Nisin Adsorption in Colloidal Systems Formed with Phytoglycogen Octenyl Succinate

While antimicrobial compounds are often used against food pathogens, they are liable to quick degradations in foods. One way to achieve their sustained efficacy is through the use of protective delivery systems. The overall goal of this study was to understand the interactions between nisin, an antimicrobial peptide, and phytoglycogen octenyl succinate (PG-OS), a dendrimer-like amphiphilic carbohydrate polymer in aqueous (non-emulsion) and emulsion based colloidal systems. Nisin interacts with PG-OS particulates following a Langmuir monolayer adsorption pattern in both systems. The monolayer adsorption capacity (Q_m) ranged from 37.6 to 106.4 μg/mL in non-emulsion, and was 181.8 μg/mL in PG-OS stabilized emulsion. At the same doses of PG-OS (5.0 mg/mL) and nisin (200 μg/mL), the concentration of adsorbed nisin in emulsion and non-emulsion were 157 and 22 μg/mL, respectively. This study showed that both the chemical nature and physical distribution of PG-OS particulates would affect nisin adsorption, which may provide a method for designing carbohydrate colloidal systems to achieve effective protection of antimicrobial compounds for foods.     

Comparative effectiveness of nisin and bacteriocin J46 at different pH values

E. HUOT, C. BARRENA-GONZALEZ AND H. PETITDEMANGE. 1996. A Comparative study of the inhibitory activity of nisin, the well-known lantibiotic produced by certain strains of Lactococcus lactis subsp. lactis , and of the bacteriocin produced by L. lactis subsp. cremoris J46, a strain previously isolated from fermented milk, was conducted. For both bacteriocins, the activity against L. lactis subsp. cremoris decreased with increasing pH. In addition, the bacteriocin preparations were more stable at 4 than at 20°C. The influence of the storage temperature was more crucial for nisin. Essentially the same activity was observed for bacteriocin J46 stored for 3 h at 4 or 20°C. More interesting was the observed stability of bacteriocin J46 at pH values between 5.8 and 6.8. For example, about 23% of nisin activity was lost at pH 6.4 whereas no loss of bacteriocin J46 activity was observed.     

Mechanism of Nisin, Pediocin 34, and Enterocin FH99 Resistance in Listeria monocytogenes

Nisin-, pediocin 34-, and enterocin FH99-resistant variants of Listeria monocytogenes ATCC 53135 were developed. In an attempt to clarify the possible mechanisms underlying bacteriocin resistance in L. monocytogenes ATCC 53135, sensitivity of the resistant strains of L. monocytogenes ATCC 53135 to nisin, pediocin 34, and enterocin FH99 in the absence and presence of different divalent cations was assessed, and the results showed that the addition of divalent cations significantly reduced the inhibitory activity of nisin, pediocin 34, and enterocin FH99 against resistant variants of L. monocytogenes ATCC 53135. The addition of EDTA, however, restored this activity suggesting that the divalent cations seem to affect the initial electrostatic interaction between the positively charged bacteriocin and the negatively charged phospholipids of the membrane. Nisin-, pediocin 34-, and enterocin-resistant variants of L. monocytogenes ATCC 53135 were more resistant to lysozyme as compared to the wild-type strain both in the presence as well as absence of nisin, pediocin 34, and enterocin FH99. Ultra structural profiles of bacteriocin-sensitive L. monocytogenes and its bacteriocin-resistant counterparts revealed that the cells of wild-type strain of L. monocytogenes were maximally in pairs or short chains, whereas, its nisin-, pediocin 34-, and enterocin FH99-resistant variants tend to form aggregates. Results indicated that without a cell wall, the acquired nisin, pediocin 34, and enterocin FH99 resistance of the variants was lost. Although the bacteriocin-resistant variants appeared to lose their acquired resistance toward nisin, pediocin 34, and enterocin FH99, the protoplasts of the resistant variants appeared to be more resistant to bacteriocins than the protoplasts of their wild-type counterparts.     

Bioengineered Nisin A Derivatives with Enhanced Activity against Both Gram Positive and Gram Negative Pathogens

Nisin is a bacteriocin widely utilized in more than 50 countries as a safe and natural antibacterial food preservative. It is the most extensively studied bacteriocin, having undergone decades of bioengineering with a view to improving function and physicochemical properties. The discovery of novel nisin variants with enhanced activity against clinical and foodborne pathogens has recently been described. We screened a randomized bank of nisin A producers and identified a variant with a serine to glycine change at position 29 (S29G), with enhanced efficacy against S. aureus SA113. Using a site-saturation mutagenesis approach we generated three more derivatives (S29A, S29D and S29E) with enhanced activity against a range of Gram positive drug resistant clinical, veterinary and food pathogens. In addition, a number of the nisin S29 derivatives displayed superior antimicrobial activity to nisin A when assessed against a range of Gram negative food-associated pathogens, including E. coli, Salmonella enterica serovar Typhimurium and Cronobacter sakazakii. This is the first report of derivatives of nisin, or indeed any lantibiotic, with enhanced antimicrobial activity against both Gram positive and Gram negative bacteria.     

Production of a nisin-like bacteriocin by Lactococcus lactis subsp. lactis A164 isolated from Kimchi

Lactococcus lactis subsp. lactis A164 was isolated from Kimchi (Korean traditional fermented vegetables). The bacteriocin produced by strain A164 was active against closely related lactic acid bacteria and some food-borne pathogens including Staphylococcus aureus, Listeria monocytogenes and Salmonella typhimurium. The antimicrobial spectrum was nearly identical to that of nisin. Bacteriocin activity was not destroyed by exposure to elevated temperatures at low pH values, but the activity was lost at high pH values. This bacteriocin was inactivated by pronase E and alpha, beta-chymotrypsin, but not by trypsin, pepsin, and alpha-amylase. Cultures of L. lactis subsp. lactis A164 maintained at a constant pH of 6.0 exhibited maximum production of the bacteriocin. It was purified to homogeneity by ammonium sulphate precipitation, sequential ion exchange chromatography, and ultrafiltration. Tricine-SDS-PAGE of purified bacteriocin gave the same molecular weight of 3.5 kDa as that of nisin. The gene encoding this bacteriocin was amplified by PCR with nisin gene-specific primers and sequenced. It showed identical sequences to the nisin gene. These results indicate that bacteriocin produced by Lactococcus lactis A164 is a nisin-like bacteriocin.     

Efficacies of Nisin A and Nisin V Semipurified Preparations Alone and in Combination with Plant Essential Oils for Controlling Listeria monocytogenes

The food-borne pathogenic bacterium Listeria is known for relatively low morbidity and high mortality rates, reaching up to 25 to 30%. Listeria is a hardy organism, and its control in foods represents a significant challenge. Many naturally occurring compounds, including the bacteriocin nisin and a number of plant essential oils, have been widely studied and are reported to be effective as antimicrobial agents against spoilage and pathogenic microorganisms. The aim of this study was to investigate the ability of semipurified preparations (SPP) containing either nisin A or an enhanced bioengineered derivative, nisin V, alone and in combination with low concentrations of the essential oils thymol, carvacrol, and trans-cinnamaldehyde, to control Listeria monocytogenes in both laboratory media and model food systems. Combinations of nisin V-containing SPP (25 μg/ml) with thymol (0.02%), carvacrol (0.02%), or cinnamaldehyde (0.02%) produced a significantly longer lag phase than any of the essential oil-nisin A combinations. In addition, the log reduction in cell counts achieved by the nisin V-carvacrol or nisin V-cinnamaldehyde combinations was twice that of the equivalent nisin A-essential oil treatment. Significantly, this enhanced activity was validated in model food systems against L. monocytogenes strains of food origin. We conclude that the fermentate form of nisin V in combination with carvacrol and cinnamaldehyde offers significant advantages as a novel, natural, and effective means to enhance food safety by inhibiting food-borne pathogens such as L. monocytogenes.     

Inhibitory activity of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> LMG P-26358 against <Emphasis Type="Italic">Listeria innocua</Emphasis> when used as an adjunct starter in the manufacture of cheese

Lactobacillus plantarum LMG P-26358 isolated from a soft French artisanal cheese produces a potent class IIa bacteriocin with 100% homology to plantaricin 423 and bacteriocidal activity against Listeria innocua and Listeria monocytogenes. The bacteriocin was found to be highly stable at temperatures as high as 100°C and pH ranges from 1-10. While this relatively narrow spectrum bacteriocin also exhibited antimicrobial activity against species of enterococci, it did not inhibit dairy starters including lactococci and lactobacilli when tested by well diffusion assay (WDA). In order to test the suitability of Lb. plantarum LMG P-26358 as an anti-listerial adjunct with nisin-producing lactococci, laboratory-scale cheeses were manufactured. Results indicated that combining Lb. plantarum LMG P-26358 (at 108 colony forming units (cfu)/ml) with a nisin producer is an effective strategy to eliminate the biological indicator strain, L. innocua. Moreover, industrial-scale cheeses also demonstrated that Lb. plantarum LMG P-26358 was much more effective than the nisin producer alone for protection against the indicator. MALDI-TOF mass spectrometry confirmed the presence of plantaricin 423 and nisin in the appropriate cheeses over an 18 week ripening period. A spray-dried fermentate of Lb. plantarum LMG P-26358 also demonstrated potent anti-listerial activity in vitro using L. innocua. Overall, the results suggest that Lb. plantarum LMG P-26358 is a suitable adjunct for use with nisin-producing cultures to improve the safety and quality of dairy products.     

Adsorption of bacteriocins by ingestible silica compounds

Bacteriocins including nisin, pediocin PO2, brevicin 286 and piscicolin 126 were adsorbed from culture supernates by various food-grade porous silica anti-caking agents and the food colourant, titanium dioxide. All the porous silica (calcium silicate or silicon dioxide) materials showed substantial capacity in adsorbing bacteriocin activities from the culture supernate and biological activity was recovered in the adsorbents. In contrast, the food colourant titanium dioxide adsorbed most of the bacteriocin activity from the supernate, with minimal biological activity retained in the adsorbent. Experiments with piscicolin 126 showed that optimum adsorption could be achieved with Micro-Cel E within 30 min, independent of the supernate pH (2.0-10.0). Piscicolin activity of up to 5 × 10⁷ AU g^-1 of Micro-Cel E was obtained after adsorption from culture supernates and the adsorbed piscicolin demonstrated substantial biological activity against Listeria monocytogenes in both broth and a milk growth medium.     

Nisin-activated hydrophobic and hydrophilic surfaces: assessment of peptide adsorption and antibacterial activity against some food pathogens

An effective antimicrobial packaging or food contact surface should be able to kill or inhibit micro-organisms that cause food-borne illnesses. Setting up such systems, by nisin adsorption on hydrophilic and hydrophobic surfaces, is still a matter of debate. For this purpose, nisin was adsorbed on two types of low-density polyethylene: the hydrophobic native film and the hydrophilic acrylic acid-treated surface. The antibacterial activity was compared for those two films and it was highly dependent on the nature of the surface and the nisin-adsorbed amount. The hydrophilic surfaces presented higher antibacterial activity and higher amount of nisin than the hydrophobic surfaces. The effectiveness of the activated surfaces was assessed against Listeria innocua and the food pathogens Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. S. aureus was more sensitive than the three other test bacteria toward both nisin-functionalized films. Simulation tests to mimic refrigerated temperature showed that the films were effective at 20 and 4 °C with no significant difference between the two temperatures after 30 min of exposure to culture media.     

Bacteriocin-Producing Lactic Acid Bacteria Isolated from Mangrove Forests in Southern Thailand as Potential Bio-Control Agents: Purification and Characterization of Bacteriocin Produced by Lactococcus lactis subsp. lactis KT2W2L

The aim of this work was to purify and characterize the bacteriocin produced by Lactococcus lactis subsp. lactis KT2W2L previously isolated from mangrove forests in southern Thailand, in order to evaluate its potential as new food protective agent. The active peptide from the cell-free supernatant of this strain was purified in 4 steps: (1) precipitation with 70 % saturated ammonium sulfate, (2) elution on a reversed-phase cartridge using different concentrations of acetonitrile, (3) cation-exchange chromatography and (4) final purification by reversed-phase HPLC on a C₈ column. The molecular mass of 3,329.5254 Da of the purified bacteriocin, determined by mass spectrometry, is nearly identical to that of peptide nisin Z. The activity of the purified bacteriocin was unaffected by pH (2.0–10.0), thermostable but was sensitive to proteolytic enzymes. The bacteriocin activity was stable after 8 weeks of storage at ?20 °C and 7 weeks of storage at 4 °C, but decreased after 3 weeks of storage at 37 °C. It was stable when incubated for 1 month at 4 °C in 0–30 % NaCl. Inhibitory spectrum of this bacteriocin showed a wide range of activity against similar bacterial strains, food-spoilage and food-borne pathogens. L. lactis subsp. lactis KT2W2L was sensitive to kanamycin, penicillin and tetracycline but resistant to ampicillin, gentamicin and vancomycin. The fragment obtained after amplification of genomic DNA from L. lactis subsp. lactis KT2W2L, with specific primers for bacteriocin genes, presented 99 % homology to the nisin Z gene. PCR amplification demonstrated that L. lactis subsp. lactis KT2W2L does not harbor virulence genes cylA, cylB, efaAfs and esp. The bacteriocin and its producing strain may find application as bio-preservatives for reduction in food-spoilage and food-borne pathogens in food products.     

Identification of the lantibiotic nisin Q,a new natural nisin variant produced by Lactococcus lactis 61-14 isolated from a river in Japan

Lactococcus lactis 61-14 isolated from river water produced a bacteriocin active against a wide range of Gram-positive bacteria. N-terminal amino acid sequencing, mass spectral analysis of the purified bacteriocin, and genetic analysis using nisin-specific primers showed that the bacteriocin was a new natural nisin variant, termed nisin Q. Nisin Q and nisin A differ in four amino acids in the mature peptide and two in the leader sequence.     

Antibacterial Activity of Subtilosin Alone and Combined with Curcumin, Poly-Lysine and Zinc Lactate Against Listeria monocytogenes Strains

In this paper, the antibacterial effects of the Bacillus amyloliquefaciens-produced bacteriocin subtilosin, both alone and in combination with curcumin, ε-poly-l-lysine (poly-lysine), or zinc lactate, were examined against Listeria monocytogenes. Results indicated that subtilosin inhibits both of the studied bacterial strains, Scott A (wild-type, nisin sensitive) and NR30 (nisin resistant). However, L. monocytogenes Scott A was more sensitive to subtilosin and pure curcumin. In addition, subtilosin was more active at an acidic pH. Subtilosin in combination with encapsulated curcumin displayed partial synergy against L. monocytogenes ScottA. It also had synergistic activity against both L. monocytogenes Scott A and L. monocytogenes NR30 when combined with zinc lactate. Only an additive effect was observed for subtilosin when combined with non-encapsulated curcumin or poly-lysine against the mentioned strains. Thus, using the combination of subtilosin with curcumin, poly-lysine, or zinc lactate, a lower effective dose can be used to control L. monocytogenes infection. Our findings suggest that subtilosin could be used as alternative bacteriocin to nisin, providing an opportunity to use a novel natural and efficacious biopreservative against L. monocytogenes in food preservation. This is the first report on the effects of the combination of subtilosin with natural antimicrobials on L. monocytogenes.     

Nisin Production by Enterococcus hirae DF105Mi Isolated from Brazilian Goat Milk

The purpose of this study was to select the promising biopreservation bacteriocin producer strain from goat milk and characterize the expressed bacteriocin, related to its physiological and biochemical properties and specificity of operon encoding production and expression of antimicrobial peptide. Brazilian goat milk was used as the source for the selection of bacteriocin-producing lactic acid bacteria. One strain (DF105Mi) stood out for its strong activity against several Listeria monocytogenes strains. Selected strain was identified based on the biochemical and physiological characteristics and 16s rRNA analysis. The bacteriocin production and inhibitory spectrum of strain DF105Mi were studied, together with the evaluation of the effect of temperature, pH, and chemicals on bacteriocin stability and production, activity, and adsorption to target cells as well as to the cell surface of bacteriocin producers. Physiological and bio-molecular analyses based on targeting of different genes, parts of nisin operon were performed in order to investigate the hypothesis that the studied strain can produce and express nisin. Based on biochemical, physiological, and 16s rRNA analysis, the strain DF105Mi was classified as Enterococcus hirae. The selected strain produces a bacteriocin which is stable in a wide range of pH (2.0–12.0), temperature (up to 120 °C), presence of selected chemicals and presents adsorption affinity to different test organisms, process influenced by environmental conditions. Higher bacteriocin production by Ent. hirae DF105Mi was recorded during stationary growth phase, but only when the strain was cultured at 37 °C. The strain’s genetic analysis indicated presence of the genes coding for the production of the bacteriocin nisin. This result was confirmed by cross-checking the sensitivity of the produced strain to commercial nisin A. The strong anti-Listeria activity, bacteriocin adsorption, and stability of produced bacteriocin indicate that Ent. hirae DF105Mi presents a differentiated potential application for biopreservation of fermented dairy products.

     

Complete nisin A gene cluster from Lactococcus lactis M78 (HM219853) — obtaining the nucleic acid sequence and comparing it to other published nisin sequences

Nisin is an antimicrobial peptide produced by Lactococcus lactis. It has a long history of safe use, mainly in food production. This bacteriocin has been studied from many aspects of genetics, biosynthesis, immunity, regulation and mode of action. The strain Lac. lactis M78 has already been described in previous studies as a good nisin A producer with equally good potential to be used in food production. The main objective of the present study was to determine the complete nucleic acid sequence of the nisin A gene cluster from this strain. This is the first time that all 11 genes that form the nisin A gene cluster were sequenced. The obtained sequence (GenBank: HM219853) was compared to other known nucleic acid sequences of bacteriocin nisin. The results of the comparison showed certain differences in sequences that might influence the structure and function of proteins involved in nisin biosynthesis, immunity and regulation.     

Incorporation of nisin into a meat binding system to inhibit bacteria on beef surfaces

In two separate experiments, the bacteriocin, nisin, was incorporated into a commercially available meat binding system (Fibrimex^®) and applied to meat surfaces as a way of inhibiting the meat spoilage organism, Brochothrix thermosphacta during extended refrigerated storage. In experiment 1, pre-rigor lean beef carcass tissue (BCT) was inoculated with B. thermosphacta , left untreated (U), treated with 10 μg ml⁻¹ nisin (N), Fibrimex^® (F) or Fibrimex^® containing 10 μg ml⁻¹ nisin (FN), held aerobically at 4 °C for up to 7 d, and populations of B. thermosphacta and nisin activity determined. Experiment 2 determined the effects of the same treatments but on post-rigor, frozen and thawed lean BCT that was inoculated, vacuum-packaged, and stored at 4 °C for up to 14 d. In both experiments, N- and FN-treated tissues exhibited significantly lower populations of B. thermosphacta compared to U- and F-treated tissues, for the duration of refrigerated storage. Nisin activity was detected up to 7 d in N- and FN-treated samples from experiment 1. However, activity was detected only to days 0 and 2 in FN- and N-treated samples, respectively, from experiment 2. These studies indicate that the addition of a bacteriocin to a meat binding system and application to meat surfaces may be useful in reducing undesirable bacteria in restructured meat products.     

Pediocin SA-1, an antimicrobial peptide from Pediococcus acidilactici NRRL B5627: production conditions, purification and characterization

Fermentation broths of Pediococcus acidilactici NRRL B5627 exhibited a certain antimicrobial activity due to a bacteriocin produced during early growth and until the stationary phase of growth was reached (at optimum of 60% dissolved oxygen saturation). Its size was determined by electrospray ionization mass spectrometric analysis as 3.660 kDa. N-terminal sequencing showed that the bacteriocin had 19 amino acid residues in the order KYYGXNGVXTXGKHSXVDX. The purified bacteriocin is similar to pediocins isolated by various Pediococci and therefore, it belongs to the class IIa of bacteriocins and is thus designated pediocin SA-1. Sensitivity of the purified pediocin to various storage temperatures and enzyme treatments was examined. Purified pediocin SA-1 is heat stable for up to 60 min at 121 °C. Pediocin SA-1 is inhibitory to several food-borne pathogens and food spoilage bacteria. It appears to be significantly more effective against Listeria spp. compared to pediocin PD-1 produced by P. damnosus. The mode of action of the purified bacteriocin appears to be bactericidal.     

Structural analysis and characterization of lacticin Q, a novel bacteriocin belonging to a new family of unmodified bacteriocins of gram-positive bacteria

Lactococcus lactis QU 5 isolated from corn produces a novel bacteriocin, termed lacticin Q. By acetone precipitation, cation-exchange chromatography, and reverse-phase high-performance liquid chromatography, lacticin Q was purified from the culture supernatant of this organism, and its molecular mass was determined to be 5,926.50 Da by mass spectrometry. Subsequent analyses of amino acid and DNA sequences revealed that lacticin Q comprised 53 amino acid residues and that its N-terminal methionine residue was formylated. In contrast to most bacteriocins produced by gram-positive bacteria, lacticin Q had no N-terminal extensions such as leader or signal sequences. It showed 66% and 48% identity to AucA, a hypothetical protein from Corynebacterium jeikeium plasmid pA501, and aureocin A53, a bacteriocin from Staphylococcus aureus A53, respectively. The characteristics of lacticin Q were determined and compared to those of nisin A. Similar to nisin A, lacticin Q exhibited antibacterial activity against various gram-positive bacteria. Lacticin Q was very stable against heat treatment and changes in pH; in particular, it was stable at alkaline pH values, while nisin A was inactivated. Moreover, lacticin Q induced ATP efflux from a Listeria sp. strain in a shorter time and at a lower concentration than nisin A, indicating that the former affected indicator cells in a different manner from that of the latter. The results described here clarified the fact that lacticin Q belongs to a new family of class II bacteriocins and that it can be employed as an alternative to or in combination with nisin A.     

Identification and characteristics of nisin Z-producing Lactococcus lactis subsp. lactis isolated from Kimchi

We isolated bacteriocin-producing Lactococcus lactis subsp. lactis from Kimchi. The bacteriocin inhibited strains of Clostridium perfringens, C. difficile, Listeria monocytogenes, vancomycin-resistant Enterococcus, and one out of four methicillin-resistant Staphylococcus aureus strains, as well as some closely related lactic acid bacteria. In tricine-SDS-PAGE, the bacteriocin migrated with an apparent molecular weight of about 4 kDa to the same location as nisin A and crude nisin Z. The gene encoding this bacteriocin was found to be identical to that of nisin Z with direct PCR sequence methods. The inhibitory activity was stable against heat and pH, but it was lost at 100 degrees C for 1 h and at 121 degrees C for 15 min. The bacteriocin was inactivated by proteolytic enzymes, but was not affected by lysozyme, lipase, catalase, or beta-glucosidase. There were some differences in characteristics from those of nisins described previously.     

Production and characterization of anti-nisin Z monoclonal antibodies: suitability for distinguishing active from inactive forms through a competitive enzyme immunoassay

As a pre-requisite to monoclonal antibody development, an efficient purification strategy was devised that yielded 72 mg of nisin Z from 14.5 1 of Lactococcus lactis subsp. lactis biovar. diacetylactis UL 719 (L. diacetylactis UL719) culture in supplemented whey permeate. Specific monoclonal antibodies (mAbs) were produced in mice against the purified nisin Z using keyhole limpet hemocyanin as a carrier protein. These antibodies did not recognize nisin A, suggesting that the asparagine residue at position 27 is involved in antibody recognition to nisin Z. However, the high reactivity of mAbs against biologically inactive nisin Z degradation products, produced during storage of freeze-dried pure nisin Z at -70 degrees C, indicated that the dehydroalanine residue at position 5 (Dha5), required for biological activity, is not necessary in nisin Z recognition by the mAb. A competitive enzyme immunoassay (cEIA) using the specific anti-nisin Z mAb was developed and used for rapid and sensitive detection and quantification of nisin Z in fresh culture supernatant, milk and whey. Detection limits of 78 ng/ml in phosphate-buffered saline, 87 ng/ml in culture supernatant, 106 ng/ml in milk and 90.5 ng/ml in whey were obtained for this assay. The cEIA using specific mAbs can be used to quantify nisin Z in food products.     

Development of polythene films for food packaging activated with an antilisterial bacteriocin from Lactobacillus curvatus 32Y

AIMS: The aims of this work were to (i) use a bacteriocin produced by Lactobacillus curvatus 32Y active against Listeria monocytogenes to activate polythene films by different methods, (ii) implement a large-scale process for antilisterial polythene films production and (iii) verify the efficacy of the developed films in inhibiting the growth of L. monocytogenes during the storage of meat products. METHODS AND RESULTS: The film was made active by using the antilisterial bacteriocin 32Y by Lact. curvatus with three different procedures: soaking, spraying and coating. The antimicrobial activity of the activated films was tested in plate assays against the indicator strain L. monocytogenes V7. All the used procedures yielded active polythene films although the quality of the inhibition was different. The coating was therefore employed to develop active polythene films in an industrial plant. The antimicrobial activity of the industrially produced films was tested in experiments of food packaging involving pork steak and ground beef contaminated by L. monocytogenes V7 at roughly 10(3) CFU cm(-2) and gram respectively. The results of the challenge tests showed the highest antimicrobial activity after 24 h at 4 degrees C, with a decrease of about 1 log of the L. monocytogenes population. CONCLUSIONS: Antimicrobial packaging can play an important role in reducing the risk of pathogen development, as well as extending the shelf life of foods. SIGNIFICANCE AND IMPACT OF THE STUDY: Studies of new food-grade bacteriocins as preservatives and development of suitable systems of bacteriocin treatment of plastic films for food packaging are important issues in applied microbiology and biotechnology, both for implementing and improving effective hurdle technologies for a better preservation of food products.