STUDIES ON THE CROSS-STRIATION OF THE INDIRECT FLIGHT MYOFIBRILS OF THE BLOWFLY CALLIPHORA

1. The cross-striation in the indirect flight myofibrils of Calliphora has been studied by phase contrast and polarised light microscopy. The band pattern at rest-length has been determined in flies killed in osmium tetroxide vapour while their wings remained in the resting position. All other observations have been made on unfixed fibrils. Although length changes in situ are probably very slight (about 2 per cent), isolated fibrils, by treatment with crude muscle extract or with ATP, can be induced to elongate to 104 per cent rest-length, or to shorten by 8 per cent but no more. Over the range 98 to 104 per cent rest-length, experimentally induced length changes are reversible. The fibrils can also be stretched beyond 104 per cent rest-length, but the process is irreversible. During the course of glycerol extraction the fibrils elongate to 104 per cent rest-length. 2. The changes in band pattern observed over the range 104 to 92 per cent rest-length are qualitatively the same as the changes observed over a wider range (about 130 to 40 per cent rest-length) in the skeletal myofibrils of rabbits. The earlier stages of shortening appear to be effected by retraction of the I bands into the A bands where they fill up the H zones. No evidence has been found that any changes in band pattern are due to a migration of the A substance. 3. Two components of the sarcomere can be extracted from it and a third component remains behind. These three components, which have also been demonstrated in skeletal myofibrils of the rabbit, where they behave in the same way, are: (a) the A substance which does not change its position as the fibril changes its length, and which can be extracted by the same procedures as remove myosin (shown elsewhere to be the A substance) from rabbit fibrils; (b) a material which extends from the Z lines to the borders of the H zone and which moves inwards during contraction and outwards during elongation; it can capture rabbit myosin from solution and form with it a contractile system, and it is thought to be actin; (c) a "backbone" or stroma bearing Z and M lines. 4. Since all these features of the cross-striation are the same in the insect fibrils as in rabbit fibrils, it is considered very probable that the sarcomere is similarly organised in both types of muscle and contracts by essentially the same mechanism.     

Biochemical and structural studies of actomyosin-like proteins from non-muscle cells. Isolation and characterization of myosin from amoebae of Dictyostelium discoideum

A myosin-like protein was purified from amoebae of the cellular slime mold Dictyostelium discoideum. The purification utilized newly discovered solubility properties of actomyosin in sucrose. The amoebae were extracted with a 30% sucrose solution containing 0.1 m-KCl, and actomyosin was selectively precipitated from this crude extract by removal of the sucrose. The myosin and actin were then solubilized in a buffer containing KI and separated by gel filtration.The purified Dictyostelium myosin bears a very close resemblance to muscle myosin. The amoeba protein contains two heavy chains, about 210,000 molecular weight each, and two classes of light chains, 16,000 and 18,000 molecular weight. Dictyostelium myosin is insoluble at low ionic strength and forms bipolar thick filaments. The myosin possesses ATPase activity that is activated by Ca²⁺ but not EDTA, and is inhibited by Mg²⁺; under optimal conditions the specific activity of the enzyme is 0.09 μmol P₁/min per mg myosin.Dictyostelium myosin interacts with Dictyostelium actin or muscle actin, as shown by electron microscopy and by measurements of enzymatic activity. The ATPase activity of Dictyostelium myosin, in the presence of Mg²⁺ at low ionic strength, exhibits an average ninefold activation when actin is added.     

Fibrillogenesis in dense collagen solutions: a physicochemical study

Fibrillogenesis, the formation of collagen fibrils, is a key factor in connective tissue morphogenesis. To understand to what extent cells influence this process, we systematically studied the physicochemistry of the self-assembly of type I collagen molecules into fibrils in vitro. We report that fibrillogenesis in solutions of type I collagen, in a high concentration range close to that of living tissues (40-300 mg/ml), yields strong gels over wide pH and ionic strength ranges. Structures of gels were described by combining microscopic observations (transmission electron microscopy) with small- and wide-angle X-ray scattering analysis, and the influence of concentration, pH, and ionic strength on the fibril size and organization was evaluated. The typical cross-striated pattern and the corresponding small-angle X-ray scattering 67-nm diffraction peaks were visible in all conditions in the pH 6 to pH 12 range. In reference conditions (pH 7.4, ionic strength = 150 mM, 20 °C), collagen concentration greatly influences the overall macroscopic structure of the resultant fibrillar gels, as well as the morphology and structure of the fibrils themselves. At a given collagen concentration, increasing the ionic strength from 24 to 261 mM produces larger fibrils until the system becomes biphasic. We also show that fibrils can form in acidic medium (pH ∼ 2.5) at very high collagen concentrations, beyond 150 mg/ml, which suggests a possible cholesteric-to-smectic phase transition. This set of data demonstrates how simple physicochemical parameters determine the molecular organization of collagen. Such an in vitro model allows us to study the intricate process of fibrillogenesis in conditions of molecular packing close to that which occurs in biological tissue morphogenesis.     

Association and dissociation of the thick and thin filaments within myofibrils in conditions of “contraction” and “relaxation”

1. The current assumption that the low ATPase activity of relaxed myofibrils is represented by the ATPase activity of myosin which has been set free during the dissociation of actomyosin was investigated. For this purpose, the ATPase activity of relaxed skeletal myofibrils of the rabbit and of the crab Maia squinado has been compared with the activity of contracted fibrils and of purified rabbit myosin in conditions of varying ionic strength, pH and concentrations of MgATP (i.e. MgATP²⁻ + MgHATP⁻) and Mg²⁺.

2. Contraction and relaxation of the fibrils was induced by changing the concentration of Ca²⁺ from about 5×10⁻⁵ to below 1×10⁻⁸ M.

3. In all conditions studied, the ATPase activity of relaxed fibrils was about 6–8 times less than that of the contracted fibrils, but it remained a typical actomyosin ATPase.

4. Quantitatively and qualitatively, this ATPase differs from the ATPase of myosin. For instance, its dependence on pH is the reverse of that of the myosin ATPase.

5. Calculation showed that the fibrils are dissociated by 90% in conditions of relaxation. Since the ATPase activity of myosin was merely some 2% of the actomyosin activity, the major part of the ATPase of fibrils, even at a dissociation of 90%, is bound to show the properties of the ATPase of actomyosin.

6. However, a dissociation of 90% cannot be distinguished from a dissociation of 100% by means of physical methods (viscosity, superprecipitation, resistance to stretch, etc.). This explains why physical methods indicate a “full” dissociation of actomyosin although, enzymatically, the ATPase is still of the actomyosin type.

7. The possible reasons are discussed for the discrepancy between the 100-fold increase in the ATP turnover and the 1000-fold increase in energy turnover of the living muscle during the transition from relaxed to active state. The most probable explanation seems to be an ATPase activity of myosin which is too high by a factor of ten as compared to the energy turnover of living muscle at the resting state. This high activity cannot be caused by a contamination of the myosin by Ca²⁺-insensitive actomyosin.     

Isolation,characterization and localization of bovine adrenal medullary myosin

Summary Myosin was isolated in high purity from the bovine adrenal medulla by gel filtration and ion exchange chromatography. The purified myosin was analyzed by electrophoresis in gels containing SDS and found to contain a 200,000 molecular weight heavy chain and major light chains of molecular weights 20,000 and 17,000 in a 111 molar ratio. At high ionic strength the myosin had high Ca-ATPase and K-EDTA-ATPase activities and low Mg-ATPase activity. At low ionic strength, the Mg-ATPase was activated to a low level by rabbit muscle actin. The myosin was found to decorate F-actin in the absence, but not the presence of ATP. In low ionic strength solutions, the myosin assembled into characteristic bipolar filaments.The distribution of this myosin in the adrenal medulla and of cross-reacting myosin in several other bovine tissues was determined with the use of antimedullary myosin immunoglobulin G as a specific stain that was detected by direct and indirect immunofluorescence. In the medulla strong staining was seen between the chords of chromaffin cells indicating the presence of a highly muscular vasculature that may perform functions analogous to those of the myoepithelium of exocrine glands. The chromaffin cells showed weak positive staining around the nuclei and in a pattern radiating toward adjacent blood vessels. Cells of the inner zone of the adrenal cortex showed strong staining in the peripheral cytoplasm while cells in the intermediate and outer zones did not stain. In a blood smear, platelets and the cytoplasm of leukocytes stained strongly while erythrocytes did not stain. In striated muscle and the gray and white matter of the cerebrum only the capillaries and larger vessels stained. In the liver the phagocytic cells bordering vascular sinuses stained strongly while the hepatocytes were separated from one another by a 2 micron trilaminar band possibly representing the microfilament web surrounding the bile canaliculi and associated with junctional complexes.The results suggest that myosin is present in several highly differentiated, non-motile tissue cells where it may play a role in secretion or other specialized functions.The author gratefully acknowledges the support and encouragement received from Francis D. Carlson (Johns Hopkins University) and Harvey B. Pollard (National Institutes of Health) in whose laboratories the majority of this work was performed, as well as additional advice and assistance from John Cebra, Richard Cone, William F. Harrington, Shin Lin, Robert Wyllie and the members of their laboratories     

Physicochemical Properties and Heat-induced Gelling of Cardiac Myosin in Model System

Some physicochemical and functional properties of cardiac myosin were studied in a model system, with particular reference to its binding ability in re-structured meat. We found that myosin solubility was strongly influenced by the pH, ionic strength, and temperature of the system and by the interaction of pH and ionic strength. For instance, myosin remained completely in solution in monomeric form at ionic strengths ≤0.2 M KCl, if the pH of system was maintained at 7.0. Highionic strength was required to keep myosin in monomeric form at low pH. With low ionic strength and pH, myosin molecules tend to form aggregated filaments.

Like skeletal muscle myosin, the heat-induced gel strength of cardiac myosin was also influenced by the pH, ionic strength, and temperature of the system, and it produced a gel with maximum strength (21.× 10³dyn/cm²) at pH 5.5 and 0.1 M KCl concentration on heating to 60%C. Cardiac myosin seems to form much stronger gels than skeletal muscle myosin.     

CONTRACTION IN GLYCERINATED MYOFIBRILS OF AN INSECT (ORTHOPTERA, ACRIDIDAE)

The A substance of glycerol-treated myofibrils of the femoral muscles of the locust Gastrimargus musicus (Fabr.), removed by a salt solution of high ionic strength, has the properties of actomyosin. A phase contrast study of these fibrils, contracted by the addition of ATP, has revealed that the A bands of most myofibrils shorten during contraction. Changes in density within the A band lead to the formation of C_m and C_z bands while I bands are still present. The A band region between the contraction bands is of much lower density than it is in the uncontracted fibril. During contraction in some fibrils the I bands disappeared and the A bands remained unchanged in length until contraction bands appeared. These results have been interpreted in terms of coiling and stretching of the thick filaments of the sarcomere.     

The action of thiol reagents on the adenosine-triphosphatase activities of heavy meromyosin and L-myosin

1. The Ca²⁺-activated adenosine triphosphatase of heavy meromyosin is maximally stimulated by lower relative molar concentrations of phenylmercuric acetate than are required with myosin. 2. Stimulation of the Ca²⁺-activated adenosine triphosphatase of both heavy meromyosin and myosin by thiol reagents is markedly affected by ionic strength, the effects being greater with the former than with the latter. In particular, N-ethylmaleimide strongly inhibits the Ca²⁺-activated adenosine triphosphatase of heavy meromyosin at ionic strength below about 0·2. 3. The precise behaviour of the thiol reagents at low ionic strength is slightly modified by the age of the heavy meromyosin and myosin preparations. 4. Stimulation of the Mg²⁺-activated adenosine triphosphatase of heavy meromyosin by thiol reagents is relatively insensitive to ionic strength. 5. The adenosine triphosphatases of heavy meromyosin and myosin activated by potassium chloride in the absence of bivalent activators are inhibited by thiol reagents over the range of ionic strength at which stimulation occurs in the presence of calcium chloride as activator. 6. The modifying effects of potassium chloride and sodium chloride are qualitatively different when heavy-meromyosin adenosine triphosphatase is stimulated with phenylmercuric acetate. No such difference is observed when the enzyme is stimulated with N-ethylmaleimide.     

Actin and Myosin in pea tendrils

We demonstrate here the presence of actin and myosin in pea (Pisum sativum L.) tendrils. The molecular weight of tendril actin is 43,000, the same as rabbit skeletal muscle actin. The native molecular weight of tendril myosin is about 440,000. Tendril myosin is composed of two heavy chains of molecular weight approximately 165,000 and four (two pairs) light chains of 17,000 and 15,000. At high ionic strength, the ATPase activity of pea tendril myosin is activated by K⁺-EDTA and Ca²⁺ and is inhibited by Mg²⁺. At low ionic strength, the Mg²⁺-ATPase activity of pea tendril myosin is activated by rabbit skeletal muscle F-actin. Superprecipitation occurred after incubation at room temperature when ATP was added to the crude actomyosin extract. It is suggested that the interaction of actin and myosin may play a role in the coiling movement of pea tendril.     

Local migration of myosin in F-actin plus ATP solution on the boundary of a diffusion cell.

The diffusion phenomena of myosin (myosin A, H-meromyosin or subfragment-1) in F-actin plus ATP solutions were investigated. The upper part of the diffusion cell was filled with F-actin plus ATP, and the lower part was filled with F-actin, ATP, and myosin, then both parts were brought into contact so that a boundary of the two solutions was formed and the diffusion of myosin in F-actin plus ATP solutions started. The diffusion pattern was observed with a schlieren lens system. When almost all the ATP in the lower part of the cell had been consumed by actomyosin, a hyper-sharp schlieren pattern appeared near the boundary. On analyzing this pattern, it was found that a local fast migration of proteins was occurring. Simple Brownian motion of myosin molecules could not explain the hyper-sharp phenomenon. This phenomenon occurred in ther pesence of Mg2+ or Ca2+, but very little in the presence of EDTA. Although it is well known that the superprecipitation of myosin B suspension occurs only at physiological ionic strength, this phenomenon occurred over a relatively wide range of ionic strengths. The molecular mechanism of this phenomenon is discussed in relation to the basic mechanism of the interaction between myosin and F-actin.     

Identification of myosin in Nitella flexilis.

A myosin B-like protein was extracted from the alga Nitella flexilis. SDS-polyacrylamide gel electrophoresis revealed the presence of myosin heavy chain and actin as the main components. At high ionic strength, its ATPase [EC 3.6.1.3] reaction was activated by EDTA or Ca2+ and inhibited by Mg2+. At low ionic strength, superprecipitation was induced by the addition of ATP. Myosin was purified from Nitella myosin B. The molecular weight of the heavy chain of Nitella myosin, estimated by SDS-gel electrophoresis, was slightly higher than that of skeletal muscle myosin. At low ionic strength, Nitella myosin aggregated to form bipolar filaments about 0.2 micron long. At high ionic strength, its ATPase reaction was activated by EDTA or Ca2+, and inhibited by Mg2+. The Mg2+-ATPase reaction of Nitella myosin was activated by skeletal muscle F-actin.     

Phosphorylation of myosin light chain modulates the in vitro movement of fibrils composed of actin and myosin filaments from skeletal muscle

In vitro movement of fibrils composed of actin and myosin filaments purified from skeletal muscle was observed by dark field microscopy during superprecipitation at low ionic strengths at room temperature. The movement was activated by phosphorylation of light chain (LC2) of myosin. The activity of the movement was evaluated in terms of the spreading of the area where the fibrils were moving. Adenosine triphosphatase activity of actomyosin was also enhanced by phosphorylation of LC2 and was correlated with the activity of the in vitro movement.     

Stability of Aβ (1-42) peptide fibrils as consequence of environmental modifications

β-Amyloid peptide (Aβ) plays a key role in the pathogenesis of Alzheimer disease (AD). Monomeric Aβ undergoes aggregation, forming oligomers and fibrils, resulting in the deposition of plaques in the brain of AD patients. A widely used protocol for fibril formation in vitro is based on incubation of the peptide at low pH and ionic strength, which generates Aβ fibrils several microns long. What happens to such fibrils once they are brought to physiological pH and ionic strength for biological studies is not fully understood. In this investigation, we show that these changes strongly affect the morphology of fibrils, causing their fragmentation into smaller ones followed by their aggregation into disordered structures. We show that an increase in pH is responsible for fibril fragmentation, while increased ionic strength is responsible for the aggregation of fibril fragments. This behavior was confirmed on different batches of peptide either produced by the same company or of different origin. Similar aggregates of short fibrils are obtained when monomeric peptide is incubated under physiological conditions of pH and ionic strength, suggesting that fibril morphology is independent of the fibrillation protocol but depends on the final chemical environment. This was also confirmed by experiments with cell cultures showing that the toxicity of fibrils with different initial morphology is the same after addition to the medium. This information is of fundamental importance when Aβ fibrils are prepared in vitro at acidic pH and then diluted into physiological buffer for biological investigations.     

A MELTING POINT FOR THE BIREFRINGENT COMPONENT OF MUSCLE

The A filament of the striated muscle sarcomere is an ordered aggregate of one or a few species of proteins. Ordering of these filaments into a parallel array is the basis of birefringence in the A region, and loss of birefringence is therefore a measure of decreased order. Heating caused a large decrease in the birefringence of glycerinated rabbit psoas muscle fibers over a narrow temperature range (~3°C) and a large decrease in both the birefringence and optical density of the A region of Drosophila melanogaster fibrils. These changes were interpreted as a loss of A filament structure and were used to define a transition temperature (T_tr) as a measure of the stability of the A region. Since the transition temperature was sensitive to pH, ionic strength, and urea, solvent conditions which often affect protein structure, it is an experimentally useful indicator for factors affecting the structure of the A filament. Fibers from glycerinated frog muscle were less stable over a wide pH range than fibers from glycerinated rabbit muscle, a fact which demonstrates a species difference in structure. Glycerinated rabbit fibrils heated to 70°C shortened to about 40% of their initial length. The extent of shortening was not correlated with the loss of birefringence, and phase-contrast microscopy showed that this shortening occurred in the I region as well as in the A region. This response may be useful for studying the I filament and actin in much the same way that the decrease in birefringence was used for studying the A filament and myosin. The observations presented show that some properties of muscle proteins can be studied essentially in situ without the necessity of first dispersing the structure in solutions of high or low ionic strength.     

Correlation of conformation and phosphorylation and dephosphorylation of smooth muscle myosin

The rate of phosphorylation and dephosphorylation of smooth muscle myosin by myosin light chain kinase and by two myosin light chain phosphatases (gizzard phosphatase IV and aorta phosphatase) are measured in various conditions; the relationship between the rate of phosphorylation and dephosphorylation of myosin and the myosin conformation is also studied. The rate of dephosphorylation of myosin was completely inhibited in the presence of 1 mM MgCl2 and ATP at low ionic strength where phosphorylated myosin forms a folded conformation. The inhibition was released when myosin formed either an extended monomer or filaments. The rate of phosphorylation of myosin was also affected by the conformation of myosin. The rate for a folded myosin was slower than those for an extended monomer and filamentous myosin. The phosphorylation and dephosphorylation of heavy meromyosin, subfragment-1, and the isolated 20,000-dalton light chain are not inhibited at low ionic strength, and the rate of phosphorylation and dephosphorylation was decreased with increasing ionic strength. KCl dependence of the rate of phosphorylation and dephosphorylation of myosin was normalized by using KCl dependence of subfragment-1, and it was found that the marked inhibition of the rate of phosphorylation and dephosphorylation of myosin is closely related to the change from an extended to a folded conformation of myosin.     

Activation of the Adenosine Triphosphatase of Limulus polyphemus Actomyosin by Tropomyosin

Purified actin does not stimulate the adenosine triphosphatase (ATPase) activity of Limulus myosin greatly. The ATPase activity of such reconstituted preparations is only about one-fourth the ATPase of myofibrils or of natural actomyosin. Actin preparations containing tropomyosin, however, activate Limulus myosin fully. Both the tropomyosin and the actin preparations appear to be pure when tested by different techniques. Tropomyosin combines with actin but not with myosin and full activation is reached at a tropomyosin-to-actin ratio likely to be present in muscle. Tropomyosin and actin of several different animals stimulate the ATPase of Limulus myosin. Tropomyosin, however, is not required for the ATPases of scallop and rabbit myosin which are fully activated by pure actin alone. Evidence is presented that Limulus myosin, in the presence of ATP at low ionic strength, has a higher affinity for actin modified by tropomyosin than for pure actin.     

Isolation of Messenger Ribonucleic Acid for Myosin Heavy Chain

A chicken embryonic polysome fraction that contains 50–60 monoribosomes and synthesizes the heavy chains of myosin is separated from other polysomes of smaller sizes by centrifugation through two cycles of discontinuous and continuous sucrose gradients. The unique properties of the polyadenylic acid segment present at the 3′-end of eukaryotic messenger RNA (mRNA) were used to purify the mRNA for myosin heavy chain from the phenol-extracted total RNA obtained from this polysome fraction. The total RNA was filtered thro ugh millipore filters resulting in partition of the riboscmal RNA (rRNA) and mRNA species. This millipore-bound RNA fraction, which consists of the mRNA and some ribosomal RNAs, was eluted from the filters with sodium dodecyl sulfate (SDS). Subsequent chromatography of this fraction on a cellulose column gave two well-separated peaks: an unadsorbed peak of ribosomal RNAs which was eluted with buffers of high ionic strength and an adsorbed peak of mRNA which was eluted only with a buffer of low ionic strength. Polyacrylamide gel electrophoresis of the mRNA peak fraction showed a single band with no detectable amounts of other RNAs, the mRNA migrating slower than 28S rRNA. The product of in vitro translation of the purified mRNA using a homologous cell-free system was identified as the myosin heavy chain by the following criteria: coprecipitation with carrier myosin at low ionic strength; elution properties on DEAE-cellulose column; and comigration with the heavy chain in polyacrylamide gel electrophoresis. In order to demonstrate the fidelity of translation of the mRNA, ¹⁴C-labeled products of the in vitro translation were copurified with unlabeled myosin heavy chains added as a carrier. The mixture of polypeptides was then cleaved with CNBr and the resulting peptides were separated by molecular sieving. The correlation between the radioactivity and the UV absorbance in the separated peptides indicates that total synthesis of the myosin heavy chain was achieved.     

Gelsolin sensitivity of microfilaments as a marker for muscle differentiation

The ability of porcine smooth muscle gelsolin to sever actin filaments was used to study alterations in the organization of F-actin containing structures during skeletal myogenesis. In permeabilized fibroblasts and unfused myoblasts, gelsolin induced complete degradation of the actin cytoskeleton. After fusion of myoblasts to multinucleated myotubes, gelsolin removed a substantial amount of actin, revealing fibers with a sarcomere-like arrangement of gelsolin-insensitive actin. These fibrils were much thinner and had shorter sarcomeres than fully differentiated myofibrils. The proportion of gelsolin-resistant fibrils increased during differentiation, resulting in almost complete inertness of mature myofibrils. Fibrils isolated from adult muscle were also found nearly resistant to gelsolin. Extraction of tropomyosin and myosin in buffer of high ionic strength prior to gelsolin treatment reestablished the susceptibility to the severing protein, both in myotubes and isolated myofibrils. Only small remnants of phalloidin-stainable material were retained. We therefore conclude that during myotube differentiation either an increased interaction of actin with actin-binding proteins (e.g., myosin and tropomyosin), or the assembly of muscle-specific isoforms of these proteins protect the filaments against degradation by actin severing proteins.     

Effects of ionic strength on calcium binding to rabbit skeletal myofibrils,thin filaments and myosin

Calcium binding by rabbit skeletal myosin, thin filaments and myofibrils was measured in solutions with and without 2 mM MgATP and with ionic strengths adjusted with KCl to 0.05, 0.10 and 0.14 M. Free Mg²⁺ was held constant at 1 mM, pH at 7.0 and temperature at 25 °C. In the presence of MgATP, the relation between free Ca²⁺ and myofibrillar bound calcium shifted to the left as ionic strength was decreased from 0.14 to 0.05 M. In the absence of MgATP, myofibrillar calcium binding was enhanced over a wide range of free Ca²⁺ concentration, but calcium binding was no longer a function of ionic strength. Similarly, calcium binding by thin filaments and myosin was unaffected by changes in ionic strength from 0.05 to 0.14 M. In view of evidence that cross-bridge connections between thick and thin filaments increase as ionic strength decreases, our results suggest that these connections enhance myofibrillar calcium binding. These results thus confirm previous data of Bremel and Weber (Bremel, R. D. and Weber, A. (1972) Nature New Biol. 238, 97–101) who first showed that nucleotide-free cross-bridge connections enhance thin filament calcium binding.     

Measurement of the fraction of myosin heads bound to actin in rabbit skeletal myofibrils in rigor

Tryptic digestion of rabbit skeletal myofibrils at physiological ionic strength and pH results in cleavage of the myosin heavy chain at one site giving two bands (M_r = 200,000 and 26,000) on sodium dodecyl sulfate/polyacrylamide gels. Following addition of sodium pyrophosphate (to 1 mm) to dissociate the myosin heads from actin, tryptic proteolysis results in production of three bands, 160K², 51K and 26K, with a 74K band appearing as a precursor of the 51K and 26K species. Under these conditions, there is insignificant cleavage of heavy chain to the heavy and light meromyosins. Trypsin-digested myofibrils yield the same amount of rod as native myofibrils when digested with papain. These results indicate that actin blocks tryptic cleavage of the myosin heavy chain at a site 74K from the N terminus. From measurements of the amount of 51K species formed by digestion of rigor fibers at various sarcomere lengths, we estimate that at least 95% of the myosin heads are bound to actin at 100% overlap of thick and thin filaments. Hence all myosin molecules can bind to actin, and consequently both heads of a myosin molecule can interact simultaneously with actin filaments under rigor conditions.