Integrating life cycle assessment and material flow cost accounting to account for resource productivity and economic-environmental performance

Purpose

This study contributes to measuring the interactions between human technological activities and the natural environment in an integrative approach to support organisations and supply chain partners in their efforts to increase the resource productivity and economic-environmental performance of their product systems. We expand existing knowledge on the underlying methodological facets of the integrative use of two standardised instruments. We further guide the discussion with a case study and depict areas for future research.

Methods

We discuss the integration of life cycle assessment and material flow cost accounting to examine resource inputs and product and non-product outputs alongside environmental impacts and costs. Life cycle assessment is a non-financial instrument to identify hotspots of resource use and associated environmental burdens, while material flow cost accounting is a powerful financial instrument used to monetise resource use (in)efficiencies and demonstrate the resources bound in product and non-product output. Both are valuable life cycle management instruments to measure and control strategic themes related to improvement measures and investment decisions and support communication between the different decision-makers involved. We highlight the methodological facets of this integrative assessment based on a holistic single case study in order to share the lessons learned.

Results and discussion

Our case study illustrates a typical case where manufacturing costs and environmental burdens are primarily borne by the product, whereas a substantial portion of the resources also flows into by-products and non-products. We highlight the relevance of a shared set of rules and assumptions for systems, functions, system boundaries, inventories, and allocation rules which avoid an undesired interfusion of the physical and monetary dimensions to support a more systematic, consistent, and comparable modelling of integrated life cycle assessment and material flow cost accounting. However, researchers and practitioners should bear in mind the benefits and limitations of such integrated assessments, such as methodological choice, which also affect the decisive direction of the results.

Conclusions

The present study expands existing knowledge on the methodological facets of combining life cycle assessment and material flow cost accounting. By contrasting the hotspots of resource use as well as associated costs and environmental burdens, the instruments jointly provide valuable insights to identify integrated resource saving as well as economic and environmental improvement potentials for present and future business operations. Future research is needed in the following arenas: further development of the environmental impact indicators to capture the temporal and geographical occurrence of impacts; updating allocation criteria for integrated assessments in standards and guidelines; improving the visualisation of revenues in Sankey diagrams, the flow-based classification in the modelling software, as well as cost accounting and information systems; formalisation of indicators in management processes to generate resource efficiency strategies and goals; and finally, assessment of circular economy strategies and negative effects.

     

Extraction of natural products from bark of <Emphasis Type="Italic">Betula pendula</Emphasis> using ionic liquids

Introduction

Aqueous–methanol mixtures have successfully been applied to extract a broad range of metabolites from plant tissue. However, a certain amount of material remains insoluble.

Objectives

To enlarge the metabolic compendium, two ionic liquids were selected to extract the methanol insoluble part of trunk from Betula pendula.

Methods

The extracted compounds were analyzed by LC/MS and GC/MS.

Results

The results show that 1-butyl-3-methylimidazolium acetate (IL-Ac) predominantly resulted in fatty acids, whereas 1-ethyl-3-methylimidazolium tosylate (IL-Tos) mostly yielded phenolic structures. Interestingly, bark yielded more ionic liquid soluble metabolites compared to interior wood.

Conclusion

From this one can conclude that the application of ionic liquids may expand the metabolic snapshot.

     

Net primary production,nitrogen cycling,biomass allocation,and resource use efficiency along a topographical soil water and nitrogen gradient in a semi-arid forest near an arid boundary

Aims

The objective of this study was to investigate how plants maintain productivity under a limited supply of water and N along the topographical soil water and N gradients in semi-arid forests.

Methods

We investigated forest structure and productivity, N cycling, and water and N use by plants at three different slope positions in a forested area near an arid boundary on a loess plateau in China.

Results

Net primary production (NPP) and aboveground N uptake decreased as soil water and/or N availability decreased on upper slopes; however, NPP and aboveground N uptake were only slightly lower than those of more humid forest ecosystems. Water use efficiency (WUE), N use efficiency (NUE), and fine root biomass increased as soil water and/or N supply decreased with altitude. High NUE was linked to higher N mean residence time, caused by higher N resorption efficiency rather than increasing N productivity.

Conclusions

Our results suggest that NPP and N uptake can be maintained by increasing WUE and NUE and increasing fine root biomass in water and N co-limited semi-arid forest ecosystems near arid boundaries. Such changes in resource use and acquisition strategy can affect production and N cycling via plant-soil feedback systems.

     

Optimization of fecal sample preparation for untargeted LC-HRMS based metabolomics

Introduction

Collecting feces is easy. It offers direct outcome to endogenous and microbial metabolites.

Objectives

In a context of lack of consensus about fecal sample preparation, especially in animal species, we developed a robust protocol allowing untargeted LC-HRMS fingerprinting.

Methods

The conditions of extraction (quantity, preparation, solvents, dilutions) were investigated in bovine feces.

Results

A rapid and simple protocol involving feces extraction with methanol (1/3, M/V) followed by centrifugation and a step filtration (10 kDa) was developed.

Conclusion

The workflow generated repeatable and informative fingerprints for robust metabolome characterization.

     

Collagen and fibronectin surface modification of nanoporous anodic alumina and macroporous silicon for endothelial cell cultures

Background

The ability to direct the cellular response by means of biomaterial surface topography is important for biomedical applications. Substrate surface topography has been shown to be an effective cue for the regulation of cellular response. Here, the response of human aortic endothelial cells to nanoporous anodic alumina and macroporous silicon with collagen and fibronectin functionalization has been studied.

Methods

Confocal microscopy and scanning electron microscopy were employed to analyse the effects of the material and the porosity on the adhesion, morphology, and proliferation of the cells. Cell spreading and filopodia formation on macro- and nanoporous material was characterized by atomic force microscopy. We have also studied the influence of the protein on the adhesion.

Results

It was obtained the best results when the material is functionalized with fibronectin, regarding cells adhesion, morphology, and proliferation.

Conclusion

These results permit to obtain chemical modified 3D structures for several biotechnology applications such as tissue engineering, organ-on-chip or regenerative medicine.

     

Crystal structure of <Emphasis Type="Italic">Escherichia coli</Emphasis> protein ybgI,a toroidal structure with a dinuclear metal site

Background

The protein encoded by the gene ybgI was chosen as a target for a structural genomics project emphasizing the relation of protein structure to function.

Results

The structure of the ybgI protein is a toroid composed of six polypeptide chains forming a trimer of dimers. Each polypeptide chain binds two metal ions on the inside of the toroid.

Conclusion

The toroidal structure is comparable to that of some proteins that are involved in DNA metabolism. The di-nuclear metal site could imply that the specific function of this protein is as a hydrolase-oxidase enzyme.

     

Life cycle assessment of chitosan production in India and Europe

Purpose

The aim of this article is to present the first life cycle assessment of chitosan production based on data from two real producers located in India and Europe. The goal of the life cycle assessment (LCA) was to understand the main hot spots in the two supply chains, which are substantially different in terms of raw materials and production locations.

Methods

The LCA is based on consequential modelling principles, whereby allocation is avoided by means of substitution, and market mixes include only flexible, i.e. non-constrained suppliers. The product system is cradle to gate and includes the production of raw materials, namely waste shells from snow crab and shrimp in Canada and India, respectively, the processing of these in China and India and the manufacture of chitosan in Europe and India. Primary data for chitin and chitosan production were obtained from the actual producers, whereas raw material acquisition as well as waste management activities were based on literature sources. The effects of indirect land use change (iLUC) were also included. Impact assessment was carried out at midpoint level by means of the recommended methods in the International Life Cycle Data (ILCD) handbook.

Results and discussion

In the Indian supply chain, the production of chemicals (HCl and NaOH) appears as an important hot spot. The use of shrimp shells as raw material affects the market for animal feed, resulting in a credit in many impact indicators, especially in water use. The use of protein waste as fertilizer is also an important source of greenhouse-gas and ammonia emissions. In the European supply chain, energy use is the key driver for environmental impacts, namely heat production based on coal in China and electricity production in China and Europe. The use of crab shells as raw material avoids the composting process they would be otherwise subject to, leading to a saving in composting emissions, especially ammonia. In the Indian supply chain, the effect of iLUC is relevant, whereas in the European one, it is negligible.

Conclusions

Even though we assessed two products from the same family, the results show that they have very different environmental profiles, reflecting their substantially different supply chains in terms of raw material (shrimp shells vs. crab shells), production locations (locally produced vs. a global supply chain involving three continents) and the different applications (general-purpose chitosan vs. chitosan for the medical sector).

     

Effectiveness of revascularization of the ulcerated foot in diabetic patients with peripheral artery disease for one year follow-up

Background

Diabetes is an important risk factor for atherosclerosis. The diabetic foot is characterized by the presence of arteriopathy and neuropathy. When ischemia is diagnosed, restoration of pulsatile blood flow by revascularization may be considered for salvaging the limb. The treatment options are angioplasty with or without stenting and surgical bypass or hybrid procedures combining the two.

Aims

To evaluate the outcomes of severe ischemic diabetic foot ulcers for which percutaneous transluminal angioplasty (PTA) was considered as the first-line vascular procedure. Factors associated with successful PTA were also evaluated.

Methods

In 80 consecutive diabetic patients with foot ulcers and severe limb ischemia, PTAwas performed if feasible. All patients were followed until healing or for one year. Clinical and angiographic factors in fluencing outcomes after PTA were sought by univariate and multivariate analysis.

Results

PTAwas done in 73 of the 80 (91.2%) patients, and considered clinically succe ssful in 58(79.9%). Successful PTA was significantly higher in patients with Superficial femoral artery, posterior Tibialis and dorsalis pedis arteries involvement in the univariate analysis. Seven patients were expired during the study follow up due to MI, pulmonary thromboembolism and GI bleeding.

Conclusion

PTA in diabetic patients with severe ischemic foot ulcers provided favorable. Some parameters could be used for predicting PTA successfulness.

     

A lost opportunity for science: journals promote data sharing in metabolomics but do not enforce it

Introduction

Data sharing is being increasingly required by journals and has been heralded as a solution to the ‘replication crisis’.

Objectives

(i) Review data sharing policies of journals publishing the most metabolomics papers associated with open data and (ii) compare these journals’ policies to those that publish the most metabolomics papers.

Methods

A PubMed search was used to identify metabolomics papers. Metabolomics data repositories were manually searched for linked publications.

Results

Journals that support data sharing are not necessarily those with the most papers associated to open metabolomics data.

Conclusion

Further efforts are required to improve data sharing in metabolomics.

     

Mitochondrial aconitase is a key regulator of energy production for growth and protein expression in Chinese hamster ovary cells

Introduction

Mammalian cells like Chinese hamster ovary (CHO) cells are routinely used for production of recombinant therapeutic proteins. Cells require a continuous supply of energy and nutrients to sustain high cell densities whilst expressing high titres of recombinant proteins. Cultured mammalian cells are primarily dependent on glucose and glutamine metabolism for energy production.

Objectives

The TCA cycle is the main source of energy production and its continuous flow is essential for cell survival. Modulated regulation of TCA cycle can affect ATP production and influence CHO cell productivity.

Methods

To determine the key metabolic reactions of the cycle associated with cell growth in CHO cells, we transiently silenced each gene of the TCA cycle using RNAi.

Results

Silencing of at least four TCA cycle genes was detrimental to CHO cell growth. With an exception of mitochondrial aconitase (or Aco2), all other genes were associated with ATP production reactions of the TCA cycle and their resulting substrates can be supplied by other anaplerotic and cataplerotic reactions. This study is the first of its kind to have established key role of aconitase gene in CHO cells. We further investigated the temporal effects of aconitase silencing on energy production, CHO cell metabolism, oxidative stress and recombinant protein production.

Conclusion

Transient silencing of mitochondrial aconitase inhibited cell growth, reduced ATP production, increased production of reactive oxygen species and reduced cell specific productivity of a recombinant CHO cell line by at least twofold.

     

Metabolites predict cardiovascular disease events in persons living with HIV: a pilot case–control study

Introduction

Persons living with HIV (PLWH) are at higher risk for cardiovascular disease (CVD) events than uninfected persons. Current risk-stratification methods to define PLWH at highest risk for CVD events are lacking.

Methods

Using tandem flow injection mass spectrometry, we quantified plasma levels of 60 metabolites in 24 matched pairs of PLWH [1:1 with and without known coronary artery disease (CAD)]. Metabolite levels were reduced to interpretable factors using principal components analysis.

Results

Factors derived from short-chain dicarboxylacylcarnitines (SCDA) (p?=?0.08) and glutamine/valine (p?=?0.003) were elevated in CAD cases compared to controls.

Conclusion

SCDAs and glutamine/valine may be valuable markers of cardiovascular risk among persons living with HIV in the future, pending validation in larger cohorts.

     

Untargeted metabolomics suffers from incomplete raw data processing

Introduction

Untargeted metabolomics is a powerful tool for biological discoveries. To analyze the complex raw data, significant advances in computational approaches have been made, yet it is not clear how exhaustive and reliable the data analysis results are.

Objectives

Assessment of the quality of raw data processing in untargeted metabolomics.

Methods

Five published untargeted metabolomics studies, were reanalyzed.

Results

Omissions of at least 50 relevant compounds from the original results as well as examples of representative mistakes were reported for each study.

Conclusion

Incomplete raw data processing shows unexplored potential of current and legacy data.

     

A methodology for elucidating regulatory mechanisms leading to changes in lipid profiles

Introduction

It is difficult to elucidate the metabolic and regulatory factors causing lipidome perturbations.

Objectives

This work simplifies this process.

Methods

A method has been developed to query an online holistic lipid metabolic network (of 7923 metabolites) to extract the pathways that connect the input list of lipids.

Results

The output enables pathway visualisation and the querying of other databases to identify potential regulators. When used to a study a plasma lipidome dataset of polycystic ovary syndrome, 14 enzymes were identified, of which 3 are linked to ELAVL1—an mRNA stabiliser.

Conclusion

This method provides a simplified approach to identifying potential regulators causing lipid-profile perturbations.

     

NMRProcFlow: a graphical and interactive tool dedicated to 1D spectra processing for NMR-based metabolomics

Introduction

Concerning NMR-based metabolomics, 1D spectra processing often requires an expert eye for disentangling the intertwined peaks.

Objectives

The objective of NMRProcFlow is to assist the expert in this task in the best way without requirement of programming skills.

Methods

NMRProcFlow was developed to be a graphical and interactive 1D NMR (¹H & ¹³C) spectra processing tool.

Results

NMRProcFlow (http://nmrprocflow.org), dedicated to metabolic fingerprinting and targeted metabolomics, covers all spectra processing steps including baseline correction, chemical shift calibration and alignment.

Conclusion

Biologists and NMR spectroscopists can easily interact and develop synergies by visualizing the NMR spectra along with their corresponding experimental-factor levels, thus setting a bridge between experimental design and subsequent statistical analyses.

     

KniMet: a pipeline for the processing of chromatography–mass spectrometry metabolomics data

Introduction

Data processing is one of the biggest problems in metabolomics, given the high number of samples analyzed and the need of multiple software packages for each step of the processing workflow.

Objectives

Merge in the same platform the steps required for metabolomics data processing.

Methods

KniMet is a workflow for the processing of mass spectrometry-metabolomics data based on the KNIME Analytics platform.

Results

The approach includes key steps to follow in metabolomics data processing: feature filtering, missing value imputation, normalization, batch correction and annotation.

Conclusion

KniMet provides the user with a local, modular and customizable workflow for the processing of both GC–MS and LC–MS open profiling data.

     

Peatland vascular plant functional types affect dissolved organic matter chemistry

Aims

The readily available global rock phosphate (P) reserves may be depleted within the next 50–130 years warranting careful use of this finite resource. We develop a model that allows us to assess a range of P fertiliser and soil management strategies for Barley in order to find which one maximises plant P uptake under certain climate conditions.

Methods

Our model describes the development of the P and water profiles within the soil. Current cultivation techniques such as ploughing and reduced till gradient are simulated along with fertiliser options to feed the top soil or the soil right below the seed.

Results

Our model was able to fit data from two barley field trials, achieving a good fit at early growth stages but a poor fit at late growth stages, where the model underestimated plant P uptake. A well-mixed soil (inverted and 25 cm ploughing) is important for optimal plant P uptake and provides the best environment for the root system.

Conclusions

The model is sensitive to the initial state of P and its distribution within the soil profile; experimental parameters which are sparsely measured. The combination of modelling and experimental data provides useful agricultural predictions for site specific locations.

     

Mapping data elements to terminological resources for integrating biomedical data sources

Background

Data integration is a crucial task in the biomedical domain and integrating data sources is one approach to integrating data. Data elements (DEs) in particular play an important role in data integration. We combine schema- and instance-based approaches to mapping DEs to terminological resources in order to facilitate data sources integration.

Methods

We extracted DEs from eleven disparate biomedical sources. We compared these DEs to concepts and/or terms in biomedical controlled vocabularies and to reference DEs. We also exploited DE values to disambiguate underspecified DEs and to identify additional mappings.

Results

82.5% of the 474 DEs studied are mapped to entries of a terminological resource and 74.7% of the whole set can be associated with reference DEs. Only 6.6% of the DEs had values that could be semantically typed.

Conclusion

Our study suggests that the integration of biomedical sources can be achieved automatically with limited precision and largely facilitated by mapping DEs to terminological resources.

     

Iridoid and phenylethanoid/phenylpropanoid metabolite profiles of <Emphasis Type="Italic">Scrophularia</Emphasis> and <Emphasis Type="Italic">Verbascum</Emphasis> species used medicinally in North America

Introduction

Botanicals containing iridoid and phenylethanoid/phenylpropanoid glycosides are used worldwide for the treatment of inflammatory musculoskeletal conditions that are primary causes of human years lived with disability, such as arthritis and lower back pain.

Objectives

We report the analysis of candidate anti-inflammatory metabolites of several endemic Scrophularia species and Verbascum thapsus used medicinally by peoples of North America.

Methods

Leaves, stems, and roots were analyzed by ultra-performance liquid chromatography-mass spectrometry (UPLC-MS) and partial least squares-discriminant analysis (PLS-DA) was performed in MetaboAnalyst 3.0 after processing the datasets in Progenesis QI.

Results

Comparison of the datasets revealed significant and differential accumulation of iridoid and phenylethanoid/phenylpropanoid glycosides in the tissues of the endemic Scrophularia species and Verbascum thapsus.

Conclusions

Our investigation identified several species of pharmacological interest as good sources for harpagoside and other important anti-inflammatory metabolites.

     

Life cycle assessment in the furniture industry: the case study of an office cabinet

Purpose

In an effort to reduce the environmental impacts of the furniture sector, this study aimed to diagnose the environmental performance of an office cabinet throughout its life cycle.

Methods

An attributional life cycle assessment (LCA) was used, based on the ISO 14044 Standard and ILCD Handbook. The scope of the study considered the entire supply chain, from cradle to grave, including the steps of pre-manufacturing, manufacturing, use, and post-use of the product. The impact assessment method was the International Reference Life Cycle Data System (ILCD) 2011 midpoint.

Results and discussion

The results identified that the most significant environmental impact of the furniture life cycle was due to the distances covered and production of the main raw material, wood medium-density particleboard (MDP). The evaluation of transport scenarios showed environmental tradeoffs for truck fuel switches and environmental gains for the distribution of MDP from closer suppliers by truck, as well as from current supplier by truck and ship in the major categories. Furthermore, evaluation of the office cabinet post-use options showed that reuse, recycling, or energy recovery from waste cause significant environmental gains in the major categories. Wooden furniture is a potential carbon sink if its life cycle does not emit more greenhouse gases than its materials can store. The impacts of substitution scenarios varied depending on the type of product avoided.

Conclusions

The LCA proved a powerful method to diagnose and manage environmental impacts in complex product systems. The sensitivity analysis showed that it is possible to reduce the environmental impacts and, at the same time, make the furniture industry increase its economic gains and net carbon stock in the anthroposphere.