Twisting and bending of biological beams: distribution of biological beams in a stiffness mechanospace

Most biological beams bend and twist relatively easily compared to human-made structures. This paper investigates flexibility in 57 diverse biological beams in an effort to identify common patterns in the relationship between flexural stiffness and torsional stiffness. The patterns are investigated by mapping both ideal and biological beams into a mechanospace defined by flexural and torsional stiffness. The distribution of biological beams is not random, but is generally limited to particular regions of the mechanospace. Biological beams that are stiff in bending are stiff in torsion, while those that bend easily also twist easily. Unoccupied regions of the mechanospace represent rare combinations of mechanical properties, without proving that they are impossible. The mechanical properties of biological beams closely resemble theoretical expectations for ideal beams. Both distributions are potentially being driven by the interdependence of the material and structural properties determining stiffness. The mechanospace can be used as a broadly comparative tool to highlight systems that fall outside the general pattern observed in this study. These outlying beams may be of particular interest to both biologists and engineers due to either material or structural innovations.     

Comparative Planning of Flattening-Filter-Free and Flat Beam IMRT for Hypopharynx Cancer as a Function of Beam and Segment Number

Although highly conformal dose distributions can be achieved by IMRT planning, this often requires a large number of segments or beams, resulting in increased treatment times. While flattening-filter-free beams offer a higher dose rate, even more segments may be required to create homogeneous target coverage. Therefore, it is worthwhile to systematically investigate the dependence of plan quality on gantry angles and number of segments for flat vs. FFF beams in IMRT planning. For the practical example of hypopharynx cancer, we present a planning study of flat vs. FFF beams using three different configurations of gantry angles and different segment numbers. The two beams are very similar in physical properties, and are hence well-suited for comparative planning. Starting with a set of plans of equal quality for flat and FFF beams, we assess how far the number of segments can be reduced before the plan quality is markedly compromised, and compare monitor units and treatment times for the resulting plans. As long as a sufficiently large number of segments is permitted, all planning scenarios give good results, independently of gantry angles and flat or FFF beams. For smaller numbers of segments, plan quality decreases both for flat and FFF energies; this effect is stronger for fewer gantry angles and for FFF beams. For low segment numbers, FFF plans are generally worse than the corresponding flat beam plans, but they are less sensitive to a decrease in segment number if many gantry angles are used (18 beams); in this case the quality of flat and FFF plans remains comparable even for few segments.     

Spatial and temporal characteristics of electron and ion beams generated by high-voltage nanosecond discharges in dense molecular gases

Observations of ordered-structure electron beams generated by high-voltage nanosecond discharges in relatively dense (0.04–1 torr) molecular gases at high overvoltages are reported. The beams of accelerated ions generated by high-voltage nanosecond discharges are found to exhibit the same ordered structure. The observed structure of ion beams casts doubt on the mechanisms for the formation of a striped electron-beam structure that assume a regular ecton distribution. Parameters characterizing the temporal behavior of the accelerated electron and ion beams are measured.     

Biological effects of ion beams in Nicotiana tabacum L.

The biological effects of ion beams on Nicotiana tabacum L., particularly the induction of chromosome aberrations, were investigated. Dry seeds were exposed to ¹²C⁵⁺, ⁴He²⁺ and ¹H⁺ beams with linear energy transfer (LET) ranging from 1 to 111 keV/μm and irradiated with gamma-rays. Ion beams were more effective in reducing germination and survival of the seeds than gamma-rays. The LD₅₀ for ¹²C⁵⁺ beams, ⁴He²⁺ beams and gamma-rays were 35, 60 and 500 Gy, respectively. The frequencies of mitotic cells with chromosome aberrations, such as chromosome bridges, acentric fragments and lagging chromosomes in the root tip cells of the exposed seeds, increased linearly with increasing doses. Relative biological effectiveness (RBE) values, based on the doses that induced a survival inhibition of 50% and a 10% frequency of aberrant cells, were 14.3–17.5 for the ¹²C⁵⁺ beams, 7.0–8.3 for the ⁴He²⁺ beams and 7.8 for the ¹H⁺ beams. Furthermore, the relative ratios of the chromosome aberration types were significantly different between the ion beam and the gamma-ray regimes: chromosome fragments were more frequent in the former, and chromosome bridges in the latter. Based on these results, we concluded that the repair process of initial lesions induced by ion beams may be different from that induced by low- LET radiation. Received: 29 October 1998 / Accepted in revised form: 25 March 1999     

Refinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams

Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) deep beams. This study aims to refine STM through the strut effectiveness factor and increase result accuracy. Six RC deep beams with different shear span to effective-depth ratios (a/d) of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00 were experimentally tested under a four-point bending set-up. The ultimate shear strength of deep beams obtained from non-linear finite element modeling and STM recommended by ACI 318-11 as well as AASHTO LRFD (2012) were compared with the experimental results. An empirical equation was proposed to modify the principal tensile strain value in the bottle-shaped strut of deep beams. The equation of the strut effectiveness factor from AASHTTO LRFD was then modified through the aforementioned empirical equation. An investigation on the failure mode and crack propagation in RC deep beams subjected to load was also conducted.     

Flattening Filter-Free Beams in Intensity-Modulated Radiotherapy and Volumetric Modulated Arc Therapy for Sinonasal Cancer

Purpose

To evaluate the dosimetric impacts of flattening filter-free (FFF) beams in intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) for sinonasal cancer.

Methods

For fourteen cases, IMRT and VMAT planning was performed using 6-MV photon beams with both conventional flattened and FFF modes. The four types of plans were compared in terms of target dose homogeneity and conformity, organ-at-risk (OAR) sparing, number of monitor units (MUs) per fraction, treatment time and pure beam-on time.

Results

FFF beams led to comparable target dose homogeneity, conformity, increased number of MUs and lower doses to the spinal cord, brainstem and normal tissue, compared with flattened beams in both IMRT and VMAT. FFF beams in IMRT resulted in improvements by up to 5.4% for sparing of the contralateral optic structures, with shortened treatment time by 9.5%. However, FFF beams provided comparable overall OAR sparing and treatment time in VMAT. With FFF mode, VMAT yielded inferior homogeneity and superior conformity compared with IMRT, with comparable overall OAR sparing and significantly shorter treatment time.

Conclusions

Using FFF beams in IMRT and VMAT is feasible for the treatment of sinonasal cancer. Our results suggest that the delivery mode of FFF beams may play an encouraging role with better sparing of contralateral optic OARs and treatment efficiency in IMRT, but yield comparable results in VMAT.     

Terminal maturation of megakaryocytes and platelet production by hematopoietic stem cells irradiated with heavy-ion beams

Hematopoietic processes, especially megakaryocytopoiesis and thrombopoiesis, are highly sensitive to high-linear energy transfer (LET) radiations such as heavy-ion beams that have greater biological effects than low-LET radiation. This study examined the terminal maturation of megakaryocytes and platelet production derived from hematopoietic stem cells irradiated with heavy-ion beams. CD34(+) cells derived from human placental/umbilical cord blood were exposed to monoenergetic carbon-ion beams (LET = 50 keV/μm) and then cultured in a serum-free medium supplemented with thrombopoietin and interleukin-3. There was no significant difference in megakaryocyte-specific markers between nonirradiated control and irradiated cells. Expression of Tie-2, a receptor that acts in early hematopoiesis, showed a significant 1.31-fold increase after 2 Gy irradiation compared to control cells on day 7. There was a significant increase in Tie-2 mRNA expression. In addition, the expression of other mRNAs, such as PECAM1, SELP and CD44, was also significantly increased in cells irradiated with heavy-ion beams. However, the adherent function of platelets derived from the irradiated cells showed no difference from that in the controls. These results clarify that the functions of megakaryocytopoiesis and thrombopoiesis derived from hematopoietic stem/progenitor cells irradiated with heavy-ion beams are similar to those in the unirradiated cells, although heavy-ion beams affect the expression of genes associated with cellular adhesion.     

Basic phenomena of “macroscopic fluctuations” are repeated on light beams generated by lasers or light-emitting diodes

Basic phenomena of the “macroscopic fluctuations” are repeated on the light beams generated by lasers or light-emitting diodes. Study of the light beams fluctuations look promissory.     

Multiple-Beam Surface Plasmon Holographic Nanolithography

Multiple-beam surface plasmon holographic nanolithography based on a hemispherical prism coupling configuration is numerically studied in this paper. The proposed configuration is systematically analyzed and optimized for the purpose of achieving five different two-dimensional Bravais lattices by means of adjusting the spatial distribution of three incident beams properly. Furthermore, it is shown that the variation in the relative phase between incident beams can give rise to rich periodic patterns when overlapping more than three beams for surface plasmon holographic nanolithography.     

Evaluation of the resistance of Euglena gracilis to ion beam radiation

The resistance of Euglena (E.) gracilis to ionizing radiation was investigated using seven kinds of ion beams each with different energy characteristics. The minimum effective dose of the most lethal ion beams was 40 Gy. Given its substantially high resistance to heavy ion beams, E. gracilis possesses great potential in acting as an effective support system to produce food and regenerate oxygen in a space station. The lethal effect of ionizing radiation was dependent on the linear energy transfer value of the heavy ion beams, and reached a maximum at 196 keV/micron. This value was different from those obtained by previous irradiation experiments using mammalian and plant cells, suggesting that the radiation response of E. gracilis is distinct from that of mammalian and plant cells.     

Scalar equation for wave beams in a magnetized plasma

A heuristic procedure is proposed for deriving quasi-optical equations for wave beams in anisotropic gyrotropic media with allowance for aberrations, spatial dispersion, and absorption. To solve such equations numerically, a method is developed that generalizes the operator exponent method. The applicability limits of the aberration-free approximation for simulating the propagation of beams in absorbing media are determined. Numerical examples of the propagation of beams in the vicinity of the electron cyclotron resonance in plasmas in actual devices are presented.     

The effect of beam shape on physical parameters of head and neck simultaneous-integrated boost intensity-modulated radiation therapy

Aim

To evaluate the influence of the beam shape created by X-rays with “flat beams” and without “flattening-filter-free [FFF] beams” a flattening filter, and the isocenter locations for FFF beams on the treatment of a large irradiated volume for tumours.

Focusing of heavy ion beams by a high-current plasma lens

Results are presented from studies of the focusing of wide-aperture low-energy (100–400 eV) and moderate-energy (5–25 keV) beams of heavy-metal ions by a high-current electrostatic plasma lens. It is found experimentally that, because of the significant electron losses, the efficient focusing of such beams can be achieved only if the external potentials at the plasma-lens electrodes are maintained constant. Static and dynamic characteristics of the lens are studied under these conditions. It is shown that, as the beam current and the electrode voltage increase, the maximum electrostatic field in the lens tends to a certain limiting value because of the increase in the spatial potential near the lens axis. The role of spherical and moment aberrations in the focusing of wide-aperture low-divergence ion beams is revealed. It is shown that, even when spherical aberrations are minimized, unremovable moment aberrations decrease the maximum compression ratio of a low-energy heavy-ion beam because of the charge separation of multiply charged ions in the focal region. At the same time, as the ion energy increases, the role of the moment aberrations decreases and the focusing of high-current heavy-ion beams by a plasma lens becomes more efficient than the focusing of light-ion (hydrogen) beams. This opens up the possibility of using electrostatic plasma lenses to control ion beams in high-dose ion implanters and high-current accelerators of heavy ions.     

碳离子束辐照拟南芥介导外源基因转移的研究

采用700keV或4.0MeV碳离子束辐照拟南芥种子,通过对样品的显微摄影,发现随着辐照剂量的增加,碳离子束对种子表面的损伤逐渐加剧,特别是在4.0MeV碳离子束辐照下,当剂量达到1×1014ions·cm-2后,种皮局部逐渐被刻蚀殆尽,甚至造成种皮局部破裂。对拟南芥种子进行台盼蓝染色后的显微观测显示,碳离子束辐照可以导致拟南芥种皮细胞着染,在剂量较大的情况下,部分皮下细胞也可着染,表明碳离子束可作用到皮下细胞,为外源基因提供导入的通道。GUS基因导入后的组织化学检测表明:质粒pCAMBIA1301能够进入4.0MeV碳离子束辐照后的拟南芥种子,并在种子和幼芽中获得瞬间表达。     

Flexural and torsional stiffness in multi-jointed biological beams

Flexibility, the ability to deform in response to loads, is a common property of biological beams. This paper investigates the mechanical behavior of multi-jointed beams, which are characterized by a linear series of morphologically similar joints. Flexural stiffness and torsional stiffness were measured in two structurally distinct beams, crinoid arms (Echinodermata, Comatulida) and crustacean antennae (Arthropoda, Decapoda). Morphological data from these beams were used to determine the relative contributions of beam diameter and joint density (number of joints per millimeter of beam length) to the flexural and torsional stiffness of these two structures. As predicted by beam theory, beam diameter influenced stiffness in both crinoid arms and crustacean antennae. In crinoid arms, increases in joint density were associated with decreases in stiffness, but joint density had no significant influence on stiffness in crustacean antennae. In both crinoid arms and crustacean antennae, the magnitudes of flexural and torsional stiffness, as well as the ratio of these two variables, were similar to previously reported values for non-jointed biological beams. These results suggest that the structural design of a biological beam is not a limiting factor determining its mechanical properties.     

Polarization‐multiplexed,dual‐beam swept source optical coherence tomography angiography

A polarization‐multiplexed, dual‐beam setup is proposed to expand the field of view (FOV) for a swept source optical coherence tomography angiography (OCTA) system. This method used a Wollaston prism to split sample path light into 2 orthogonal‐polarized beams. This allowed 2 beams to shine on the cornea at an angle separation of ~14°, which led to a separation of ~4.2 mm on the retina. A 3‐mm glass plate was inserted into one of the beam paths to set a constant path length difference between the 2 polarized beams so the interferogram from the 2 beams are coded at different frequency bands. The resulting OCTA images from the 2 beams were coded with a depth separation of ~2 mm. A total of 5 × 5 mm² angiograms from the 2 beams were obtained simultaneously in 4 seconds. The 2 angiograms then were montaged to get a wider FOV of ~5 × 9.2 mm².      

Molecular characterization of microbial mutations induced by ion beam irradiation

A positive selection system for gene disruption using a sucrose-sensitive transgenic rhizobium was established and used for the molecular characterization of mutations induced by ion beam irradiations. Single nucleotide substitutions, insertions, and deletions were found to occur in the sucrose sensitivity gene, sacB, when the reporter line was irradiated with highly accelerated carbon and iron ion beams. In all of the insertion lines, fragments of essentially the same sequence and of approximately 1188bp in size were identified in the sacB regions. In the deletion lines, iron ions showed a tendency to induce larger deletions than carbon ions, suggesting that higher LET beams cause larger deletions. We found also that ion beams, particularly "heavier" ion beams, can produce single gene disruptions and may present an effective alternative to transgenic approaches.     

Dual‐color STED super‐resolution microscope using a single laser source

STED (stimulated emission depletion) microscopy is one of the most promising super‐resolution fluorescence microscopies，due to its fast imaging and ultra‐high resolution. In this paper, we present a dual‐color STED microscope with a single laser source. Polarization beam splitters are used to separate the output from a supercontinuum laser source into four laser beams, including two excitation beams (488, 635 nm) and two depletion beams (592, 775 nm). These four laser beams are then used to build a low cost dual‐color STED system to achieve a spatial resolution of 75 nm in cell samples.     

Severe damage of human megakaryocytopoiesis and thrombopoiesis by heavy-ion beam radiation

Heavy ions have a unique efficacy for tumor control in radiotherapy. To clarify the effects of heavy-ion beams on hematopoietic stem/progenitor cells, the effects of carbon-ion beams on megakaryocytopoiesis and thrombopoiesis in CD34(+) cells derived from human placental and umbilical cord blood were investigated. The cells were exposed to carbon-ion beams (LET = 50 keV/microm) and then were treated with thrombopoietin (TPO) alone or TPO plus other cytokines. Megakaryocytic progenitor cells, such as megakaryocyte colony-forming units (CFU-Meg), were far more sensitive to carbon-ion beams than to X rays, and no restoration of carbon-ion beam-irradiated CFU-Meg by treatment with any cytokine combination was observed. However, total cell expansion in liquid culture was not different after either carbon-ion beam or X irradiation of CD34(+) cells. The activation of gamma-H2AX, a marker of DNA double strand-breaks (DSBs), was promoted by the cytokine treatment in X-irradiated CD34(+) cells but not in carbon-ion-irradiated cells. These results showed that carbon-ion beams inflicted severe damage on megakaryocytopoiesis and thrombopoiesis and that a better combination of cytokines and other agents may be needed to stimulate the recovery of hematopoietic cells and repair this damage.     

Ion beam radiobiology and cancer: Time to update ourselves

High-energy protons and carbon ions exhibit an inverse dose profile allowing for increased energy deposition with penetration depth. Additionally, heavier ions like carbon beams have the advantage of a markedly increased biological effectiveness characterized by enhanced ionization density in the individual tracks of the heavy particles, where DNA damage becomes clustered and therefore more difficult to repair, but is restricted to the end of their range. These superior biophysical and biological profiles of particle beams over conventional radiotherapy permit more precise dose localization and make them highly attractive for treating anatomically complex and radioresistant malignant tumors but without increasing the severe side effects in the normal tissue. More than half a century since Wilson proposed their use in cancer therapy, the effects of particle beams have been extensively investigated and the biological complexity of particle beam irradiation begins to unfold itself. The goal of this review is to provide an as comprehensive and up-to-date summary as possible of the different radiobiological aspects of particle beams for effective application in cancer treatment.