accumulation. Additionally, a mapping population of 187 recombinant inbred lines (RILs) derived from a cross between Zong3 and 87-1 was constructed to identify quantitative trait loci (QTL) responsible for physiological traits associated with seedling water stress. Leaf temperature differences (LTD) and the drought tolerance index (DTI) of shoot fresh weight (SFW) and shoot dry weight (SDW) were the traits evaluated for QTL analysis in maize seedlings. A total of nine QTL were detected by composite interval mapping (CIM) for the three traits (LTD, RSFW and RSDW). Two co-locations responsible for both RSFW and RSDW were detected on chromosomes 1 and 2, respectively, which showed common signs with their trait correlations. Another co-location was detected on chromosome 9 between LTD and shoot biomass, which provided genetic evidence that leaf temperature affects biomass accumulation. Additionally, the utility of a thermography system for drought tolerance breeding in maize was discussed.     

Mapping of post-flowering drought resistance traits in grain sorghum: association between QTLs influencing premature senescence and maturity

The identification of genetic factors underlying the complex responses of plants to drought stress provides a solid basis for improving drought resistance. The stay-green character in sorghum (Sorghum bicolor L. Moench) is a post-flowering drought resistance trait, which makes plants resistant to premature senescence under drought stress during the grainfilling stage. The objective of this study was to identify quantitative trait loci (QTLs) that control premature senescence and maturity traits, and to investigate their association under post-flowering drought stress in grain sorghum. A genetic linkage map was developed using a set of recombinant inbred lines (RILs) obtained from the cross B35 × Tx430, which were scored for 142 restriction fragment length polymorphism (RFLP) markers. The RILs and their parental lines were evaluated for post-flowering drought resistance and maturity in four environments. Simple interval mapping identified seven stay-green QTLs and two maturity QTLs. Three major stay-green QTLs (SGA, SGD and SGG) contributed to 42% of the phenotypic variability (LOD 9.0) and four minor QTLs (SGB, SGI.1, SGI.2, and SGJ) significantly contributed to an additional 25% of the phenotypic variability in stay-green ratings. One maturity QTL (DFB) alone contributed to 40% of the phenotypic variability (LOD 10.0), while the second QTL (DFG) significantly contributed to an additional 17% of the phenotypic variability (LOD 4.9). Composite interval mapping confirmed the above results with an additional analysis of the QTL × Environment interaction. With heritability estimates of 0.72 for stay-green and 0.90 for maturity, the identified QTLs explained about 90% and 63% of genetic variability for stay-green and maturity traits, respectively. Although stay-green ratings were significantly correlated (r=0.22, P ≤ 0.05) with maturity, six of the seven stay-green QTLs were independent of the QTLs influencing maturity. Similarly, one maturity QTL (DFB) was independent of the stay-green QTLs. One stay-green QTL (SGG), however, mapped in the vicinity of a maturity QTL (DFG), and all markers in the vicinity of the independent maturity QTL (DFB) were significantly (P ≤ 0.1) correlated with stay-green ratings, confounding the phenotyping of stay-green. The molecular genetic analysis of the QTLs influencing stay-green and maturity, together with the association between these two inversely related traits, provides a basis for further study of the underlying physiological mechanisms and demonstrates the possibility of improving drought resistance in plants by pyramiding the favorable QTLs. Received: 10 October 1998 / Accepted: 12 July 1999     

水稻苗期生长对缺磷响应的QTL定位(英文)

缺磷是抑制全球水稻产量主要因素之一。本研究利用Asomonori(粳型)/IR24(籼型)杂交重组自交株系,对5个水稻苗期性状(相对苗高、相对根长、相对根重、相对苗重以及相对总重)在缺磷条件下的响应QTL进行定位。共检测到20个水稻苗期生长对缺磷响应的QTL位点,分别位于第1(4QTLs)、第4(4QTLs)、第5(2QTLs)、第7、第8(4QTLs)、第9(2QTLs)、第11(2QTLs)和第12号染色体上,其中13个QTLs位于与C3029C、XNpb302、C621B、C621C、R2976和C1263分子标记紧密连锁的6个基因组区域上。另外,每个性状均能从双亲中检测到正负效应QTL位点,这些能解释重组自交系群体中出现超亲和连续分布的现象。本文主要报道了水稻第5、第7和第11染色体上存在水稻苗期生长对缺磷响应的QTL位点。研究表明,该结果及其中检测到的QTLs两侧的连锁分子标记可用于水稻苗期耐低磷性分子育种。     

Quantitative Trait Loci Mapping of Maize Yield and Its Components Under Different Water Treatments at Flowering Time

Drought or water stress is a serious agronomic problem resulting in maize (Zea mays L.) yield loss throughout the world. Breeding hybrids with drought tolerance is one important approach for solving this problem. However, lower efficiency and a longer period of breeding hybrids are disadvantages of traditional breeding programs. It is generally recognized that applying molecular marker techniques to traditional breeding programs could improve the efficiency of the breeding of drought‐tolerant maize. To provide useful information for use in studies of maize drought tolerance, the mapping and tagging of quantitative trait loci (QTL) for yield and its components were performed in the present study on the basis of the principle of a mixed linear model. Two hundred and twenty‐one recombinant inbred lines (RIL) of Yuyu 22 were grown under both well‐watered and water‐stressed conditions. In the former treatment group, plants were well irrigated, whereas those in the latter treatment group were stressed at flowering time. Ten plants of each genotype were grown in a row that was 3.00 m × 0.67 m (length × width). The results show that a few of the QTL were the same (one additive QTL for ear length, two additive QTL and one pair of epistatic QTL for kernel number per row, one additive QTL for kernel weight per plant), whereas most of other QTL were different between the two different water treatment groups. It may be that genetic expression differs under the two different water conditions. Furthermore, differences in the additive and epistatic QTL among the traits under water‐stressed conditions indicate that genetic expression also differs from trait to trait. Major and minor QTL were detected for the traits, except for kernel number per row, underwater‐stressed conditions. Thus, the genetic mechanism of drought tolerance in maize is complex because the additive and epistatic QTL exist at the same time and the major and minor QTL all contribute to phenotype under water‐stressed conditions. In particular, epidemic QTL under water‐stressed conditions suggest that it is important to investigate the drought tolerance of maize from a genetic viewpoint. (Managing editor: Wei Wang)     

Construction of a SSR-based genetic map and identification of QTL for domestication traits using recombinant inbred lines from a cross between wild and cultivated cowpea (<Emphasis Type="Italic">V. unguiculata</Emphasis> (L.) Walp.)

Cowpea (Vigna unguiculata (L.) Walp.) is a grain legume commonly grown and consumed in many parts of the tropics and subtropics. A genetic linkage map was constructed using simple sequence repeat (SSR) markers and a recombinant inbred (RI) population of159 individuals derived from a cross between the breeding line 524B, a California Blackeye, and 219-01, a perennial wild cowpea from Kenya. Out of 912 primer combinations predicted to amplify SSRs in cowpea, 639 reliably produced amplification products in PCR assays and 202 (31.6%) were polymorphic between the two parents. These polymorphic SSRs were used to construct a genetic map consisting of 11 linkage groups (LGs) spanning 677 cM, with an average distance between markers of 3 cM. Agronomic traits related to domestication (seed weight, pod shattering) were analyzed together with the genotypic data. Six quantitative trait loci (QTL) for seed size were revealed with the phenotypic variation ranging from 8.9 to 19.1%. Four QTL for pod shattering were identified with the phenotypic variation ranging from 6.4 to 17.2%. The QTL for seed size and pod shattering mainly cluster in two areas of LGs 1 and 10, facilitating the use of marker-assisted selection to eliminate undesirable wild phenotypes in breeding activities involving introgression of traits from wild germplasm. The generation of an SSR-based molecular map and additional trait-linked markers also contributes to the expanding tool kit available to cowpea breeders, especially in Africa.     

Identification of molecular markers for aluminium tolerance in diploid oat through comparative mapping and QTL analysis

The degree of aluminium tolerance varies widely across cereal species, with oats (Avena spp.) being among the most tolerant. The objective of this study was to identify molecular markers linked to aluminium tolerance in the diploid oat A. strigosa. Restriction fragment length polymorphism markers were tested in regions where comparative mapping indicated the potential for orthologous quantitative trait loci (QTL) for aluminium tolerance in other grass species. Amplified fragment length polymorphism (AFLP) and sequence-characterized amplified region (SCAR) markers were used to provide additional coverage of the genome. Four QTL were identified. The largest QTL explained 39% of the variation and is possibly orthologous to the major gene found in the Triticeae as well as Alm1 in maize and a minor gene in rice. A second QTL may be orthologous to the Alm2 gene in maize. Two other QTL were associated with anonymous markers. Together, these QTL accounted for 55% of the variation. A SCAR marker linked to the major QTL identified in this study could be used to introgress the aluminium tolerance trait from A. strigosa into cultivated oat germplasm. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users. S. Kibite: In Memoriam     

Identification and characterization of large-effect quantitative trait loci for grain yield under lowland drought stress in rice using bulk-segregant analysis

An F_4:5 population of 490 recombinant inbred lines (RILs) from the cross Apo/^2*Swarna was used to detect quantitative trait loci (QTL) with large effects on grain yield under drought stress using bulk-segregant analysis (BSA). Swarna is an important rainfed lowland rice variety grown on millions of hectares in Asia, but is highly susceptible to drought and aerobic soil conditions. Apo is an aerobic-adapted variety with moderate tolerance to drought. Two rice microsatellite (RM) markers, RM324, and RM416, located on chromosomes 2 and 3, respectively, were shown via BSA to be strongly associated with yield under lowland drought stress. The effects of these QTL were tested in a total of eight hydrological environments over a period of 3 years. The QTL linked to RM416 (DTY _3.1 ) had a large effect on grain yield under severe lowland drought stress, explaining about 31% of genetic variance for the trait (P < 0.0001). It also explained considerable variance for yield under mild stress in lowland conditions and aerobic environments. To our knowledge this is the first reported QTL that has a large effect on yield in both lowland drought and aerobic environments. The QTL linked to RM324 (DTY _2.1 ) had a highly significant effect on grain yield in lowland drought stress (R ² = 13–16%) and in two aerobic trials. The effect of these QTL on grain yield was verified to be not mainly due to phenology differences. Effects of DTY _3.1 on yield under stress have been observed in several other rice mapping populations studied at IRRI. Results of this study indicate that BSA is an effective method of identifying QTL alleles with large effects on rice yield under severe drought stress. The Apo alleles for these large-effect QTL for grain yield under drought and aerobic conditions may be immediately exploited in marker-assisted-breeding to improve the drought tolerance of Swarna.