Effect of pollutants on the ergosterol content as indicator of fungal biomass

Ergosterol content was determined in 20 white-rot fungi isolates and the values ranged from 2380 to 13 060 μg g⁻¹ fungal biomass. Significant changes of ergosterol content according the physiological stage for Bjerkandera adusta 4312 and Coriolopsis gallica 8260 were found, showing the highest values during the stationary phase. However, in the case of Phanerochaete chrysosporium 3642, no changes were detected during growth. The effect of pollutants, such as heavy metals and fungicides, on the ergosterol content of C. gallica was determined. Heavy metals (Cu 80 ppm, Zn 50 ppm or Cd 10 ppm) and fungicides (thiram 3 ppm or pentachlorophenol 1.5 ppm) at concentrations that reduce the metabolic activity between 18% and 53% (pollutant-stressed cultures) did not affect the ergosterol content. Only the fungicide zineb (25 ppm) reduced significantly the ergosterol content in biomass basis. In soil experiments with Cu (80 ppm) or thiram (10 ppm) after 15 and 30 days of incubation, the ergosterol content in soil was linearly correlated to the fungal biomass C in both polluted and control soil cultures. The ergosterol content was independent of the presence or the absence of pollutants. Thus, these results indicate that ergosterol can be a useful indicator for fungal biomass in polluted soils, and can be applied for monitoring bioremediation processes.     

Implications of FPS1 deletion and membrane ergosterol content for glycerol efflux from Saccharomyces cerevisiae

The deletion of the gene encoding the glycerol facilitator Fps1p was associated with an altered plasma membrane lipid composition in Saccharomyces cerevisiae. The S. cerevisiae fps1delta strain respectively contained 18 and 26% less ergosterol than the wild-type strain, at the whole-cell level and at the plasma membrane level. Other mutants with deficiencies in glycerol metabolism were studied to investigate any possible link between membrane ergosterol content and intracellular glycerol accumulation. In these mutants a modification in intracellular glycerol concentration, or in intra- to extracellular glycerol ratio was accompanied by a reduction in plasma membrane ergosterol content. However, there was no direct correlation between ergosterol content and intracellular glycerol concentration. Lipid composition influences the membrane permeability for solutes during adaptation of yeast cells to osmotic stress. In this study, ergosterol supplementation was shown to partially suppress the hypo-osmotic sensitivity phenotype of the fps1delta strain, leading to more efficient glycerol efflux, and improved survival. The erg-1 disruption mutant, which is unable to synthesise ergosterol, survived and recovered from the hypo-osmotic shock more successfully when the concentration of exogenously supplied ergosterol was increased. The results obtained suggest that a higher ergosterol content facilitates the flux of glycerol across the plasma membrane of S. cerevisiae cells.     

The effect of altered ergosterol content on the transport of various amino acids in Candida albicans

Candida albicans cells have low levels of ergosterol when grown in ascorbic acid-supplemented media. When cells are grown in hydroquinone-supplemented media, the ergosterol levels became higher as compared to normal cells. The uptake of lysine, glycine, glutamic acid, proline, methionine and serine is reduced in hydroquinone-supplemented cells. In contrast to hydroquinone-supplemented cells, the rate and level of accumulation of these amino acids are higher in ascorbic acid-supplemented cells. Nystatin-resistant isolates of C. albicans with low ergosterol contents also exhibit an increased rate and level of accumulation of these amino acids. The uptake of phenylalanine and leucine remained unaffected by such a change in ergosterol levels brought about by different supplementation of the media. The results demonstrate a correlation between ergosterol levels and amino acids uptake. Contrary to various reports, the rate of K⁺ efflux does not seem to correlate with the amino acid uptake in C. albicans cells.     

Influence of cholesterol and ergosterol on membrane dynamics: a fluorescence approach

Sterols are essential membrane components of eukaryotic cells and are important for membrane organization and function. Cholesterol is the most representative sterol present in higher eukaryotes. It is often found distributed non-randomly in domains or pools in biological and model membranes. Cholesterol-rich functional microdomains (lipid rafts) are often implicated in cell signaling and membrane traffic. Interestingly, lipid rafts have also recently been isolated from organisms such as yeast and Drosophila, which have ergosterol as their major sterol component. Although detailed biophysical characterization of the effect of cholesterol on membranes is well documented, the effect of ergosterol on the organization and dynamics of membranes is not very clear. We have monitored the effect of cholesterol and ergosterol on the dynamic properties of both fluid (POPC) and gel (DPPC) phase membranes utilizing the environment-sensitive fluorescent membrane probe DPH. Our results from steady state and time-resolved fluorescence measurements show, for the first time, differential effects of ergosterol and cholesterol toward membrane organization. These novel results are relevant in the context of lipid rafts in ergosterol-containing organisms such as Drosophila which maintain a low level of sterol compared to higher eukaryotes.     

Sterol 24-C-methyltransferase: An enzymatic target for the disruption of ergosterol biosynthesis and homeostasis in Cryptococcus neoformans

Growth of Cryptococcus neoformans was inhibited by nine nitrogen and sulfur-containing sterols with a heteroatom positioned at C3, C7, C24, C25 or C32 in the lanostane frame. Analysis of the sterol composition of control and treated cells by GC-MS and ¹H NMR has proven that the C-methylation reaction catalyzed by the sterol 24-C-methyltransferase (24-SMT) is the crucial first step in a kinetically favored pathway that fails to include obtusifoliol or zymosterol as intermediates. Cultures fed [methyl-²H₃]methionine led to two deuterium atoms into each of the newly biosynthesized sterols forming a route lanosterol, eburicol (24(28)-methylene-24,25-dihydrolanosterol), 32-noreburicol and ergost-7-enol to ergosterol. Examination of the substrate specificity of a soluble 24-SMT from C. neoformans showed lanosterol to be the optimal acceptor molecule. Incubation with the test compounds generated induced amounts of lanosterol, eburicol or 32-noreburicol concurrent with a decrease of ergosterol. Among them 24(R,S),25-epiminolanosterol (inhibitor of 24-SMT) showed the most potent in vitro antifungal activity comparable to those of itraconazole (inhibitor of the 14-demethylase). Taken together, these data indicate that treatment with substrate-based inhibitors of 24-SMT, a catalyst not found in humans, can disrupt ergosterol homeostasis involved with fungal growth and therefore these compounds can provide leads for rational drug design of opportunistic pathogens.     

Microbial side-chain degradation of ergosterol and its 3-substituted derivatives: A new route for obtaining of deltanoids

The strain of Mycobacterium sp. VKM Ac-1815D was found to convert ergosterol and its 3-acetate mainly to androst-4-ene-3,17-dione (AD) thus demonstrating ability to reduce 7(8)-double bond and hydrolyze sterol ester in addition to oxidation of 3β-hydroxy group, Δ⁵-Δ⁴ isomerization and side-chain degradation. Ergosterol bioconversion in the presence of isoflavones and ions of some bivalent metals - known inhibitors of 3β-hydroxysteroid dehydrogenase, did not alter products composition. Protection of ergosterol 3β-hydroxyl with methoxymethyl group allowed the formation of bioconversion products retaining the Δ^5,7-configuration. The major product was identified by mass-spectrometry and proton NMR as 3-methoxymethoxy-androsta-5,7-diene-17-one (MA). The MA producing activity was found to be inducible with sterols, cholestenone or lithocholic acid, but not with dehydroepiandrosterone, AD, androsta-1,4-ene-3,17-dione or organic acids. Under the optimized conditions, the yield of MA reached 5 g/l from 10 g/l O-methoxymethyl-ergosterol (approx. 60% molar conversion) for 120 h. The results might be applied at the production of novel vitamin D derivatives.     

Efficacy of liquid spray decontaminants for inactivation of Bacillus anthracis spores on building and outdoor materials

Aims: To obtain data on the efficacy of various liquid and foam decontamination technologies to inactivate Bacillus anthracis Ames and Bacillus subtilis spores on building and outdoor materials. Methods and Results: Spores were inoculated onto test coupons and positive control coupons of nine different materials. Six different sporicidal liquids were spray‐applied to the test coupons and remained in contact for exposure times ranging from 10 to 70 min. Following decontamination, spores were recovered from the coupons and efficacy was quantified in terms of log reduction. Conclusions: The hydrogen peroxide/peracetic acid products were the most effective, followed by decontaminants utilizing hypochlorous acid chemistry. Decontamination efficacy varied by material type. Significance and Impact of the Study: The study results may be useful in the selection of technologies to decontaminate buildings and outdoor areas in the event of contamination with B. anthracis spores. These results may also facilitate selection of decontaminant liquids for the inactivation of other spore‐forming infectious disease agents.     

Isolation and identification of Aspergillus fumigatus mycotoxins on growth medium and some building materials

Genotoxic and cytotoxic compounds were isolated and purified from the culture medium of an indoor air mold, Aspergillus fumigatus. One of these compounds was identified as gliotoxin, a known fungal secondary metabolite. Growth of A. fumigatus and gliotoxin production on some building materials were also studied. Strong growth of the mold and the presence of gliotoxin were detected on spruce wood, gypsum board, and chipboard under saturation conditions.     

Sensor systems for medical application based on hemoproteins and nanocomposite materials

Recent advances in nanotechnologies resulted in significant progress in the development of sensor systems based on nanocomposite materials. This review summarizes own and literature data on the sensor system based on hemoproteins which are functionally important for medicine. Special attention is paid to the electrochemical nanobiosensors and principles of functioning of the nanobiosensor medical systems.     

The application of preirradiation combustion and neutron activation analysis technique for the determination of iodine in food and environmental reference materials

The pre-irradiation combustion (PC) of samples to liberate iodine, followed by trapping the iodine on charcoal and quantifying the element by neutron activation analysis (NAA), has been used at the National Institute of Standards and Technology for the determination of iodine in biological materials. The applicability of this technique to numerous environmental and dietary matrices is illustrated by analysis of a range of certified reference materials (CRMs) and a powdered grass material that was prepared as an in-house reference material (RM). Because of the combustion step involved, samples with low or no fat content (e.g., cereal products, selected botanical specimens, and nonfat milk powder) and inorganic materials (e.g., coal fly ash and dried sediments) are more suited for analysis by this method. In general, the results for several types of samples obtained by this method agreed with those obtained by a second radiochemical (R) NAA, as well as by a third method using inductively coupled plasma mass spectrometry (ICP-MS). PC-NAA is a useful technique for determining iodine in biological and environmental samples, especially for verification of iodine results obtained from other methods.     

Mould growth on building materials under low water activities. Influence of humidity and temperature on fungal growth and secondary metabolism

The influence of relative humidity (RH) and temperature on growth and metabolism of eight microfungi on 21 different types of building material was investigated. The fungi were applied as a dry mixture to the materials, which were incubated at 5°C, 10°C, 20°C and 25°C at three humidity levels in the range 69–95% RH over 4–7 months. The lower limit for fungal growth on wood, wood composites and starch-containing materials was 78% RH at 20–25°C and increased to 90% RH at 5°C. An RH of 86% was necessary for growth on gypsum board. Ceramic materials supported growth at RH >90%, although 95% RH was needed to yield chemically detectable quantities of biomass. Almost exclusively only Penicillium, Aspergillus and Eurotium (contaminant) species grew on the materials. Production of secondary metabolites and mycotoxins decreased with humidity and the quantities of metabolites were insignificant compared with those produced at high RH (RH >95%), except in the case of Eurotium.     

基于小波变换的土壤有机质含量高光谱估测术

利用统计分析方法选取了土壤N、P、K元素含量近似而有机质含量差异较大的样本60个,通过高光谱探测分析获得样本反射率对数的一阶导数光谱,采用Bior 1.3函数进行多层离散小波分解,剔除低频近似信号和高频噪声信号,得到反映土壤理化参数的特征光谱曲线;采用相关分析筛选土壤有机质含量的显著相关波段,基于显著相关波段和特征光谱曲线分别构建土壤有机质含量高光谱多元回归估测模型;通过比较分析,确定了提取土壤有机质特征光谱的最佳小波分解尺度并构建了最佳预测模型.结果表明:提取土壤有机质特征光谱的最佳小波分解层数是9层,其次是8层和10层;基于小波9层分解特征光谱曲线的有机质含量估测模型最佳,其决定系数(R2)为0.89,比基于显著相关波段构建模型的R2增加了0.31,比基于原始光谱所构建模型的R2增加了0.10.     

The combination effects of phenolic compounds and fluconazole on the formation of ergosterol in Candida albicans determined by high-performance liquid chromatography/tandem mass spectrometry

A liquid chromatography/tandem mass spectrometry (LC/MS) with atmospheric pressure chemical ionization (APCI) for the quantification of ergosterol, lanosterol, and squalene was developed to evaluate the combination effects of phenolic compounds with fluconazole on ergosterol biosynthesis in Candida albicans. The three analytes were separated by a column of C18 and were quantified without interference with each other using positive mode tandem mass spectrometry (MS/MS). Molecular ions of ergosterol and lanosterol were detected as the [M+H-H2O]+ ion species at m/z 380 and 410, whereas squalene appeared as the [M+H]+ ion species at m/z 412. On fragmentation of ergosterol, lanosterol, and squalene, the product ions at m/z 69, 149, and 109, respectively, were present as major fragments. These product ions were used for the quantification of them in multiple reaction monitoring acquisition mode. The relationship between signal intensity and the analytes' concentration was linear over the concentration range of 0.05-10 microg/ml. Following the treatment of C. albicans with fluconazole in combination with albicanyl caffeate, resveratrol, and 3,4'-difluorostilbene, respectively, the content of ergosterol in both the sensitive and resistant C. albicans showed depletion, whereas the squalene showed accumulation especially in the sensitive isolates determined with the method developed.     

High-cell-density cultivation for co-production of ergosterol and reduced glutathione by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Two different high-cell-density cultivation processes based on the mutant Saccharomyces cerevisiae GE-2 for simultaneous production of glutathione and ergosterol were investigated. Compared with keeping the ethanol volumetric concentration at a constant low level, feedback control of glucose feeding rate (F) by keeping the descending rate of ethanol volumetric concentration (ΔE/Δt) between −0.1% and 0.15% per hour was much more efficient to achieve a high glutathione and ergosterol productivity. This bioprocess overcomes some disadvantages of traditional S. cerevisiae-based cultivation process, especially shortening cultivation period and making the cultivation process steady-going. A classical on or off controller was used to manipulate F to maintain ΔE/Δt at its set point. The dry cell weight, glutathione yield and ergosterol yield reached 110.0 ± 2.6 g/l, 2,280 ± 76 mg/l, and 1,510 ± 28 mg/l in 32 h, respectively.     

Anin vitro model for the biological evaluation of dental materials using human periodontal ligament cells

Anin vitro system is described which uses human diploid cells derived from the periodontal ligament. It simulates the clinical situation and is suitable for rapid cytotoxicity screening of dental materials. It can also be adapted to study various factors influencing biocompatibility.     

Synthesis and characterization of two new metal-organic materials based on In/btec

Two new metal-organic materials, In(2,2′-bipy)(btec)_0.5Cl (1) and In₂(phen)₄(Hbtec)₂ (2) (btec = 1,2,4,5-benzenetetracarboxylate, 2,2′-bipy = 2,2′-bipyridyl, phen = 1,10-phenanthroline) have been synthesized under mild hydrothermal condition. Their structures were determined by single-crystal X-ray diffraction and further characterized by X-ray powder diffraction, thermogravimetric analysis, IR, fluorescence spectroscopy, inductively coupled plasma (ICP) and elemental analysis. The structural analysis reveals that compound 1 exhibits a novel wavelike 2D layer with unusual contorted rhombic grids, while compound 2 possesses dinuclear In₂(phen)₄(Hbtec)₂ complex molecules. It is noteworthy that their structures finally extend to the higher dimensional supramolecular framework structures through the π-π stacking interactions of N-donor ligands. Additionally, these two compounds show strong fluorescence in the solid state at room temperature.     

A voltammetric immunosensor based on nanobiocomposite materials for the determination of alpha-fetoprotein in serum

The development of a voltammetric immunosensor for determination of alpha-fetoprotein (AFP) in serum is presented. ELISA assays with voltammetric reading were carried out exploiting the peculiar properties of nanobiocomposite materials based on gold nanoparticles for the immobilization of Antibody (Ab)/Antigen/Antibody-HRP (Horseradish Peroxidase) sandwich on the glassy carbon (GC) electrode surface. The electrochemical transduction was mediated by thionin, which was used in its monomeric form dissolved in the reading solution, so avoiding critical immobilization procedures. The study was aimed at the development and validation of an immunosensor able to provide results in short time, simple to use, rugged and cost-effective for AFP monitoring purposes. A crucial aspect of the study was the development of an experimental protocol leading to highly standardized and consequently reproducible sensors. Two-way analysis of variance (ANOVA) was applied to study the effect of the concentration of the solutions used for the incubation of the antibodies. The sensor was validated in serum assessing stability of the immunocomplex, linearity of response, limit of detection (3.7 ng/ml) and limit of quantitation (11 ng/ml), precision (intra- and inter-sensor repeatability) and recovery rate (103%). The stability of the GC/Ab functionalized substrate was demonstrated over one month, showing variation coefficients below 5%. Experiments carried out with real samples of clinical interest evidenced that the developed immunosensor can be considered as powerful tool in cancer screening programmes.     

An application of Lacker's mathematical model for the prediction of ovarian response to superstimulation

Introduction. A mathematical model of ovarian follicular growth is applied to the problem of predicting ovarian response in a superstimulation protocol. Methods. Fifty-four women enrolled in an ovarian superstimulation program of therapy for the amelioration of idiopathic infertility had their ovarian cycles synchronized by taking Demulen 30 for two weeks prior to the study. Daily ultrasonographic imaging, measurements of serum estradiol and doses of hMG began on day 5 after the patients stopped taking Demulen. The diameters of individual follicles were measured and followed daily. When the largest follicle attained a diameter of 19 mm, hCG was given to induce ovulation. Individual follicle growth data were fit to a mathematical model of ovarian follicle maturation and the resulting parameters were used to classify patients into low and high ovarian response groups. Results. The parameters computed from the mathematical model fit were found to be predictive of ovarian response with a sensitivity of 71% and a specificity of 70%. The parameters were also meaningful within the context of the original mathematical model and have value for determining how doses of hMG may be adjusted during the course therapy to increase the ovarian response in individuals. Conclusion. Mathematical modeling of ultrasonographically derived follicular growth data has significant potential for clinical application in ovarian superstimulation protocols. The method of fitting follicular growth data to a mathematical follicle maturation surface furthermore provides a straightforward approach for the characterization of ovarian follicular dynamics in general.