Outer membrane protein a and other polypeptides regulate capsular polysaccharide synthesis in E. coli K-12.

Summary capR (lon) mutants of Escherichia coli K-12 are mucoid on minimal agar because they produce large quantities of capsular polysaccharide. When such mutants are transformed to tetracycline resistance by plasmid pMC44, a hybrid plasmid that contains a 2 megadalton (Mdal) endonuclease EcoR1 fragment of E. coli K-12 DNA joined to the cloning vehicle-pSC101, capsular polysaccharide synthesis is inhibited and the transformed colonies exhibit a nonmucoid phenotype. Re-cloning of the 2 Mdal EcoR1 fragment onto plasmid pHA105, a min-colE1 plasmid, yielded plasmid pFM100 which also inhibited capsular polysaccharide synthesis in the capR mutants. A comparison of the polypeptides specified by both plasmids pFM100 and pMC44 in minicells demonstrated that seven polypeptide bands were specified by the 2 Mdal DNA, one of which was previously demonstrated to be outer membrane protein a; also known as 3b or M2 (40 kilodaltons, Kdal). Plasmid mutants no longer repressing capsular polysaccharide synthesis were either unable to specify the 40 K dal outer membrane protein a or were deficient in synthesis of 25 K dal and 14.5 K dal polypeptides specified by the 2 Mdal DNA fragment. Studies with a minicell-producing strain that also contained a capR mutation indicated that the capR gene product regulated processing of at least one normal protein, the precursor of outer membrane protein a.     

Protein expression in E. coli minicells by recombinant plasmids.

The polypeptides synthesized in E. coli minicells from recombinant plasmids containing DNA fragments from cauliflower mosaic virus, Drosophila melanogaster, and mouse mitochondria were examined. Molecularly cloned fragments of cauliflower mosaic virus DNA directed the synthesis of high levels of three polypeptides, which were synthesized entirely from within the cloned virus DNA fragments independent of their insertion into the plasmid vehicles. Several fragments of D. melanogaster DNA were capable of initiating polypeptide synthesis; however, termination of these polypeptides was dependent upon the insertion into the plasmid vehicle. The majority of D. melanogaster DNA fragments examined did not direct the detectable synthesis of any polypeptides. Insertion of DNA into the Eco RI site of ColE1 and pSC101 plasmids resulted in the altered expression of plasmid-encoded polypeptides. In the case of ColE1, this site of insertion lies within the colicin E1 structural gene, and insertion of foreign DNA into the site results in the synthesis of an inactive truncated colicin E1 molecule. It is probable that the Eco RI site in pSC101 lies within the structural gene for a polypeptide involved in tetracycline resistance, and insertion of DNA into this site may also result in the synthesis of a truncated or elongated polypeptide.     

Cloning and expression of the pneumococcal neuraminidase gene in Escherichia coli

A gene bank of Sau3AI-generated Streptococcus pneumoniae DNA fragments was constructed in Escherichia coli K-12 by cloning into the BamHI site of the cosmid vector pHC79. One clone capable of cleaving the fluorogenic neuraminidase substrate 2'-(4-methylumbelliferyl)-alpha-D-N-acetyl-neuraminic acid was isolated. This activity was inhibited by treatment with a mouse antiserum raised against purified pneumococcal neuraminidase. The recombinant plasmid purified from this clone (designated pJCP301) contained approximately 3.0 kb of pneumococcal DNA. Western-blot analysis indicated that E. coli K-12[pJCP301] produced a 98-kDa polypeptide which reacted with antineuraminidase serum.     

Identification by deletion analysis of an inducible protein required for plasmid pSC101-mediated tetracycline resistance.

Plasmids containing small deletions within a tetracycline (Tc) resistance gene(s) of plasmid pHA121 were isolated. Plasmid pHA121 was formed by ligating the EcoRI-digested Tc resistance plasmid pSC101 and similarly digested mini-ColE1 plasmid pHA105. The DNA deletion plasmids were constructed by digesting plasmid pHA121 DNA with the restriction endonucleases BamH1 and Sal1 and, in addition, λ exonuclease. Two plasmids, designated pJT131 and pJT133, had small deletions of approximately 0.64 to 0.8 kb and a comparison of the radioactive polypeptides synthesized in plasmid-containing minicells revealed that a 34-kdal polypeptide was not specified by either pJT131 or pJT133. We conclude that the 34-kdal polypeptide is required for the expression of Tc resistance and that its structural gene probably maps in the deleted region of pSC101 DNA.     

Construction of a novel suicide vector: selection for Escherichia coli HB101 recombinants carrying the DNA insert.

We constructed a new type of cloning vector, pERISH2, that transforms Escherichia coli HB101 only when a foreign DNA fragment is ligated into the cloning site of the plasmid vector. Plasmid pERISH2 carries the rcsB gene which is derived from the chromosome of E. coli HB101 and is involved in the regulation of colanic acid production. When E. coli HB101 is transformed by this vector carrying the intact rcsB gene, the gene product RcsB blocks bacterial growth. However, if the rcsB gene is inactivated by the insertion of a foreign DNA fragment, this recombinant plasmid no longer inhibits the growth of E. coli HB101. Although E. coli HB101 is not stably transformed by pERISH2, E. coli K-12 strains such as JM109 and C600 can harbor this vector. Therefore, pERISH2 can be amplified in JM109 and be prepared from this strain in a large quantity using conventional methods. A chromosomal gene library of Klebsiella pneumoniae is constructed easily and efficiently by the utilization of this new cloning vector.     

Thermoregulated expression of a cloned congo red binding activity gene of Shigella flexneri

Abstract A 2.15-kb Pst I fragment of the 140-megadalton (MDa) plasmid of Shigella flexneri which encodes Congo red (CR) dye binding activity was isolated by recombinant techniques. The recombinant plasmid was shown to encode the structural gene for CR binding but failed to restore the ability of noninvasive strains to penetrate HeLa cell monolayers. A partial restriction map was constructed and polypeptides specified by the 140-MDa insert DNA identified in a minicell system. The putative polypeptide responsible for CR binding activity was identified by its thermoregulated expression in minicells. The M _r of the putative CR binding protein was 24000.     

Outer Membrane Proteins of Escherichia coli IV. Differences in Outer Membrane Proteins Due To Strain and Cultural Differences

When the 42,000-dalton major outer membrane protein of Escherichia coli O111 is examined on alkaline polyacrylamide gels containing sodium dodecyl sulfate, it is resolved into three distinct bands designated as proteins 1, 2, and 3. Band 3 consists of two distinct polypeptides, proteins 3a and 3b. E. coli K-12 does not make any protein 2, but makes proteins similar to 1, 3a, and 3b as indicated by comparison of cyanogen bromide peptide patterns. Several Shigella species and most other strains of E. coli resemble E. coli K-12 in that they lack protein 2, whereas Salmonella typhimurium is more similar to E. coli O111. In addition to these species and strain differences, cultural differences resulted in differences in the outer membrane protein profiles. Under conditions of catabolite repression, the level of protein 2 in E. coli O111 decreased while the level of protein 1 increased. An enterotoxin-producing strain similar to E. coli O111 produced no protein 1 and an elevated level of protein 2 under conditions of low catabolite repression. The levels of proteins 1 and 3 are also different in different phases of the growth curve, with protein 1 being the major species in the exponential-phase cells and protein 3 being the major species in stationary-phase cells. A multiply phage-resistant mutant of E. coli K-12 with no obvious cell wall defects produced no protein 1 or 2, but made increased amounts of protein 3. Thus, the major outer membrane proteins of E. coli and related species may vary considerably without affecting outer membrane integrity.     

Organization of K88ac-encoded polypeptides in the Escherichia coli cell envelope: use of minicells and outer membrane protein mutants for studying assembly of pili

Escherichia coli K-12 minicells, harboring recombinant plasmids encoding polypeptides involved in the expression of K88ac adhesion pili on the bacterial cell surface, were labeled with [35S]methionine and fractionated by a variety of techniques. A 70,000-dalton polypeptide, the product of the K88ac adhesion cistron adhA, was primarily located in the outer membrane of minicells, although it was less clearly associated with this membrane than the classical outer membrane proteins OmpA and matrix protein. Two polypeptides of molecular weights 26,000 and 17,000 (the products of adhB and adhC, respectively) were located in significant amounts in the periplasmic space. The 29,000-dalton polypeptide was shown to be processed in E. coli minicells. The 23.500-dalton K88ac pilus subunit (the product of adhD) was detected in both inner and outer membrane fractions. E. coli mutants defective in the synthesis of murein lipoprotein or the major outer membrane polypeptide OmpA were found to express normal amounts of K88ac antigen on the cell surface, whereas expression of the K88ac antigen was greatly reduced in perA mutants. The possible functions of the adh cistron products are discussed.     

Increased production of aspartase in Escherichia coli K-12 by use of stabilized aspA recombinant plasmid

Recombinant plasmid pYT471, which consists of the aspartase gene (aspA) and the multicopy vector pBR322, was lost from cells of Escherichia coli K-12 at high frequencies in medium in which aspartase was abundantly formed due to release from catabolite repression. This plasmid loss was not completely prevented by the selective pressure of antibiotic addition. To increase the stability of the aspA plasmid, pNK101 (pBR322::aspA-par) was constructed by using the partition locus (par) derived from the low-copy vector pSC101. In E. coli K-12 cells, pNK101 was lost at a frequency as low as 0.4% per cell generation in nonselective medium, whereas pYT471 was lost at a frequency as high as 8.5%. Cells harboring this stable plasmid produced ca. 30-fold more aspartase than did cells harboring the unstable plasmid after 30 cell generations. Thus, we could increase aspartase production by stabilizing the aspA recombinant plasmid.     

Increased production of aspartase in Escherichia coli K-12 by use of stabilized aspA recombinant plasmid.

Recombinant plasmid pYT471, which consists of the aspartase gene (aspA) and the multicopy vector pBR322, was lost from cells of Escherichia coli K-12 at high frequencies in medium in which aspartase was abundantly formed due to release from catabolite repression. This plasmid loss was not completely prevented by the selective pressure of antibiotic addition. To increase the stability of the aspA plasmid, pNK101 (pBR322::aspA-par) was constructed by using the partition locus (par) derived from the low-copy vector pSC101. In E. coli K-12 cells, pNK101 was lost at a frequency as low as 0.4% per cell generation in nonselective medium, whereas pYT471 was lost at a frequency as high as 8.5%. Cells harboring this stable plasmid produced ca. 30-fold more aspartase than did cells harboring the unstable plasmid after 30 cell generations. Thus, we could increase aspartase production by stabilizing the aspA recombinant plasmid.     

Binding between the par region of plasmids R1 and pSC101 and the outer membrane fraction of the host bacteria

The binding between par+ and par plasmid DNA to different membrane fractions of Escherichia coli was investigated. Membrane material from cells carrying different Par+ and Par- derivatives of plasmids R1 and pSC101 was isolated and fractionated into an outer and a cytoplasmic membrane fraction. The presence of plasmid DNA in the two membrane fractions was measured either by nick-translation of the membrane-bound DNA, followed by filter-hybridization to homologous DNA, or by filter-hybridization of the membrane-bound DNA to nick-translated homologous purified plasmid DNA. The DNA of par derivatives of plasmids R1 and pSC101 could be detected only in the cytoplasmic membrane fraction, whereas the corresponding par+ plasmid DNA also appeared in the outer membrane material, indicating a specific binding between the R1 and pSC101 partition loci and the bacterial outer membrane. The experiment was then modified by fractionation of the membrane material from cells carrying hybrids between the vector pSF2124 and the par region or the basic replicon region of plasmid R1. The DNA of the membrane fractions were filter-hybridized to nick-translated probes. Again, the par+ region caused hybridization to the outer membrane material. Therefore, we may conclude that controlled partitioning involves binding of DNA to membrane material that has the same density as the outer membrane of the host bacteria. This finding offers a biochemical 'assay' for studies of the molecular biology of plasmid partitioning.     

Novel one-step cloning vector with a transposable element: application to the Myxococcus xanthus genome.

A new strategy was developed for rapid cloning of genes with a transposon mutation library. We constructed a transposon designated TnV that was derived from Tn5 and consists of the gene coding for neomycin phosphotransferase II as well as the replication origin of an Escherichia coli plasmid, pSC101, flanked by Tn5 inverted repeats (IS50L and IS50R). TnV can transpose to many different sites of DNA in E. coli and Myxococcus xanthus and confers kanamycin resistance (Kmr) to the cells. From the Kmr cells, one-step cloning of a gene which is mutated as a result of TnV insertion can be achieved as follows. Chromosomal DNA isolated from TnV-mutagenized cells is digested with an appropriate restriction enzyme, ligated, and transformed into E. coli cells with selection for Kmr. The plasmids isolated contain TnV in the target gene. The plasmid DNA can then be used as a probe for characterization of the gene and screening of clones from a genomic library. We used this vector to clone DNA fragments containing genes involved in the development of M. xanthus.     

Strain and temperature-dependent variation in the amount of BtuB polypeptide in the Escherichia coli K-12 outer membrane

Abstract The outer membrane protein BtuB of Escherichia coli K-12 is the receptor for vitamin B₁₂; it is normally present in approx. 200 copies per cell. We describe here the conditions by which BtuB was readily observed in electropherograms of outer membrane preparations. These conditions are as follows. (1) Incorporation of 8 M urea in sodium dodecyl sulfate-polyacrylamide gel systems improved detection of the polypeptide. (2) In most E. coli K-12 strains examined, BtuB was most abundant when cells were grown at 27°C. This thermoregulation of BtuB was independent of envZ and envY , two regulatory genes for outer membrane proteins.     

On the nature of tetracycline resistance controlled by the plasmid pSC101.

In vitro enzymatic alteration of plasmid phenotype and in vitro construction of recombinant plasmids containing genetic information derived from the plasmid pSC101 have been used to investigate the mechanism of function of tetracycline resistance determined by the plasmid pSC101. The resistance has been shown to be inducible and involves the increased synthesis of membrane-associated polypeptides of 34,000, 26,000 and 14,000 daltons that are encoded for by the plasmid. The 34,000 dalton polypeptide along with another plasmid-encoded polypeptide of 18,000 daltons function in an ATP-independent manner to prevent the accumulation of tetracycline by the cell. These polypeptides are sufficient for resistance. A second component of plasmid-determined resistance involves the 14,000 dalton polypeptide and reduces the initial adsorption of tetracycline by sensitive cells, but is not alone sufficient for the generation of resistance. The role of the 26,000 dalton polypeptide in tetracycline resistance has not been identified.     

Molecular cloning of an Escherichia coli plasmid determinant than encodes for the production of heat-stable enterotoxin.

A conjugative plasmid, ESF0041 was isolated from an enterotoxigenic strain of Escherichia coli from calves. ESF0041 was found to be 65 x 10(6) daltons in mass of a member of the F incompatibility complex. Acquisition of ESF0041 by E. coli K-12 was invariably associated with the capacity to produce heat-stable (ST) enterotoxin. ESF0041 and pSC101 deoxyribonucleic acids were cleaved with EcoRI, and the fragments were ligated with polynucleotide ligase. Transformation of E. coli K-12 with the ligation mixture led to the isolation of an ST+ clone. Further analysis of the plasmid deoxyribonucleic acid from this clone showed that a structural gene(s) associated with ST biosynthesis had been isolated as a 5.7 x 10(6)-dalton ESF0041 fragment in pSC101. In turn, 5.7 x 10(6)-dalton fragment was ligated to a multicopy COLE1 derivative, RSF2124, so that toxin synthesis was amplified about threefold.     

Two outer membrane transport systems for vitamin B12 in Salmonella typhimurium.

The involvement of an outer membrane transport component for vitamin B12 uptake in Salmonella typhimurium, analogous to the btuB product in Escherichia coli, was investigated. Mutants of S. typhimurium selected for resistance to bacteriophage BF23 carried mutations at the btuB locus (butBS) (formerly called bfe, at the analogous map position as the E. coli homolog) and were defective in high-affinity vitamin B12 uptake. The cloned E. coli btuB gene (btuBE) hybridized to S. typhimurium genomic DNA and restored vitamin B12 transport activity to S. typhimurium btuBS mutants. An Mr-60,000 protein in the S. typhimurium outer membrane was repressed by growth with vitamin B12 and was eliminated in a btuBS mutant. The btuBS product thus appears to play the same role in vitamin B12 transport by S. typhimurium as does the E. coli btuBE product. A second vitamin B12 transport system that is not present in E. coli was found by cloning a fragment of S. typhimurium DNA that complemented btuB mutants for vitamin B12 utilization. In addition to this plasmid with a 6-kilobase insert of S. typhimurium DNA, vitamin B12 utilization by E. coli btuB strains required the btuC and btuD products, necessary for transport across the cytoplasmic membrane, but not the btuE or tonB product. The plasmid conferred low levels of vitamin B12-binding and energy-dependent transport activity but not susceptibility to phage BF23 or utilization of dicyanocobinamide. The cloned S. typhimurium DNA encoding this new transport system did not hybridize to the btuBE gene or to E. coli chromosomal DNA and therefore does not carry the S. typhimurium btuBS locus. Increased production of an Mr -84,000 polypeptide associated with the outer membrane was seen. The new locus appears to be carried on the large plasmid in most S. typhimurium strains. Thus S. typhimurium possesses both high- and low-affinity systems for uptake of cobalamins across the outer membrane.     

Cloning of gene lon (capR) of Escherichia coli K-12 and identification of polypeptides specified by the cloned deoxyribonucleic acid fragment

A mutation in the lon (capR) gene of Escherichia coli K-12 results in overproduction of capsular polysaccharide and increased sensitivity to ultraviolet and ionizing radiations. The lon (capR) gene deoxyribonucleic acid was cloned from a new F′ factor. The new plasmids, designated pBZ201 and pBZ203, (i) contained an additional 8.2-megadalton (Md) EcoRI fragment that had the same mobility as one of the EcoRI fragments of the F′, and (ii) conferred repression of capsular polysaccharide synthesis and repression of sensitivity to ultraviolet radiation in a bacterial transformation experiment with capR mutant recipient strains. A capR9 mutant plasmid, pBZ201M9, was also isolated and conferred expression of mucoidy and ultraviolet sensitivity to a capR⁺ (lon⁺) strain, indicating that the capR9 allele was dominant. Plasmids pBZ201M80, pBZ201M9-INSA, and pBZ201M9-INSB were characterized by transformation as containing recessive capR mutant alleles. Heteroduplex analyses and agarose gel electrophoresis of restriction endonuclease digests of plasmid DNA preparations revealed that (i) pBZ201M9-INSA and pBZ201M9-INSB each contains a 0.5-Md insertion (probably IS1) in the cloned DNA fragment at the same site, and (ii) pBZ201 and pBZ203, both capR⁺ plasmids, contain the same 8.2-Md fragment cloned in opposite orientations with respect to the cloning vehicle, pSC101. Plasmid-specified polypeptides were determined by using strain CSR603 maxicells containing each plasmid. Two new polypeptides were coded by the lon⁺ (capR⁺) 8.2-Md DNA fragment: Z1, 94 kilodaltons (94K), and Z2, 67K. The maxicells containing recessive capR mutant plasmids were deficient only in synthesis of the 94K polypeptide, and the dominant (capR9) mutant plasmid specified 5 to 10 times more of the 94K polypeptide than the maxicells containing the capR⁺ plasmid. Other data indicated that the capR9-specified “94K polypeptide” was not identical to the capR⁺-specified “94K polypeptide.” Thus the altered mutant polypeptide was synthesized in increased quantities, suggesting a defective mode of autogenous regulation for the capR9 polypeptide and effective autogenous regulation of the capR⁺ polypeptide.     

A pSC101-derived plasmid which shows no sequence homology to other commonly used cloning vectors

We have constructed a plasmid cloning vector, pGB2, which is derived from the Escherichia coli plasmid pSC101. The plasmid, which specifies resistance to spectinomycin and streptomycin, contains unique restriction sites for the enzymes HindIII, PstI, SalI, BamHI, SmaI and EcoRI. pGB2 shows no sequence homology, as detected by DNA-DNA hybridization, to several widely used vectors such as pBR322, pUC8 and phage lambda L47.1. Amongst other applications, DNA fragments can be cloned into the plasmid and then radioactive plasmid DNA can be used as a probe to screen recombinant DNA libraries.