Shoot culture of Bacopa monnieri: standardization of explant,vessels and bioreactor for growth and antioxidant capacity

Standardization of biomass production in different vessels and bioreactor using explants and media for growth, total phenolic content and antioxidant capacity of shoot culture of Bacopa monnieri is described. Maximum number of shoots per explant, higher explants response irrespective of the type of explants, and higher shoot length was obtained on MS medium containing BAP (2.5 mg l⁻¹) and IAA (0.01 mg l⁻¹) with 3 % sucrose. This medium was selected by varying BAP concentration and recorded optimal for shoot culture on gelled medium. The condition of 0.5 cm explant size and 20 explant/40 ml (1 explant/2 ml) was optimal for high explant response, number of shoots per explant regenerated and shoots length. Among the different vessels used, maximum growth index was achieved in Growtek bioreactor (10.0) followed by magenta box (9.16), industrial glass jar (7.7) and conical flask (7.2). The cultures grown in conical flask (100 ml) were used as control. The total phenolic content and antioxidant capacity of in vitro grown plants was higher to that recorded for in vivo material. Among in vitro regenerated plants, the activity was maximal in the tissues grown in 250 ml conical flask. The most critical function for vessels is to support the optimum profusion (growing area for maximum growth) of shoots and for B. monnieri, Growtek bioreactor supported 1980 shoots l⁻¹ medium as compared to control (938 shoots l⁻¹). Growtek bioreactor was considered effective system to produce B. monnieri biomass in culture without loss of antioxidant properties.     

In vitro regeneration of Eucalyptus camaldulensis

An efficient in vitro regeneration protocol enables mass multiplication, genetic modification and germplasm conservation of desired plants. In vitro plant regeneration was achieved from nodal segments of 18-months-old superior genotypes of Eucalyptus camaldulensis trees through direct organogenesis (DO) and direct somatic embryogenesis (DSE) pathways. Initial bud break (BB) stage occurred via DO while shoot multiplication phase followed both DO and DSE pathways. Interestingly, both BB and shoot multiplication stages were achieved on shoot induction and multiplication (SIM) media composed of Murashige and Skoog (MS) basal medium supplemented with 2 mg l⁻¹ benzyl aminopurine (BAP) and 0.1 mg l⁻¹ naphthalene acetic acid (NAA). Best shoot elongation response was observed on half strength MS fortified with 0.5 mg l⁻¹ BAP, while root induction and elongation was superior in 1/2 MS + 1 mg l⁻¹ Indole butyric acid (IBA). Full strength MS fortified with cytokinins (BAP) and weak auxin (NAA) in the ratio of 20:1 favored direct regeneration pathways. Further, half strength MS supported shoot and root development. The absence of intervening callus phase in this protocol can help in minimizing the chance occurrence of somaclones. When compared to other compositions tried, hardening in 100 % coco peat resulted in maximum survival (80 %) of the in vitro raised plantlets. For mass multiplication, fortnight subculturing of a single nodal explants for eight passages on SIM medium resulted in 60–148 shoot initials. Repeated subculturing in SIM medium induced the formation of direct somatic embryos which in turn improved the turnover capacity and enabled large scale clonal multiplication of elite and desirable trees of E. camaldulensis. Following this protocol, it takes a minimum time period of four-months between in vitro explant inoculation to hardening stage. In the present study, DO and DSE pathway of plant regeneration was reported occurring simultaneously in the same nodal explants of E. camaldulensis.     

Alginate-encapsulation of shoot tips of jojoba [Simmondsia chinensis (Link) Schneider] for germplasm exchange and distribution

Shoot tips excised from in vitro proliferated shoots derived from nodal explants of jojoba [Simmondsia chinensis (Link) Schneider] were encapsulated in calcium alginate beads for germplasm exchange and distribution. A gelling matrix of 3 % sodium alginate and 100 mM calcium chloride was found most suitable for formation of ideal calcium alginate beads. Best response for shoot sprouting from encapsulated shoot tips was recorded on 0.8 % agar-solidified full-strength MS medium. Rooting was induced upon transfer of sprouted shoots to 0.8 % agar-solidified MS medium containing 1 mg l⁻¹ IBA. About 70 % of encapsulated shoot tips were rooted and converted into plantlets. Plants regenerated from encapsulated shoot tips were acclimatized successfully. The present encapsulation approach could also be applied as an alternative method of propagation of desirable elite genotype of jojoba.     

An efficient and reproducible indirect shoot regeneration from female leaf explants of Simmondsia chinensis,a liquid-wax producing shrub

Simmondsia chinensis (Link) Schneider is a perennial, dioecious, drought resistant and multipurpose seed oil crop grown in arid and semi-arid conditions throughout the world. A reproducible and more efficient method for indirect shoot organogenesis from female leaf explants has been standardized. The leaf explants cultured on Murashige and Skoog (MS) medium with 1.0 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) alone produced the highest frequency of callus compared with 1.5 mg l⁻¹ IBA. Maximum proliferation of callus was observed on MS medium containing a combination of 1.0 mg l⁻¹ 2,4-D with 0.5 mg l⁻¹ BAP. For shoot differentiation, the proliferated callus was subcultured on MS medium supplemented with 6-benzylaminopurine (BAP) (1.0–4.0 mg l⁻¹) along with 40 mg l⁻¹ adenine sulphate as additive or in combination with α-naphthalene acetic acid (NAA) or Indole-3-butyric acid (IBA). Optimum shoots differentiated from callus was obtained on MS medium supplemented with 2.0 mg l⁻¹ BAP and 0.2 mg l⁻¹ NAA. On this medium, 100 % cultures were responded with an average number of 14.44 shoots per explant with their mean length of 4.78 cm. In vitro rooting (6.22 roots per explant) was achieved on half strength MS medium containing 2 % sucrose with 3.0 mg l⁻¹ IBA and 300 mg l⁻¹ activated charcoal (AC). Rooted plantlets were successfully hardened under control conditions and acclimatized under field conditions with 90 % success rate. The present protocol is highly efficient, reproducible and economically viable for large scale production of female plants.     

Micropropagation and in vitro conservation of the rare and threatened plants Ramonda serbica and Ramonda nathaliae

Ramonda serbica and Ramonda nathaliae are rare and endemo relict plant species from Balkan Peninsula. An efficient micro propagation and in vitro conservation method via direct and indirect organogenesis from seed and leaf explants, respectively, was established in this study. The seed of both Ramonda species were collected from different populations in Kosovo, and were germinated in nutrient media JG-B without any phytohormone. The highest number of shoots and multiplication rate was observed on JG-B medium supplemented with BAP and IAA (0.5 mg l⁻¹ each), whereas the highest number of leaves per plantlets was found on WPM and RA medium supplemented with BAP and IAA (0.1 mg l⁻¹ each). During this stage of micro propagation some significant differences were observed in plantlets from different populations. The indirect organogenesis from parts of leaves of natural plants was not successful due to unavailability of established protocol for disinfections of the plant material. On other hand, parts of leaves from micro propagated plantlets, cultured on MS medium supplemented with different ratio of BAP and NAA, resulted in the highest efficiency for shoot regeneration. In vitro conservation of micro propagated plants at the lower temperature (4 °C) had a significantly positive effect for storage of more than 12 months.     

Penicillium ochrochloron MTCC 517 chitinase: An effective tool in commercial enzyme cocktail for production and regeneration of protoplasts from various fungi

Penicillium ochrochloron MTCC 517 is a potent producer of chitinolytic enzymes. Novozyme 234, traditional enzyme cocktail for protoplast generation is not available in the market. So, new enzyme cocktail is prepared for protoplast formation from various filamentous fungi which consists of 5 mg ml⁻¹ lysing enzymes from Trichoderma harzianum, 0.06 mg ml⁻¹ β-glucuronidase from Helix pomatia and 1 mg ml⁻¹P. ochrochloron chitinase. The greatest number of protoplasts could be produced from most of the fungi in 0.8 M sorbitol and by incubation for about 2 h at 37 °C, but the number was decreased by incubation for more than 3 h. About twice as many protoplasts were produced from different species of fungi by involvement of P. ochrochloron chitinase than with combined commercial enzymes.     

Low-temperature leaf photosynthesis of a Miscanthus germplasm collection correlates positively to shoot growth rate and specific leaf area

Background and Aims The C₄ perennial grass miscanthus has been found to be less sensitive to cold than most other C₄ species, but still emerges later in spring than C₃ species. Genotypic differences in miscanthus were investigated to identify genotypes with a high cold tolerance at low temperatures and quick recovery upon rising temperatures to enable them to exploit the early growing season in maritime cold climates. Suitable methods for field screening of cold tolerance in miscanthus were also identified.Methods Fourteen genotypes of M. sacchariflorus, M. sinensis, M. tinctorius and M. × giganteus were selected and grown under warm (24 °C) and cold (14 °C) conditions in a controlled environment. Dark-adapted chlorophyll fluorescence, specific leaf area (SLA) and net photosynthetic rate at a photosynthetically active radiation (PAR) of 1000 μmol m^–2 s^–1 (A₁₀₀₀) were measured. Photosynthetic light and CO₂ response curves were obtained from 11 of the genotypes, and shoot growth rate was measured under field conditions.Key Results A positive linear relationship was found between SLA and light-saturated photosynthesis (A_sat) across genotypes, and also between shoot growth rate under cool field conditions and A₁₀₀₀ at 14 °C in a climate chamber. When lowering the temperature from 24 to 14 °C, one M. sacchariflorus exhibited significantly higher A_sat and maximum photosynthetic rate in the CO₂ response curve (V_max) than other genotypes at 14 °C, except M. × giganteus ‘Hornum’. Several genotypes returned to their pre-chilling A₁₀₀₀ values when the temperature was increased to 24 °C after 24 d growth at 14 °C.Conclusions One M. sacchariflorus genotype had similar or higher photosynthetic capacity than M. × giganteus, and may be used for cultivation together with M. × giganteus or for breeding new interspecies hybrids with improved traits for temperate climates. Two easily measured variables, SLA and shoot growth rate, may be useful for genotype screening of productivity and cold tolerance.     

Effects of Riyadh cement industry pollutions on some physiological and morphological factors of Datura innoxia Mill. plant

Cement factory emissions into air cause serious air pollution and affect the plant and animal life in the environment. Herein, we report the effects of cement industry emissions (O₃, SO₂ and NO₂) in air, as pollutants, at Riyadh City on Datura innoxia Mill. plant. Morphological characters including plant height, leaves area and number, fresh and dry weight of shoot and root systems of D. innoxia showed a significant reduction from their normal control plants as a response to exposure to pollutant emissions. Chlorophyll and carotenoid contents recorded reductions in values compared to control plant, and the lowest values of chlorophyll A, B, total chlorophyll, carotenoids and total pigments were 0.431, 0.169, 0.60, 0.343 and 0.943 mg/g respectively at a distance of 1–5 m from the cement factory in fruiting stage. These changes in values may be attributed to a probable deceleration of the biosynthetic process rather than degradation of pigments. Further D. innoxia showed a significant (P < 0.01) reduction in non-reducing and total sugars, protein and total lipid contents compared with the control plant. The root system recorded the lowest values of reducing sugars (0.350 mg/g f. wt.), non-reducing sugars (0.116 mg/g f. wt.), total sugars (0.466 mg/g f. wt.), protein content (0.931 mg/g f. wt.) and total lipids content (0.669 mg/g f. wt.) in fruiting stage at a distance of 1–5 m from the cement factory. The peroxidase activity of shoot and root systems of the studied plant was also significantly higher than those of control plant. Thus a highest value of (29.616 units/g f. wt.) peroxidase activity was recorded in vegetative stage of shoot system at a distance 1–5 m from the cement factory. Results of the study indicated that cement industry emission strongly influence the physiology and morphology of date palm D. innoxia which contribute date fruits, a staple food in the Arab world.     

An efficient plant regeneration system through callus for Pseudarthria viscida (L.) Wright and Arn., a rare ethnomedicinal herb

The purpose of this study was to develop a protocol to induce high frequency of callus and subsequent plantlet regeneration for Pseudarthria viscida; an important medicinal plant. The cotyledonary node and young leaf pieces (1 × 0.5 cm, length × breadth) were used as explants for callus induction and subsequent shoot regeneration and adventitious roots induction from the shoots. The best results were achieved on the following media: (1) 96 % callus induction from cotyledonary node explants on MS medium supplemented with 1.5 mgl⁻¹ 2, 4 dichlorophenoxyacetic acid (2, 4-D) and 0.5 mgl⁻¹ 1-naphthalene acetic acid (NAA), (2) 97 % shoot regeneration from cotyledonary node derived calli with an average of 44.9 shoots per explant on MS medium fortified with 3.0 mgl⁻¹ N₆-benzylaminopurine (BA) and 1 mgl⁻¹ NAA,37 (3) 98 % rooting with an average number of 3.3 roots per shoot on MS medium containing indole-3-butyric acid (IBA) or NAA (0.5–4 mgl⁻¹) after 45 days. The plantlets were transferred to the field after acclimatization. Of the 40 plantlets transplanted to the soil, 29 survived (72.5 %).     

High frequency organogenesis in hypocotyl,cotyledon, leaf and petiole explants of broccoli (Brassica oleracea L. var. italica), an important vegetable crop

Broccoli (Brassica oleracea L. var. italica) is an important, nutritionally rich vegetable crop, but severely affected by environmental stresses, pests and diseases which cause massive yield and quality losses. Genetic manipulation is becoming an important method for broccoli improvement. In the present study, a reproducible and highly efficient protocol for obtaining organogenesis from hypocotyl, cotyledon, leaf and petiole explants of broccoli (Brassica oleracea L. var. italica cv. Solan green head) has been developed. Hypocotyl and cotyledon explants were used from 10 to 12 days old aseptically grown seedlings whereas leaf and petiole explants were excised from 18 to 20 days old green house grown seedlings and surface sterilized. These explants were cultured on shoot induction medium containing different concentration and combination of BAP and NAA. High efficiency shoot regeneration has been achieved in hypocotyl (83.33 %), cotyledon (90.11 %), leaf (62.96 %) and petiole (91.10 %) explants on MS medium supplemented with 3.5 mg/l BAP + 0.019 mg/l NAA 2.5 mg/l BAP + 0.5 mg/l NAA, 4.0 mg/l BAP + 0.5 mg/l NAA and 4.5 mg/l BAP + 0.019 mg/l NAA respectively. Petiole explants showed maximum shoot regeneration response as compared to other explants. MS medium supplemented with 0.10 mg/l NAA was found best for root regeneration (100 %) from in vitro developed shoots. The regenerated complete plantlets were transferred to the pots containing cocopeat and successfully acclimatized. This optimized regeneration protocol can be efficiently used for genetic transformation in broccoli. This is the first comparative report on multiple shoot induction using four different types of explants viz. hypocotyl, cotyledon, leaf and petiole.     

Micropropagation of commercially cultivated Henna (Lawsonia inermis) using nodal explants

Lawsonia inermis Linn. (Mehandi) is cultivated as cash crop in India particularly in Sojat area of Pali district, Rajasthan. Present investigation describes an efficient regeneration system for elite genotype of L. inermis using nodal segments. Optimum response in terms of percent cultures responding, days to bud break and average shoot length was observed on MS medium supplemented with 6-benzylaminopurine (BA; 2.0 mg l⁻¹). Shoot multiplication was influenced by plant growth regulators, repeated transfer of explants and addition of ammonium sulphate. Maximum shoots were regenerated on MS medium supplemented with BA (0.25 mg l⁻¹), kinetin (Kn; 0.25 mg l⁻¹), indole-3-acetic acid (IAA; 0.1 mg l⁻¹) and ammonium sulphate (150 mg l⁻¹). To reduce resources, time and labours costs, we have also attempted ex vitro rooting of shoots. About 95 % shoots were rooted ex vitro on soilrite after treatment with indole-3-butyric acid (IBA; 300 mg l⁻¹) and 2-naphthoxy acetic acid (NOA; 100 mg l⁻¹) and establishment in soil successfully.Keyword: Ex vitro rooting, Lawsonia inermis, Plant growth regulator, In vitro propagation, Repeated transfer     

Selection of suitable propagation method for consistent plantlets production in Stevia rebaudiana (Bertoni)

Stevia rebaudiana (Bert.) is an emerging sugar alternative and anti-diabetic plant in Pakistan. That is why people did not know the exact time of propagation. The main objective of the present study was to establish feasible propagation methods for healthy biomass production. In the present study, seed germination, stem cuttings and micropropagation were investigated for higher productivity. Fresh seeds showed better germination (25.51–40%) but lost viability after a few days of storage. In order to improve the germination percentage, seeds were irradiated with 2.5, 5.0, 7.5 and 10 Gy gamma doses. But gamma irradiation did not show any significant change in seed germination. A great variation in survival of stem cutting was observed in each month of 2012. October and November were found the most suitable months for stem cutting survival (60%). In order to enhance survival, stem cuttings were also dipped in different plant growth regulators (PGRs) solution. Only indole butyric acid (IBA; 1000 ppm) treated cutting showed a higher survival (33%) than control (11.1%). Furthermore, simple and feasible indirect regeneration system was established from leaf explants. Best callus induction (84.6%) was observed on MS-medium augmented with 6-benzyladenine (BA) and 2,4-dichlorophenoxyacetic acid (2,4-D; 2.0 mg l⁻¹). For the first time, we obtained the highest number of shoots (106) on a medium containing BA (1.5 mg l⁻¹) and gibberellic acid (GA₃; 0.5 mg l⁻¹). Plantlets were successfully acclimatized in plastic pots. The current results preferred micropropagation (85%) over seed germination (25.51–40%) and stem cutting (60%).     

Chemical role of α-tocopherol in salt stress mitigation by improvement in morpho-physiological attributes of sunflower (Helianthus annuus L.)

Elevated concentrations of salts in soil and water represent abiotic stresses. It considerably restricts plant productivity. However, the use of alpha-tocopherol (α-toc) as foliar can overcome this problem. It can improve crop productivity grown under salinity stress. Limited literature is documented regarding its optimum foliar application on sunflower. That’s why the need for the time is to optimize α-toc foliar application rates for sunflower cultivated in salt-affected soil. A pot experiment was performed to select a better α-toc foliar application for mitigation of salt stress in different sunflower cultivars FH (572 and 621). There were 2 levels of salts, i.e., control (no salt stress) and sodium chloride (120 mM) and four α-toc foliar application (0, 100, 200, and 300 mg L⁻¹). Results showed that foliar application of 100 mg/L- α-toc triggered the remarkable increase in fresh shoot weight, fresh root weight, shoot, and root lengths under salinity stress in FH-572 and FH-621 over 0 mg/L- α-toc. Foliar application of 200 mg/L- α-toc was most effective for improvement in chlorophyll a, chlorophyll b, total chlorophyll and carotenoids compared to 0 mg/L- α-toc. Furthermore, an increase in A was noted in FH-572 (17%) and FH-621 (22%) with α-toc (300 mg L⁻¹) application under saline condition. In conclusion, the 100 and 200 mg/L- α-toc are the best application rates for the improvement in sunflower FH-572 and FH-621 growth, chlorophyll contents and gas exchange attributes. Further investigations are needed to select a better foliar application rate between 100 and 200 mg/L- α-toc at the field level under the different agro-climatic zone and soil types.     

Sensitivity of growth and biomass allocation patterns to increasing nitrogen: a comparison between ephemerals and annuals in the Gurbantunggut Desert,north-western China

Background and Aims

Biomass accumulation and allocation patterns are critical to quantifying ecosystem dynamics. However, these patterns differ among species, and they can change in response to nutrient availability even among genetically related individuals. In order to understand this complexity further, this study examined three ephemeral species (with very short vegetative growth periods) and three annual species (with significantly longer vegetative growth periods) in the Gurbantunggut Desert, north-western China, to determine their responses to different nitrogen (N) supplements under natural conditions.

Methods

Nitrogen was added to the soil at rates of 0, 0·5, 1·0, 3·0, 6·0 and 24·0 g N m⁻² year⁻¹. Plants were sampled at various intervals to measure relative growth rate and shoot and root dry mass.

Key Results

Compared with annuals, ephemerals grew more rapidly, increased shoot and root biomass with increasing N application rates and significantly decreased root/shoot ratios. Nevertheless, changes in the biomass allocation of some species (i.e. Erodium oxyrrhynchum) in response to the N treatment were largely a consequence of changes in overall plant size, which was inconsistent with an optimal partitioning model. An isometric log shoot vs. log root scaling relationship for the final biomass harvest was observed for each species and all annuals, while pooled data of three ephemerals showed an allometric scaling relationship.

Conclusions

These results indicate that ephemerals and annuals differ observably in their biomass allocation patterns in response to soil N supplements, although an isometric log shoot vs. log root scaling relationship was maintained across all species. These findings highlight that different life history strategies behave differently in response to N application even when interspecific scaling relationships remain nearly isometric.     

Thermus parvatiensis RLT sp. nov., Isolated from a Hot Water Spring,Located Atop the Himalayan Ranges at Manikaran,India

A Gram negative, yellow pigmented, rod shaped bacterium designated as RL^T was isolated from a hot water spring (90–98 °C) located at Manikaran in Northern India. The isolate grows at 60–80 °C (optimum, 70 °C) and at pH 7.0–9.0 (optimum pH 7.2). Phylogenetic analysis of 16S rRNA gene sequences and levels of DNA–DNA relatedness together indicate that the new isolate represents a novel species of the genus Thermus with closest affinity to Thermus thermophilus HB8^T (99.5 %) followed by Thermus arciformis (96.4 %). A comparative analysis of partial sequences of housekeeping genes (HKG) further revealed that strain RL^T is a novel species belonging to the genus Thermus. The melting G+C content of strain RL^T was calculated as 68.7 mol%. The DNA–DNA relatedness value of strain RL^T with its nearest neighbours (>97 %) was found to be less than 70 % indicating that strain RL^T represents a novel species of the genus Thermus. MK-8 was the predominant respiratory quinone. The presence of characteristic phospholipid and glycolipid further confirmed that strain RL^T belongs to the genus Thermus. The predominant fatty acids of strain RL^T were iso-C_17:0 (23.67 %) and iso-C_15:0 (24.50 %). The results obtained after DNA–DNA hybridization, biochemical and physiological tests clearly distinguished strain RL^T from its closely related species. Thus, strain RL^T represents a novel species of the genus Thermus for which the name Thermus parvatiensis is proposed (=DSM 21745^T= MTCC 8932^T).

Electronic supplementary material

The online version of this article (doi:10.1007/s12088-015-0538-4) contains supplementary material, which is available to authorized users.     

Effect of Sclerotinia sclerotiorum on the disease development,growth, oil yield and biochemical changes in plants of Mentha arvensis

Experiment was carried out to determine the effect of Sclerotinia sclerotiorum on the disease development, growth, oil yield and biochemical changes in the plants of Mentha arvensis. With the increase in initial inoculum levels of S. sclerotiorum a corresponding decrease in plant fresh and dry weights were recorded. The maximum reduction in the shoot-roots/suckers fresh weight and shoot-roots/suckers dry weights (39.8%, 43.6%, 40.3% and 42.9%), respectively, was observed at the highest initial inoculum level of 12 g fungal mycelium/5 kg soil as compared to uninoculated control. The infection of roots and suckers due to S. sclerotiorum increased with increasing initial inoculum levels. At the lowest initial inoculum (1.0 g mycelium/5 kg soil), infection was observed 18.0% and at the highest (12 g mycelium/5 kg soil), it was 80.2%. Significant (P ⩽ 0.01) reduction in oil yield, total chlorophyll, total phenol and total sugar content of M. arvensis plants was observed at the lowest inoculum level as compared to uninoculated control.     

Bioremoval capacity of three heavy metals by some microalgae species (Egyptian Isolates)

Three fresh water microalgal isolates [Phormidium ambiguum (Cyanobacterium), Pseudochlorococcum typicum and Scenedesmus quadricauda var quadrispina (Chlorophyta)] were tested for tolerance and removal of mercury (Hg²⁺), lead (Pb²⁺) and cadmium (Cd²⁺) in aqueous solutions as a single metal species at conc. 5–100 mg / L under controled laboratory conditions. The obtained results showed that Hg²⁺ was the most toxic of the three metal ions to the test algae even at low concentration (< 20 mg/L). While lower concentration of Pb²⁺ and Cd²⁺ (5–20 mg / L) enhanced the algal growth (chlorophyll a and protein), elevated concentrations (40–100 mg / L) were inhibitory to the growth. The results also revealed that Ph. ambiguum was the most sensitive alga to the three metal ions even at lower concentrations (5 and 10 mg / L) while P. typicum and S. quadricauda were more tolerant to high metal concentrations up to 100 mg / L. The bioremoval of heavy metal ions (Hg²⁺, Pb²⁺ and Cd²⁺) by P. typicum from aqueous solution showed that the highest percentage of metal bioremoval occurred in the first 30 min of contact recording 97% (Hg²⁺), 86% (Cd²⁺) and 70% (Pb²⁺). Transmission electron microscopy (TEM) was used to study the interaction between heavy metal ions and P. typicum cells. At ultrastructural level, an electron dense layers were detected on the algal cell surfaces when exposed to Cd, Hg and Pb. At the same time, dark spherical electron dense bodies were accumulated in the vacuoles of the algal cells exposed to Pb. Excessive accumulation of starch around the pyrenoids were recorded as well as deteriorations of the algal cell organelles exposed to the three metal ions.     

Mild ammonium stress increases chlorophyll content in Arabidopsis thaliana

Nitrate (NO₃⁻) and ammonium (NH₄⁺) are the main forms of nitrogen available in the soil for plants. Excessive NH₄⁺ accumulation in tissues is toxic for plants and exclusive NH₄⁺-based nutrition enhances this effect. Ammonium toxicity syndrome commonly includes growth impairment, ion imbalance and chlorosis among others. In this work, we observed high intraspecific variability in chlorophyll content in 47 Arabidopsis thaliana natural accessions grown under 1 mM NH₄⁺ or 1 mM NO₃⁻ as N-source. Interestingly, chlorophyll content increased in every accession upon ammonium nutrition. Moreover, this increase was independent of ammonium tolerance capacity. Thus, chlorosis seems to be an exclusive effect of severe ammonium toxicity while mild ammonium stress induces chlorophyll accumulation.     

Impact of bio-fertilizers and different levels of cadmium on the growth,biochemical contents and lipid peroxidation of Plantago ovata Forsk

Plantago ovata Forsk. (isabgol) is a valuable medicinal plant; its seeds and shell have a significant role in pharmacy as a laxative compound. Increasing soil contamination with cadmium (Cd) is one of the major concerns and is responsible for toxic effects in plants. This investigation was aimed to analyze the role of biofertilizers in alleviation of cadmium stress, given at the rate of 0, 50, and 100 mg kg⁻¹ of soil. The plants of isabgol, were grown in pots with and without application of AM fungi and Azotobacter (alone and combination). Cadmium showed negative effect on growth and biochemical component whereas proline and MDA content increase with increasing cadmium concentration. Addition of bio-fertilizer showed better growth and higher pigment concentration under cadmium stress as compared to the control. The dual inoculation of AM fungi and Azotobacter was found to be the best in reduction of cadmium stress and promotion of growth parameters.