Application of long synthetic oligonucleotides for gene analysis: effect of probe length and stringency conditions on hybridization specificity

Two different lengths of long unique synthetic oligonucleotide probes (37- and 48-mers) specific for human major histocompatibility complex (MHC) class II beta genes were synthesized. These oligonucleotides were utilized to examine factors influencing hybridization specificity. Both probe length and stringency of washing conditions were found to be crucial factors for sequence-specific hybridization.     

Study of stringency conditions for human papillomavirus DNA detection on cell lines, frozen and paraffin-embedded tissue sections by in situ hybridization with biotinylated probes

In situ hybridization was mainly used for typing human papillomavirus (HPV) in paraffin-embedded or frozen sections under stringent conditions (SC). We tested 5 different conditions of stringency with biotinylated HPV 1, 2, 16 and 18 probes on 3 cell lines (Sihà and CaSki with HPV16, HeLa with HPV18) by varying the concentration of formamide in the hybridization mixture and washings in order to determine the stringency conditions to be used to assess the presence of HPV and its typing: A-low stringency, hybridization at 35 degrees C below the melting temperature of DNA (Tm-35 degrees C) and washings without formamide; B-low stringency, hybridization and washings at Tm-35 degrees C; C-medium stringency, hybridization at Tm-35 degrees C and washings at Tm-12 degrees C; D-high stringency, hybridization at Tm-12 degrees C and washing without formamide; E-very high stringency, hybridization and washings at -12 degrees C. This study showed that HPV typing required a high stringency. On the contrary, under non stringent conditions (NSC), each cell line was positive with the heterologous probes. When 3 to 5 stringency conditions were assayed on 4 frozen samples, similar results were obtained. Typing required high stringency conditions whereas NSC allowed HPV detection. Furthermore, this study demonstrated the specificity of the reaction in lesions positive with more than one type. Stringent (Tm-12 degrees C) and non stringent (Tm-35 degrees C) conditions of hybridization were further applied to 57 biopsy sections (17 frozen and 40 paraffin-embedded specimens) from typical wart lesions and lesions suspected of HPV.(ABSTRACT TRUNCATED AT 250 WORDS)     

Renaturation of bacteriophage lambda DNA. Determination of the optimal renaturation conditions using a single-strand-specific DNase and alkaline-sucrose-gradient assay system.

Reannealed hybrid molecules of wild-type bacteriophage lambda DNA were prepared in aqueous solutions of formamide at a variety of NaCl concentrations at both room temperature ( 22 degrees C) and 37 degrees C. Treatment of the hybrid DNA molecules with the single-strand-specific nuclease S1 from Aspergillus oryzae followed by alkaline sucrose gradient sedimentation was used to monitor the extent and fidelity of hybridization. The optimal renaturation conditions at room temperature were found to be: 50% formamide, 35-55 mM NaCl and 10 mM Tris-HCl (pH 8.5) at 20-25 mug DNA/ml. Optimal conditions at 37 degrees C were: 32% formamide, 35-55 mM NaCl and 10 mM Tris-HCl (pH 8.5) at 20-25 mug DNA/ml. Under these conditions approximately 85-90% of the input single-stranded DNA (molecular weight 1.5 X 10(7)) was rendered S1-nuclease-resistant within 8 h at room temperature and 5 h at 37 degrees C. Neither Mg2+ nor spermidine appeared to have an effect on either the extent or fidelity of duplex formation. Experiments performed with excess enzyme and with lambda/lambda imm 434 heteroduplex hybrids suggested that the hybrid that the hybrid DNA molecules formed under optimal conditions contained no, or only short (less than 1%), mismatched regions.     

DNA microarrays with stem-loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem-loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem-loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10-30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3'-deletion sets from a target and evaluated the use of stem-loop DNA arrays for detecting p53 mutations in the deletion set. The stem-loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

Isolation and characterization of DNA-DNA and DNA-RNA.

A simple method for the isolation and characterization of DNA-DNA and DNA-RNA hybrid molecules formed in solution was developed. It was based on the fact that, in appropriate salt concentration, such as 5% Na2HPO4, DNA in either double-stranded (DNA-DNA or DNA-RNA) or single-stranded forms, but not free nucleotides, can bind to diethylaminoethylcellulose disc filters (DE81). Thus tested samples were treated with the single-strand-specific nuclease S1 and then applied to DE81 filters. The free nucleotides, resulting from degrading the single-stranded molecules, were removed by intensive washing with 5% Na2HPO4, leaving only the hybrid molecules on the filters. The usefulness of this method was illustrated in dissociation and reassociation studies of viral (SV40) or cellular (NIH/3T3) DNAs and DNA-RNA hybrid molecules. Using this technique the reassociation of denatured SV40 DNA was found to be a very rapid process. Dissociation studies revealed that the melting curves of tested DNAs were dependent on salt concentration. Thus the melting temperatures (tm) obtained for SV40 DNA were 76 degrees C at 1 X SSC (0.15 M NaCl-0.015 M sodium citrate) and 65 degrees C at 0.1 X SSC, and for NIH/3T3 DNA 82 degrees C at 1 X SSC and 68 degrees C at 0.1 X SSC. MuLV DNA-RNA hybrid molecules were formed by annealing in vitro synthesized MuLV DNA with 70S MuLV RNA at 68 degrees C. The melting temperature of this hybrid in the annealing solution was 87 degrees C. Another important feature of this procedure was that, after being selectively bound to the filters, the hybrid molecules could efficiently be recovered by heating the filters for 5 min at 60 degrees C in 1.5-1.7 M KCl. The recovered molecules were intact hybrids as they were found to be completely resistant to S1 nuclease.     

Mutation detection by stacking hybridization on genosensor arrays

A new strategy for analysis of point mutations using oligonucleotide array (genosensor) hybridization was investigated. In the new approach, a single-stranded target strand is preannealed with a labeled "stacking oligonucleotide," and then the partially duplex labeled target molecule is hybridized to an array of glass-tethered oligonucleotide probes, targeted to the region on the target immediately adjacent to the stacking oligomer. In this configuration, the base-stacking interactions between the "capture probe" and the contiguously stacking oligomer stabilize the binding of the target molecule to its complementary probe on the genosensor array. The temperature of hybridization can be adjusted so that the target molecule will bind to the glass-tethered probe only in the presence of the stacking oligomer, and a single mismatch at or near the terminal position ol the capture probe disrupts the stacking interactions and thereby eliminates or greatly reduces the hybridization. This stacking hybridization approach was investigated using a collection of synthetic targets, probes, and stacking oligonucleotides, which permitted identification of conditions for optimal base mismatch discrimination. The oligonucleotide probes were tethered to the glass using a simple, improved attachment chemistry in which a 3'-aminopropanol function introduced into the probe during chemical synthesis binds covalently to silanol groups on clean, underivatized glass. "Operating parameters" examined in the stacking hybridization system included length of capture probe, position, type and number of mismatches between the probe and the target, temperature of hybridization and length of washing, and the presence of terminal phosphate group in the probe, at its junction with the stacking oligomer. The results suggest that in the stacking hybridization configuration: 1. Optimal mismatch discrimination with 9-mer probes occurs at 45 degrees C, after which little or no improvement in mispair rejection occurred on lengthy continued washing at 45 degrees C. 2. At 25 degrees C optimal mismatch discrimination occurred with 7- or 8-mer probes, or with 9-mer probes containing an additional internal mismatch. 3. The presence of a phosphate group on the 5'-end of the glass-tethered probe had no general effect on mismatch discrimination, but influenced the relative stability of different mismatches in the sequence context studied. These results provide a motivation for continued development of the stacking hybridization technique for nucleic acid sequence analysis. This approach offers several advantages over the traditional allele-specific oligonucleotide hybridization technique, and is distinct from the contiguous stacking hybridization sitrategy that the Mirzabekov laboratory has introduced (Yershov et al. (1996) Proc. Natl. Acad. Sci. USA 93, 4913-4918; Parinov et al. (1996) Nucleic Acids Res. 24, 2998-3004).     

Synthetic oligodeoxyribonucleotide probes for detecting heat-stable enterotoxin-producing Escherichia coli by DNA colony hybridization

DNA colony hybridization was used to identify and enumerate enterotoxigenic Escherichia coli strains in foods. The cells were identified and enumerated by using synthetic polynucleotide probes for the heat-stable enterotoxin genes. These 22-base oligonucleotides, made from known nucleotide sequences of the genes for the heat-stable enterotoxins of human and porcine strains of E. coli, contain two mismatches between the two heat-stable enterotoxins. Colonies were replicated from agar medium onto paper filters and lysed with alkali followed by steam; probes were end labeled. After overnight hybridization at 40 degrees C and washing at 50 degrees C, autoradiograms were exposed at -70 degrees C. Results were consistent with suckling-mouse tests for heat-stable enterotoxins. A stronger signal was obtained on paper filters than on nitrocellulose filters. Enterotoxigenic E. coli cells were detected when mixed with a 1,000-fold excess of nonenterotoxigenic E. coli cells. This procedure appears to be more acceptable for routine testing than the use of cloned DNA fragments, labeling by nick translation, and lysing colonies on nitrocellulose filters.     

Synthetic oligodeoxyribonucleotide probes for detecting heat-stable enterotoxin-producing Escherichia coli by DNA colony hybridization.

DNA colony hybridization was used to identify and enumerate enterotoxigenic Escherichia coli strains in foods. The cells were identified and enumerated by using synthetic polynucleotide probes for the heat-stable enterotoxin genes. These 22-base oligonucleotides, made from known nucleotide sequences of the genes for the heat-stable enterotoxins of human and porcine strains of E. coli, contain two mismatches between the two heat-stable enterotoxins. Colonies were replicated from agar medium onto paper filters and lysed with alkali followed by steam; probes were end labeled. After overnight hybridization at 40 degrees C and washing at 50 degrees C, autoradiograms were exposed at -70 degrees C. Results were consistent with suckling-mouse tests for heat-stable enterotoxins. A stronger signal was obtained on paper filters than on nitrocellulose filters. Enterotoxigenic E. coli cells were detected when mixed with a 1,000-fold excess of nonenterotoxigenic E. coli cells. This procedure appears to be more acceptable for routine testing than the use of cloned DNA fragments, labeling by nick translation, and lysing colonies on nitrocellulose filters.     

Reliable hybridization of oligonucleotides as short as six nucleotides

Although there are many new applications for hybridizing short, synthetic oligonucleotide probes to DNA, such applications have not included determining unknown sequences of DNA. The lack of clear discrimination in hybridization of oligo probes shorter than 11 nucleotides and the lack of a theoretical understanding of factors influencing hybridization of short oligos have hampered the development of their use. We have found conditions for reliable hybridization of oligonucleotides as short as seven nucleotides to cloned DNA or to oligonucleotides attached to filters. Low-temperature hybridization and washing conditions, in contrast to the high stringency conditions currently used in hybridization experiments, have the potential for allowing the simple use of all oligos of six nucleotides or longer in meaningful hybridizations. We also present the hybridization discrimination theory that provides the conceptual framework for understanding these results.     

DNA microarrays with stem–loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem–loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem–loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10–30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3′-deletion sets from a target and evaluated the use of stem–loop DNA arrays for detecting p53 mutations in the deletion set. The stem–loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

Study of stringency conditions for human papillomavirus DNA detection on cell lines,frozen and paraffin-embedded tissue sections by in situ hybridization with biotinylated probes

Summary In situ hybridization was mainly used for typing human papillomavirus (HPV) in paraffin-embedded or frozen sections under stringent conditions (SC). We tested 5 different conditions of stringency with biotinylated HPV 1, 2, 16 and 18 probes on 3 cell lines (Siha and CaSki with HPV16, HeLa with HPV18) by varying the concentration of formamide in the hybridization mixture and washings in order to determine the stringency conditions to be used to assess the presence of HPV and its typing: A-low stringency, hybridization at 35° C below the melting temperature of DNA (Tm-35° C) and washings without formamide; B-low stringency, hybridization and washings at Tm-35° C; C-medium stringency, hybridization at Tm-35° C and washings at Tm-12° C; D-high stringency, hybridization at Tm-12° C and washing without formamide; E-very high stringency, hybridization and washings at –12° C. This study showed that HPV typing required a high stringency. On the contrary, under non stringent conditions (NSC), each cell line was positive with the heterologous probes.When 3 to 5 stringency conditions were assayed on 4 frozen samples, similar results were obtained. Typing required high stringency conditions whereas NSC allowed HPV detection. Furthermore, this study demonstrated the specificity of the reaction in lesions positive with more than one type.Stringent (Tm-12° C) and non stringent (Tm-35° C) conditions of hybridization were further applied to 57 biopsy sections (17 frozen and 40 paraffin-embedded specimens) from typical wart lesions and lesions suspected of HPV. Nineteen samples were totally negative under both NSC and SC, and considered as non-infected by HPV. In 22 specimens positive, under both NSC and stringent conditions (SC), the HPV type was identified. Ten specimens reacted with 1, 2 or 3 HPV types under NSC but the HPV DNA was not typed with the probes used. Six lesions were negative under NSC but were typed under SC. Most paraffin sections were labeled only with one HPV probe under NSC, whereas frozen sections were often labeled with 2 or 3 HPV probes. The HPV probe positive under SC was usually positive under NSC in both frozen and paraffin sections. HPV type 1 probe was more frequently positive under NSC in paraffin- embedded sections than the others and the 4 probes tested were equally positive in frozen sections.These findings show the interest of in situ hybridization in low stringency conditions since 17% of our lesions (10/57) were positive only under NSC: HPV DNA was detected but not typed with the probes used. Frozen sections were more frequently positive than paraffin sections, suggesting a loss of DNA accessibility in the latter, due to the fixation or processing before hybridization.     

Optimization of reverse hybridization in microplates coated with rRNA targeted oligonucleotide probes

Among the modern molecular techniques for the identification of microorganisms the most straightforward way is through direct hybridization with rRNA/rDNA targeted probes. In this study, the optimization of the experimental procedures for the reverse hybridization technique in 96-well microplates is described using both synthetic model oligonucleotides (18 b) and amplified DNA (app. 4500 bp). Three different types of plates were compared (Maxi Sorp, NucleoLink, CovaLink). Plates made from nonchemically modified polystyrene which are conventionally used in immunoassays (MaxiSorp) proved to be an economic alternative for plates offering chemically modified tailor-made surfaces. Phosphorylation of the oligonucleotide probe was not necessary for successful immobilization whereas with 5'-terminal hexa-deoxyadenosine tailed capture oligonucleotides an enhanced sensitivity of the assay was observed. Variation of the stringency by adjusting different concentrations of formamide during the washing step ensures high probe specificity and therefore allows reliable identification of the microorganisms. The assay can be performed in less than 4 hours using pre-coated plates which can be stored for several weeks. After dissociation of the target DNA/capture probe duplex with an alkaline denaturing solution rehybridization is possible.     

Ribonucleic acid–deoxyribonucleic acid hybridization in aqueous solutions and in solutions containing formamide

Hybridization in 6xSSC (SSC, 0.15m-sodium chloride-0.015m-sodium citrate) at 66 degrees C was compared with hybridization in formamide-6xSSC (1:1, v/v) at 35 degrees C. As expected, the RNA hybridization potential was labile in the former system and stable in the latter. DNA retention by filters was poor in the formamide system, but could be improved. Several other properties of the hybridization reaction were explored and it was concluded that the formamide system is generally superior.     

Designing better probes: effect of probe size, mismatch position and number on hybridization in DNA oligonucleotide microarrays

DNA microarrays represent a powerful technology whose use has been hampered by the uncertainty of whether the same principles, established on a scale typical for membrane hybridizations, apply when using the smaller, rigid support of microarrays. Our goal was to understand how the number and position of base pair mismatches, probe length and their G+C content affect the intensity and specificity of the hybridization signal. One set of oligonucleotides (50-mers) based on three regions of the Bacillus thuringiensis cry1Aa1 gene possessing 30%, 42%, and 56% G+C content, a second set with similar G+C content (37% to 40%) but different lengths (30 to 100 bases), and finally amplicon probes (101 to 3000 base pairs) with G+C contents of 37% to 39%, were used. Probes with mismatches distributed over their entire length were the most specific, while those with mismatches grouped at either the 3' or 5'-end were the least specific. Hybridizations done at 8 to 13 degrees C below the calculated T(m) of perfectly matched probes, as compared to the widely used lower temperatures of 20 to 25 degrees C, enhanced probe discrimination. Longer probes produced higher fluorescent hybridization signals than shorter ones. These results should help to optimize the design of oligonucleotide-based DNA microarrays.     

Chromosomal DNA denaturation and reassociation in situ.

The degree of chromosomal DNA (cDNA) denaturation and renaturation on polytene chromosomes has been measured by UV microspectrophotometry. Also DNA losses occurring upon denaturation have been quantified by Feulgen, gallocyanin-chromalum and UV. It has been observed that denaturation in alkali (0.07 N NaOH at room temperature) and formamide (90% formamide; 0.1 SSC, pH 7.2) at 65 °C removes about 30% of the DNA. Low DNA loss occurs upon denaturation in HCl (0.24 M) at room temperature and 60% formamide: 2 × 10^?4 M EDTA (pH 8) at 55 °C. The presence of 4% formaldehyde in the denaturation buffer prevents DNA loss. After denaturation of chromosomes in 0.1 × SSC containing 4% formaldehyde at 100 °C for 30 sec, an hyperchromicity of 39 °C is observed. The denaturation efficiency varies with the denaturation treatment. The percentage reassociation was measured from the difference in the UV absorption of renatured chromosomes and that of denatured chromosomes from the same set. It seems that in our conditions DNA:DNA reassociation does not occur. The efficiency of hybridization is proportional to the denaturation extent of the DNA. However, the entire fraction of DNA which has been denatured is not available for hybridization.     

Effect of formaldehyde on the efficiency of hybridization of DNA immobilized on nitrocellulose filters.

We report in this study that under certain conditions formaldehyde interacts with DNA and makes it more efficient for hybridization on nitrocellulose filters. Hybridization signals of formaldehyde-treated DNA are stronger (up to 10 fold) as compared with that of the heat- or alkali-denatured DNA. Various parameters of the DNA-formaldehyde reaction are optimized as follows: (a) 6 x SSC, 10% formaldehyde, 60 degrees C, 20-30 min, reaction volume 10-200 microliters or (b) 6 x SSC, 5% formaldehyde, 98 degrees C, 15 min, reaction volume 10-200 microliters. Treatment of agarose gels after electrophoresis with formaldehyde improved both the transfer of DNA and the efficiency of hybridization. The following conditions are recommended for gel treatment: denaturation in 0.3 N NaOH, 1 M NaCl followed by neutralization with 0.5 M phosphate buffer, pH 7.0, containing 10% formaldehyde at 60 degrees C for 20 min.     

Influence Factors of in Situ Hybridization in Triticeae

In order to increase the efficiency, accuracy, fidelity and reliability of in situ hybridization to identify the alien chromosomes and chromosome fragments in triticeae, major steps including probe labelling, chromosome denaturation, DNA concentration for blocking and post-hybridization washing in in situ hybridization were optimized. The results are as fel-lows. (1) The cloned repetitive DNA sequence could be biotin labelled more efficiently by nick translation than by random oligonucleotide labelling method: whereas the random oligonucleotide labelling is more suitable for genomic DNA probe and the labelling efficiency could be increased by prolonging the labelling time appropriately. (2) Denaturation of the biotinylated probe and chromosomes together in oven at 75 ℃ showed the satisfactory results of in situ hybridization, but the contour of treated rye chromosomes often became blurred when the temperature of denaturation was higher than 85℃. When 70% formamide (in 2 × SSC) was used to denature the chromosome DNA, rye chromosomes often swelled although the biotinylated signals could be detected. (3) The unlabeled DNA concentrations for blocking were tested in genomic in situ hybridization to detect the Haynaldia villosa chromosomes with biotin labelled H. villosa genomic DNA as probe. The best contrast between H. villosa and wheat chromosomes was obtained without using the blocking DNA (unlabeled wheat genomic DNA). (4) Post-hybridization washes were carried out in 50% formamide (in 2 × SSC) or in 2 × SSC at different temperature. When the post-hybridization washing temperature were increased gradually from room temperature to 42℃ in 50% formamide (in 2 × SSC). specific in situ hybridization signals on chromosome in triticeae were observed using both biotinylated repetitive DNA and genomic DNA as probe. With the improved resolution of this protocol, in situ hybridization would be widely applied to wheat breeding and genetics researches.     

A comparative study of in situ hybridization procedures using cRNA applied to Drosophila hydei salivary gland chromosomes

The effect of different denaturation and hybridization procedures on the efficiency of in situ ³H-cRNA hybridization with DNA in the polytene chromosomes of Drosophila hydei was investigated.Denaturation of the DNA in the squash preparations with 90% formamide in 0.1 × SSC at 65 °C for 2.5 h gave a significantly higher retention of radioactivity following in situ hybridization than did denaturation by 30 sec incubation in boiling 0.1 × SSC.A comparison of the effect of various SSC concentrations in the hybridization mixture revealed that among the SSC concentrations tested, 3 × SSC or 4 × SSC gave the highest efficiency of hybrid formation.Hybridization in 50% formamide at 20 °C resulted in continuing hybrid formation over a period of 3.5 h, the majority of the cRNA/DNA hybrids being formed within the first 10 min of the incubation period. The thermal dissociation profile of in situ cRNA/DNA hybrids formed in 50% formamide, 4 × SSC at 20 °C, as determined in 0.1 × SSC indicated a T_m of 66 °C. The shape of the profile and the results of competition experiments suggested a high fidelity of base-matching in the in situ ³H-cRNA/DNA hybrids.Non-chromosomal background labeling in autoradiographs of polytene chromosomes hybridized with ³H-cRNA was effectively reduced by adding a 200–1000 fold excess of cold 28S + 18S RNA.