Rapid double 8-nm steps by a kinesin mutant

The mechanism by which conventional kinesin walks along microtubules is poorly understood, but may involve alternate binding to the microtubule and hydrolysis of ATP by the two heads. Here we report a single amino-acid change that affects stepping by the motor. Under low force or low ATP concentration, the motor moves by successive 8-nm steps in single-motor laser-trap assays, indicating that the mutation does not alter the basic mechanism of kinesin walking. Remarkably, under high force, the mutant motor takes successive 16-nm displacements that can be resolved into rapid double 8-nm steps with a short dwell between steps, followed by a longer dwell. The alternating short and long dwells under high force demonstrate that the motor stepping mechanism is inherently asymmetric, revealing an asymmetric phase in the kinesin walking cycle. Our findings support an asymmetric two-headed walking model for kinesin, with cooperative interactions between the two heads. The sensitivity of the 16-nm displacements to nucleotide and load raises the possibility that ADP release is a force-producing event of the kinesin cycle.     

驱动蛋白结构与运动机制

驱动蛋白是一类能够利用ATP水解释放的化学能驱动其所携带的“货物”分子沿着微管（microtubule,MT）定向运动的分子马达,在细胞器运输、有丝分裂、轴突运输等方面有着重要的生理作用。随着驱动蛋白结合ADP、ATP和未结合核苷酸（APO）三种特征状态的晶体结构的解析,驱动蛋白构象变化的研究得到了进一步发展,而在力产生机制和运动模型方面仍然存在较大争议。本文以kinesin-1家族为例,分析了驱动蛋白三种特征状态结构的特点、状态结构间的构象转变,论述了驱动蛋白的力产生机制和整个迈步过程。并探讨了驱动蛋白的运动模型,同时采用分子动力学模拟比较了驱动蛋白的两种迈步方式,为深入研究驱动蛋白提供了一定的理论计算。最后,基于本课题组对复杂体系的研究,对驱动蛋白体系的控制机制提出了新的假设,并对未来的研究方向进行了展望。     

Asymmetry in kinesin walking

Several lines of experimental evidence suggest that the conventional kinesin 1 walks by an asymmetric hand-over-hand mechanism, although it is a homodimer. In the previous study, we examined several important force-dependent features of the hand-over-hand mechanism of kinesin. In this study, we focus on the asymmetry in the hand-over-hand mechanism. We show that the experimentally observed kinesin limping can be explained in our model by the variation of the neck linker lengths in the kinesin stepping (which has also been suggested earlier by others). We also study the experimentally observed processive motion of a mutant heterodimer of kinesin, in which only one of the two heads has the capability of ATP hydrolysis, as well as the walking of wild-type kinesin in the presence of both ATP and its analogue AMPPNP. We show that the possible processive walking of the heterodimeric kinesin can be explained by introducing a force-generating intermediate, the kinesin-ATP complex, which is different from the posthydrolytic species, kinesin-ADP/Pi.     

Coupled chemical and mechanical reaction steps in a processive Neurospora kinesin.

We show using single molecule optical trapping and transient kinetics that the unusually fast Neurospora kinesin is mechanically processive, and we investigate the coupling between ATP turnover and the mechanical actions of the motor. Beads carrying single two-headed Neurospora kinesin molecules move in discrete 8 nm steps, and stall at approximately 5 pN of retroactive force. Using microtubule-activated release of the fluorescent analogue 2'-(3')-O-(N-methylanthraniloyl) adenosine 5'-diphosphate (mantADP) to report microtubule binding, we found that initially only one of the two motor heads binds, and that the binding of the other requires a nucleotide 'chase'. mantADP was released from the second head at 4 s(-1) by an ADP chase, 5 s(-1) by 5'-adenylylimidodiphosphate (AMPPNP), 27 s(-1) by ATPgammaS and 60 s(-1) by ATP. We infer a coordination mechanism for molecular walking, in which ATP hydrolysis on the trailing head accelerates leading head binding at least 15-fold, and leading head binding then accelerates trailing head unbinding at least 6-fold.     

Use of Stopped-Flow Fluorescence and Labeled Nucleotides to Analyze the ATP Turnover Cycle of Kinesins

The kinesin superfamily of microtubule associated motor proteins share a characteristic motor domain which both hydrolyses ATP and binds microtubules. Kinesins display differences across the superfamily both in ATP turnover and in microtubule interaction. These differences tailor specific kinesins to various functions such as cargo transport, microtubule sliding, microtubule depolymerization and microtubule stabilization. To understand the mechanism of action of a kinesin it is important to understand how the chemical cycle of ATP turnover is coupled to the mechanical cycle of microtubule interaction. To dissect the ATP turnover cycle, one approach is to utilize fluorescently labeled nucleotides to visualize individual steps in the cycle. Determining the kinetics of each nucleotide transition in the ATP turnover cycle allows the rate-limiting step or steps for the complete cycle to be identified. For a kinesin, it is important to know the rate-limiting step, in the absence of microtubules, as this step is generally accelerated several thousand fold when the kinesin interacts with microtubules. The cycle in the absence of microtubules is then compared to that in the presence of microtubules to fully understand a kinesin’s ATP turnover cycle. The kinetics of individual nucleotide transitions are generally too fast to observe by manually mixing reactants, particularly in the presence of microtubules. A rapid mixing device, such as a stopped-flow fluorimeter, which allows kinetics to be observed on timescales of as little as a few milliseconds, can be used to monitor such transitions. Here, we describe protocols in which rapid mixing of reagents by stopped-flow is used in conjunction with fluorescently labeled nucleotides to dissect the ATP turnover cycle of a kinesin.     

The role of ATP hydrolysis for kinesin processivity

Conventional kinesin is a highly processive, plus-end-directed microtubule-based motor that drives membranous organelles toward the synapse in neurons. Although recent structural, biochemical, and mechanical measurements are beginning to converge into a common view of how kinesin converts the energy from ATP turnover into motion, it remains difficult to dissect experimentally the intermolecular domain cooperativity required for kinesin processivity. We report here our pre-steady-state kinetic analysis of a kinesin switch I mutant at Arg(210) (NXXSSRSH, residues 205-212 in Drosophila kinesin). The results show that the R210A substitution results in a dimeric kinesin that is defective for ATP hydrolysis and a motor that cannot detach from the microtubule although ATP binding and microtubule association occur. We propose a mechanistic model in which ATP binding at head 1 leads to the plus-end-directed motion of the neck linker to position head 2 forward at the next microtubule binding site. However, ATP hydrolysis is required at head 1 to lock head 2 onto the microtubule in a tight binding state before head 1 dissociation from the microtubule. This mechanism optimizes forward movement and processivity by ensuring that one motor domain is tightly bound to the microtubule before the second can detach.     

Lethal kinesin mutations reveal amino acids important for ATPase activation and structural coupling.

To study the relationship between conventional kinesin's structure and function, we identified 13 lethal mutations in the Drosophila kinesin heavy chain motor domain and tested a subset for effects on mechanochemistry. S246F is a moderate mutation that occurs in loop 11 between the ATP- and microtubule-binding sites. While ATP and microtubule binding appear normal, there is a 3-fold decrease in the rate of ATP turnover. This is consistent with the hypothesis that loop 11 provides a structural link that is important for the activation of ATP turnover by microtubule binding. T291M is a severe mutation that occurs in alpha-helix 5 near the center of the microtubule-binding surface. It impairs the microtubule-kinesin interaction and directly effects the ATP-binding pocket, allowing an increase in ATP turnover in the absence of microtubules. The T291M mutation may mimic the structure of a microtubule-bound, partially activated state. E164K is a moderate mutation that occurs at the beta-sheet 5a/loop 8b junction, remote from the ATP pocket. Surprisingly, it causes both tighter ATP-binding and a 2-fold decrease in ATP turnover. We propose that E164 forms an ionic bridge with alpha-helix 5 and speculate that it helps coordinate the alternating site catalysis of dimerized kinesin heavy chain motor domains.     

Nucleotide specificity of the enzymatic and motile activities of dynein, kinesin, and heavy meromyosin

The substrate specificities of dynein, kinesin, and myosin substrate turnover activity and cytoskeletal filament-driven translocation were examined using 15 ATP analogues. The dyneins were more selective in their substrate utilization than bovine brain kinesin or muscle heavy meromyosin, and even different types of dyneins, such as 14S and 22S dynein from Tetrahymena cilia and the beta-heavy chain-containing particle from the outer-arm dynein of sea urchin flagella, could be distinguished by their substrate specificities. Although bovine brain kinesin and muscle heavy meromyosin both exhibited broad substrate specificities, kinesin-induced microtubule translocation varied over a 50-fold range in speed among the various substrates, whereas heavy meromyosin-induced actin translocation varied only by fourfold. With both kinesin and heavy meromyosin, the relative velocities of filament translocation did not correlate well with the relative filament-activated substrate turnover rates. Furthermore, some ATP analogues that did not support the filament translocation exhibited filament-activated substrate turnover rates. Filament-activated substrate turnover and power production, therefore, appear to become uncoupled with certain substrates. In conclusion, the substrate specificities and coupling to motility are distinct for different types of molecular motor proteins. Such nucleotide "fingerprints" of enzymatic activities of motor proteins may prove useful as a tool for identifying what type of motor is involved in powering a motility-related event that can be reconstituted in vitro.     

Direct long-term observation of kinesin processivity at low load

The hand-over-hand stepping mechanism of kinesin at low loads is inadequately understood because the number of molecular steps taken per encounter with the microtubule is difficult to measure: optical traps do not register steps at zero load, while evanescent wave microscopy of single molecules of GFP-kinesin suffers from premature photobleaching. Obtaining low-load data is important because it can efficiently distinguish between alternative proposed mechanisms for molecular walking. We report a novel experiment that records the missing data. We fused kinesin to gelsolin, creating a construct that severs and caps rhodamine-phalloidin actin filaments, setting exactly one kinesin molecule on one end of each fluorescent actin filament. Single kinesin molecules labeled in this way can be tracked easily and definitively using a standard epifluorescence microscope. We use the new system to show that, contrary to a recent report, kinesin run length at low load is independent of ATP concentration in the muM to mM range of ATP concentration. Adding competitor ADP in the presence of saturating ATP decreases both velocity and run length. Based on these data, we propose a simplified model for the mechanism of processive stepping.     

The kinesin-13 MCAK has an unconventional ATPase cycle adapted for microtubule depolymerization

Unlike other kinesins, members of the kinesin-13 subfamily do not move directionally along microtubules but, instead, depolymerize them. To understand how kinesins with structurally similar motor domains can have such dissimilar functions, we elucidated the ATP turnover cycle of the kinesin-13, MCAK. In contrast to translocating kinesins, ATP cleavage, rather than product release, is the rate-limiting step for ATP turnover by MCAK; unpolymerized tubulin and microtubules accelerate this step. Further, microtubule ends fully activate the ATPase by accelerating the exchange of ADP for ATP. This tuning of the cycle adapts MCAK for its depolymerization activity: lattice-stimulated ATP cleavage drives MCAK into a weakly bound nucleotide state that reaches microtubule ends by diffusion, and end-specific acceleration of nucleotide exchange drives MCAK into a strongly bound state that promotes depolymerization. This altered cycle accounts well for the different mechanical behaviour of this kinesin, which depolymerizes microtubules from their ends, compared to translocating kinesins that walk along microtubules. Thus, the kinesin motor domain is a nucleotide-dependent engine that can be differentially tuned for transport or depolymerization functions.     

The ATPase Cycle of the Mitotic Motor CENP-E

We have previously shown that the mitotic motor centrosome protein E (CENP-E) is capable of walking for more than 250 steps on its microtubule track without dissociating. We have examined the kinetics of this molecular motor to see if its enzymology explains this remarkable degree of processivity. We find that like the highly processive transport motor kinesin 1, the enzymatic cycle of CENP-E is characterized by rapid ATP binding, multiple enzymatic turnovers per diffusive encounter, and gating of nucleotide binding. These features endow CENP-E with a high duty cycle, a prerequisite for processivity. However, unlike kinesin 1, neck linker docking in CENP-E is slow, occurring at a rate closer to that for Eg5, a mitotic kinesin that takes only 5–10 steps per processive run. These results suggest that like kinesin 1, features outside of the catalytic domain of CENP-E may also play a role in regulating the processive behavior of this motor.     

Force generation in kinesin hinges on cover-neck bundle formation

In kinesin motors, a fundamental question concerns the mechanism by which ATP binding generates the force required for walking. Analysis of available structures combined with molecular dynamics simulations demonstrates that the conformational change of the neck linker involves the nine-residue-long N-terminal region, the cover strand, as an element that is essential for force generation. Upon ATP binding, it forms a beta sheet with the neck linker, the cover-neck bundle, which induces the forward motion of the neck linker, followed by a latch-type binding to the motor head. The estimated stall force and anisotropic response to external loads calculated from the model agree with force-clamp measurements. The proposed mechanism for force generation by the cover-neck bundle formation appears to apply to several kinesin families. It also elucidates the design principle of kinesin as the smallest known processive motor.     

Modeling motility of the kinesin dimer from molecular properties of individual monomers

Conventional kinesin is a homodimeric motor protein that unidirectionally transports organelles along filamentous microtubule (MT) by hydrolyzing ATP molecules. There remain two central questions in biophysical studies of kinesin: (1) the molecular physical mechanism by which the kinesin dimer, made of two sequentially identical monomers, selects a unique direction (MT plus end) for long-range transport and (2) the detailed mechanisms by which local molecular properties of individual monomers affect the motility properties of the dimer motor as a whole. On the basis of a previously proposed molecular physical model for the unidirectionality of kinesin, this study investigates the synergic motor performance of the dimer from well-defined molecular properties of individual monomers. During cargo transportation and also in single-molecule mechanical measurements, a load is often applied to the coiled-coil dimerization domain linking the two motor domains ("heads"). In this study, the share of load directly born by each head is calculated, allowing for an unambiguous estimation of load effects on the ATP turnover and random diffusion of individual heads. The results show that the load modulations of ATP turnover and head diffusion are both essential in determining the performance of the dimer under loads. It is found that the consecutive run length of the dimer critically depends upon a few pathways, leading to the detachment of individual heads from MT. Modifying rates for these detachment pathways changes the run length but not the velocity of the dimer, consistent with mutant experiments. The run length may increase with or without the ATP concentration, depending upon a single rate for pure mechanical detachment. This finding provides an explanation to a previous controversy concerning ATP dependence of the run length, and related quantitative predictions of this study can be tested by a future experiment. This study also finds that the experimental observations for assisting loads can be quantitatively explained by load-biased head diffusion. We thus conclude that the dimer motility under resisting as well as assisting loads is governed by essentially the same mechanisms.     

Understanding a molecular motor walking along a microtubule: an asymmetric Brownian motor driven by bubble formation with a focus on binding affinity

In recent years, many studies on a molecular motor have been conducted in the fields of biorheology and nanoengineering. The molecular motor is a molecule that converts the chemical energy obtained by ATP hydrolysis into mechanical energy. Explaining this mechanism is important for nanoengineering. A kinesin, which is a type of molecular motor, has the characteristics to move on a microtubule with hand-over-hand steps. The kinesin walking behaviour is explained by the ‘asymmetric Brownian ratchet model’. Previously, we had suggested that the walking mechanism was achieved by the bubble formation in a nanosized channel surrounded by hydrophobic atoms with the transition between the two states – bubble state and liquid state. However, the walking behaviour of the model motor was different from that of a single molecule measurement of a kinesin. In this study, we constructed a new motor system focused on the asymmetric binding affinity of a motor protein and performed a model simulation using the dissipative particle dynamics method. As a result, it was observed that hand-over-hand walking depends on the transition position ratio and the transition frequency coefficient. Moreover, the efficiency of the new motor system is higher than that of the previous motor systems. The new motor model can provide a simulation guide for the design of biomimetic nanomachines.     

Kinesin: walking, crawling or sliding along?

Kinesins are microtubule-based motor proteins that are involved in cargo transport and mitosis. They are called "motors" because they convert chemical energy to mechanical energy (i.e. force and motion). They use the energy of ATP hydrolysis for their enzymatic processes by walking on microtubules. However, the mechanism underlying their motion has been unclear. Recently, conventional kinesin, which was the first-identified member of the family, has been shown to walk by swapping its two heads in a "hand-over-hand" mechanism. There is also experimental evidence supporting an asymmetric walking of kinesin in which two identical heads of the motor take alternate slow and fast steps. Other cargo-carrier and mitotic kinesins remain uninvestigated and are of great interest to biophysicists.     

Limping of homodimeric kinesin motors

Conventional kinesin, a homodimeric motor protein that transports cargo in various cells, walks limpingly along microtubule. Here, based on our previously proposed partially coordinated hand-over-hand model, we present a new mechanism for the limping behaviors of both wild-type and mutant kinesin homodimers. The limping is caused by different vertical forces acting on the heads in two successive steps during the processive movement of the dimer. From the model, various theoretical results, such as the dependences of the mean dwell time and dwell time ratio on the coiled-coil length and on the external load as well as the effect of vertical force on velocity, are in good agreement with previous experimental results. We predict that a high degree of limping will correlate strongly with a high sensitivity of ATP turnover rate to upwards force.     

Kinesin and cytoplasmic dynein binding to brain microsomes.

Movement of cellular organelles in a directional manner along polar microtubules is driven by the motor proteins, kinesin and cytoplasmic dynein. The binding of these proteins to a microsomal fraction from embryonic chicken brain is investigated here. Both motors exhibit saturation binding to the vesicles, and proteolysis of vesicle membrane proteins abolishes binding. The maximal binding for kinesin is 12 +/- 1.7 and 43 +/- 2 pmol per mg of vesicle protein with or without 1 mM ATP, respectively. The maximal binding for cytoplasmic dynein is 55 +/- 3.8 and 73 +/- 3.7 pmol per mg of vesicle protein with or without ATP, respectively. These values correspond to 1-6 sites per vesicle of 100-nm diameter. The nonhydrolyzable ATP analog, adenyl-5'-yl imidodiphosphate (AMP-PNP), inhibited kinesin binding to vesicles but increased kinesin binding to microtubules. An antibody to the kinesin light chain also inhibited vesicle binding to kinesin. In the absence but not presence of ATP, competition between the two motors for binding was observed. We suggest that there are two distinguishable binding sites for kinesin and cytoplasmic dynein on these organelles in the presence of ATP and a shared site in the absence of ATP.     

Conformational change of the loop L5 in rice kinesin motor domain induced by nucleotide binding

Loop L5 of kinesin is located near the ATPase site, in common with kinesins of various animal species. The rice plant-specific kinesin K16 also has a corresponding loop that is slightly shorter than that of mouse brain kinesin. The present study was designed to monitor conformational changes in loop L5 during ATP hydrolysis. For this purpose, we introduced one reactive cysteine into the L5 of rice kinesin and modified it with fluorescent probes. The cysteine in L5 was labeled with a fluorescent probe 2-(4'(iodoacetamide) anilino-naphthalene-6-sulfonic acid sodium salt) [IAANS]. IAANS was incorporated into L5 at an almost equimolar ratio in the absence of nucleotides. In contrast, the incorporated amount was reduced to 0.62 and 0.32 mol IAANS/mol motor domain in the presence of ATP and ADP, respectively. Upon nucleotide addition, the fluorescent intensity of IAANS incorporated into L5 was significantly reduced to 63% and 51% for ATP and ADP, respectively. These results suggest that L5 of rice kinesin significantly changes its conformation during ATP hydrolysis.     

Strain through the neck linker ensures processive runs: a DNA‐kinesin hybrid nanomachine study

The motor protein kinesin has two heads and walks along microtubules processively using energy derived from ATP. However, how kinesin heads are coordinated to generate processive movement remains elusive. Here we created a hybrid nanomachine (DNA‐kinesin) using DNA as the skeletal structure and kinesin as the functional module. Single molecule imaging of DNA‐kinesin hybrid allowed us to evaluate the effects of both connect position of the heads (N, C‐terminal or Mid position) and sub‐nanometer changes in the distance between the two heads on motility. Our results show that although the native structure of kinesin is not essential for processive movement, it is the most efficient. Furthermore, forward bias by the power stroke of the neck linker, a 13‐amino‐acid chain positioned at the C‐terminus of the head, and internal strain applied to the rear of the head through the neck linker are crucial for the processive movement. Results also show that the internal strain coordinates both heads to prevent simultaneous detachment from the microtubules. Thus, the inter‐head coordination through the neck linker facilitates long‐distance walking.     

Importance of a flexible hinge near the motor domain in kinesin-driven motility.

Conventional kinesin is a molecular motor consisting of an N-terminal catalytic motor domain, an extended stalk and a small globular C-terminus. Whereas the structure and function of the catalytic motor domain has been investigated, little is known about the function of domains outside the globular head. A short coiled-coil region adjacent to the motor domain, termed the neck, is known to be important for dimerization and may be required for kinesin processivity. We now provide evidence that a helix-disrupting hinge region (hinge 1) that separates the neck from the first extended coiled-coil of the stalk plays an essential role in basic motor activity. A fast fungal kinesin from Syncephalastrum racemosum was used for these studies. Deletion, substitution by a coiled-coil and truncation of the hinge 1 region all reduce motor speed and uncouple ATP turnover from gliding velocity. Insertion of hinge 1 regions from two conventional kinesins, Nkin and DmKHC, fully restores motor activity, whereas insertion of putative flexible linkers of other proteins does not, suggesting that hinge 1 regions of conventional kinesins can functionally replace each other. We suggest that this region is essential for kinesin movement in its promotion of chemo-mechanical coupling of the two heads and therefore the functional motor domain should be redefined to include not only the catalytic head but also the adjacent neck and hinge 1 domains.