Characterization of an exopolysaccharide mutant of Nostoc spongiaeforme: Zn2+-sorption and uptake

Exposure of the exopolysaccharide (EPS)-synthesizing cyanobacterium Nostoc spongiaeforme to Zn²⁺ (20 M) transformed the biomass into white debris. However, a few blue–green pin-heads emerged after 2 weeks in the same Zn²⁺-containing medium and formed less mucoid microcolonies (1–2 mm) relative to the protruding colonies (2–4 mm) of the parent strain on nutrient agar. One of such survivors (designated as Zn₂₀) that was stable through 10 successive transfers in Zn²⁺-lacking medium has been adopted for further characterization. The parent strain retained almost 88% of the total EPS synthesized, the rest being released into the ambient medium, while for Zn₂₀, the EPS retained approximated to 74%. Although the Zn²⁺-sensitivity of the mutant was comparable with that of the parent (LD₅₀, 7 M), Zn²⁺ uptake was still 5-fold higher in the former (2 g mg^–1 biomass dry wt., 20 M, external concentration). Also, both the strains showed insignificant difference in Zn²⁺-sorption onto their isolated EPS. The mutant was characterized by having higher cell carbohydrate content (642.8 g mg^–1 dry wt.) than its parent (513.6 g). The X-ray diffraction pattern revealed Zn²⁺ deposition on EPS from the parent mainly as zinc hypophosphite monohydrate [Zn(H₂PO₂)₂·H₂O], whereas there was a lack of distinct peaks in similar samples from Zn₂₀, thus confirming the amorphous nature. There was participation in Zn²⁺ binding of only COO^–, N=O, NO₂, SO₂ groups in the parent while participation of P—O and C=O groups in mutant EPS was evident in IR spectra. The observations suggest that the mutant could be deployed to achieve sustained EPS synthesis, its release and metal sorption/desorption in repeated cycles.     

Repeated removal of cadmium and zinc from an industrial effluent by waste biomass Sargassum sp.

Waste biomass Sargassum sp. biosorbed 100% of Cd²⁺ and 99.4% of Zn²⁺ from a 3 and 98 mg l^–1 solution (pH 4.5), respectively, at the end of four serial experiments. Of the five desorbents studied in consecutive adsorption/desorption cycles, CaCl₂ 0.05 M eluted nearly 40% of both metals and decreased the biosorption in only 8% and 17% of Cd²⁺ and Zn²⁺, respectively. Although NaOH desorbent improved the heavy metal uptake from the second cycle onwards, it did not elute metals from the pre-loaded biomass.     

Establishment of Orthosiphon stamineus Cell Suspension Culture for Cell Growth

Callus of Orthosiphon stamineus could be induced successfully from petiole, leaf and stem tissues but not roots when cultured on MS medium containing different concentration of NAA (0–4.0 mg l^–1) and 2,4-D (0–2.0 mg l^–1). Highest fresh weight callus production was obtained from leaf explants and those with best friability were obtained on MS medium plus 1.0 mg l^–1 2,4-D plus 1.0 mg l^–1 NAA. Cell suspension cultures were established from these cultures. The appropriate cell inoculum size for the best cell growth was 0.75 g of cells in 20 ml culture medium. Cell suspension culture using MS medium supplemented with 1.0 mg l^–1 2,4-D promoted the best cell growth with maximum biomass of 8.609 g fresh weight and 0.309 g dry weight 24 days after inoculation. Cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D reached the stationary growth phase in 15 days as compared to the cells that grew in MS medium supplemented with 1.0 mg l^–1 2,4-D + 1.0 mg l^–1 NAA reached the stationary phase in 24 days. MS medium supplemented with 1.0 mg l^–1 2,4-D was considered as the maintenance medium for maintaining the optimum cell growth of O. stamineus in the cell suspension cultures with 2-week interval subculture.     

Efficient GA3-assisted plant regeneration from cell suspensions of three grape genotypes via somatic embryogenesis

Petioles from in vitro grown plants of interspecific grapevine hybrids cvs `Bianca', `Podarok Magaracha' and `Intervitis Magaracha' were cultured on solid NN medium supplemented with 2,4-D and BA at various concentrations. The callus developed was cultured in liquid NN medium supplemented with 0.5 mg l<sup>–1</sup> BA to induce formation of somatic embryos. Somatic embryos of globular and heart-stage developed in suspensions of `Podarok Magaracha' and `Intervitis Magaracha'. In contrast, `Bianca' did not undergo embryogenesis beyond globular stage. This made it necessary to perform subculture of the suspensions to HTE liquid medium supplemented with 0.2 mg l^–1 BA for the development of globular embryos into heart stage. Heart-stage embryos developed into torpedo-stage after subculturing suspensions of all three cultivars to liquid HTE medium supplemented with 0.1 mg l^–1 IAA and 30 mg l^–1 sodium hummate. Torpedo-stage embryo suspensions were subcultured in liquid HTE medium supplemented with 0.5 mg l^–1 BA, 0.5 mg l^–1 GA₃ and 0.5 mg l^–1 GA₃ + 0.2 mg l^–1 BA. After 12 days of incubation, plantlets were cultured on solid M2MS medium: without growth regulators and with 0.5 mg l^–1 BA. Plantlets that developed in liquid HTE media with 0.5 mg l^–1 GA₃ or 0.5 mg l^–1 GA₃ + 0.2 mg l^–1 BA produced 82–90% shoots on solid M2MS medium with 0.5 mg l^–1 BA after 50 days of culture.     

Zinc and lead uptake by mycelium and regenerating protoplasts of Verticillium marquandii

The ability of the filamentous fungus Verticillium marquandii for Zn²⁺ and Pb²⁺ uptake from aqueous solution was studied. The 24-h-old living mycelium bound Zn²⁺ and Pb²⁺ (206.2 and 324.5 mg/g dry weight, respectively) effectively, in contrast to a very low Zn²⁺ uptake by autoclaved mycelium (20.2 mg/g). The most effective results were noted when the metals were introduced as acetates and incubated with mycelium for 24 h in case of Zn²⁺ while Pb²⁺ achieved the maximum level of metal binding after as early as 3 h. The cell wall was the main site of effective Zn²⁺ and Pb²⁺ binding by V. marquandii mycelium (91.0–93.6% of metals were located in cell wall after 24 h of exposure). The metabolic inhibitors: antimycin A and sodium azide had a strong limitation effect on Zn²⁺ uptake by a 24-h-old living mycelium, whereas Pb²⁺ binding did not decrease to a large extent. The freshly obtained protoplasts accumulated Zn²⁺ and Pb²⁺ on a low level in comparison with cells at different stages of cell wall regeneration. The use of regenerating protoplasts showed that resynthesis of cell wall was necessary for high binding of Zn²⁺, whereas Pb²⁺ uptake on the significant level took place during cell wall regeneration. This revised version was published online in August 2006 with corrections to the Cover Date.     

In vitro regeneration from bulb explants of Indian squill,Urginea indica Kunth

Callus cultures were established from bulb explants of diploid Urginea indica Kunth (Indian squill) on a modified basal medium of Murashige and Skoog (1962) supplemented with either 2 mg/l^-1 2,4-D+15% (v/v) CM or 4 mg/l^-1 2,4-D+2 mg/l^-1 NAA+2 mg/l^-1 KN+1 g/l^-1 YE. Shoot primordia developed after 2–3 subcultures in that medium. Increased growth of shoot primordia was obtained in media containing less auxins and vitamins. Rooted bulbous plantlets obtained were maintained in MS medium with 0.5% sucrose.Adventitious shoots were induced from adaxial epidermal cells of outer scales of regenerated bulbs used as secondary expiants in presence of 1 mg/l^-1 of 2,4-D with slightly higher concentration of the three vitamins of MS medium. From each scale leaf, approximately 400 bulblets were produced in 18 weeks in liquid culture. 90% of the plants transferred to potted soil have survived.     

Synthesis of recombinant human interleukin-2 via controlled feed of lactose-complex media in fed-batch cultures of Escherichia coli BL21(DE3)[pT7-G3IL2]

Using lactose as an inducer, recombinant human interleukin-2 (rhIL-2) was synthesized with an N-terminus fusion partner, G3 (three tandem-arranged glucagon peptides) in fed-batch cultures at high cell concentration (60–90 g l^–1) of Escherichia coli BL21(DE3) [pT7-G3IL2]. With batch additions of lactose (4 × 13.5 g), the fusion rhIL-2 was synthesized up to 9.3 g l^–1. However, if all the lactose (54 g) was added at once to the culture, synthesized fusion rhIL-2 decreased to 5.4 g l^–1 with a decreased cell growth rate. A statistical optimization of the production medium containing glucose, yeast extract, and lactose led to fusion rhIL-2 being produced at > 9 g l^–1.     

Influence of inorganic microelements on the production of camptothecin with suspension cultures of <Emphasis Type="Italic">Camptotheca acuminata</Emphasis>

The effects of eight microelements (I^–, BO₃ ^3–, MoO₄ ^2–, Co²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺) on the biosynthesis of camptothecin and the growth of suspension cultures of Camptotheca acuminata were studied. The increase of I^– to 25 M l^–1, Cu²⁺ to 1 M l^–1, Co²⁺ to 2 M l^–1 and MoO₄ ^2– to 10 M l^–1 in Murashige and Skoog (MS) medium resulted in 1.66, 2.84, 2.53 and 2.04 times higher of camptothecin yield than that in standard MS medium respectively. Combined treatment of I^– (25 M l^–1), Cu²⁺ (1 M l^–1), Co²⁺ (2 M l^–1) and MoO₄ ^2– (10 M l^–1) lead to improve cell dry weight, camptothecin content, and camptothecin yield to 30.56 g l^–1, 0.0299%, and 9.15 mg l^–1, respectively, which were 20.2, 208.9 and 273.8% increment respectively when compared with those of control.     

Plant regeneration from suspension cultures of Hosta sieboldiana

Systems for establishing suspension cultures and for inducing plant regeneration from these cultures for the Liliaceous ornamental plant, Hosta sieboldiana (Lodd.) Engl. have been developed. Pale-yellow and nodular calluses were induced from more than 20% of scape segments on MS medium containing 1 mg l^–1 picloram (PIC), 30 g l^–1 sucrose, and 2 g l^–1 gellan gum. Upon transfer of calluses to the same medium lacking gellan gum, stably-growing suspension cultures were established after 1 month. Suspension cell clusters regenerated a large number of adventitious shoots following transfer to MS media containing 0.1 mg l^–1 NAA in combination with either BA or TDZ. Over 20 shoots per 0.3 g FW of cell clusters were obtained on media containing 0.1 mg l^–1 NAA and either 1 or 5 mg l^–1 TDZ. Shoots rooted easily on plant growth regulator (PGR)-free MS medium, and plantlets were successfully transferred to soil. Plants showed no visible morphological alterations and maintained the diploid level as indicated by flow cytometric analysis.     

Isolation and study of two strains ofLeptospirillum-like bacteria from a natural mixed population cultured on a cobaltiferous pyrite substrate

Two strains ofLeptospirillum-like bacteria, L6 and L8, have been isolated from a mixed inoculum, also containingThiobacillus ferrooxidans andT. thiooxidans, cultured for one year with a colbaltiferous pyrite as energy substrate in a 100 I continuous bioleaching laboratory unit. Several physiological properties of the strains are described. The vibrio-shaped microorganisms grew at pH values lower than 1.3. Their growth rate was maximum between 2.5 and 8.0 g l¹ ferrous iron. The optimal growth temperature was 37.5° C. Ferric iron had a stimulative effect on bacterial development up to 8 g l^–1, and growth was as rapid at 14 g l^–1 ferric iron as at 8 g l^–1. The negative influence of cobalt on the final cell concentration was observed at 0.5 g l^–1, but the growth rate was not affected up to 2 g l^–1. The G + C content of strains L8 is 55.6 mol%.     

Evaluation of the potential of Aspergillus niger species for the bioconversion of L-phenylalanine into 2-phenylethanol

Aspergillus niger was explored, for the first time, for the production of 2-phenylethanol (a rose-like aroma) using L-phenylalanine as precursor. Among the strains screened, A. niger CMICC 298302 was shown to produce, in a culture medium containing 6 g L-phenylalanine l^–1 and 60 g glucose l^–1, 1375 mg 2-phenylethanol l^–1 with a productivity of 153 mg l^–1 day^–1 and a molar yield of 74%. 2-Phenylethanol concentrations of 1 to 2 g l^–1 led to a two-fold and ten-fold decrease, respectively, in the mycelial radial growth rate. However, 2-phenylethanol was synthesized as the sole aromatic product and accumulated in the culture broth.     

Phytase production by the yeast, Pichia anomala

Pichia anomala, isolated from dried flower buds of Woodfordia fruticosa, produced a high activity of an intracellular phytase, at 68 U per g dry biomass, when grown at 20 °C for 24 h in a medium containing glucose (40 g l^–1) and beef extract (10 g l^–1) supplemented with Fe²⁺ (0.15 mM). Partially purified phytase was optimally active at 60 °C and pH 4 with a half life of 7 days at 60 °C. It retained 85% of its activity at 80 °C for 15 min. The enzyme is suitable for supplementing animal feeds to improve the availability of phosphate from phytate.     

Culture conditions of tannase production by Lactobacillus plantarum

Lactobacillus plantarum produced an extracellular tannase after 24 h growth on minimal medium of amino acids containing 2 g tannic acid l^–1. Enzyme production (6 U ml^–1) was optimal at 37 °C and pH 6 with 2 g glucose l^–1 and 7 g tannic acid l^–1 in absence of O₂.     

Adsorption of Ni2+ on the surface of molecularly imprinted adsorbent from Penicillium chysogenum mycelium

The adsorption capacity for Ni²⁺ on to the surface molecular imprinting adsorbent on Penicillium chysogenum mycelium (the surface-imprinted adsorbent) was 40–45 mg g^–1 (using 200 mg Ni²⁺ l^–1), two times of the mycelium adsorbent. The surface-imprinted adsorbent had good stability at pH 28. The optimal concentration of EDTA for desorption was 0.1 to 0.5 g l^–1. The surface imprinted adsorbent could be reused 15 times without losing its uptake.     

A reproducible procedure for plant regeneration from seedling hypocotyl protoplasts of Vigna sublobata L.

Viable protoplasts of Vigna sublobata L. were isolated enzymatically from hypocotyls of axenic seedlings. Protoplast yields were dependent upon seedling age, with maximum yields (2.25 ± 0.35 × 10⁶ g fwt^–1) from seedlings aged 6 d. Protoplasts regenerated cell walls and underwent sustained divisions when cultured in either agarose-solidified or liquid K8P medium. The plating density affected the division frequency and plating efficiency; the division frequency (68 ±0 6.0%) was maximum at 4.0 × 10⁴ ml^–1 while plating efficiency was maximum (1.3 ± 0.1%) at 5.0 × 10⁴ ml^–1. Dividing protoplasts developed into microcalli, which produced glossy green compact nodular calli on transfer to 8.0 gl^–1 w/v agar-solidified medium containing MS salts, B5 organic components, 30 g l^–1 sucrose, NAA (0.2–0.5 mg l^–1), zeatin riboside (0.5–2.0 mg l^–1) and GA₃ (0.5–1.0 mg l^–1). These calli, after sub-culture on the same medium, produced shoot buds which underwent elongation following transfer of tissues to 6.0 g l^–1 agar-solidified B5 medium containing 30g l^–1 sucrose, IBA (0.01 mg l^–1) and BAP (1.0 mg l^–1). Elongated shoots developed roots after transfer to 8.0g l^–1 agar-solidified, hormone-free MS medium with 30 g l^–1 sucrose.Abbreviations IAA indole-3-acetic acid - IBA indole-3-butyric acid - BAP 6-benzyladenine or benzylaminopurine - B5 medium after Gamborg et al (1968) - 2,4-D 2,4-dichlorophenoxyacetic acid - GA³ gibberellic acid - 2,i-P 6-(--dimethylallylamino) purine - MS medium after Murashige and Skoog (1962) - NAA 1-naphthaleneacetic acid     

Sequential liquid-liquid extraction of d-amino acid oxidase from Trigonopsis variabilis

A method for isolation of d-amino acid oxidase (DAAO) from disrupted Trigonopsis variabilis cells has been developed. In an aqueous two-phase system consisting of PEG6000 (220 g l^–1), potassium phosphate (110 g l^–1, K₂HPO₄ + KH₂PO₄ = 10.1:1, mol mol^–1) and dl-methionine (11 g l^–1), the major portion of cellular proteins (87%) was partitioned into the salt phase. By sequential extraction, 48% of DAAO was recovered in PEG phase, giving a yield of 211 U mg protein^–1.     

Enhancement of lactic acid production with ram horn peptone by Lactobacillus casei

Ram horns are a waste material from the meat industry. The use of ram horn peptone (RHP) as a supplement for lactic acid production was investigated using Lactobacillus casei. For this purpose, first, RHP was produced. Ram horns were hydrolysed by treating with acids (3 M H₂SO₄ and 6 M HCl) and neutralizing the solutions to yield ram horn hydrolysate (RHH). The RHH was evaporated to yield RHP. The amounts of protein, nitrogen, ash, some minerals, total sugars, total lipids and amino acids of the RHP were determined and compared with a bacto-tryptone from casein. When the concentrations (1–6% w/v) of the RHP were used in bacterial growth medium as a supplement, 2% RHP (ram horn peptone medium) had a maximum influence on the production of lactic acid by L. casei. The content of lactic acid in the culture broth containing 2% RHP (43 g l^–1) grown for 24 h was 30% higher than that of the control culture broth (33 g l^–1) and 10% higher than that of 2% bacto-tryptone (39 g l^–1). RHP was demonstrated to be a suitable supplement for production of lactic acid. This RHP may prove to be a valuable supplement in fermentation technology.     

Batch propagation of Lactobacillus helveticus for production of lactic acid from lactose concentrated cheese whey with microaeration and nutrient supplementation

Continuous mix batch bioreactors were used to study the kinetic parameters of lactic acid fermentation in microaerated-nutrient supplemented, lactose concentrated cheese whey using Lactobacillus helveticus. Four initial lactose concentrations ranging from 50 to 150 g l^–1 were first used with no microaeration and no yeast extract added to establish the substrate concentration above which inhibition will occur and then the effects of microaeration and yeast extract on the process kinetic parameters were investigated. The experiments were conducted under controlled pH (5.5) and temperature (42 °C) conditions. The results indicated that higher concentrations of lactose had an inhibitory effect as they increased the lag period and the fermentation time; and decreased the specific growth rate, the maximum cell number, the lactose utilization rate, and the lactic acid production rate. The maximum lactic acid conversion efficiency (75.8%) was achieved with the 75 g l^–1 initial lactose concentration. The optimum lactose concentration for lactic acid production was 75 g l^–1 although Lactobacillus helveticus appeared to tolerate up to 100 g l^–1 lactose concentration. Since the lactic acid productivity is of a minor importance compared to lactic acid concentration when considering the economic feasibility of lactic acid production from cheese whey using Lactobacillus helveticus, a lactose concentration of up to 100 g l^–1 is recommended. Using yeast extract and/or microaeration increased the cell number, specific growth rate, cell yield, lactose consumption, lactic acid utilization rate, lactic acid concentration and lactic acid yield; and reduced the lag period, fermentation time and residual lactose. Combined yeast extract and microaeration produced better results than each one alone. From the results it appears that the energy uncoupling of anabolism and catabolism is the major bottleneck of the process. Besides lactic acid production, lactose may also be hydrolysed into glucose and galactose. The -galactosidase activity in the medium is caused by cell lysis during the exponential growth phase. The metabolic activities of Lactobacillus helveticus in the presence of these three sugars need further investigation.     

Formation of phenylethanoid glycosides by Cistanche deserticola callus grown on solid media

The optimal growth of Cistanche deserticola callus and formation of phenylethanoid glycosides (PeG) was at 25°C with light irradiation intensity of 24 mol m^–2 s^–1 on solidified B5 media supplemented with 0.5 mg 6-benzylaminopurine l^–1, 10 mg gibberellin l^–1, 800 mg casein hydrolysate l^–1 and 20 g sucrose l^–1. After 30 d culture, the biomass reached 15.5 g dry wt callus l^–1 medium and its PEG content was 10.7% (w/w). The PeG content was 42%–127% higher than those in explants.     

Efficient Regeneration of Curcuma amada Roxb. Plantlets from Rhizome and Leaf Sheath Explants

Efficient and simple protocols were developed for conversion of embryos derived from microspores in rape. The frequency of embryo conversion was higher than 80% on improved media without pretreatments using ABA, GA₃ or desiccation, which had been required before embryos were transferred to solid media for conversion. While on basal media such as 1/2MS, the conversion frequency was no more than 32%. Two groups of embryos at different developmental stages, 7 mm embryos and 3 mm embryos, were used as material to select the most suitable medium. Different components were required for successful conversion of the two groups of embryos. For 7 mm embryos 1/2MS medium with Ca²⁺ concentration of 900 mg l^–1 was optimal, while for 3 mm embryos, 1/2 MS_N+V+Ca (half strength MS with 450 mg l^–1 CaCl₂·2H₂O, 100 mg l^–1 NH₄NO₃ and enhanced vitamins) was a suitable medium. The results indicate that calcium may play an important role in the conversion of embryos derived from microspores, and can replace, to some extent, the practice of drying and growth supplements, which have been widely used for maturation, and desiccation of embryos.