Novel Fatty Acid Modifications of Transportan 10

Cell-penetrating peptides (CPPs) are able to efficiently internalize into cells and can therefore be used as vectors for non-viral cellular delivery of different cargoes. Previous studies have shown that hydrophobic modifications of different CPPs can increase their transfection efficiency dramatically. In this study we have modified the cell penetrating-peptide transportan 10 (TP10) with a variety of hydrophobic molecules to determine the role of hydrophobicity in the uptake of these molecules. The results can be used to synthesize more efficient delivery vectors. To evaluate how these constructs are able to transport cargoes into cells we used 2′-OMe splice correcting oligonucleotides. Non-covalent peptide-cargo complexes were formed and their transfection efficiency was measured using a luciferase readout system. The hydrophobicity of the novel modifications was correlated with their biological efficacy. We determined the most efficient range of hydrophobicity for TP10 analogs for delivering oligonucleotides into cells. In order to assess how the transfection efficacy of these particles is dependent on their size the hydrodynamic diameter of the formed nanoparticles was measured using dynamic light scattering. These findings will be used to develop highly efficient non-viral gene therapy vectors.     

Synthesis and characterization of positively charged porphyrin-peptide conjugates

The total syntheses of 14 porphyrin conjugates containing one to four positively charged amino acids and two distinct linkers are described. All conjugates were fully characterized using spectroscopic methods, and the X-ray structure of a porphyrin isothiocyanate precursor was obtained. In vitro studies using HEp2 cells show that these conjugates have low cytotoxicity (IC50 > 250 microM) and that the extent of their cellular uptake depends significantly on the number, nature, and sequence of amino acids in the peptide, and on the presence of a centrally chelated metal ion. Metal-free conjugates bearing three consecutive arginine residues accumulated the most within cells. On the other hand, the preferential sites of subcellular localization were found to be independent from the number, nature, and sequence of amino acids in the conjugate, the linker, and coordinated metal ion; it is suggested, based on theoretical calculations, that the peptides in these conjugates fold over the porphyrin macrocycle in order to maximize intramolecular hydrophobic interactions.     

Multivariate design and evaluation of a set of RGRPQ-derived innate immunity peptides

Oral commensal Streptococcus gordonii proteolytically cleave the salivary PRP-1 polypeptide into an RGRPQ innate peptide. The Arg and Gln termini are crucial for RGRPQ-mediated ammonia production and proliferation by S. gordonii SK12 and adhesion inhibition and desorption by Actinomyces naeslundii T14V, respectively. Here we have applied (i) a multivariate approach using RGRPQ-related peptides varied at amino acids 2, 3, and 4 simultaneously and (ii) size and N- and C-terminal modifications of RGRPQ to generate structure activity information. While the N-terminal arginine motif mediated ammonia production independent of peptide size, other responses required more or less full-length peptide motifs. The motifs for adhesion inhibition and desorption were the same. The adhesion and proliferation motifs required similarly a hydrophobic/low polarity amino acid 4 but differentially a hydrophilic or hydrophobic character of amino acids 2/3, respectively; polar peptides with small/hydrophilic and hydrophilic amino acids 2 and 3, respectively, had high adhesion inhibition/desorption activity, and lipophilic peptides with large/hydrophobic amino acids 2 and 3 had high proliferation activity. Accordingly, while RIWWQ had increased proliferation but abolished adhesion/desorption activity, peptides designed with hydrophilic amino acids 2 and 3 were predicted to behave in the opposite way. Moreover, a RGRPQ mimetic for all three responses should mimic small hydrophilic, large nitrogen-containing, and hydrophobic/low polarity amino acids 2, 3, and 4, respectively. Peptides fulfilling these criteria were 1-1.6-fold improved in all three responses. Thus, both mimetics and peptides with differential proliferation and adhesion activities may be generated for evaluation in biofilm models.     

Linkers for improved cleavage of fusion proteins with an engineered alpha-lytic protease.

Addition of an N-terminal fusion partner can greatly aid the expression and purification of a recombinant protein in Escherichia coli. We investigated two genetically engineered proteases designed to remove the fusion partner after the protein of interest has been expressed. Recombinant human insulin-like growth factor-II (hIGF-II) has been produced from E. coli-derived fusion proteins using a novel enzymatic cleavage system that uses a mutant of alpha-lytic protease. Initially, two potential fusion protein linkers were designed, Pro-Ala-Pro-His (PAPH) and Pro-Ala-Pro-Met (PAPM), and were tested as substrates in the form of synthetic dodecapeptides. Using mass spectrometry and reverse-phase HPLC, the position of cleavage was confirmed and the kinetics of synthetic peptide cleavage were examined. Use of the linkers in hIGF-II fusion proteins produced in E. coli was then evaluated. The fusion proteins constructed consist of the first 11 amino acids of porcine growth hormone linked N-terminally to hIGF-II by six amino acids that include the dipeptide Val-Asn followed by a variable tetrapeptide protease cleavage motif. Mass spectrometry and N-terminal sequencing confirmed that proteolytic cleavage of the fusion proteins had occurred at the predicted sites. Using the fusion proteins as substrates, the cleavage of the rationally designed motifs by the alpha-lytic protease mutant was compared. The fusion protein containing the motif PAPM had a k(cat)/K(M) ratio indicating a 1.6-fold preference over the PAPH fusion protein for cleavage by this enzyme. Furthermore, when hIGF-II fusion proteins containing the designed cleavable linkers were processed with the engineered alpha-lytic protease, they gave greatly improved yields of native hIGF-II compared to an analogous fusion protein cleaved by H64A subtilisin. Comparison of the peptide and protein cleavage studies shows that the efficient proteolysis of the cleavage motifs is an inherent property of the designed sequences and is not determined by secondary or tertiary structure in the fusion proteins.     

The twin arginine consensus motif of Tat signal peptides is involved in Sec-independent protein targeting in Escherichia coli

In Escherichia coli a subset of periplasmic proteins is exported through the Tat pathway to which substrates are directed by an NH(2)-terminal signal peptide containing a consensus SRRXFLK "twin arginine" motif. The importance of the individual amino acids of the consensus motif for in vivo Tat transport has been assessed by site-directed mutagenesis of the signal peptide of the Tat substrate pre-SufI. Although the invariant arginine residues are crucial for efficient export, we find that slow transport of SufI is still possible if a single arginine is conservatively substituted by a lysine residue. Thus, in at least one signal peptide context there is no absolute dependence of Tat transport on the arginine pair. The consensus phenylalanine residue was found to be a critical determinant for efficient export but could be functionally substituted by leucine, another amino acid with a highly hydrophobic side chain. Unexpectedly, the consensus lysine residue was found to retard Tat transport. These observations and others suggest that the sequence conservation of the Tat consensus motif is a reflection of the functional importance of the consensus residues. Tat signal peptides characteristically have positively charged carboxyl-terminal regions. However, changing the sign of this charge does not affect export of SufI.     

Modified branched peptides with a histidine-rich tail enhance in vitro gene transfection

Successful gene therapy depends on the development of efficient, non-toxic gene delivery systems. To accomplish this objective, our laboratory has focused on solid-phase synthesized peptide carriers, in which the amino acid sequence can be varied precisely to augment intracellular DNA transport. We previously determined that linear and branched co-polymers of histidine and lysine in combination with liposomes enhanced the efficiency of gene transfection. In this study, we have modified two branched histidine-lysine (HK) peptides by adding a histidine-rich tail. In a variety of cell lines, this histidine-rich tail markedly improved transfection efficiency, presumably by increasing the buffering capacity of the polymer. One polymer with a histidine-rich tail, H²K4bT, compared favorably with the commonly used transfection agents. Together with modification of our transfection protocol, these improved HK peptides alone, without liposomes, are the effective carriers of plasmids into a variety of cells. We anticipate that branched HK peptides will continue to be developed as carriers of nucleic acids for in vitro and in vivo applications.     

Aluminum- and mild steel-binding peptides from phage display

Using a phage library displaying random peptides of 12 amino acids on its surface, several peptides were found that bind to aluminum and mild steel. Like other metal-binding peptides, no obvious consensus motif has been found for these peptides. However, most of them are rich in hydroxyl-containing amino acids, serine or threonine, or contain histidine. For the aluminum-binding peptides, peptides with a higher number of hydroxyl-containing amino acids bind to the aluminum surface more tightly. For example, Val-Pro-Ser-Ser-Gly-Pro-Gln-Asp-Thr-Arg-Thr-Thr, which contains five hydroxyl-containing amino acid residues, was selected four-fold more frequently than a peptide containing only one serine, suggesting an important role for the hydroxyl-containing amino acids in the metal–peptide interaction.     

Automatic Edman microsequencing of peptides containing multiple unnatural amino acids

It is now routine using automatic Edman microsequencing to determine the primary structure of peptides or proteins containing natural amino acids; however, a deficiency in the ability to readily sequence peptides containing unnatural amino acids remains. With the advent of synthetic peptide chemistry, combinatorial chemistry, and the large number of commercially available unnatural amino acids, there is a need for efficient and accurate structure determination of short peptides containing many unnatural amino acids. In this study, 35 commercially available alpha-unnatural amino acids were selected to determine their elution profile on an ABI protein sequencer. Using a slightly modified gradient program, 19 of these 35 PTH amino acids can be readily resolved and distinguished from common PTH amino acids at low picomole levels. These unnatural amino acids in conjunction with the 20 natural amino acids can be used as building blocks to construct peptide libraries, and peptide beads isolated from these libraries can be readily microsequenced. To demonstrate this, we synthesized a simple tripeptide "one-bead one-compound" combinatorial library containing 14 unnatural and 19 natural amino acids and screened this library for streptavidin-binding ligands. Microsequencing of the isolated peptide-beads revealed the novel motif Bpa-Phe(4-X)-Aib, wherein X = H, OH, and CH3.     

Bulky aromatic amino acids increase the antibacterial activity of 15-residue bovine lactoferricin derivatives.

A model peptide, FKCRRWQWRMKKLGA, residues 17-31 of bovine lactoferricin, has been subjected to structure-antibacterial activity relationship studies. The two Trp residues are very important for antibacterial activity, and analogue studies have demonstrated the significance of the size, shape and aromatic character of the side chains. In the current study we have replaced Trp residues in the model peptide with bulky aromatic amino acids to elucidate further the importance of size and shape. The counterproductive Cys residue in position 3 was also replaced by these aromatic amino acids. The largest aromatic amino acids employed resulted in the most active peptides. The peptides containing these hydrophobic residues were generally more active against Staphylococcus aureus than against Escherichia coli, indicating that the bacterial specificity as well as the antibacterial efficiency can be altered by employing large hydrophobic aromatic amino acid residues.     

Effect of multiple aliphatic amino acids substitutions on the structure, function, and mode of action of diastereomeric membrane active peptides

The initial stages leading to the binding and functioning of membrane-active polypeptides including hormones, signal sequences, and lytic peptides are mainly governed by electrostatic attraction and hydrophobic partitioning between water and lipid bilayers. Antimicrobial peptides serve as an important model for studying the details of these initial steps. However, a systematic analysis of the contribution of multiple hydrophobic amino acids to these steps have been hindered by the propensity of many peptides to aggregate and become inactivated in solution. To this end, we synthesized a series of model amphipathic all L-amino acid peptides and their diastereomers with the sequence KX(3)KWX(2)KX(2)K, where X = Gly, Ala, Val, Ile, or Leu. The effect of the aliphatic amino acids on the biological activity, binding, structure, membrane localization, and mode of action of these peptides was investigated. Most of the L-amino acid peptides oligomerized and adopted distinct structures in solution and in a membrane mimetic environment. Among this group only the Leu containing peptide was hemolytic and highly active on most bacteria tested. The Val- and Leu-containing peptides were hemolytic but inactive toward most bacteria tested. In contrast, the diastereomeric peptides were monomeric and unstructured in solution, but they adopted distinct structures upon membrane binding. While hemolytic activity was drastically reduced, the spectrum of antibacterial activity was preserved or increased. Importantly, we found a direct correlation with the diastereomers between hydrophobicity and propensity to form a helical/distorted-helix and activity (induced membrane leakage and antibacterial activity), despite the fact that they contained 30% D-amino acids. Furthermore, efficient increase in membrane permeability can proceed through different mechanisms. Specifically, the Leu-containing diastereomeric peptide micellized vesicles and possibly bacterial membranes while the Ile-containing diastereomeric peptide fused model membranes and irregularly disrupted bacterial membranes.     

Basic peptide system for efficient delivery of foreign genes

Certain peptides containing high percentage of cationic amino acids are known to efficiently translocate through the cell membrane. This principle was previously exploited for delivery of variety proteins. We had observed that various basic peptides of earlier studies, though not specifically use for gene delivery, contain DNA or RNA binding domains. In the present study, we reported on arginine peptides, which form DNA complexes that efficiently transfect various cell lines. The transfection abilities of the peptides were observed by green fluorescent protein (GFP) and beta-galactosidase gene expression in 293T, HeLa, Jurkat, and COS-7 cells. We found superior transfection activity of arginine peptides compared with commercially available efficient transfection agents. The expression of marker genes induced by arginine peptides was partially inhibited in the presence of heparan sulfate, chondroitin sulfate B and C, or both heparinase III and chondroitinase ABC. The transfection proficiency of these peptides was affected by endosomotropic reagent as well as low temperature (4 degrees C). Finally, we have investigated the potential of arginine peptides as a delivery agent for gene therapy, by attempting to deliver herpes simplex virus thymidine kinase (HSV-TK) gene into tumor cells. HSV-TK transfected tumor cells exhibited sensitivity to the antiviral drug ganciclovir (GCV), leading to cell death. Taken together, these data demonstrate that arginine peptide is proficient for transfection, indicating its potentially benefit to studies in gene therapy and gene delivery in a range of model organisms.     

Genetic Selection of Poliovirus 2Apro-Binding Peptides

The yeast two-hybrid system has been used to identify mammalian clones that interact with poliovirus 2A proteinase (2A^pro). Eight clones which encode previously unidentified human proteins were selected from a HeLa cell cDNA expression library. In addition, five clones encoding short peptides that interact with poliovirus 2A^pro were also identified. The lengths of these peptides range from 6 to 30 amino acids, but all of them contain the Leu-X-Thr-Z motif (X represents any amino acid; Z represents a hydrophobic residue). This sequence is invariably located just at the carboxy terminus of each peptide. This approach raises the possibility of designing substrate analogue inhibitors of 2A^pro. Thus, two nonhydrolyzable peptides containing the Leu-X-Thr-Z motif prevented cleavage of eukaryotic initiation factor 4G by poliovirus 2A^pro in vitro. A more general method for identifying peptides with antiproteinase activity is discussed.     

A cleavage method which minimizes side reactions following Fmoc solid phase peptide synthesis

The success of solid phase peptide synthesis utilizing 9-fluorenylmethoxycarbonyl (Fmoc) amino acids is often limited by deleterious side reactions which occur during TFA peptide-resin cleavage and side-chain deprotection. The majority of these side reactions modify susceptible residues, such as Trp, Tyr, Met, and Cys, with TFA-liberated side-chain protecting groups and linkers. The purpose of this study was to assess the relative effectiveness of various scavengers in suppressing these side reactions. We found that the cleavage mixture 82.5% TFA : 5% phenol : 5% H2O : 5% thioanisole : 2.5% EDT (Reagent K) was maximally efficient in inhibiting a great variety of side reactions. Synthesis and cleavage of 10 peptides, each containing 20-50 residues, demonstrated the complementarity of Fmoc chemistry with Reagent K for efficient synthesis of complex peptides.     

Caveolin scaffolding region and cholesterol-rich domains in membranes

A protein that constitutes a good marker for a type of cholesterol-rich domain in biological membranes is caveolin. A segment of this protein has a sequence that corresponds to a cholesterol recognition/interaction amino acid consensus (CRAC) motif; this motif has been suggested to cause the incorporation of proteins into cholesterol-rich domains. We have studied the interaction of two peptides containing the CRAC motif of caveolin-1 by differential scanning calorimetry, fluorescence, circular dichroism and magic angle spinning NMR. These peptides promote the segregation of cholesterol into domains from mixtures of the sterol with phosphatidylcholine, as shown by depletion of cholesterol from a portion of the membrane and enrichment of cholesterol in another domain. Cholesterol passes its solubility limit in the cholesterol-rich domain, resulting in the formation of cholesterol crystallites, suggesting that not all of the cholesterol recruited to this domain is bound to the peptide. NMR studies show that the peptides insert somewhat more deeply into membranes when cholesterol is present, but their strongest interaction takes place with the interfacial region of the membrane. We conclude that the peptides we studied containing CRAC sequences are more effective in promoting the formation of cholesterol-rich domains than are shorter peptides of this region of caveolin, which although they contain several aromatic amino acids, they have no CRAC motif. The presence or absence of a CRAC motif, however, is not a sufficient criterion to determine the extent to which a protein will promote the segregation of cholesterol in membranes.     

Amphipathic alpha-helices in proteins: results from analysis of protein structures

Amphipathic alpha-helices play a crucial role in mediating the interaction of peptides and proteins with membranes. We have analyzed protein structures for the occurrence of 18-residue amphipathic helices. We find several of these alpha-helices having average hydrophobic moments and average hydrophobicities that would favor their interaction with membranes. We have analyzed the distribution of net charge, helix length, normalized frequency of occurrence, and propensities of the 20 amino acids in the delineated 18-residue helices. We have observed distinct differences in the frequencies of occurrence of polar and hydrophobic amino acids at positions 1-18 in amphipathic and nonamphipathic helices. There are also differences in propensities of the 20 amino acids to occur at positions 1-18 of amphipathic and nonamphipathic helices. Synthetic peptides corresponding to some of these surface-seeking helices do possess antibacterial and/or hemolytic activities. Knowledge of the distribution of charges in 18-residue surface-seeking amphipathic alpha-helices, as well as propensity of occurrence of amino acids at various positions, would be useful inputs in the de novo design of amphipathic peptides.     

Stable proline box motif at the N-terminal end of alpha-helices.

We describe a novel N-terminal alpha-helix local motif that involves three hydrophobic residues and a Pro residue (Pro-box motif). Database analysis shows that when Pro is the N-cap of an alpha-helix the distribution of amino acids in adjacent positions changes dramatically with respect to the average distribution in an alpha-helix, but not when Pro is at position N1. N-cap Pro residues are usually associated to Ile and Leu, at position N', Val at position N3 and a hydrophobic residue (h) at position N4. The side chain of the N-cap Pro packs against Val, while the hydrophobic residues at positions N' and N4 make favorable interactions. To analyze the role of this putative motif (sequence fingerprint hPXXhh), we have synthesized a series of peptides and analyzed them by circular dichroism (CD) and NMR. We find that this motif is formed in peptides, and that the accompanying hydrophobic interactions contribute up to 1.2 kcal/mol to helix stability. The fact that some of the residues in this fingerprint are not good N-cap and helix formers results in a small overall stabilization of the alpha-helix with respect to other peptides having Gly as the N-cap and Ala at N3 and N4. This suggests that the Pro-box motif will not specially contribute to protein stability but to the specificity of its fold. In fact, 80% of the sequences that contain the fingerprint sequence in the protein database are adopting the described structural motif, and in none of them is the helix extended to place Pro at the more favorable N1 position.     

Target recognition of apocalmodulin by nitric oxide synthase I peptides

An increasing number of proteins are found that are regulated by the Ca(2+)-free state of calmodulin, apocalmodulin. Many of these targets harbor a so-called IQ motif within their primary sequence, but several target proteins of apocalmodulin lack this motif. We investigated whether the Ca(2+)-dependent calmodulin-binding site of nitric oxide synthase I could be transformed into a target site of apocalmodulin. Synthetic peptides representing the wild-type amino acid sequence and several peptides carrying mutations were studied by isothermal titration calorimetry and fluorescence spectroscopy. A single amino acid substitution of a negative charge to a positive charge can convert a classical Ca(2+)-dependent binding site of calmodulin into a target site for apocalmodulin. In addition, the introduction of hydrophobic amino acids increases the apparent binding affinity from the micromolar to the nanomolar range. Binding of wild-type and mutant peptides to Ca(2+)-calmodulin was enthalpically driven, and binding to apocalmodulin was entropically driven. Our data indicate that only a few selected amino acid positions in a calmodulin-binding site determine its Ca(2+) dependency.     

Lipophilic peptides for gene delivery

DNA transfections are widely performed in research laboratories and in vivo gene delivery holds the promise for curing many diseases. The synthetic carriers or vectors for DNA are typically cationic lipids. However, in biology, the recognition of nucleic acids by proteins involves both electrostatic and stacking contributions. As such we have prepared a series of new lipophilic peptide vectors that possess lysine and tryptophan amino acids for evaluation. These lipophilic peptides show minimal cytotoxicity and enhanced in vitro gene transfection activity.     

A review of adsorption of amino acids on minerals: Was it important for origin of life?

Minerals more readily adsorb amino acids with charged R groups than uncharged R groups, so that the incorporation of amino acids with charged R groups into peptides would be more frequent than for amino acids with uncharged R groups. However, 74% of the amino acids in the proteins of modern organisms contain uncharged R groups. Thus, what could have been the mechanisms that produced peptides/proteins with more amino acids with uncharged R groups than precursors with charged R groups? Should we expect the composition of amino acids adsorbed on minerals to be similar to those of present proteins? Was the adsorption of amino acids on minerals important for the origin of life? The lipid world offers an alternative view of origin of life. Liposomes contributed to elongation of peptides as well as select hydrophobic amino acids and peptides. These experiments could be showing the mechanism, which hydrophobic amino acids have been selected. However, liposomes have no influence on the stereoselectivity in the oligomerization of amino acids. In the present paper, several other mechanisms are also discussed that could produce peptides with a greater proportion of amino acids with uncharged R groups.     

Genetic Code Evolution Started with the Incorporation of Glycine,Followed by Other Small Hydrophilic Amino Acids

We propose that glycine was the first amino acid to be incorporated into the genetic code, followed by serine, aspartic and/or glutamic acid—small hydrophilic amino acids that all have codons in the bottom right-hand corner of the standard genetic code table. Because primordial ribosomal synthesis is presumed to have been rudimentary, this stage would have been characterized by the synthesis of short, water-soluble peptides, the first of which would have comprised polyglycine. Evolution of the code is proposed to have occurred by the duplication and mutation of tRNA sequences, which produced a radiation of codon assignment outwards from the bottom right-hand corner. As a result of this expansion, we propose a trend from small hydrophilic to hydrophobic amino acids, with selection for longer polypeptides requiring a hydrophobic core for folding and stability driving the incorporation of hydrophobic amino acids into the code.