Interaction (integration and excision) of the pRP19.6 plasmid, a derivative of the RP1 plasmid containing duplicated sequence IS21, with the chromosome of Escherichia coli K12

A pRP19.6 plasmid is the derivative of the temperature sensitive RPlts12 plasmid and contains a duplicated IS21 (IS8) element. Using temperature sensitive pRP19.6 replication, Hfr strains have been obtained by integration of the plasmid into the chromosome of E. coli rec+ and recA- cells and their properties were studied. According to the results obtained, pRP19.6 insertion into the genome of the rec+ bacteria IS reversible, and its integration into the chromosome of the recA- bacteria produced the stable Hfr strains. To elucidate the mechanism of pRP19.6 excision from the bacterial chromosome, plasmids of R+ transconjugates generated with a low frequency in the crosses between the stable Hfr strains and the rec+ recipients were analyzed. It was shown that the stable Hfr clones might produce stable R1 plasmids as well as a family of deletion KmsTra- derivatives of the pRP19.6. The structure of the KmsTra- was investigated and the mechanism of their formation was proposed. In the light of the data obtained, prospects of pRP19.6 practical application are discussed.     

Isolation of a temperature-sensitive derivative of RP1

A derivative of RP1 has been isolated which is relatively stable in Escherichia coli during growth at 30 °C but which is rapidly lost during growth at 42 °C. This plasmid is a useful vector for introducing transposons into different replicons.     

Target joining of duplicated insertion sequence IS21 is assisted by IstB protein in vitro

Tandemly repeated insertion sequence IS21, located on a suicide plasmid, promoted replicon fusion with bacteriophage lambda in vitro in the presence of ATP. This reaction was catalyzed in a cell extract containing the 45-kDa IstA protein (cointegrase) and the 30-kDa IstB helper protein of IS21 after both proteins had been overproduced in Escherichia coli. Without IstB, replicon fusion was inefficient and did not produce the 4-bp target duplications typical of IS21.     

Tn1 insertion mutagenesis in Escherichia coli K-12 using a temperature-sensitive mutant of plasmid RP4

Summary A method for Tn1 insertion mutagenesis in Escherichia coli has been developed using pTH10, a mutant plasmid of RP4 temperature-sensitive for maintenance. The mutagenesis involves three steps. Firstly, from strains carrying pTH10 showing resistance to the antibiotics kanamycin, tetracycline, and ampicillin at 30° C but not at 42° C, clones are isolated resistant to kanamycin at 42° C. Such temperature-independent, drug resistant clones probably carry pTH10 integrated into the host chromosome. Secondly, they are cultivated at 30° C. At this temperature segregants carrying pTH10, which has been excised from the host chromosome, accumulate. Thirdly, to cure such segregants of autonomous pTH10, they are cultivated at 42° C. By these procedures, clones free of pTH10, but carrying Tn1 insertions on the host chromosome, were obtained.About 3% of the clones carrying Tn1 insertions were auxotrophic. Distribution of auxotrophic mutations was not random, indicating the existence of preferential integration sites of Tn1 on the host chromosome. The frequency of precise excision of Tn1 was less than 10^-10.The pTH10 plasmid has a wide host range among Gram-negative bacteria and thus may serve as a excellent vector for insertion mutagenesis of Tn₁ in many Gram-negative bacterial species.     

IS21 insertion in the trfA replication control gene of chromosomally integrated plasmid RP1: a property of stable Pseudomonas aeruginosa Hfr strains

Summary Broad host range IncP-1 plasmids are able to integrate into the chromosome of gram-negative bacteria. Strains carrying an integrated plasmid can be obtained when the markers of a temperature-sensitive (ts) plasmid derivative are selected at non-permissive temperature; in this way Hfr (high frequency) donor strains can be formed. The integrated plasmids, however, tend to be unstable in the absence of continuous selective pressure. In order to obtain stable Hfr donor strains of Pseudomonas aeruginosa PAO, we constructed a derivative of an RP1 (ts) plasmid, pME134, which was defective in the resolvase gene (tnpR) of transposon Tn801. Chromosomal integration of pME134 was selected in a recombination-deficient (rec-102) PAO strain at 43°C. Plasmid integration occurred at different sites resulting in a useful set of Hfr strains that transferred chromosomal markers unidirectionally. The tnpR and rec-102 mutations prevented plasmid excision from the chromosome. In several (but not all) Hfr strains that grew well and retained the integrated plasmid at temperatures below 43°C, the insertion element IS21 of RP1 was found to be inserted into the trfA locus (specifying an essential trans-acting replication funtion) of the integrated plasmid. One such Hfr strain was rendered rec ⁺; from its chromosome the pME134::IS21 plasmid (=pME14) was excised and transferred by conjugation to Escherichia coli where pME14 could replicate autonomously only when a helper plasmid provided the trfA ⁺ function in trans. Thus, it appears that trfA inactivation favours the stability of chromosomally integrated RP1 in P. aeruginosa.     

Reversion of an ilvB mutation in Pseudomonas aeruginosa in the presence of a derivative of RP1 plasmid

We have isolated a derivative of RP1, a broad-host-range plasmid, in whose presence the ilvB112 mutation of Pseudomonas aeruginosa strain PU21 reverts at a high frequency. This derivative of RP1 (RP1-ilvB+ complex) may have arisen by a fusion of the P. aeruginosa ilvB gene with RP1 during their co-transfer into strain PU21. The RP1 derivative is not very stable in the PU21 background but it can apparently be stabilized by its integration into the host chromosome, resulting in an Hfr-type donor strain, SP500.     

Analysis of chromosome mobilization using hybrids between plasmid RP4 and a fragment of bacteriophage lambda carrying IS1

In vitro recombination was used to generate RP4 plasmids with an inserted restriction fragment of bateriophage λ. In some cases the λ DNA also carried the insertion sequence IS1. Comparisons were made between the abilities of these plasmids to mobilize the Escherichia coli K-12 chromosome in different genetic backgrounds. RP4-borne IS1 acting alone promoted chromosome transfer but with an efficiency 1% of that resulting from more extensive plasmid-chromosome homology. A recA mutation in the donor depressed the mobilization frequency below the level of detection. Correlation of the direction of chromosome transfer and the orientation of the cloned λ DNA allowed the direction of RP4 transfer to be determined. Studies on recombinants showed that in general they also acquired an intact, autonomous plasmid, suggesting the process of mobilization by RP4 may differ in certain features from chromosome transfer by F.     

Isolation of a nontransmissible antibiotic resistance plasmid by transductional shortening of R factor RP1.

A plasmid segregant carrying tetracycline and carbenicillin resistance markers has been isolated from R factor RP1 by transductional shortening with phage P22. The new plasmid RP1-S2, which has a molecular weight of 23 times 10-6, has lost the transfer, phage sensitivity, and neomycin resistance functions of RP1. It combines readily with a W group plasmid, R388, to form a transmissible carbenicillin and trimethoprim resistance plasmid, RWP1.     

High frequency mobilization of the chromosome of Escherichia coli by a mutant of plasmid RP4 temperature-sensitive for maintenance

Summary Two mutants of plasmid RP4 temperaturesensitive for maintenance were isolated and one of them (pTH 10) was extensively studied. Cells carrying pTH 10 showed temperature-sensitive drug resistance from which we isolated a number of temperature-independent derivatives. Almost all of them were Hfrs donating chromosomal genes to recipient bidirectionally from different points of origin. The Hfrs may be formed in two steps: (1) the transposon (Tn 1) carried by pTH 10 translocates into the host chromosome, and (2) pTH 10 is integrated in the host chromosome by reciprocal recombination between the Tn 1 s, one situated on pTH 10 and another on the host chromosome. That temperature-independent drug resistance selects for this type of derivative, was supported by the following observations: (1) Hfrs thus obtained were usually unstable and segregated at high frequency revertants showing temperature-sensitive drug resistance when they were cultivated at 30° C. (2) The revertants, cured of pTH 10 were still ampicillin resistant, indicating existence of Tn 1 inserted in the host chromosome. (3) Tn 1 insertions found in these derivatives mapped in the vicinity of points of origin of the original Hfrs. (4) When new Hfrs were constructed by: (a) transduction with Plkc of Tn 1 insertions found in derivatives of Hfrs, (b) introduction of pTH 10 into the transductants, and (c) isolation of clones of temperature-independent drug resistance from such pTH 10 carrying strains, they had similar characteristics to the original Hfrs from which Tn 1 insertions were derived. Possibilities for genetic manupulation using pTH 10 in a wide range of Gram-negative bacteria are discussed.     

Mobilization function of the pBHR1 plasmid, a derivative of the broad-host-range plasmid pBBR1

The pBHR1 plasmid is a derivative of the small (2.6-kb), mobilizable broad-host-range plasmid pBBR1, which was isolated from the gram-negative bacterium Bordetella bronchiseptica (R. Antoine and C. Locht, Mol. Microbiol. 6:1785-1799, 1992). Plasmid pBBR1 consists of two functional cassettes and presents sequence similarities with the transfer origins of several plasmids and mobilizable transposons from gram-positive bacteria. We show that the Mob protein specifically recognizes a 52-bp sequence which contains, in addition to the transfer origin, the promoter of the mob gene. We demonstrate that this gene is autoregulated. The binding of the Mob protein to the 52-bp sequence could thus allow the formation of a protein-DNA complex with a double function: relaxosome formation and mob gene regulation. We show that the Mob protein is a relaxase, and we located the nic site position in vitro. After sequence alignment, the position of the nic site of pBBR1 corresponds with those of the nick sites of the Bacteroides mobilizable transposon Tn4555 and the streptococcal plasmid pMV158. The oriT of the latter is characteristic of a family of mobilizable plasmids that are found in gram-positive bacteria and that replicate by the rolling-circle mechanism. Plasmid pBBR1 thus appears to be a new member of this group, even though it resides in gram-negative bacteria and does not replicate via a rolling-circle mechanism. In addition, we identified two amino acids of the Mob protein necessary for its activity, and we discuss their involvement in the mobilization mechanism.     

Analysis of chromosome mobilization using hybrids between plasmid RP4 and a fragment of bacteriophage λ carrying IS1

In vitro recombination was used to generate RP4 plasmids with an inserted restriction fragment of bateriophage λ. In some cases the λ DNA also carried the insertion sequence IS1. Comparisons were made between the abilities of these plasmids to mobilize the Escherichia coli K-12 chromosome in different genetic backgrounds. RP4-borne IS1 acting alone promoted chromosome transfer but with an efficiency 1% of that resulting from more extensive plasmid-chromosome homology. A recA mutation in the donor depressed the mobilization frequency below the level of detection. Correlation of the direction of chromosome transfer and the orientation of the cloned λ DNA allowed the direction of RP4 transfer to be determined. Studies on recombinants showed that in general they also acquired an intact, autonomous plasmid, suggesting the process of mobilization by RP4 may differ in certain features from chromosome transfer by F.     

Deletions of plasmid pRP3.1ts12 derived from RP1 leading to the suppression of the thermosensitive ts12 mutation and mucoid phenotype induction in Escherichia coli K-12

Properties of a temperature-sensitive in replication mutant pRP3.1ts12 derived from the broad host range RP1 plasmid have been studied. pRP3.1ts12 is a shortened variant of the temperature-sensitive RP1ts12 mutant carrying a deletion in a region from 2.3 to 7.6 MD. In contrast to RP1ts12, the plasmid pRP3.1ts12 is a leaky ts mutant and is characterized by an elevated frequency of reversions to the temperature-independent phenotype. Temperature-independent derivatives of pRP3.1ts12 were studied. Approx. 15% of these were found to induce mucoid growth of the host cells. As revealed from restriction endonuclease analysis, most of the latter derivatives contain deletions of small DNA segments in the region 0.56 to 2.3 MD of the RP1 map. The possible nature of the gene(s), whose deletions suppress the temperature-sensitive ts12 mutation and results in superproduction of Escherichia coli capsular poly-saccharide is discussed.     

Immunity to repeated transposition of the insertion sequence IS21

The ability of pBR325 derivatives carrying a copy of IS21-element to accept the second copy of this element from plasmid pRP19.6, a temperature-sensitive for replication mutant of RPI containing the duplicated IS21 was studied. It was shown that the frequency of IS21 transposition into plasmids pBR32S::IS21 differing by localization IS21 was lower by two orders of magnitude as compared to that of pBR325. The restriction endonuclease analysis revealed that the insertion of the second copy of IS21 resulted in the formation of pBR325 derivatives carrying the tandem repeated copies of IS21. It was also shown that the plasmids pBR325::IS21 were capable of increasing the frequency of pRP19.6 insertion into the bacterial chromosome from 3-9 to 200-300 times depending on IS21 localization. On the basis of the results obtained and literature data the possible mechanism of the transposition immunity is discussed.     

Isolation and complementation of temperature-sensitive replication mutants of Staphylococcus aureus plasmid pC194

Temperature-sensitive replication (Tsr) mutants have been isolated from the Staphylococcus aureus plasmid pC194. For three of the four mutant plasmids tested (pSAO801, pSAO802, and pSAO804) the segregation kinetics suggested a complete block of plasmid replication at 43 degrees C. The replication defects of three mutant plasmids: pSAO802, pSAO803, and pSAO804 could be complemented by recombinant plasmids carrying a segment from either the wild type or the other mutant, pSAO801. There was no complementation when the segment carried by the recombinant plasmid was derived from one of the three complementable mutants. These data were taken as evidence for the involvement of a diffusible, plasmid-encoded product, RepH, in pC194 replication. The complementation of the fourth Tsr mutant, pSAO801, could not be tested due to an abnormal susceptibility of this mutant to the incompatibility expressed by recombinants carrying segments derived from pC194 or its mutants. A single mutation was found to be responsible for both pSAO801 instability and its altered incompatibility properties but the nature of the defect has not yet been elucidated.     

Characterization of a Mycobacterium bovis BCG insertion sequence related to the IS21 family

The structure and distribution of a Mycobacterium bovis BCG insertion element of the IS21 family were investigated. Several IS21-like elements found in mycobacterial genomes were separated in four types, following their nucleic acid similarities. The M. bovis BCG IS21 element is highly similar to IS1533 (class I), 70% similar to IS1534 (class II), 52% similar to IS1532 (class III) of Mycobacterium tuberculosis, and 54% similar to both an Mycobacterium avium serovar 2 and an M. avium silvaticum IS (class IV). The M. bovis BCG IS21 element of the class I appears to be present in a single copy in the genome of M. bovis BCG, M. bovis, M. tuberculosis and Mycobacterium africanum and to be absent from all other tested species of the Corynebacteria-Mycobacteria-Nocardia group.     

Molecular cloning and mapping of a deletion derivative of the plasmid Rts 1

The plasmid pTW20 is a deletion derivative of the kanamycin resistance plasmid Rts1. By digesting pTW20 DNA with EcoRI endonuclease six fragments were generated, and each was cloned in the vector plasmid pACYC184. These cloned EcoRI fragments were further digested with various endonucleases, and the cleavage map of pTW20 was constructed. A SalI fragment (1.5 Md) in E1 (the largest EcoRI fragment; 11.5 Md) contained the genes kan (kanamycin resistance) and puv (uv sensitization of host). An electron microscopy study of a BamHI fragment containing kan revealed the presence of a transposon-like structure in the fragment. The smallest EcoRI fragment E6 (2.0 Md) was capable of autonomous replication in a polA host, indicating that E6 contained replication genes of pTW20. These genes were found to be located on a 1.1-Md HindIII fragment in E6. Two incompatibility genes were identified on the pTW20 genome, one located on each of the fragments E6 and E5 (3.5 Md), and expressed T incompatibility independently. The nature of the temperature sensitivity of pTW20 was discussed.