Superadditive and subadditive effects of "hot spot" mutations within the interfaces of placental ribonuclease inhibitor with angiogenin and ribonuclease A.

Previous single-site mutagenesis studies on the complexes of ribonuclease inhibitor (RI) with angiogenin (Ang) and RNase A suggested that in both cases a substantial fraction of the binding energy is concentrated within one small part of the crystallographically observed interface, involving RI residues 434-438. Such energetic "hot spots" are common in protein-protein complexes, but their physical meaning is generally unclear. Here we have investigated this question by examining the detailed interactions within the RI.ligand hot spots and the extent to which they function independently. The effects of Phe versus Ala substitutions show that the key residue Tyr434 interacts with both ligands primarily through its phenyl ring; for Tyr437, the OH group forms the important contacts with RNase A, whereas the phenyl group interacts with Ang. Kinetic characterization of complexes containing multiple substitutions reveals striking, but distinctive, cooperativity in the interactions of RI with the two ligands. The losses in binding energy for the RNase complex associated with replacements of Tyr434 and Asp435, and Tyr434 and Tyr437, are markedly less than additive (i.e., by 2.4 and 1.3 kcal/mol, respectively). In contrast, the energetic effects of the 434 and 435, and 434 and 437, substitution pairs on binding of Ang are fully additive and 2.5 kcal/mol beyond additive, respectively. Superadditivities (0.9-2.4 kcal/mol) are also observed for several multisite replacements involving these inhibitor residues and two Ang residues, Arg5 and Lys40, from this part of the interface. Consequently, the decreases in binding energy for some triple-variant complexes are as large as 8.5-10.1 kcal/mol (compared to a total DeltaG of -21.0 kcal/mol for the wild-type complex). Potential explanations for these functional couplings, many of which occur over distances of >13 A and are not mediated by direct or triangulated contacts, are proposed. These findings show that the basis for the generation of hot spots can be complex, and that these sites can assume significantly more (as with Ang) or less (as with RNase) importance than indicated from the effects of single-site mutations.     

R-subunit isoform specificity in protein kinase A: distinct features of protein interfaces in PKA types I and II by amide H/2H exchange mass spectrometry

The two isoforms (RI and RII) of the regulatory (R) subunit of cAMP-dependent protein kinase or protein kinase A (PKA) are similar in sequence yet have different biochemical properties and physiological functions. To further understand the molecular basis for R-isoform-specificity, the interactions of the RIIβ isoform with the PKA catalytic (C) subunit were analyzed by amide H/²H exchange mass spectrometry to compare solvent accessibility of RIIβ and the C subunit in their free and complexed states. Direct mapping of the RIIβ-C interface revealed important differences between the intersubunit interfaces in the type I and type II holoenzyme complexes. These differences are seen in both the R-subunits as well as the C-subunit. Unlike the type I isoform, the type II isoform complexes require both cAMP-binding domains, and ATP is not obligatory for high affinity interactions with the C-subunit. Surprisingly, the C-subunit mediates distinct, overlapping surfaces of interaction with the two R-isoforms despite a strong homology in sequence and similarity in domain organization. Identification of a remote allosteric site on the C-subunit that is essential for interactions with RII, but not RI subunits, further highlights the considerable diversity in interfaces found in higher order protein complexes mediated by the C-subunit of PKA.     

Mutational analysis of the complex of human RNase inhibitor and human eosinophil-derived neurotoxin (RNase 2)

RNase inhibitor (RI) binds diverse proteins in the pancreatic RNase superfamily with extremely high avidity. Previous studies showed that tight binding of RNase A and angiogenin (Ang) is achieved primarily through interactions of hot spot residues in the 434-460 C-terminal segment of RI with the enzymatic active site; Asp435 of RI forms key hydrogen bonds with the catalytic lysine in both complexes, whereas the other contacts are largely distinctive. Here we have investigated the structural basis for recognition of a third ligand, eosinophil-derived neurotoxin (EDN), by single-site and multisite mutagenesis. Surprisingly, Ala replacement of Asp435 decreases affinity for EDN only by 14-fold, as compared to the several hundred-fold decreases with RNase A and Ang, and individual mutations of three other hot spot residues-Tyr434, Tyr437, and Ser460-have essentially no effect. Ala substitutions of nine additional residues, selected by examining a computational model of the RI.EDN complex, also have no marked impact. Overall, the losses in affinity for the single-residue variants examined account for only approximately 25% of the free energy of binding for the complex. However, multisite mutagenesis of RI reveals strong superadditivity of mutational effects, indicating that part of this shortfall reflects negative cooperativity. Replacement of Tyr434 together with Asp435 or Tyr437 increases K(i) by 540- and 290-fold, respectively. Thus, the C-terminal region of RI again plays an important role in ligand recognition, although probably smaller than for binding RNase A and Ang. Simultaneous substitutions of three neighboring tryptophans (261, 263, and 318) on RI attenuate affinity even more dramatically (by 4900-fold), indicating that the interactions of this RI region also contribute a considerable amount of the binding energy for the EDN complex. These findings highlight the potential importance of cooperativity in protein-protein interactions and the consequent limitations of single-site mutagenesis for assessing interface energetics.     

Fluorescence assay for the binding of ribonuclease A to the ribonuclease inhibitor protein

Ribonuclease A (RNase A) and the ribonuclease inhibitor protein (RI) form one of the tightest known protein-protein complexes. RNase A variants and homologues, such as G88R RNase A, that retain ribonucleolytic activity in the presence of RI are toxic to cancer cells. Herein, a new and facile assay is described for measuring the equilibrium dissociation constant (K(d)) and dissociation rate constant (k(d)) for complexes of RI and RNase A. This assay is based on the decrease in fluorescence intensity that occurs when a fluorescein-labeled RNase A binds to RI. To allow time for equilibration, the assay is most readily applied to those complexes with K(d) values in the nanomolar range or higher. Using this assay, the value of K(d) for the complex of RI with fluorescein-labeled G88R RNase A was determined to be 0.55 +/- 0.03 nM. In addition, the value of K(d) was determined for the complex of RI with unlabeled G88R RNase A to be 0.57 +/- 0.05 nM by using a competition assay with fluorescein-labeled G88R RNase A. Finally, the value of k(d) for the complex of RI with fluorescein-labeled G88R RNase A was determined to be (7.5 +/- 0.4) x 10(-3) s(-1) by monitoring the increase in fluorescence intensity upon dissociation. This assay can be used to characterize complexes of RI with a wide variety of RNase A variants and homologues, including those with cytotoxic activity.     

Realizing the allosteric potential of the tetrameric protein kinase A RIα holoenzyme

PKA holoenzymes containing two catalytic (C) subunits and a regulatory (R) subunit dimer are activated cooperatively by cAMP. While cooperativity involves the two tandem cAMP binding domains in each R-subunit, additional cooperativity is associated with the tetramer. Of critical importance is the flexible linker in R that contains an inhibitor site (IS). While the IS becomes ordered in the R:C heterodimer, the overall conformation of the tetramer is mediated largely by the N-Linker that connects the?D/D domain to the IS. To understand how the N-Linker contributes to assembly of tetrameric holoenzymes, we engineered a monomeric RIα that contains most of the N-Linker, RIα(73-244), and crystallized a holoenzyme complex. Part of the N-linker is now ordered by interactions with a symmetry-related dimer. This complex of two symmetry-related dimers forms a tetramer that reveals novel mechanisms for allosteric regulation and has many features associated with full-length holoenzyme. A model of the tetrameric holoenzyme, based on this structure, is consistent with previous small angle X-ray and neutron scattering data, and is validated with new SAXS data and with an RIα mutation localized to a novel interface unique to the tetramer.     

The role of MukE in assembling a functional MukBEF complex

The MukB-MukE-MukF protein complex is essential for chromosome condensation and segregation in Escherichia coli. The central component of this complex, the MukB protein, is related functionally and structurally to the ubiquitous SMC (structural maintenance of chromosomes) proteins. In a manner similar to SMC, MukB requires the association of two accessory proteins (MukE and MukF) for its function. MukF is a constitutive dimer that bridges the interaction between MukB and MukE. While MukB can condense DNA on its own, it requires MukF and MukE to ensure proper chromosome segregation. Here, we present a novel structure of the E. coli MukE-MukF complex, in which the intricate crystal packing interactions reveal an alternative MukE dimerization interface spanning both N- and C-terminal winged-helix domains of the protein. The structure also unveils additional cross-linking interactions between adjacent MukE-MukF complexes mediated by MukE. A variant of MukE encompassing point mutations on one of these surfaces does not affect assembly of the MukB-MukE-MukF complex and yet cannot restore the temperature sensitivity of the mukE∷kan strain, suggesting that this surface may mediate critical protein-protein interactions between MukB-MukE-MukF complexes. Since the dimerization interface of MukE overlaps with the region of the protein that interacts with MukB in the MukB-MukE-MukF complex, we suggest that competing MukB-MukE and MukE-MukE interactions may regulate the formation of higher-order structures of bacterial condensin.     

The 1.85 A resolution crystal structures of tissue factor in complex with humanized Fab D3h44 and of free humanized Fab D3h44: revisiting the solvation of antigen combining sites

The outstanding importance of the antigen-antibody recognition process for the survival and defence strategy of higher organisms is in sharp contrast to the limited high resolution structural data available on antibody-antigen pairs with antigenic proteins. The limitation is the most severe for structural data not restricted to the antigen-antibody complex but extending to the uncomplexed antigen and antibody. We report the crystal structure of the complex between tissue factor (TF) and the humanized Fab fragment D3h44 at a resolution of 1.85 A together with the structure of uncomplexed D3h44 at the same resolution. In conjunction with the previously reported 1.7 A crystal structure of uncomplexed TF, a unique opportunity is generated to explore details of the recognition process. The TF.D3h44 interface is characterised by a high number of polar interactions, including as may as 46 solvent molecules. Conformational changes upon complex formation are very small and almost exclusively limited to the reorientation of side-chains. The binding epitope is in complete agreement with earlier mutagenesis experiments. A revaluation of two other antibody-antigen pairs reported at similar resolutions, shows that all these complexes are very similar with respect to the solvation of the interface, the number of solvent positions conserved in the uncomplexed and complexed proteins and the number of water molecules expelled from the surface and replaced by hydrophilic atoms from the binding partner upon complex formation. A strategy is proposed on how to exploit this high resolution structural data to guide the affinity maturation of humanised antibodies.     

Analysis of the interactions of human ribonuclease inhibitor with angiogenin and ribonuclease A by mutagenesis: importance of inhibitor residues inside versus outside the C-terminal "hot spot"

Ribonuclease inhibitor (RI) binds diverse mammalian RNases with extraordinary avidity. Here, we have investigated the structural basis for this tight binding and broad specificity by mutational analysis of the complexes of RI with angiogenin (Ang) and RNase A (K(D)=0.5 fM and 43 fM, respectively). Both crystal structures are known; the interfaces are large, and the ligands dock similarly, although few of the specific interactions formed are analogous. Our previous mutagenesis studies focused primarily on one contact region, containing RI 434-438 and the enzymatic active site. Many single-residue replacements produced extensive losses of binding energy (2.3-5.9 kcal/mol), suggesting that this region constitutes a "hot spot" in both cases. We have now explored the roles of most of the remaining RI residues that interact with Ang and/or RNase A. One major cluster in each complex lies in a Trp-rich area of RI, containing Trp261, Trp263, Trp318, and Trp375. Although the energy losses from individual replacements in this portion of the Ang complex were small-to-moderate (0-1.5 kcal/mol), the changes from multiple substitutions were much greater than additive, and the binding energy provided by this region is estimated to be approximately 6 kcal/mol (30 % of total). Effects of replacing combinations of hot spot components had also been found to be superadditive, and this negative cooperativity is now shown to extend to the neighboring contact residue RI Ser460. The overall contribution of the hot spot, taking superadditivity into account, is then approximately 14-15 kcal/mol. The hot spot and Trp-rich regions, although spatially well separated, are themselves functionally linked. No other parts of the RI-Ang interface appear to be energetically important. Binding of RNase A is more sensitive to substitutions throughout the interface, with free energy losses>/=1 kcal/mol produced by nearly all replacements examined, so that the sum of losses greatly exceeds the binding energy of the complex. This discrepancy can be explained, in part, by positive cooperativity, as evident from the subadditive effects observed when combinations of residues in either the hot spot or Trp-rich region are replaced. These findings suggest that the binding energy may be more widely distributed in the RNase A complex than in the Ang complex.     

Structures of glycopeptide antibiotics with peptides that model bacterial cell-wall precursors

The vancomycin-related antibiotics balhimycin and degluco-balhimycin have been crystallized in complexes with di-, tri- and pentapeptides that emulate bacterial cell-wall precursors, and four structures determined at atomic resolution (<1 A). In addition to the features expected from previous structural and spectroscopic studies, two new motifs were observed that may prove important in the design of antibiotics modified to overcome bacterial resistance. A changed binding mode was found in two dipeptide complexes, and a new type of face-to-face oligomerization (in addition to the well-established back-to-back dimerization) was seen when the model peptide reaches a critical fraction of the size of the cell-wall precursor pentapeptide. The extensive interactions involving both antibiotic and peptide molecules in this interface should appreciably enhance the kinetic and thermodynamic stability of the complexes. In the pentapeptide complex, the relative positions of the peptides are close to those required for d-Ala elimination, so this structure may provide a realistic model for the prevention of the enzyme-catalyzed cell-wall crosslinking by antibiotic binding.     

Specificity in protein-protein interactions: the structural basis for dual recognition in endonuclease colicin-immunity protein complexes

Bacteria producing endonuclease colicins are protected against their cytotoxic activity by virtue of a small immunity protein that binds with high affinity and specificity to inactivate the endonuclease. DNase binding by the immunity protein occurs through a "dual recognition" mechanism in which conserved residues from helix III act as the binding-site anchor, while variable residues from helix II define specificity. We now report the 1.7 A crystal structure of the 24.5 kDa complex formed between the endonuclease domain of colicin E9 and its cognate immunity protein Im9, which provides a molecular rationale for this mechanism. Conserved residues of Im9 form a binding-energy hotspot through a combination of backbone hydrogen bonds to the endonuclease, many via buried solvent molecules, and hydrophobic interactions at the core of the interface, while the specificity-determining residues interact with corresponding specificity side-chains on the enzyme. Comparison between the present structure and that reported recently for the colicin E7 endonuclease domain in complex with Im7 highlights how specificity is achieved by very different interactions in the two complexes, predominantly hydrophobic in nature in the E9-Im9 complex but charged in the E7-Im7 complex. A key feature of both complexes is the contact between a conserved tyrosine residue from the immunity proteins (Im9 Tyr54) with a specificity residue on the endonuclease directing it toward the specificity sites of the immunity protein. Remarkably, this tyrosine residue and its neighbour (Im9 Tyr55) are the pivots of a 19 degrees rigid-body rotation that relates the positions of Im7 and Im9 in the two complexes. This rotation does not affect conserved immunity protein interactions with the endonuclease but results in different regions of the specificity helix being presented to the enzyme.     

Comparison of protein-protein interactions in serine protease-inhibitor and antibody-antigen complexes: implications for the protein docking problem

The protein-protein interaction energy of 12 nonhomologous serine protease-inhibitor and 15 antibody-antigen complexes is calculated using a molecular mechanics formalism and dissected in terms of the main-chain vs. side-chain contribution, nonrotameric side-chain contributions, and amino acid residue type involvement in the interface interaction. There are major differences in the interactions of the two types of protein-protein complex. Protease-inhibitor complexes interact predominantly through a main-chain-main-chain mechanism while antibody-antigen complexes interact predominantly through a side-chain-side-chain or a side-chain-main-chain mechanism. However, there is no simple correlation between the main-chain-main-chain interaction energy and the percentage of main-chain surface area buried on binding. The interaction energy is equally effected by the presence of nonrotameric side-chain conformations, which constitute approximately 20% of the interaction energy. The ability to reproduce the interface interaction energy of the crystal structure if original side-chain conformations are removed from the calculation is much greater in the protease-inhibitor complexes than the antibody-antigen complexes. The success of a rotameric model for protein-protein docking appears dependent on the extent of the main-chain-main-chain contribution to binding. Analysis of (1) residue type and (2) residue pair interactions at the interface show that antibody-antigen interactions are very restricted with over 70% of the antibody energy attributable to just six residue types (Tyr > Asp > Asn > Ser > Glu > Trp) in agreement with previous studies on residue propensity. However, it is found here that 50% of the antigen energy is attributable to just four residue types (Arg = Lys > Asn > Asp). On average just 12 residue pair interactions (6%) contribute over 40% of the favorable interaction energy in the antibody-antigen complexes, with charge-charge and charge/polar-tyrosine interactions being prominent. In contrast protease inhibitors use a diverse set of residue types and residue pair interactions.     

Efficient comprehensive scoring of docked protein complexes using probabilistic support vector machines

Biological systems and processes rely on a complex network of molecular interactions. While the association of biological macromolecules is a fundamental biochemical phenomenon crucial for the understanding of complex living systems, protein-protein docking methods aim for the computational prediction of protein complexes from individual subunits. Docking algorithms generally produce large numbers of putative protein complexes with only few of these conformations resembling the native complex structure within an acceptable degree of structural similarity. A major challenge in the field of docking is to extract near-native structure(s) out of the large pool of solutions, the so called scoring or ranking problem. A series of structural, chemical, biological and physical properties are used in this work to classify docked protein-protein complexes. These properties include specialized energy functions, evolutionary relationship, class specific residue interface propensities, gap volume, buried surface area, empiric pair potentials on residue and atom level as well as measures for the tightness of fit. Efficient comprehensive scoring functions have been developed using probabilistic Support Vector Machines in combination with this array of properties on the largest currently available protein-protein docking benchmark. The established classifiers are shown to be specific for certain types of protein-protein complexes and are able to detect near-native complex conformations from large sets of decoys with high sensitivity. Using classification probabilities the ranking of near-native structures was drastically improved, leading to a significant enrichment of near-native complex conformations within the top ranks. It could be shown that the developed schemes outperform five other previously published scoring functions.     

Intraspecies regulation of ribonucleolytic activity

The evolutionary rate of proteins involved in obligate protein-protein interactions is slower and the degree of coevolution higher than that for nonobligate protein-protein interactions. The coevolution of the proteins involved in certain nonobligate interactions is, however, essential to cell survival. To gain insight into the coevolution of one such nonobligate protein pair, the cytosolic ribonuclease inhibitor (RI) proteins and secretory pancreatic-type ribonucleases from cow (Bos taurus) and human (Homo sapiens) were produced in Escherichia coli and purified, and their physicochemical properties were analyzed. The two intraspecies complexes were found to be extremely tight (bovine Kd = 0.69 fM; human Kd = 0.34 fM). Human RI binds to its cognate ribonuclease (RNase 1) with 100-fold greater affinity than to the bovine homologue (RNase A). In contrast, bovine RI binds to RNase 1 and RNase A with nearly equal affinity. This broader specificity is consistent with there being more pancreatic-type ribonucleases in cows (20) than humans (13). Human RI (32 cysteine residues) also has 4-fold less resistance to oxidation by hydrogen peroxide than does bovine RI (29 cysteine residues). This decreased oxidative stability of human RI, which is caused largely by Cys74, implies a larger role for human RI as an antioxidant. The conformational and oxidative stabilities of both RIs increase upon complex formation with ribonucleases. Thus, RI has evolved to maintain its inhibition of invading ribonucleases, even when confronted with extreme environmental stress. That role appears to take precedence over its role in mediating oxidative damage.     

Assessment of blind predictions of protein-protein interactions: current status of docking methods

The current status of docking procedures for predicting protein-protein interactions starting from their three-dimensional structure is assessed from a first major evaluation of blind predictions. This evaluation was performed as part of a communitywide experiment on Critical Assessment of PRedicted Interactions (CAPRI). Seven newly determined structures of protein-protein complexes were available as targets for this experiment. These were the complexes between a kinase and its protein substrate, between a T-cell receptor beta-chain and a superantigen, and five antigen-antibody complexes. For each target, the predictors were given the experimental structures of the free components, or of one free and one bound component in a random orientation. The structure of the complex was revealed only at the time of the evaluation. A total of 465 predictions submitted by 19 groups were evaluated. These groups used a wide range of algorithms and scoring functions, some of which were completely novel. The quality of the predicted interactions was evaluated by comparing residue-residue contacts and interface residues to those in the X-ray structures and by analyzing the fit of the ligand molecules (the smaller of the two proteins in the complex) or of interface residues only, in the predicted versus target complexes. A total of 14 groups produced predictions, ranking from acceptable to highly accurate for five of the seven targets. The use of available biochemical and biological information, and in one instance structural information, played a key role in achieving this result. It was essential for identifying the native binding modes for the five correctly predicted targets, including the kinase-substrate complex where the enzyme changes conformation on association. But it was also the cause for missing the correct solution for the two remaining unpredicted targets, which involve unexpected antigen-antibody binding modes. Overall, this analysis reveals genuine progress in docking procedures but also illustrates the remaining serious limitations and points out the need for better scoring functions and more effective ways for handling conformational flexibility.     

Analysis of the contribution of receptor subdomains to the cooperative binding and internalization of transforming growth factor-beta (TGF-beta) type I and type II receptors

The mechanistic basis underlying the striking cooperativity observed for the assembly of TGF-β family ligand/receptor complexes is not well understood. We report here an investigation in which we used a novel ligand sequestration assay, in combination with immunofluorescent light microscopy and flow cytometry analyses, to examine and quantify cooperative assembly of TGF-β ligand/receptor complexes on the cell surface, as well as ligand/receptor complex internalization. We analyzed the roles played by the ecto/transmembrane (ecto/TM) domains and endodomains of RI and RII TGF-β receptors in these processes by transfecting 293 or HeLa cells with different combinations of receptor mutants. We found that the ecto/TM domains of RII and RI cooperated together to promote the formation of cell surface receptor/ligand complexes. Furthermore, in agreement with the recently determined structure of the TGF-β3/RII ectodomain/RI ectodomain complex [J. Groppe, C.S. Hinck, P. Samavarchi-Tehrani, C. Zubieta, J.P. Schuermann, A.B. Taylor, P.M. Schwarz, J.L. Wrana, A.P. Hinck, Cooperative assembly of TGF-beta superfamily signaling complexes is mediated by two disparate mechanisms and distinct modes of receptor binding, Mol. Cell 29 (2008) 157–168], we observed that the N-terminus of the RII ectodomain was required for full assembly. With respect to endodomains, we found that the RI endodomain enhanced cooperative complex assembly at the cell surface, whereas both the RI and RII endodomains enhanced internalization. Finally, we observed that ligand/receptor internalization, but not complex assembly at the cell surface, was partly raft-dependent. In light of these results, currently proposed mechanisms of cooperative ligand/receptor assembly are discussed.     

Inhibition of human pancreatic ribonuclease by the human ribonuclease inhibitor protein

The ribonuclease inhibitor protein (RI) binds to members of the bovine pancreatic ribonuclease (RNase A) superfamily with an affinity in the femtomolar range. Here, we report on structural and energetic aspects of the interaction between human RI (hRI) and human pancreatic ribonuclease (RNase 1). The structure of the crystalline hRI x RNase 1 complex was determined at a resolution of 1.95 A, revealing the formation of 19 intermolecular hydrogen bonds involving 13 residues of RNase 1. In contrast, only nine such hydrogen bonds are apparent in the structure of the complex between porcine RI and RNase A. hRI, which is anionic, also appears to use its horseshoe-shaped structure to engender long-range Coulombic interactions with RNase 1, which is cationic. In accordance with the structural data, the hRI.RNase 1 complex was found to be extremely stable (t(1/2)=81 days; K(d)=2.9 x 10(-16) M). Site-directed mutagenesis experiments enabled the identification of two cationic residues in RNase 1, Arg39 and Arg91, that are especially important for both the formation and stability of the complex, and are thus termed "electrostatic targeting residues". Disturbing the electrostatic attraction between hRI and RNase 1 yielded a variant of RNase 1 that maintained ribonucleolytic activity and conformational stability but had a 2.8 x 10(3)-fold lower association rate for complex formation and 5.9 x 10(9)-fold lower affinity for hRI. This variant of RNase 1, which exhibits the largest decrease in RI affinity of any engineered ribonuclease, is also toxic to human erythroleukemia cells. Together, these results provide new insight into an unusual and important protein-protein interaction, and could expedite the development of human ribonucleases as chemotherapeutic agents.     

Disruption of shape-complementarity markers to create cytotoxic variants of ribonuclease A

Onconase (ONC), an amphibian member of the bovine pancreatic ribonuclease A (RNase A) superfamily, is in phase III clinical trials as a treatment for malignant mesothelioma. RNase A is a far more efficient catalyst of RNA cleavage than ONC but is not cytotoxic. The innate ability of ONC to evade the cytosolic ribonuclease inhibitor protein (RI) is likely to be a primary reason for its cytotoxicity. In contrast, the non-covalent interaction between RNase A and RI is one of the strongest known, with the RI.RNase A complex having a K(d) value in the femtomolar range. Here, we report on the use of the fast atomic density evaluation (FADE) algorithm to identify regions in the molecular interface of the RI.RNase A complex that exhibit a high degree of geometric complementarity. Guided by these "knobs" and "holes", we designed variants of RNase A that evade RI. The D38R/R39D/N67R/G88R substitution increased the K(d) value of the pRI.RNase A complex by 20 x 10(6)-fold (to 1.4 microM) with little change to catalytic activity or conformational stability. This and two related variants of RNase A were more toxic to human cancer cells than was ONC. Notably, these cytotoxic variants exerted their toxic activity on cancer cells selectively, and more selectively than did ONC. Substitutions that further diminish affinity for RI (which has a cytosolic concentration of 4 microM) are unlikely to produce a substantial increase in cytotoxic activity. These results demonstrate the utility of the FADE algorithm in the examination of protein-protein interfaces and represent a landmark towards the goal of developing chemotherapeutics based on mammalian ribonucleases.     

MgATP-Bound and nucleotide-free structures of a nitrogenase protein complex between the Leu 127 Delta-Fe-protein and the MoFe-protein

A mutant form of the nitrogenase iron protein with a deletion of residue Leu 127, located in the switch II region of the nucleotide binding site, forms a tight, inactive complex with the nitrogenase molybdenum iron (MoFe) protein in the absence of nucleotide. The structure of this complex generated with proteins from Azotobacter vinelandii (designated the L127Delta-Av2-Av1 complex) has been crystallographically determined in the absence of nucleotide at 2.2 A resolution and with bound MgATP (introduced by soaking) at 3.0 A resolution. As observed in the structure of the complex between the wild-type A. vinelandii nitrogenase proteins stabilized with ADP.AlF(4-), the most significant conformational changes in the L127Delta complex occur in the Fe-protein component. While the interactions at the interface between the MoFe-protein and Fe-proteins are conserved in the two complexes, significant differences are evident at the subunit-subunit interface of the dimeric Fe-proteins, with the L127Delta-Av2 structure having a more open conformation than the wild-type Av2 in the complex stabilized by ADP.AlF(4-). Addition of MgATP to the L127Delta-Av2-Av1 complex results in a further increase in the separation between Fe-protein subunits so that the structure more closely resembles that of the wild-type, nucleotide-free, uncomplexed Fe-protein, rather than the Fe-protein conformation in the ADP.AlF(4-) complex. The L127Delta mutation precludes key interactions between the Fe-protein and nucleotide, especially, but not exclusively, in the region corresponding to the switch II region of G-proteins, where the deletion constrains Gly 128 and Asp 129 from forming hydrogen bonds to the gamma-phosphate and activating water for attack on this group, respectively. These alterations account for the inability of this mutant to support mechanistically productive ATP hydrolysis. The ability of the L127Delta-Av2-Av1 complex to bind MgATP demonstrates that dissociation of the nitrogenase complex is not required for nucleotide binding.     

Three-dimensional structures of the free and antigen-bound Fab from monoclonal antilysozyme antibody HyHEL-63(,)

Antigen-antibody complexes provide useful models for studying the structure and energetics of protein-protein interactions. We report the cloning, bacterial expression, and crystallization of the antigen-binding fragment (Fab) of the anti-hen egg white lysozyme (HEL) antibody HyHEL-63 in both free and antigen-bound forms. The three-dimensional structure of Fab HyHEL-63 complexed with HEL was determined to 2.0 A resolution, while the structure of the unbound antibody was determined in two crystal forms, to 1.8 and 2.1 A resolution. In the complex, 19 HyHEL-63 residues from all six complementarity-determining regions (CDRs) of the antibody contact 21 HEL residues from three discontinuous polypeptide segments of the antigen. The interface also includes 11 bound water molecules, 3 of which are completely buried in the complex. Comparison of the structures of free and bound Fab HyHEL-63 reveals that several of the ordered water molecules in the free antibody-combining site are retained and that additional waters are added upon complex formation. The interface waters serve to increase shape and chemical complementarity by filling cavities between the interacting surfaces and by contributing to the hydrogen bonding network linking the antigen and antibody. Complementarity is further enhanced by small (<3 A) movements in the polypeptide backbones of certain antibody CDR loops, by rearrangements of side chains in the interface, and by a slight shift in the relative orientation of the V(L) and V(H) domains. The combining site residues of complexed Fab HyHEL-63 exhibit reduced temperature factors compared with those of the free Fab, suggesting a loss in conformational entropy upon binding. To probe the relative contribution of individual antigen residues to complex stabilization, single alanine substitutions were introduced in the epitope of HEL recognized by HyHEL-63, and their effects on antibody affinity were measured using surface plasmon resonance. In agreement with the crystal structure, HEL residues at the center of the interface that are buried in the complex contribute most to the binding energetics (DeltaG(mutant) - DeltaG(wild type) > 3.0 kcal/mol), whereas the apparent contributions of solvent-accessible residues at the periphery are much less pronounced (<1.5 kcal/mol). In the latter case, the mutations may be partially compensated by local rearrangements in solvent structure that help preserve shape complementarity and the interface hydrogen bonding network.