Spectrophotometric assay for protease activity in ionic liquids using chromogenic substrates

A new spectrophotometric assay has been developed to evaluate protease activity in ionic liquids (ILs). The assay consists of two strategies to enable real-time spectrometric analysis of enzymatic reaction in ILs. First, enzymes are modified with a comb-shaped poly(ethylene glycol), PM₁₃, to obtain a transparent enzyme solution in IL. Second, a chromogenic substrate is used to follow the enzymatic reaction in IL. p-Nitroaniline-derivatized substrates are subjected to protease-catalyzed alcoholysis to release chromogenic p-nitroaniline that can be quantitatively detected by a UV-Vis spectrophotometer. By using this method, we can evaluate protease activity in ILs quite easily without separation of products from the reaction mixture. The availability of the novel assay system was demonstrated in a kinetic analysis of subtilisin-catalyzed reaction in the IL 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Emim][Tf₂N]) under different reaction conditions. Because two different serine proteases, subtilisin and α-chymotrypsin, substantially retained its original substrate specificity in the IL, the assay can be extended to other enzymes by using suitable chromogenic substrates.     

Insoluble chromolytic substrates for the determination of proteolytic activity

New insoluble chromolytic substrates for the determination of proteolytic activity were prepared by incorporation of dyed proteins into the structure of calcium sulphate dihydrate. The prepared substrates could detect approximately 0.25–1.0 μg of trypsin per ml. The spontaneous leakage of dyed substances in water solutions was negligible.     

Fluorogenic ester substrates to assess proteolytic activity

The synthesis of a new type of fluorogenic ester substrates is described. Prepared from fluorescein in three steps with common commercially available precursors, they all generate bright green fluorescence upon proteolysis. Their particular structure allows the same substrate be used to report enzymatic activity of various proteases from serine and cysteine superfamilies. The substrate cleavage is sensitive to specific protease inhibitors providing a tool for inhibitor screening.     

An assay of collagenase activity using enzyme-linked immunosorbent assay for mammalian collagenase

A new method was developed for the measurement of collagenase activity using the enzyme-linked immunosorbent assay (ELISA). Rabbit colon wall collagenase, pepsin-soluble rat skin type I collagen, and its antisera were used in the present experiment. After the collagenase-degraded portion of the collagen coated on the microwell was released, the immunoreaction of the residual collagen on the microwell to anticollagen sera was determined by ELISA. This method was approximately 10 times more sensitive than the conventional assay procedure using [14C]-glycine-labeled reconstituted collagen fibrils as substrate. It was suitable for screening a large number of samples without radioisotopes.     

Development of novel assays for proteolytic enzymes using rhodamine-based fluorogenic substrates

Components within synthetic chemical and natural product extract libraries often interfere with fluorescence-based assays. Fluorescence interference can result when the intrinsic spectral properties of colored compounds overlap with the fluorescent probes. Typically, fluorescence-based protease assays use peptide amidomethylcoumarin derivatives as substrates. However, because many organic compounds absorb in the ultraviolet region, they can interfere with coumarin-based fluorescence assays. Red-shifted fluorescent dyes such as peptidyl rhodamine derivatives are useful because there is generally less interference from organic compounds outside the ultraviolet wavelengths. In this report, rhodamine-based fluorogenic substrates, such as bis-(Leu)(2)-Rhod110 and bis-(Ala-Pro)-Rhod110, were developed for leucine aminopeptidase and dipeptidyl aminopeptidase. Novel, tandem rhodamine substrates such as Ala-Pro-Rhod110-Leu were designed with 2 protease cleavage sites and used to assay 2 proteases in a multiplex format. General endpoint high-throughput screening (HTS) assays were also developed for leucine aminopeptidase, dipeptidyl aminopeptidase, and trypsin that incorporated both amidomethylcoumarin and rhodamine-based fluorogenic substrates into a single screening format. These dual-substrate assays allowed for the successful screening of the LOPAC trade mark collection and natural product extracts despite high levels of fluorescence interference.     

A sensitive assay for proteolytic activity using fluorescein-labeled gelatin coupled to Sepharose 4B as substrate

A method for the determination of proteolytic activity is described which uses fluorescein-labeled gelatin coupled to Sepharose 4B as substrate. The assay is simple and sensitive allowing detection of one nanogram of trypsin and is found suitable for the measurement of gelatinolytic activity in tissue samples.     

An easy assay for histone acetyltransferase activity using a PhosphorImager

A simple radiometric assay for histone acetyltransferase (HAT) activity employing a PhosphorImager is described. In the proposed procedure, following incubation of [1-¹⁴C]acetyl coenzyme A (CoA), histones, and HAT enzyme, radiolabeled histones are fixed on GF/F glass microfiber filter while the excess of acetyl CoA is washed out. Afterward, the filter is exposed to a phosphor-screen and the resulting spot signals are quantified with a PhosphorImager. Given the small volumes required, the new assay reduces reagent consumption and contaminated waste. Moreover, the assay can be performed with a large number of samples simultaneously, is applicable on different protein substrates, and is adaptable to the analysis of other protein modifications.     

Development of a protease activity assay using heat-sensitive Tus-GFP fusion protein substrates

Proteases are implicated in various diseases and several have been identified as potential drug targets or biomarkers. As a result, protease activity assays that can be performed in high throughput are essential for the screening of inhibitors in drug discovery programs. Here we describe the development of a simple, general method for the characterization of protease activity and its use for inhibitor screening. GFP was genetically fused to a comparatively unstable Tus protein through an interdomain linker containing a specially designed protease site, which can be proteolyzed. When this Tus–GFP fusion protein substrate is proteolyzed it releases GFP, which remains in solution after a short heat denaturation and centrifugation step used to eliminate uncleaved Tus–GFP. Thus, the increase in GFP fluorescence is directly proportional to protease activity. We validated the protease activity assay with three different proteases, i.e., trypsin, caspase 3, and neutrophil elastase, and demonstrated that it can be used to determine protease activity and the effect of inhibitors with small sample volumes in just a few simple steps using a fluorescence plate reader.     

An assay for acidic peptide substrates of protein kinases

The assay of acidic peptides as substrates for protein kinases has not been as easy to perform as testing basic peptides or polypeptides. We have developed a simple, rapid, and cost-effective procedure that allows the design and testing of potential peptide substrates without the constraints imposed by the phosphocellulose filter paper method (the need to incorporate positively charged residues into the peptide sequence). The technique combines the chelation of 32Pi by acid molybdate with PEI-cellulose chromatography. In this way the migration of 32P-labeled Pi, ATP, and protein are impeded while phosphopeptide is eluted in 1.5 ml from a 0.25-ml disposable column. In order to validate the assay we used two angiotensin II analogues as peptide substrates for the protein tyrosine kinase pp60c-src. The assay results using the new procedure were compared to those of the phosphocellulose filter paper technique. We also demonstrated the use of this method to test linear and cyclic peptides that could not be assayed with the phosphocellulose paper technique. This assay will aid those who are attempting to determine the substrate specificity of protein kinases.     

Phosphatase assay for multi-phosphorylated substrates using phosphatase specific-motif antibody

Protein phosphorylation plays central roles in a wide variety of signal transduction pathways and most phosphorylated proteins contain multi-phosphorylated sites. PPM1 type Ser/Thr protein phosphatase family is known to show rigid substrate specificity unlike other Ser/Thr phosphatase PPP family including PP1, PP2A and PP2B. PPM1 type phosphatases are reported to play important roles in growth regulation and in cellular stress signalling. In this study, we developed a phosphatase assay of PPM1D using phosphatase motif-specific antibody. PPM1D is a member of PPM1 type Ser/Thr phosphatase and known to dephosphorylate Ser(P)-Gln sequence. The gene amplification and overexpression of PPM1D were reported in many human cancers. We generated the monoclonal antibody specific for the Ser(P)-Gln sequence, named 3G9-H11. The specificity of this method using ELISA enables the convenient measurement of the dephosphorylation level of only PPM1D target residues of substrate peptides with multiple phosphorylated sites in the presence of multiple phosphatases. In addition, the antibody was applicable to immunoblotting assay for PPM1D function analysis. These results suggested that this method should be very useful for the PPM1D phosphatase assay, including high-throughput analysis and screening of specific inhibitors as anti-cancer drugs. The method using phosphatase motif-specific antibody can be applied to other PPM1 phosphatase family.     

Visual detection of peptidase activity using fluorogenic substrates in a microtiter plate assay

A simple, inexpensive, and sensitive assay for peptidase activity has been devised. The assay was performed in a microtiter plate and was based on fluorogenic peptide substrates, many of which are commercially available. 7-Amino-4-methyl coumarin the fluorescent product liberated during an incubation period of between 1 and 16 h, was detected by inspection of the plate under ultraviolet light of wavelength 356 nm. A fluorometer was not required. Using alpha-chymotrypsin as a model enzyme, with succinyl-L-alanyl-L-alanyl-L-prolyl-L-phenylalanine 4-methyl-coumaryl-7-amide as substrate, it was shown that as little as 4 fmol of enzyme could be detected. The method was non-quantitative and was particularly suited to location of enzyme activity in fractions during a purification procedure. The validity of the assay was demonstrated by detection of activity of a known enzyme, alpha-chymotrypsin, after its purification by size-exclusion high-performance liquid chromatography. The method was used to locate two forms of aminopeptidase activity, in fractions from size-exclusion chromatography of an extract from reproductive tissue of Helix aspersa, using L-leucine 4-methyl-coumaryl-7-amide as substrate.     

Development of a high-throughput liquid state assay for lipase activity using natural substrates and rhodamine B

A fluorescence-based assay for the determination of lipase activity using rhodamine B as an indicator, and natural substrates such as olive oil, is described. It is based on the use of a rhodamine B–natural substrate emulsion in liquid state, which is advantageous over agar plate assays. This high-throughput method is simple and rapid and can be automated, making it suitable for screening and metagenomics application. Reaction conditions such as pH and temperature can be varied and controlled. Using triolein or olive oil as a natural substrate allows monitoring of lipase activity in reaction conditions that are closer to those used in industrial settings. The described method is sensitive over a wide range of product concentrations and offers good reproducibility.     

In-gel protein phosphatase assay using fluorogenic substrates

We developed a method for the detection of phosphatase activity using fluorogenic substrates after polyacrylamide gel electrophoresis. When phosphatases such as Ca²⁺/calmodulin-dependent protein kinase phosphatase (CaMKP), protein phosphatase 2C (PP2C), protein phosphatase 5 (PP5), and alkaline phosphatase were resolved by polyacrylamide gel electrophoresis in the absence of SDS and the gel was incubated with a fluorogenic substrate such as 4-methylumbelliferyl phosphate (MUP), all of these phosphatase activities could be detected in situ. Although 6,8-difluoro-4-methylumbelliferyl phosphate (DiFMUP) as well as MUP could be used as a fluorogenic substrate for an in-gel assay, MUP exhibited lower background fluorescence. Using this procedure, several fluorescent bands that correspond to endogenous phosphatases were observed after electrophoresis of various crude samples. The in-gel phosphatase assay could also be used to detect protein phosphatases resolved by SDS-polyacrylamide gel electrophoresis. In this case, however, the denaturation/renaturation process of resolved proteins was necessary for the detection of phosphatase activity. This procedure could be used for detection of renaturable protein phosphatases such as CaMKP and some other phosphatases expressed in cell extracts. The present fluorescent in-gel phosphatase assay is very useful, since no radioactive compounds or no special apparatus are required.     

An assay for 26S proteasome activity based on fluorescence anisotropy measurements of dye-labeled protein substrates

The 26S proteasome is the molecular machine at the center of the ubiquitin proteasome system and is responsible for adjusting the concentrations of many cellular proteins. It is a drug target in several human diseases, and assays for the characterization of modulators of its activity are valuable. The 26S proteasome consists of two components: a core particle, which contains the proteolytic sites, and regulatory caps, which contain substrate receptors and substrate processing enzymes, including six ATPases. Current high-throughput assays of proteasome activity use synthetic fluorogenic peptide substrates that report directly on the proteolytic activity of the proteasome, but not on the activities of the proteasome caps that are responsible for protein recognition and unfolding. Here, we describe a simple and robust assay for the activity of the entire 26S proteasome using fluorescence anisotropy to follow the degradation of fluorescently labeled protein substrates. We describe two implementations of the assay in a high-throughput format and show that it meets the expected requirement of ATP hydrolysis and the presence of a canonical degradation signal or degron in the target protein.