Glucose oxidase release from calcium alginate gel capsules

Diffusion of glucose oxidase within calcium alginate gel capsules has been assayed and the experimental data fitted to a simple semi-empirical power equation, which is used to analyse the solute release from polymeric devices. It was found that an increase in the concentration of sodium alginate and calcium chloride gives rise to a reduction in the enzyme leakage. This was verified when glucose oxidase (GOD) diffusion percentages were compared in capsules with thicknesses of the same order of magnitude but obtained under different experimental conditions. So, the use of sodium alginate and calcium chloride solutions of concentrations 0.5% w/v and 2.6% w/v, respectively, lead to a diffusion percentage of 25 +/- 2. This percentage was reduced to 8 +/- 3 when sodium alginate and calcium chloride concentrations were fixed at 1% w/v and 4% w/v, respectively, even though the thicknesses of the capsules were of the same order of magnitude.     

Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.     

Diffusion characteristics of calcium alginate gels.

The diffusivity of a protein solute (bovine serum albumin) within calcium alginate gels made from sodium alginate of different guluronic acid content was determined. It was found that protein diffusion within alginate gels, prepared to be isotropic in structure, was greatest for gels prepared from sodium alginate of low guluronic acid content as opposed to those prepared from sodium alginate of high guluronic acid content. This finding was explained in terms of the difference in flexibility of the polymer backbone of the two alginates. The greater the polymer backbone flexibility, the greater the solute diffusivity within the gel.     

Use of holographic laser interferometry to study the diffusion of polymers in gels

The aim of this study was to demonstrate the potential for holographic interferometry to be used for diffusion studies of large molecules in gels. The diffusion and partitioning of BSA (67,000 g/mol) and pullulans (5,900-112,000 g/mol) in agarose gel were investigated. The gel diffusion coefficients obtained for BSA were higher when distilled water was used as a solvent compared to those obtained with 0.1 M NaCl as the solvent. Furthermore, the gel diffusion coefficient increased with increasing BSA concentration. The same trend was found for liquid BSA diffusion coefficients obtained by DLS. BSA partition coefficients obtained at different agarose gel concentrations (2-6%, w/w) decreased slightly with increasing gel concentration. However, all BSA gel diffusion coefficients measured were significantly lower than those in pure solvent and they decreased with increasing agarose concentration. The gel diffusion coefficients obtained for pullulans decreased with increasing pullulan molecular weight. The same effect from increased molecular weight was seen in the liquid diffusion coefficients measured by DLS. The pullulan partition coefficients obtained decreased with increasing molecular weight. However, pullulans with a larger Stokes' radius than BSA had partition coefficients that were higher or approximately the same as BSA. This implied that the pullulan molecules were more flexible than the BSA molecules. The results obtained for BSA in this study agreed well with other experimental studies. In addition, the magnitude of the relative standard deviation was acceptable and in the same range as for many other methods. The results thereby obtained showed that holographic interferometry is a suitable method for studying diffusion of macromolecules in gels.     

Determination of the effective diffusion coefficient of oxygen in gel materials in relation to gel concentration

Summary The effective diffusion coefficient of oxygen, ID_e, was determined in different gel support materials (calcium alginate, -carrageenan, gellan gum, agar and agarose) which are generally used for immobilization of cells. The method used was based upon fitting Crank's model on the experimental data. The model describes the solute diffusion from a well-stirred solution into gel beads which are initially free of solute. The effect of the gel concentration on ID_e of oxygen in the gel was investigated. The results showed a decreasing ID_e for both agar and agarose at increasing gel concentration. In case of calcium alginate and gellan gum, a maximum in ID_e at the intermediate gel concentration was observed. It is hypothesized that this phenomenon is due to a changing gelpore structure at increasing gel concentrations. The ID_e of oxygen in calcium alginate, -carrageenan and gellan gum varied from 1.5^*10^–9 to 2.1^*10^–9 m²s^–1 in the gel concentration range of 0.5 to 5% (w/v).     

Optical anisotropy of calcium-induced alginate gels

Alginate gels formed by diffusion of calcium ions into solutions of sodium alginate were found to exhibit optical anisotropy depending on preparation conditions. When observed under crossed nicols, the anisotropic alginate gels showed a birefringence pattern which is characteristic of radial orientation of polymer chains. Calcium alginate gels were prepared from different concentrations of sodium alginate and calcium ion, and the conditions for formation of the anisotropic gels were determined. The gel-formation process was measured by monitoring the development of the birefringent layer and was compared with the model in which the diffusion of calcium ions dominates gel formation.     

类囊体膜生物传感器的固定化研究

本实验以菠菜为材料 ,经过提取 ,用PUA SbQ、海藻酸钙和戊二醛—牛血清蛋白三种固定方法在 4 0孔板上固定得到固定化的类囊体膜 ,用酶标仪连续测定 8周固定化类囊体膜的光合活力变化。结果表明 :PVA SbQ固定方法最好 ,8周后测定的活性仍保持在 6 1 2 2 %左右。     

Penicillin G production by immobilized fungal vesicles

Summary The activity of penicillin G production was compared in a well defined medium by native vesicles as well as by calcium alginate gel immobilized vesicles isolated from the protoplasts of Penicillium chrysogenum PQ-96. The activity yield of the immobilized vesicles was 44% in comparison with native vesicles. After 60 h of storage at 4° C the native vesicles showed a rapid decrease in penicillin G production. The storage stability of these vesicles was improved after entrapment inside the calcium alginate gel. After 240 h of storage 1 mg of immobilized vesicular protein catalyzed the production of about 140 nmoles of penicillin G in 1 h.     

A novel encapsulation technique for the production of artificial seeds

A novel technique for the encapsulation of plant material in calcium alginate hollow beads was tested. The technique involves suspending plant material (i.e. plant cells, tissues, organs, shoot tips, somatic embryos) in a solution containing carboxymethylcellulose and calcium chloride and then dripping it into a stirred sodium alginate solution. In initial experiments with Daucus carota (carrot), it was found that after 14 days of cultivation, 100 % of seeds encapsulated in calcium alginate hollow beads would germinate in the liquid core and that 13% would burst the capsules. Embryogenic calli developed inside hollow beads and formed somatic embryos while calli in conventional calcium alginate beads became detached from the beads early in development, and no somatic embryogenesis occurred. With Solanum tuberosum (potato), development of calli was observed in 50% of hollow beads. Eighty-one percent of shoot tips encapsulated in hollow beads sprouted and grew out of the capsules. Received: 28 October 1999 / Revision received: 11 February 2000 / Accepted: 22 February 2000     

Hyaluronate-alginate gel as a novel biomaterial: mechanical properties and formation mechanism

With the aim of producing a biomaterial for surgical applications, the alginate-hyaluronate association has been investigated to combine the gel-forming properties of alginate with the healing properties of hyaluronate. Gels were prepared by diffusion of calcium into alginate-hyaluronate mixtures, with an alginate content of 20 mg/mL. The hyaluronate source was shown to have significant effect on the aspect and the properties of the gels. The gels have viscoelastic behaviour and the transient measurements carried out in creep mode could be interpreted through a Kelvin-Voigt generalised model: experimental data led to the steady state hardness and a characteristic viscosity of the gel. Gels prepared from Na rooster comb hyaluronate with weight ratio up to 0.50 have satisfactory mechanical properties, and fully stable gels are obtained after a few days; on the contrary, use of lower molecular weight hyaluronate led to loose gels for hyaluronate contents over 0.25. Gel formation was investigated by measurements of the exchange fluxes between the calcium chloride solution and the forming gel, which allowed thorough investigations of the occuring diffusion phenomena of water, calcium ion and hyaluronate. Strong interactions of water with hyaluronate reduce significantly the rate of weight loss from the gel beads and allows higher water content in steady-state gels. Calcium content in the gel samples could be correlated to the actual alginate concentration, whatever the nature and the weight ratio of hyaluronate.     

Studies on the characteristics of alginate gels in relation to their use in separation and immobilized applications

Studies on diffusion of NAD and hemoglobin from calcium and barium gels are reported where alginate grade, concentration, and gel dimensions were varied. These show that NAD diffusion characteristics are unaffected by alginate and ion concentrations; however, hemoglobin diffusion is affected by alginate concentration. Both hemoglobin and NAD diffusion patterns were shown to be affected by alginate gel dimensions. Studies are reported that show that polymannuronic alginate gels posses good porosity characteristics while polyguluronic alginates from gels with lower porosity, specifically with respect to high-molecular-weight compounds. These findings are discussed with the view to the use of alginate gels for immobilization, solids separation, and diffusion chromatography techniques.     

Mathematical modeling of ethanol production by immobilized Zymomonas mobilis in a packed bed fermenter

A mathematical model which describes ethanol production in a packed bed fermenter containing. Zymomonas mobilis entrapped in small spheres of calcium alginate within a packed bed fermenter has been developed. The equations combine simultaneous diffusion and reaction as well as a complex flow pattern to calculate glucose and ethanol profiles in the column type reactor. As part of the study, diffusivity values for glucose and ethanol in cell-loaded calcium alginate were determined. Also a freecell kinetic expression for Z. mobilis at 33 degrees C and ph 6.0 was developed. Comparison of the model with actual experimental results were made showing average deviations of ca. 30-40%.     

Characterisation of the shrinkage of calcium alginate gel membrane with immobilised Lactobacillus rhamnosus

To quantify the shrinkage of calcium alginate gel membrane as a support matrix for immobilising cells during the fermentation of Lactobacillus rhamnosus, factors including time, pH, membrane thickness, and the concentrations of immobilised cells, lactic acid, glucose, and calcium chloride were examined by statistical experimental design. A Plackett-Burman design was used for the first screening experiment to identify the important factors which caused the divergent effects. Uniform Design, a powerful modelling design technique, was thus chosen to design the modelling experiments. Through a non-linear step-wise regression analysis, the predictive mathematical model of the shrinkage in membrane thickness was established and the significant main effects and two-factor interactions were identified. However, no significant model equations could be obtained for the shrinkage in area and volume of gel membranes. The methodology developed can be extrapolated to the quantitative characterisation of shrinkage in other immobilised gel matrices, which will be very useful in mathematical modelling, design, operation and scale-up of gel immobilised cell systems. Received: 8 November 1999 / Revision received: 17 January 2000 / Accepted: 23 January 2000     

Electronic speckle pattern interferometry: a tool for determining diffusion and partition coefficients for proteins in gels

The aim of this study was to demonstrate electronic speckle pattern interferometry (ESPI) as a powerful tool in determining diffusion coefficients and partition coefficients for proteins in gels. ESPI employs a CCD camera instead of a holographic plate as in conventional holographic interferometry. This gives the advantage of being able to choose the reference state freely. If a hologram at the reference state is taken and compared to a hologram during the diffusion process, an interferometric picture can be generated that describes the refraction index gradients and thus the concentration gradients in the gel as well as in the liquid. MATLAB is then used to fit Fick's law to the experimental data to obtain the diffusion coefficients in gel and liquid. The partition coefficient is obtained from the same experiment from the flux condition at the interface between gel and liquid. This makes the comparison between the different diffusants more reliable than when the measurements are performed in separate experiments. The diffusion and partitioning coefficients of lysozyme, BSA, and IgG in 4% agarose gel at pH 5.6 and in 0.1 M NaCl have been determined. In the gel the diffusion coefficients were 11.2 +/- 1.6, 4.8 +/- 0.6, and 3.0 +/- 0.3 m(2)/s for lysozyme, BSA, and IgG, respectively. The partition coefficients were determined to be 0.65 +/- 0.04, 0.44 +/- 0.06, and 0.51 +/- 0.04 for lysozyme, BSA, and IgG, respectively. The current study shows that ESPI is easy to use and gives diffusion coefficients and partition coefficients for proteins with sufficient accuracy from the same experiment.     

Characterization of sugar diffusion coefficients in alginate membranes

The diffusivity of several monosaccharides and disaccharides in calcium alginate gels was determined using a specially designed diaphragm cell. The diffusion coefficients of the tested sugars are 4 to 18% smaller in alginate gel than in water and, with the exception of fructose, this difference increases with increasing sugar molecular weight. Also the position of the carbonyl group seems to be determined in the value of the diffusion coefficient - ketoses have lower diffusion coefficients than aldoses.     

Emulsan, a tailorable biopolymer for controlled release

Microsphere hydrogels made with emulsan-alginate were used as carrier for the microencapsulation of blue dextran in order to study the effect of emulsan on the alginate bead stability. Blue dextran release studies indicated an increase of microsphere stability in presence of emulsan, as a coating agent. BSA adsorption by emulsan-alginate microspheres is also enhanced 40% compared to alginate alone. XPS studies confirm the presence of BSA adsorbed on emulsan microsphere surfaces. These results are in agreement with the equilibrium adsorption model of Freundlich. Studies of BSA adsorption using non-equilibrium Lagergren second-order and intraparticle models, are suggesting a complex mechanisms of protein adsorption by chemisorption and intraparticle diffusion. Also, enzymatic release of BSA from emulsan microspheres containing azo-BSA under physiological conditions is suggests the possibility of using microspheres as a depot for pre-proteins of medical interest.     

海藻酸钙包埋氧化亚铁硫杆菌的固定化研究

采用非稳态法测定FeSO4在包埋和未包埋氧化亚铁硫杆菌的凝胶中的有效扩散系数。结果表明,FeSO4在凝胶中的有效扩散系数De随着海藻酸钠浓度的升高而降低,当海藻酸钠浓度为2%时最优;凝胶剂CaCl2的浓度对扩散系数的影响较小。包埋的氧化亚铁硫杆菌在10h达到增殖平衡,而FeSO4在包埋细菌的凝胶内扩散系数明显减少。     

Alginate as immobilization material: III. Diffusional properties

The rate of diffusion of serum albumin (MW 6.9 x 10(4) D) out of beads of calcium alginate gels depends upon the concentration and uronic acid composition of the alginate (ManA/GulA ratio), the conditions under which the beads are produced, the pH, and the temperature. The diffusion coefficient decreases with increasing alginate concentration, and (ManA/GulA) ratio and with decreasing pH. Diffusion out of the beads, in which the alginate is uniformly distributed (homogeneous gel), is faster than out of the beads in which the alginate is concentrated at the surface (inhomogeneous gel). The temperature dependence of the diffusion coefficient follows the Arrhenius law, with an activation energy of approximately 23 kJ x mol(-1).     

Alginate as immobilization matrix and stabilizing agent in a two-phase liquid system: application in lipase-catalysed reactions.

Alginate was evaluated as an immobilization matrix for enzyme-catalyzed reactions in organic solvents. In contrast to most hydrogels, calcium alginate was found to be stable in a range of organic solvents and to retain the enzyme inside the gel matrix. In hydrophobic solvents, the alginate gel (greater than 95% water) thus provided a stable, two-phase liquid system. The lipase from Candida cylindracea, after immobilization in alginate beads, catalysed esterification and transesterification in n-hexane under both batch and continuous-flow conditions. The operational stability of the lipase was markedly enhanced by alginate entrapment. In the esterification of butanoic acid with n-butanol, better results were obtained in the typical hydrophilic calcium alginate beads than in less hydrophilic matrices. The effects of substrate concentration, matrix area, and polarity of the substrate alcohols and of the organic solvent on the esterification activity were examined. The transesterification of octyl 2-bromopropanoate with ethanol was less efficient than that of ethyl 2-bromopropanoate with octanol. By using the hydrophilic alginate gel as an immobilization matrix in combination with a mobile hydrophobic phase, a two-phase liquid system was achieved with definite advantages for a continuous, enzyme-catalysed process.     

Culture of chondrocytes in alginate gel: Variations in conditions of Gelation influence the structure of the alginate gel, and the arrangement and morphology of proliferating chondrocytes

Summary Sodium alginate, which gels in the presence of calcium ions, is commonly used for culture of anchorage-independent cells, such as chondrocytes. Normally, the gel appears microscopically homogeneous but, depending on the conditions of gelation, it may contain a varying number of small channels that extend inward from the surface. We have examined the influence of these channels on the morphology of cultured chondrocytes entrapped in alginate beads. Growth-plate or articular chondrocytes cultured in alginate normally proliferate and form rounded cell clusters but, in alginate beads containing numerous channels, many chondrocytes become aligned and form columns similar to those in the growth plate in vivo. As the pattern of cellular growth and morphology in alginate is profoundly influenced by the presence of channels in the gel, further studies were conducted to determine what specific conditions of gelation affect their formation. The channels are especially numerous when both the alginate and the gelling solutions lack sodium ions or other monovalent cations. The channels are cavities in the gel formed by particulate blocking of the rapid diffusion of calcium ions from the gelling solution into the boundary of the calcium alginate solution, and hence they extend inward from cells at the surface of the alginate gel. An understanding of the conditions under which these channels develop makes it possible either to avoid their formation or, alternatively, to enhance the number of channels in order to encourage proliferating cells to grow in radial columns, rather than in a less organized pattern characteristic of most culture systems.