Binding properties of a monoclonal antibody directed toward lead-chelate complexes

A monoclonal antibody (2C12) that recognizes a Pb(II)-cyclohexyldiethylenetriamine pentaacetic acid complex was produced by the injection of BALB/c mice with a Pb(II)-chelate complex covalently coupled to a carrier protein. The ability of purified antibody to interact with a variety of metal-free chelators and metal-chelate complexes was assessed by measuring equilibrium dissociation constants. The antibody bound to metal-free trans-cyclohexyldiethylenetriamine pentaacetic acid (CHXDTPA) with an equilibrium dissociation constant of 2.3 x 10(-)(7) M. Addition of Pb(II) increased the affinity of the antibody for the complex by 25-fold; Pb(II) was the only metal cation (of 15 different di-, tri-, and hexavalent metals tested) that increased the affinity of the antibody for CHXDTPA. The increased affinity was due primarily to an increase in the association rate constant. The antibody also had the ability to interact with ethylenediamine tetraacetic acid (EDTA), diethylenetriamine pentaacetic acid (DTPA), and structurally related derivatives, but with affinities from 50- to 10000-fold less than that determined for CHXDTPA. Addition of metals to EDTA-based chelators reduced the affinity of the antibody for these ligands. However, when DTPA was used as the chelator, addition of Pb(II) increased the affinity of the antibody for the complex by 200-fold. The sensitivity of prototype immunoassays for Pb(II) could be modulated by changing the structure of the immobilized metal-chelate complex and/or the soluble chelator used to complex Pb(II) in the test solution.     

Allosteric binding properties of a monoclonal antibody and its Fab fragment

Detailed equilibrium binding studies were conducted on a monoclonal antibody directed against Pb(II) complexed with a protein conjugate of diethylenetriaminepentaacetic acid (DTPA). Binding curves obtained with DTPA and a cyclohexyl derivative of DTPA in the presence and absence of metal ions were consistent with the anticipated one-site homogeneous binding model. Binding curves obtained with aminobenzyl-DTPA or its complexes with Ca(II), Sr(II), and Ba(II) were highly sigmoidal, characterized by Hill coefficients of 2.3-6.5. Binding curves obtained with the Pb(II) and In(III) complexes of aminobenzyl-DTPA were hyperbolic, but in each case the apparent affinity of the antibody for the chelator-metal complex was higher in the presence of excess chelator than it was in the presence of excess metal ion. In the presence of excess chelator, the equilibrium dissociation constant for the binding of aminobenzyl-DTPA-Pb(II) to the antibody was 9.5 x 10(-)(10) M. Binding curves obtained with the Hg(II) and Cd(II) complexes of aminobenzyl-DTPA were biphasic, indicative of negative cooperativity. Further binding studies demonstrated that aminobenzyl-DTPA-Hg(II) opposed the binding of additional chelator-metal complexes to the antibody more strongly than did aminobenzyl-DTPA-Cd(II). The Fab fragment differed from the intact antibody only in that the apparent affinity of the Fab was generally lower for a given chelator-metal complex. These data are interpreted in terms of a model in which (i) aminobenzyl-DTPA and its complexes bind both to the antigen binding site and to multiple charged sites on the surface of the compact immunoglobulin; and (ii) the bound, highly charged ligands interact in a complicated fashion through the apolar core of the folded antibody.     

Antibody-based sensors for heavy metal ions

Competitive immunoassays for Cd(II), Co(II), Pb(II) and U(VI) were developed using identical reagents in two different assay formats, a competitive microwell format and an immunosensor format with the KinExA™ 3000. Four different monoclonal antibodies specific for complexes of EDTA–Cd(II), DTPA–Co(II), 2,9-dicarboxyl-1,10-phenanthroline–U(VI), or cyclohexyl–DTPA–Pb(II) were incubated with the appropriate soluble metal–chelate complex. In the microwell assay format, the immobilized version of the metal–chelate complex was present simultaneously in the assay mixture. In the KinExA format, the antibody was allowed to pre-equilibrate with the soluble metal-chelate complex, then the incubation mixture was rapidly passed through a microcolumn containing the immobilized metal-chelate complex. In all four assays, the KinExA format yielded an assay with 10–1000-fold greater sensitivity. The enhanced sensitivity of the KinExA format is most likely due to the differences in the affinity of the monoclonal antibodies for the soluble versus the immobilized metal–chelate complex. The KinExA 3000 instrument and the Cd(II)-specific antibody were used to construct a prototype assay that could correctly assess the concentration of cadmium spiked into a groundwater sample. Mean analytical recovery of added Cd(II) was 114.25±11.37%. The precision of the assay was satisfactory; coefficients of variation were 0.81–7.77% and 3.62–14.16% for within run and between run precision, respectively.     

Optimization of a mouse recombinant antibody fragment for efficient production from Escherichia coli

A mutagenized mouse recombinant antibody fragment (rFab) that recognized HIV capsid protein was isolated from Escherichia coli at a level of 12 mg per liter of culture using standard shake flask methods. This is one of the highest yields of a modified antibody fragment obtained using non-fermentor-based methods. Recombinant Fab was isolated directly from the culture medium, which lacked complex materials such as tryptone and yeast extract. Fab isolated from the periplasm was not as homogeneous as that isolated directly from the culture medium. Optimization of the culture medium using recently developed media, the use of E. coli cell lines that contained rare tRNA codons, and mutagenesis of the Fab to improve the stability of the Fab were important factors in producing high-levels of the Fab. An isolation protocol easily adaptable to automation using a thiophilic-sepharose column followed by metal-chelate chromatography and the introduction of a non-traditional metal binding site for metal-chelate purification that bypasses the conventional hexahistidine tag cleavage step (to prevent the purification tag from interfering with crystallization) are additional features of this approach to produce a highly homogenous preparation of rFab. The resulting rFab binds to its antigen, p24, equivalent in character to the monoclonal from which the rFab was originally derived.     

A trivalent anti-erbB2/anti-CD16 bispecific antibody retargeting NK cells against human breast cancer cells

Bispecific antibody (BsAb) can physically cross-link immune cells to tumor cells, circumventing the proper structures for tumor cell-immune cell interactions and activating the cellular cytotoxic mechanisms. The optimal BsAb should target tumor cells with high affinity, but activate trigger molecules on cytotoxic cells by monovalent binding of Fab fragments. In the present study, a trivalent anti-erbB2/anti-CD16 BsAb was produced. This BsAb possesses bivalent arms specifically binding to the extracellular domain of erbB2 and monovalent Fab fragment redirecting NK cells. The recombinant protein could be expressed and purified from Escherichia coli as native proteins without refolding. It was fully functional in bispecific binding to SKBR3 and NK cells. The molecular size of this trivalent BsAb protein is larger than diabody and smaller than whole antibody and expected to have advantages for both high penetration of small antibody fragments and the slow circulation clearance of whole antibody. This novel protein may be an attractive target for further improvement and evaluation.     

Co-activation of antibody-responsive, enzymatic sensors by a recombinant scFv antibody fragment produced in E. coli

The biophysical nature of the signal transduction in enzymatic biosensors through which the paratope-epitope interaction enhances enzyme activity, is essentially unknown. Fab fragments of efficiently activating antibodies are, in general, poor sensor activators suggesting that the bivalent antibody binding could contribute to the sensing process. We have cloned and produced in E. coli a recombinant SD6 scFv fragment directed against a sensing peptide, displayed on a model -galactosidase-based biosensor. While the enzymatic response to scFv-binding is not detectable, the simultaneous presence of scFv and the poorly-activator SD6 Fab fragment results in a non-additive, efficient sensor response, enhancing the enzyme activity up to about 200%. This co-operative effect, which is also observed by combining SD6 scFv and the non-homologous anti-peptide 4C4 Fab, confirms that the enzyme up-regulation requires multiple and probably heterogeneous contacts between the sensor molecule and the analytes, but not necessarily done by bivalent molecular ligands.     

Bivalent monoclonal IgY antibody formats by conversion of recombinant antibody fragments

Monoclonal IgY have the potential to become unique tools for diagnostic research and therapeutic purposes since avian antibodies provide several advantages due to their phylogenetic difference when compared to mammalian antibodies. The mechanism of avian immunoglobulin gene diversification renders chicken an excellent source for the generation of recombinant scFv as well as Fab antibody libraries of high diversity. One major limitation of these antibody fragments, however, is their monovalent format, impairing the functional affinity of the molecules and, thereby, their applicability in prevalent laboratory methods. In this study, we generated vectors for conversion of avian recombinant antibody fragments into different types of bivalent IgY antibody formats. To combine the properties of established mammalian monoclonal antibodies with those of IgY constant domains, we additionally generated bivalent murine/avian chimeric antibody constructs. When expressed in HEK-293 cells, all constructs yielded bivalent disulfide-linked antibodies, which exhibit a glycosylation pattern similar to that of native IgY as assessed by lectin blot analysis. After purification by one step procedures, the chimeric and the entire avian bivalent antibody formats were analyzed for antigen binding and interaction with secondary reagents. The data demonstrate that all antibody formats provide comparable antigen binding characteristics and the well established properties of avian constant domains.     

Linear epitope mapping by native mass spectrometry

The identification of antigenic epitopes is important for the optimization of monoclonal antibodies (mAbs) intended as therapeutic agents. MS has proven to be a powerful tool for the study of noncovalent molecular interactions such as those involved in antibody-antigen (Ab-Ag) binding. In this work, we described a novel methodology for mapping a linear epitope based on direct mass spectrometric measurement of Ab-Ag complexes. To demonstrate the utility of our methodology, we employed two approaches, epitope excision and epitope extraction, to study a model system consisting of a Fab antibody fragment with specificity toward the peptide aβ(1-40). In epitope excision, the Fab and aβ(1-40) complex was treated with proteolytic enzymes and the digested complexes were directly monitored by MS under native conditions. Mass differences between the Fab-aβ complex and the Fab control revealed the size of epitope peptides that were bound to the Fab. Using the epitope extraction approach, aβ(1-40) was first digested by Lys-C, and the fragment containing the epitope was selected by Fab binding. Data analysis allowed mapping of the epitope to aβ(16-27) which is in good agreement with previously unpublished data. The utility of the methodology was demonstrated by elucidating the binding epitopes for two full-length anti-aβ(1-40) mAbs.     

Growth at sub-optimal temperatures allows the production of functional, antigen-binding Fab fragments in Escherichia coli

Expression in Escherichia coli of recombinant genes coding for the kappa-chain and the Fd fragment of an antibody directed against carcinoembryonic antigen gives rise to Fab dimers. These Fab fragments possess antibody activity, as demonstrated by enzyme-linked immunosorbent assay as well as by ligand competition assay. Effective production of soluble Fab in Escherichia coli was achieved by a decrease in the growth temperature. Following a one step purification by anion exchange chromatography, the bacterially-produced Fab retains its activity at 4 degrees C for at least two months. The relatively simple methodology described in this study should be useful for the design and production of antibodies in bacteria.     

Efficient neutralization of foot-and-mouth disease virus by monovalent antibody binding.

Neutralization of an aphthovirus by monovalent binding of an antibody is reported. Foot-and-mouth disease virus (FMDV) clone C-S8c1 was neutralized by monoclonal antibody (MAb) SD6, which was directed to a continuous epitope within a major antigenic site of the G-H loop of capsid protein VP1. On a molar basis, the Fab fragment was at most fivefold less active in neutralization than the intact antibody, and both blocked virus attachment to cells. Neither the antibody nor the Fab fragment caused aggregation of virions, as evidenced by sucrose gradient sedimentation studies of the antibody-virus complex formed at antibody to virion ratios of 1:50 to 1:10,000. The results of neutralization of infectivity and of ultracentrifugation are fully consistent with structural data based on X-ray crystallographic and cryoelectron microscopy studies, which showed monovalent interaction of the antibody with a critical receptor binding motif Arg-Gly-Asp. The conclusions of these neutralization studies are that (i) bivalent binding of antibody is not a requisite for strong neutralization of aphthoviruses and (ii) aggregation of viral particles, which has been proposed to be the dominant neutralization mechanism of antibodies that bind monovalently to virions, is not necessary for the neutralization of FMDV C-S8c1 by MAb SD6.     

Monoclonal antibodies that recognize minimal differences in the three-dimensional structures of metal-chelate complexes

Immunization of BALB/c mice with a cadmium-chelate-protein conjugate resulted in the isolation of two hybridoma cell lines (A4 and E5) that synthesized antibodies with different variable regions, but similar metal-chelate affinity. The ability of these two monoclonal antibodies to interact with 12 different metal-chelate complexes was studied using the KinExA 3000 immunoassay instrument. The two antibodies showed the highest affinity for cadmium and mercury complexes of ethylenediamine N,N,N',N'-tetraacetic acid (EDTA). The E5 antibody bound to EDTA complexes of cadmium and mercury with equilibrium dissociation constants (K(d)) of 1.62 x 10(-)(9) M and 3.64 x 10(-)(9) M, respectively. The corresponding values for the A4 antibody were 14.7 x 10(-)(9) M and 3.56 x 10(-)(9) M. Addition of a cyclohexyl ring to the EDTA backbone increased the affinity of E5 for the metal-chelate haptens, while decreasing the binding of A4 to the same haptens. Based on available crystal structures, molecular models were constructed for five different divalent metal-chelate complexes. The models were compared to determine structural features of the haptens that may influence antibody recognition. Difference distance matrixes were used to identify areas of the metal-chelate haptens that differed in three-dimensional space. Antibody affinity correlated well with the extent of total structural difference for these metal-EDTA complexes.     

Three-dimensional structure of the Fab fragment of a neutralizing antibody to human rhinovirus serotype 2.

The crystal structure of the antigen-binding fragment of a monoclonal antibody (8F5) that neutralizes human rhinovirus serotype 2 has been determined by X-ray diffraction studies. Antibody 8F5, obtained by immunization with native HRV2 virions, cross-reacts with peptides of the viral capsid protein VP2, which contribute to the neutralizing immunogenic site B in this serotype. The structure was solved by the molecular replacement method and has been refined to an R-factor of 18.9% at 2.8 A resolution. The elbow angle, relating the variable and constant modules of the molecule is 127 degrees, representing the smallest elbow angle observed so far in an Fab fragment. Furthermore, the charged residues of the epitope can be well accommodated in the antigen-binding site. This is the first crystal structure reported for an antibody directed against an icosahedral virus.     

Helix-stabilized Fv (hsFv) antibody fragments: substituting the constant domains of a Fab fragment for a heterodimeric coiled-coil domain.

Antibody Fv fragments would in principle be useful for a variety of biotechnological applications because of their small size and the possibility to produce them in relatively large amounts in recombinant form; however, their limited stability is a drawback. To solve this problem, both domains are usually fused via a peptide linker to form a single-chain Fv (scFv) fragment, but in some cases this leads to a dimerization. We present an alternative format for stabilizing antibody Fv fragments. The C(H)1 and C(L) domain of the Fab fragment were replaced with a heterodimeric coiled coil (WinZip-A2B1), which had previously been selected using a protein-fragment complementation assay in Escherichia coli. This new antibody format was termed helix-stabilized Fv fragment (hsFv), and was compared to the corresponding Fv, Fab and single-chain Fv format. Bacterial growth and expression of the hsFv was significantly improved compared to the Fab fragment. The hsFv fragment formed a heterodimer of heavy and light chain with the expected molecular mass, also under conditions where the scFv fragment was predominantly dimeric. The hsFv fragment was significantly more stable than the Fv fragment, and nearly as stable as the scFv fragment under the conditions used (80 nM protein concentration). Thus, the format of a helix-stabilized Fv (hsFv) fragment can be a useful alternative to existing recombinant antibody formats, especially in cases where poor expression of Fab fragments or multimerization of scFv fragments is a problem.     

IgG Fab Fragments Forming Bivalent Complexes by a Conformational Mechanism That Is Reversible by Osmolytes

Generated by proteolytic cleavage of immunoglobulin, Fab fragments possess great promise as blocking reagents, able to bind receptors or other targets without inducing cross-linking. However, aggregation of Fab preparations is a common occurrence, which generates intrinsic stimulatory capacity and thwarts signal blockade strategies. Using a panel of biochemical approaches, including size exclusion chromatography, SDS-PAGE, mass spectrometry, and cell stimulation followed by flow cytometry, we have measured the oligomerization and acquisition of stimulatory capacity that occurs in four monoclonal IgG Fabs specific for TCR/CD3. Unexpectedly, we observed that all Fabs spontaneously formed complexes that were precisely bivalent, and these bivalent complexes possessed most of the stimulatory activity of each Fab preparation. Fabs composing bivalent complexes were more susceptible to proteolysis than monovalent Fabs, indicating a difference in conformation between the Fabs involved in these two different states of valency. Because osmolytes represent a class of compounds that stabilize protein folding and conformation, we sought to determine the extent to which the amino acid osmolyte l-proline might impact bivalent Fab complexation. We found that l-proline (i) inhibited the adoption of the conformation associated with bivalent complexation, (ii) preserved Fab monovalency, (iii) reversed the conformation of preformed bivalent Fabs to that of monovalent Fabs, and (iv) separated a significant percentage of preformed bivalent complexes into monovalent species. Thus, Fab fragments can adopt a conformation that is compatible with folding or packing of a bivalent complex in a process that can be inhibited by osmolytes.     

High level expression of a promising anti-idiotypic antibody fragment vaccine against HIV-1 in Pichia pastoris

We have expressed the anti-idiotypic antibody 3H6 Fab directed against the HIV-1 broadly neutralising antibody 2F5 in methylotrophic yeast Pichia pastoris. The chimeric human/mouse Fab fragment was expressed under control of the inducible AOX1 promoter and secreted via the alpha mating factor leader of Saccharomyces cerevisiae. Bioreactor experiments showed the ability of the recombinant P. pastoris clone to secrete up to 260 mg/L Fab fragment in the culture supernatant during a five days cultivation time. Codon optimisation of the Fab expression cassette gave no further improvement of specific productivity when comparing 12 clones of each construct. The subsequent purification of Fab containing supernatants was done by anion exchange and size-exclusion chromatography with a recovery resulting in 70% of the recombinant protein. For verification of the suitability of the expression system we characterised the expressed protein with respect to both, its specificity and binding affinity and could not detect any significant difference between products from yeast derived and the hybridoma derived product. Finally we tested the implicit requirement of the carbohydrate moiety in the H2 loop of the original 3H6 antibody by introducing an asparagine to alanine replacement and, in a second experiment, inhibition of N-glycosylation by tunicamycin treatment. Biochemical analysis confirmed that the N-glycosylation does not contribute to the binding properties of 3H6.     

人源性抗HBsAg抗体Fab段在酵母中的表达

通过分步整合的方式,将人源性抗乙肝表面抗原（HBsAg）抗体Fab的轻、重链基因分步整合到巴斯德毕赤（Pichia pastoris）酵母GS115菌株的染色体上,经甲醇诱导,成功地分泌表达出抗HBsAg抗体的Fab片段,表达量达50～80mg/L。ELISA结果显示重组酵母分泌表达出的Fab具有较强的结合HBsAg的能力。通过抗Fab的抗体柱亲和层析,纯化出了纯度较高的Fab产品。     

Chromosomes move poleward in anaphase along stationary microtubules that coordinately disassemble from their kinetochore ends

The binding sites on the nicotinic acetylcholine receptor of labels specific for the alpha-, beta-, and delta-subunits were determined by electron image analysis, using tubular crystals of receptors grown from the postsynaptic membranes of Torpedo marmorata electric organ. The labels were alpha-bungarotoxin (which attaches to the acetylcholine binding sites on the pair of alpha-subunits), Fab35 (a monoclonal antibody Fab fragment directed against the main immunogenic region of the alpha-subunit), Fab111 (a monoclonal antibody Fab fragment directed against a cytoplasmic site on the beta-subunit), and wheat germ agglutinin (which binds to N-acetylglucosamine residues on the delta-subunit). These labels, bound to receptors in the crystals, were located by comparing labeled with native structures, averaged in each case over more than 5,000 molecules. From the assignments made, we find that the clockwise arrangement of subunits around the receptor, viewed from the synaptic face, is: alpha, beta, alpha, gamma, and delta; that the main immunogenic region is at (or close to) the side of the alpha-subunit; and that the two acetylcholine binding sites are at the synaptic end of the alpha-subunits, 27-28 A from the central axis and approximately 53 A apart. In the crystal lattice, neighboring molecules are paired so that their delta- and alpha-subunits are juxtaposed, an organization that appears to relate closely to the grouping of receptors in vivo.     

Neutralizing chimeric mouse-human antibodies against Burkholderia pseudomallei protease: expression, purification and characterization

A recombinant Fab monoclonal antibody (Fab) C37, previously obtained by phage display and biopanning of a random antibody fragment library against Burkholderia pseudomallei protease, was expressed in different strains of Escherichia coli. E. coli strain HB2151 was deemed a more suitable host for Fab expression than other E. coli strains when grown in media supplemented with 0.2 % glycerol. The expressed Fab fragment was purified by affinity chromatography on a Protein G-Sepharose column, and the specificity of the recombinant Fab C37 towards B. pseudomallei protease was proven by Western blotting, enzyme-linked immunosorbent assay (ELISA) and by proteolytic activity neutralization. In addition, polyclonal antibodies against B. pseudomallei protease were produced in rabbits immunized with the protease. These were isolated from high titer serum by affinity chromatography on recombinant-Protein A-Sepharose. Purified polyclonal antibody specificity towards B. pseudomallei protease was proven by Western blotting and ELISA.     

Activation of the first component of human complement, C1, by monoclonal antibodies directed against different domains of subcomponent C1q

Two monoclonal antibodies directed against C1q, and their (Fab)2 and Fab fragments, were used to study the mechanism of C1 activation. Monoclonal antibody 2A10, an IgG2a, was digested by pepsin to yield fully immunoreactive (Fab')2. Monoclonal antibody 1H11, an IgG1, was digested by papain to yield fully immunoreactive, bivalent (Fab)2. Previously 1H11 had been shown to bind to the C1q "heads," whereas 2A10 bound to stalks. Activation of C1 was followed by the cleavage of 125I-C1s in the presence of C1 inhibitor (C1-Inh) at 37 degrees C. Spontaneous activation was minimal at inhibitor concentrations above 0.4 micron (1.3 X physiologic inhibitor concentration); all results were corrected for the spontaneous activation background. Heat-aggregated IgG activated completely in this system and was taken as 100% activation. Monoclonal antibody 2A10 caused precipitation of C1 and slow activation; neither the (Fab')2 nor the Fab' derived from 2A10-caused activation. Probably, aggregates of intact 2A10 and C1 were serving as immune complexes to activate other molecules of C1. In contrast, both 1H11 and its (Fab)2 activated completely and stoichiometrically; that is, maximal activation was achieved at a ratio of one C1q head to one antibody combining site. The monovalent Fab derived from 1H11 bound well to C1q, but no activation of C1 was observed. Thus, bivalent binding of this head-binding monoclonal is required for C1 activation, but not the presence of the antibody Fc portion. Neither 1H11 nor its (Fab)2 fragments caused C1 precipitation; however, the 1H11 did form complexes composed of two C1q cross-linked by multiple 1H11, which were visualized by electron microscopy. The presence of these dimeric complexes correlated well with activation. A model for C1 activation is proposed in which two C1q subcomponents are held together by multiple (Fab)2 bridging C1q heads. The model is roughly analogous to touching opposing pairs of fingers and thumb tips, the two hands representing the two C1q, forming a cage. C1-Inh, which probably binds to C1r through the open end of the C1 cone, is too long asymmetric to be included within the cage. Thus, according to this model, the dimers of C1 are released from the inhibitory action of C1-Inh, and activation proceeds spontaneously and rapidly at 37 degrees C.