Effect of ferrous sulphate on nitrification during simultaneous phosphorus removal from domestic wastewater using a laboratory scale anoxic/oxic reactor

In the present study a laboratory scale anoxic/oxic reactor was used to remove the important eutrophication nutrients such as phosphorus and nitrogen from synthetic domestic wastewater. Phosphorus was removed through simultaneous precipitation and was carried out using the coagulant ferrous sulphate FeSO₄ · 7H₂O. Total phosphorus in the effluent was controlled to below 1 mg/l using a ferrous to phosphorus molar ratio of 2.1. pH after the addition of coagulant plays a major role in determining the molar ratio of the precipitant. Nitrogen was removed biologically in the anoxic/oxic system and the effect of simultaneous precipitation on nitrification and denitrification was investigated. The nitrification rate of the system remained unaffected during simultaneous precipitation and varied from 0.046 to 0.059 g N–NH₄ ⁺/g VSS/day. Denitrification was complete and was not affected by the coagulation process. The nitrogen removal efficiency varied from 78% to 85%. COD removal efficiency was not affected during simultaneous precipitation and was varied from 94% to 98%. The highly efficient nitrogen removal in the presence of simultaneous precipitant ferrous sulphate makes the process an ideal option for nutrient removal.     

Influence of the thermochemical sludge pretreatment on the nitrification of A/O reactor with the removal of phosphorus by simultaneous precipitation

In the present study, a laboratory scale anoxic/oxic (A/O) reactor is used for the removal of nutrient and sludge reduction. Phosphorus removal was achieved through simultaneous precipitation, and sludge production was reduced through thermochemical pretreatment. The main objective of the study was to investigate the influence of sludge pretreatment on the nitrification rate. Total phosphorus in the effluent was maintained around 0.5 ～ 1.0 mg/L by simultaneous precipitation, using coagulant alum at 2.2 mole ratio. Before simultaneous precipitation, the nitrification rate of the A/O reactor was found to be 0.050 g N-NH₄ ⁺/g MLVSS.d. The thermochemical sludge pretreatment began on the 120^th day at pH 11 and 80°C. The initiation of sludge pretreatment brought about a significant reduction of the A/O reactor nitrification rate, which fell to 0.038 g N-NH₄ ⁺/g MLVSS/day. The effect of sludge pretreatment was reflected in the reduction of the nitrogen removal efficiency from 85 to 74%. Recycling of the thermochemically pretreated sludge accounted for 57% sludge reduction, which had an adverse influence on the nitrification rate of the system.     

The influence of anaerobic pretreatment on the nitrogen removal from biosynthetic pharmaceutical wastewaters

The C:N ratio of the pharmaceutical wastewaters is usually suitable for a combination of the anaerobic pretreatment with the high COD removal and aerobic posttreatment with the efficient biological N removal. This kind of anaerobic-aerobic process was tested in semipilot scale by using a UASB reactor and an activated sludge system with a predenitrification (total volume 100 1). It was found that at a total HRT of 2.3 days an average of 97.5% of COD and 73.5% of total N was removed. The UASB reactor was operated at 30°C with a volumetric loading rate of 8.7 kg.m^-3.d^-1, the efficiency of COD removal was 92.2%. The processes, which take part in the biological removal of nitrogen, especially the nitrification, were running with lower rates than usually observed in aerobic treatment systems.Abbreviations AAO anaerobic anoxic oxic configuration - AOO anaerobic oxic oxic configuration - B _V volumetric organic loading rate (kg COD.m^-3. d^-1) - dB _x specific COD removal rate (mg COD. g^-1 VSS. d^-1) - DNR denitrification rate (mg N–NO₃. g^-1 VSS. h^-1) - E_COD efficiency of COD removal (%) - HRT hydraulic retention time (d) - NR nitrification rate (mg N–NO₃. g^-1 VSS. h^-1) - R recirculation ratio (%) - SBP specific biogas production (m³.kg^-1 removed COD) - SRT solids retention time; sludge age (d) - SS suspended solids (g.1^-1) - UASB upflow anaerobic sludge blanket reactor - VSS volatile suspended solids (g.1^-1)     

Control of carbon and ammonium ratio for simultaneous nitrification and denitrification in a sequencing batch bioreactor

This study shows how the carbon and nitrogen (C/N) ratio controls the simultaneous occurrence of nitrification and denitrification in a sequencing batch reactor (SBR). Data demonstrated that a low C/N ratio resulted in a rapid carbon deficit, causing an unbalanced simultaneous nitrification–denitrification (SND) process in SBR. When the initial COD/NH₄⁺-N ratio was adjusted to 11.1, the SND-based SBR achieved complete removal of NH₄-N and COD without leaving any NO₂⁻-N in the effluent. The nitrogen removal efficiency decreases gradually with increasing ammonium-loading rate to the SND–SBR system. Altogether, data showed that appropriate controls of carbon and nitrogen input are required to achieve an efficient SND–SBR. An established SND technology can save operation time and energy, and might replace the traditional two-stage biological nitrification and denitrification process.     

Enhanced nutrient removal in three types of step feeding process from municipal wastewater

An anoxic/oxic step feeding process was improved to enhance nutrient removal by reconfiguring the process into (1) anaerobic/anoxic/oxic step feeding process or (2) modified University of Capetown (UCT) step feeding process. Enhanced nitrogen and phosphorus removal and optimized organics utilization were obtained simultaneously in the modified UCT type with both internal and sludge recycle ratios of 75% as well as anaerobic/anoxic/oxic volume ratio of 1:3:6. Specifically, the UCT configuration and optimized operational conditions lead to the enrichment of denitrifying phosphorus removal microorganisms and achieved improved anaerobic P-release and anoxic P-uptake activities, which were beneficial to the denitrifying phosphorus removal activities and removal efficiencies. Due to high mixed liquor suspended solid and uneven distributed dissolved oxygen, 35% of total nitrogen was eliminated through simultaneous nitrification and denitrification process in aerobic zones. Moreover, 62 ± 6% of influent chemical oxygen demands was involved in the denitrification or phosphorus release processes.     

Simultaneous nitrification and denitrification with different mixed nitrogen loads by a hypothermia aerobic bacterium

Microorganism with simultaneous nitrification and denitrification ability plays a significant role in nitrogen removal process, especially in the eutrophic waters with excessive nitrogen loads. The nitrogen removal capacity of microorganism may suffer from low temperature or nitrite nitrogen source. In this study, a hypothermia aerobic nitrite-denitrifying bacterium, Pseudomonas tolaasii strain Y-11, was selected to determine the simultaneous nitrification and denitrification ability with mixed nitrogen source at 15 °C. The sole nitrogen removal efficiencies of strain Y-11 in simulated wastewater were obtained. After 24 h of incubation at 15 °C, the ammonium nitrogen fell below the detection limit from an initial value of 10.99 mg/L. Approximately 88.0 ± 0.33% of nitrate nitrogen was removed with the initial concentration of 11.78 mg/L and the nitrite nitrogen was not detected with the initial concentration of 10.75 mg/L after 48 h of incubation at 15 °C. Additionally, the simultaneous nitrification and denitrification nitrogen removal ability of P. tolaasii strain Y-11 was evaluated using low concentration of mixed NH₄⁺-N and NO₃^?–N/NO₂^?–N (about 5 mg/L-N each) and high concentration of mixed NH₄⁺–N and NO₃^?–N/NO₂^?–N (about 100 mg/L-N each). There was no nitrite nitrogen accumulation at the time of evaluation. The results demonstrated that P. tolaasii strain Y-11 had higher simultaneous nitrification and denitrification capacity with low concentration of mixed inorganic nitrogen sources and may be applied in low temperature wastewater treatment.     

Air-lift internal loop biofilm reactor for realized simultaneous nitrification and denitrification

Simultaneous nitrification and denitrification (SND) was realized by means of a novel air-lift internal loop biofilm reactor, in which aeration was set in middle of the reactor. During operation, the aeration was adjusted to get appropriate dissolve oxygen (DO) in bulk solution and let aerobic and anoxic zone coexist in one reactor. When aeration was at 0.6 and 0.2 L/min, corresponding to DO of 5.8 and 2.5 mg/L in bulk solution, ammonia nitrogen removal percentage reached about 80 and 90 %, but total nitrogen removal percentage was lower than 25 %. While the aeration was reduced to 0.1 L/min, aerobic and anoxic zones existed simultaneously in one reactor to get 75 % of ammonia nitrogen and 50 % of total nitrogen removal percentage. Biofilms were, respectively, taken from aerobic and anoxic zone to verify their function of nitrification and denitrification in two flasks, in which ammonia nitrogen was transferred into nitrate completely by aerobic biofilm, and nitrate was removed more than 80 % by anoxic biofilm. Microelectrode was used to measure the DO distribution inside biofilms in anoxic zone corresponding to different aerations. When aeration was at 0.6 and 0.2 L/min, DO inside biofilm was more than 1.5 mg/L, but the DO inside biofilm decreased to anoxic status with depth of biofilm increasing corresponding to aeration of 0.1 L/min. The experimental results indicated that SND could be realized because of simultaneous existence of aerobic and anoxic biofilms in one reactor.     

The magic-bead concept: an integrated approach to nitrogen removal with co-immobilized micro-organisms

This paper describes both qualitative and quantitative aspects of simultaneous autotrophic nitrification and heterotrophic denitrification by, respectively, the nitrifierNitrisomonas europaea and either of the denitrifiersPseudomonas denitrificans orParacoccus denitrificans co-immobilized in double-layer gel beads. The system is based on the establishment of well-defined oxic and anoxic zones within the cell supports and on physical separation of the nitrifying and denitrifying populations. Nitrification and denitrification rates were obtained from measured bulk concentrations and head-space analysis. The latter analyses showed that ammonia was primarily converted into molecular nitrogen. Nitrous oxide was not detected. High nitrogen removal rates (up to 5.1 mmol N m^–3 gel s^–1) were achieved in continuous reactors under aerobic conditions. The overall rate of nitrogen removal was controlled by the nitrifying step. The approach followed is, in principle, also suitable to the coupling of other oxidative and reductive bioprocesses having complementary metabolic routes. Two-stage bioconversion processes can be thus conducted as if single-staged, which results in more compact reactor systems.     

Kinetic Modeling for Simultaneous Organic Carbon Oxidation,Nitrification, and Denitrification of Abattoir Wastewater in Sequencing Batch Reactor

A laboratory-scale study was conducted in a 20.0-L sequencing batch reactor (SBR) to explore the feasibility of simultaneous removal of organic carbon and nitrogen from abattoir wastewater. The reactor was operated under three different combinations of aerobic-anoxic sequence, viz., (4+4), (5+3), and (5+4) h of total react period, with influent soluble chemical oxygen demand (SCOD) and ammonia nitrogen (NH₄⁺-N) level of 2200 ± 50 and 125 ± 5 mg L^?1, respectively. In (5+4) h cycle, a maximum 90.27% of ammonia reduction corresponding to initial NH₄⁺-N value of 122.25 mg L^?1 and 91.36% of organic carbon removal corresponding to initial SCOD value of 2215.25 mg L^?1 have been achieved, respectively. The biokinetic parameters such as yield coefficient (Y), endogenous decay constant (k_d), and half-velocity constant (K_s) were also determined to improve the design and operation of package effluent treatment plants comprising SBR units. The specific denitrification rate (q_DN) during anoxic condition was estimated as 6.135 mg N/g mixed liquor volatile suspended solid (MLVSS)·h on 4-h average contact period. The value of Y, k_d and K_s for carbon oxidation and nitrification were found to be in the range of 0.6225–0.6952 mg VSS/mg SCOD, 0.0481–0.0588 day^?1, and 306.56–320.51 mg L^?1, and 0.2461–0.2541 mg VSS/mg NH₄⁺-N, 0.0324–0.0565 day^?1, and 38.28–50.08 mg L^?1, respectively, for different combinations of react periods.     

A new method of autotrophic denitrification with spent sulfidic caustic as substrate and alkalinity source

A new method based on sulfide utilizing autotrophic denitrification was adopted to remove nitrate from wastewater and to reuse spent sulfidic caustic containing high sulfide and alkalinity levels. The experiments were performed using a bench-scale upflow anoxic hybrid growth reactor (UAHGR) and an upflow anoxic suspended growth reactor (UASGR) to characterize the stoichiometric relationship between sulfur and nitrate in the process as well as the performance of the reactors. The level of nitrate removal from the UAHGR and UASGR were maintained at over 90% at a nitrate loading rate ranging from 0.15∼0.40 kgNO₃ ⁻/m³·d and no significant nitrite accumulation was observed in either reactor. Although the influent pH values were higher than the optimum range of autotrophic denitrification at 8.7∼10.1, the effluent pH was stable at 7.2∼7.9 due to the production of hydrogen ions during operation. The stoichiometric ratio of sulfate production to nitrate removal was 1.5∼2.1 mgSO₄ ²⁻/mgNO₃ ⁻ in both reactors. A comparison of the reactor performance revealed that the chemical parameters of the UAHGR operation corresponded to a plug flow like type reactor while the chemical parameters of the UASGR operation corresponded to a completely stirred tank reactor like type reactor. UAHGR did not require sludge recycling due to the packed media while UASGR required 300∼700% sludge recycling. Therefore, spent sulfidic caustic could be used in the sulfur utilizing autotrophic denitrification processes as substrate and alkalinity sources.     

Enhanced COD and nitrogen removals for the treatment of swine wastewater by combining submerged membrane bioreactor (MBR) and anaerobic upflow bed filter (AUBF) reactor

In order to enhance performances of organics removal and nitrification for the treatment of swine wastewater containing high concentration of organic solids and nitrogen than conventional biological nitrogen removal process, a submerged membrane bioreactor (MBR) was followed by an anaerobic upflow bed filter (AUBF) reactor in this research (AUBF–MBR process). The AUBF reactor is a hybrid reactor, which is the combination of an anoxic filter for denitrification and upflow anaerobic sludge blanket (UASB) for acid fermentation. In the AUBF–MBR process, it showed a considerable enhancement of the effluent quality in terms of COD removal and nitrification. The submerged MBR could maintain more than 14,000 mg VSS/L of the biomass concentration. Total nitrogen (T-N) removal efficiency represented 60% when internal recycle ratio was three times of flow-rate (Q), although the nitrification occurred completely. Although the volatile fatty acids produced in AUBF reactor can enhance denitrification rate, but the AUBF–MBR process showed reduction of overall removal efficiency of the nitrogen due to the reduction of carbon source by methane production in the AUBF reactor compared to that of theoretical nitrogen removal efficiency.

Long-term operation of the submerged MBR showed that the throughputs of the submerged MBR were respectively 74, 63, and 31 days at 10, 15, and 30 L/m² h (LMH) of permeate flux. Resistance to filtration by rejected solid is the primary cause of fouling, however the priority of cake resistance (R_c) and fouling resistance (R_f) with respect to filtration phenomenon was different according to the amount of permeate flux. The submerged MBR, here, achieved a steady-state flux of 15 LMH at 0.4 atm. of trans-membrane pressure (TMP) but the flux can be enhanced in the future because shear force by tangential flow will be greater when multi-layer sheets of membrane were used.     

Test of Porous Ceramic Material for the Immobilisation of Predominant Nitrifying Bacteria and for the Improvement of the AAO Process

The efficiency of nitrification in a fixed bed reactor was compared to that found in an activated sludge reactor to determine their sensitivity to changing loads and lower temperatures. Two structurally identical lab‐scale systems, using the anaerobic/anoxic/aerobic (AAO) process to remove nitrogen and phosphorus simultaneously, were operated in parallel with secondary clarifiers and sludge return. The first aerobic system was operated as an activated sludge reactor, the second system as a fixed bed reactor. The aerobic fixed bed reactor was filled with porous ceramic materials for the immobilisation of predominantly nitrifying bacteria. The removal efficiencies of 99 % NH₄⁺‐N, 90 % DOC, and 98 % PO₄^3–‐P for normal loads of 0.11 g/L d DOC, 0.06 g/L d NH₄⁺‐N, and 0.0054 g/L d PO₄^3–‐P were achieved for both systems. However, the system with an aerobic fixed bed reactor was characterised by the following advantages over the system with an activated sludge reactor: a shorter time to reach almost complete nitrification, a higher nitrification rate at higher loads of NH₄⁺‐N and a lower sensitivity of nitrification at lower temperatures down to 12 °C.     

Simultaneous nitrification-denitrification achieved by an innovative internal-loop airlift MBR: comparative study

This study assessed the performance of different single-stage continuous aerated submerged membrane bioreactors (MBR) for nitrogen removal. Almost complete nitrification was achieved in each MBR irrespective of operating mode and biomass system. Denitrification was found to be the rate-limiting step for total nitrogen (T-N) removal. The MBR with internal-loop airlift reactor (ALR) configuration performed better as regards T-N removal compared with continuous stirred-tank reactor (CSTR). It was demonstrated that simultaneous nitrification and denitrification (SND) is the mechanism leading to nitrogen removal and the contribution of microenvironment on SND is more remarkable for the MBRs with hybrid biomass. Macroenvironment analyses showed that gradient distribution of dissolved oxygen (DO) level in airlift MBRs imposed a significant effect on SND. Higher mixed liquor suspended solid (MLSS) concentration led to the improvement in T-N removal by enhancing anoxic microenvironment. Apparent nitrite accumulation coupled with higher nitrogen reduction was accomplished at MLSS concentration exceeded 12.6 g/L.     

Improved simultaneous nitrification and denitrification in a single reactor by using two different immobilization carriers with specific oxygen transfer characteristics

To maximize nitrogen utilization rates during nitrification and denitrification in a simultaneous reaction for direct nitrogen removal from ammonia–nitrogen in a single reactor, two different carriers were applied that immobilized nitrifiers and denitrifiers separately. With the optimized DO concentration and mixing ratio of immobilization carriers, ammonium–nitrogen was successfully removed as designed until the middle phase of treatment where nitrogen removal rate was higher than 83% of the theoretical value, although an imbalance between nitrification and denitrification occurred at a later phase of treatment where residual nitrate–nitrogen concentration was less than 2 mg/l. The new approach using two different carriers to immobilize nitrifiers and denitrifiers separately was proved useful for controlling both nitrification and denitrification rates, enabling the utilization of maximum treatment ability of both nitrifiers and denitrifiers in a single reactor for direct nitrogen removal from ammonium–nitrogen.     

Challenges for simultaneous nitrification, denitrification, and phosphorus removal in microbial aggregates: mass transfer limitation and nitrous oxide production

The microbial community composition and activity was investigated in aggregates from a lab-scale bioreactor, in which nitrification, denitrification and phosphorus removal occurred simultaneously. The biomass was highly enriched for polyphosphate accumulating organisms facilitating complete removal of phosphorus from the bulk liquid; however, some inorganic nitrogen still remained at the end of the reactor cycle. This was ascribed to incomplete coupling of nitrification and denitrification causing NO(3)(-) accumulation. After 2 h of aeration, denitrification was dependent on the activity of nitrifying bacteria facilitating the formation of anoxic zones in the aggregates; hence, denitrification could not occur without simultaneous nitrification towards the end of the reactor cycle. Nitrous oxide was identified as a product of denitrification, when based on stored PHA as carbon source. This observation is of critical importance to the outlook of applying PHA-driven denitrification in activated sludge processes.     

An investigation of a process for partial nitrification and autotrophic denitrification combined desulfurization in a single biofilm reactor

In this study, a vertical submerged biofilm reactor was applied to investigate autotrophic partial nitrification/denitrification and simultaneous sulfide removal by using synthetic wastewater. The appropriate influent ratios of ammonia and sulfide needed to achieve partial autotrophic nitrification and denitrification were evaluated with influent ammonium nitrogen ranging from 54.6 to 129.8 mg L^?1 and sulfide concentrations ranging from 52.7 to 412.4 mg S L^?1. The results demonstrated that the working parameter was more stable when the sulfur/nitrogen ratio was set at 3:2, which yielded the maximum sulfur conversion. Batch experiments with different phosphate concentrations proved that a suitable phosphate buffer solution to control pH values could improve synchronous desulfurization denitrification process performance.     

Simultaneous nitrogen and carbon removal in a packed A/O reactor: effect of C/N ratio on microbial community structure

In this research, a novel packed anoxic/oxic moving bed biofilm reactor (MBBR) was established to achieve high-organic matter removal rates, despite the carbon/nitrogen (C/N) ratio of 2.7–5.1 in the influent. Simultaneous nitrification–denitrification (SND) was investigated under a long sludge retention time of 104 days. The system exhibited excellent performance in pollutant removal, with chemical oxygen demand and total nitrogen (TN) enhanced to 93.6–97.4% and 34.4–60%, respectively. Under low C/N conditions, the nitrogen removal process of A/O MBBR system was mainly achieved by anaerobic denitrification. The increase of C/N ratio enhanced SND rate of the aerobic section, where dissolved oxygen was maintained at the range of 4–6 mg/L, and resulted in higher TN removal efficiency. The microbial composition and structures were analyzed utilizing the MiSeq Illumina sequencing technique. High-throughput pyrosequencing results indicated that the dominant microorganisms were Proteobacteria and Bacteroidetes at the phylum level, which contributes to the removal of organics matters. In the aerobic section, abundances of Nitrospirae (1.12–29.33%), Burkholderiales (2.15–21.38%), and Sphingobacteriales (2.92–11.67%) rose with increasing C/N ratio in the influent, this proved that SND did occur in the aerobic zone. As the C/N ratio of influent increased, the SND phenomenon in the aerobic zone of the system is the main mechanism for greatly improving the removal rate of TN in the aerobic section. The C/N ratio in the aerobic zone is not required to be high to exhibit good TN removal performance. When C/NH₄⁺ and C/TN in the aerobic zone were higher than 2.29 and 1.77, respectively, TN removal efficiency was higher than 60%, which means that carbon sources added to the reactor could be saved. This study would be vital for a better understanding of microbial structures within a packed A/O MBBR and the development of cost-efficient strategies for the treatment of low C/N wastewater.

     

Biological treatment of low-salinity shrimp aquaculture wastewater using sequencing batch reactor

In order to improve the water quality in shrimp aquaculture operated under low-salinity conditions, a sequencing batch reactor (SBR) was tested for treatment of the wastewater. This water from the backwash of a single-bead filter from the Waddell Mariculture Center, South Carolina, contained high concentrations of carbon and nitrogen and was successfully treated using the SBR. By operating the reactor sequentially in aerobic, anoxic and aerobic modes, nitrification and denitrification were achieved, as well as removal of carbon. Specifically, the initial chemical oxygen demand (COD) concentration of 1201 mg l⁻¹ was reduced to 32 mg l⁻¹ within 8 days of reactor operation. Ammonia in the sludge was nitrified within 3 days. The denitrification of nitrate was achieved by the anoxic process and total removal of nitrate was observed.     

Simultaneous nitrification and denitrification in a mixed methanotrophic culture

Simultaneous nitrification and denitrification using a mixed methanotrophic culture was investigated. When both NO₃ ^–-N (108 mg l^–1) and NH₃-N (59 mg l^–1) were added into batch reactors, nitrate removal was complete within 10 h at the rate of 47 mg NO₃ ^–-N g VSS^–1 day^–1 when dissolved oxygen (DO) concentration was maintained at 2 mg DO l^–1. Ammonia removal started simultaneously with nitrate removal at a slower rate of 14 NH₃-N g VSS^–1 day^–1. No significant accumulation of nitrite or nitrate during ammonia utilization suggested the occurrence of simultaneous nitrification and denitrification.     

Nitrogen removal performance in a novel combined biofilm reactor

Experiments have been performed to investigate the nitrogen removal performance in a novel combined biofilm reactor using synthetic wastewater. In the reactor, one cubic box was separated by two baffles into three zones: aerobic zone, buffering zone and anoxic zone. Nitrification and denitrification were supposed to be mainly accomplished in the aerobic and anoxic zones, respectively. When the influent total nitrogen (TN) and organic carbon loadings were averaged at 0.093 and 0.40 kg/m³/d, 84% TN removal efficiency was achieved by adjusting the aeration rate and the configuration of the reactor. Continuous experimental results demonstrated that NH₃-N removal efficiency increased by adjusting the clapboards of the reactor at a certain aeration rate. Energy produced by aeration was used for liquid recycle, so TN could be more efficiently removed at lower cost in this reactor.