Both a short hydrophobic domain and a carboxyl-terminal hydrophilic region are important for signal function in the Escherichia coli leader peptidase

Leader peptidase, typical of inner membrane proteins of Escherichia coli, does not have an amino-terminal leader sequence. This protein contains an internal signal peptide, residues 51-83, which is essential for assembly and remains as a membrane anchor domain. We have employed site-directed mutagenesis techniques to either delete residues within this domain or substitute a charged amino acid for one of these residues to determine the important properties of the internal signal. The deletion analysis showed that a very small apolar domain, residues 70-76, is essential for assembly, whereas residues that flank it are dispensable for its function. However, point mutations with charged amino acid residues within the polar sequence (residues 77-82) slow or abolish leader peptidase membrane assembly. Thus, a polar region, Arg-Ser-Phe-Ile-Tyr-Glu, is important for the signal peptide function of leader peptidase, unlike other signals identified thus far.     

Identification of potential active-site residues in the Escherichia coli leader peptidase.

Leader peptidase of Escherichia coli cleaves the leader sequence from the amino terminus of membrane and secreted proteins after these proteins insert across the membrane. Despite considerable research, the mechanism of catalysis of leader peptidase remains unknown. This peptidase cannot be classified using protease inhibitors to the serine, cysteine, aspartic acid, or metallo- classes of proteases (Zwizinski, C., Date, T., and Wickner, W. (1981) J. Biol. Chem. 256, 3593-3597). Using site-directed mutagenesis, we have attempted to place leader peptidase in one of these groups. We found that leader peptidase, lacking all of the cysteine residues, can cleave the leader peptide from procoat, the precursor to bacteriophage M13 coat protein. Replacement of each histidine residue with an alanyl residue was without effect on catalysis. Among all the serine and aspartic acid residues, serine 90 and serine 185 as well as aspartic acid 99, 153, 273, and 276 are necessary to cleave procoat in a detergent extract. However, only serine 90 and aspartic acid 153 were required for processing using a highly sensitive in vivo assay. In addition to the residues directly affecting catalysis, aspartic acid 99 plays a role in maintaining the structure of leader peptidase. Replacement of this residue with alanine results in a very unstable leader peptidase protein. This study thus defines two critical residues, serine 90 and aspartic acid 153, that may be directly involved in catalysis and provides evidence that leader peptidase belongs to a novel class of serine proteases.     

The role of the polar, carboxyl-terminal domain of Escherichia coli leader peptidase in its translocation across the plasma membrane

Leader peptidase, an integral membrane protein of Escherichia coli, is made without a cleavable leader sequence. It has 323 amino acid residues and spans the plasma membrane with a small amino-terminal domain exposed to the cytoplasm and a large, carboxyl-terminal domain exposed to the periplasm. We have investigated which regions of leader peptidase are necessary for its assembly across the membrane. Deletions were made in the carboxyl-terminal domain of leader peptidase, removing residues 141-222, 142-323, or 222-323. Protease accessibility was used to determine whether the polar, carboxyl-terminal domains of these truncated leader peptidases were translocated across the membrane. The removal of either residues 222-323 (the extreme carboxyl terminus) or residues 141-222 does not prevent leader peptidase membrane assembly. However, leader peptidase lacking both regions, i.e. amino acid residues 142-323, cannot translocate the remaining portion of its carboxyl terminus across the membrane. Our data suggest that the polar, periplasmic domain of leader peptidase contains information which is needed for membrane assembly.     

A small hydrophobic domain anchors leader peptidase to the cytoplasmic membrane of Escherichia coli

Leader peptidase is an enzyme of the Escherichia coli cytoplasmic membrane which removes amino-terminal leader sequences from many secreted and membrane proteins. Three potential membrane-spanning segments exist in the first 98 amino acids of leader peptidase. We have characterized the topology of leader peptidase based on its sensitivity to protease digestion. Proteinase K and trypsin treatment of right-side-out inner membrane vesicles and spheroplasts yields protected fragments of approximately 80 and 105 amino acid residues, respectively. We have shown that both fragments are derived from the amino terminus of the protein and that the smaller protected peptide can be derived from the larger. Removal of the third potential membrane-spanning segment (residues 82-98) does not affect the size of the proteinase K-protected fragment but does reduce the size of the trypsin-protected peptide. Because the proteinase K-protected fragment is about 9000 daltons, is derived from the amino terminus of leader peptidase, and its size is not affected when amino acids 82-98 are removed from the protein, it must extend from the amino terminus to approximately residue 80. Likewise, the trypsin-protected fragment must extend from the amino terminus to about residue 105. These data suggest a model for the orientation of leader peptidase in which the second hydrophobic stretch (residues 62-76) spans the cytoplasmic membrane and the third hydrophobic stretch resides in the periplasmic space.     

Use of site-directed mutagenesis to define the limits of sequence variation tolerated for processing of the M13 procoat protein by the Escherichia coli leader peptidase.

Leader peptidase cleaves the leader sequence from the amino terminus of newly made membrane and secreted proteins after they have translocated across the membrane. Analysis of a large number of leader sequences has shown that there is a characteristic pattern of small apolar residues at -1 and -3 (with respect to the cleavage site) and a helix-breaking residue adjacent to the central apolar core in the region -4 to -6. The conserved sequence pattern of small amino acids at -1 and -3 around the cleavage site most likely represents the substrate specificity of leader peptidase. We have tested this by generating 60 different mutations in the +1 to -6 domain of the M13 procoat protein. These mutants were analyzed for in vivo and in vitro processing, as well as for protein insertion into the cytoplasmic membrane. We find that in vivo leader peptidase was able to process procoat with an alanine, a serine, a glycine, or a proline residue at -1 and with a serine, a glycine, a threonine, a valine, or a leucine residue at -3. All other alterations at these sites were not processed, in accordance with predictions based on the conserved features of leader peptides. Except for proline and threonine at +1, all other residues at this position were processed by leader peptidase. None of the mutations at -2, -4, or -5 of procoat (apart from proline at -4) completely abolished leader peptidase cleavage in vivo although there were large effects on the kinetics of processing.(ABSTRACT TRUNCATED AT 250 WORDS)     

Requirements for substrate recognition by bacterial leader peptidase.

Many secreted and membrane proteins have amino-terminal leader peptides which are essential for their insertion across the membrane bilayer. These precursor proteins, whether from prokaryotic or eukaryotic sources, can be processed to their mature forms in vitro by bacterial leader peptidase. While different leader peptides have shared features, they do not share a unique sequence at the cleavage site. To examine the requirements for substrate recognition by leader peptidase, we have truncated M13 procoat, a membrane protein precursor, from both the amino- and carboxy-terminal ends with specific proteases or chemical cleavage agents. The fragments isolated from these reactions were assayed as substrates for leader peptidase. A 16 amino acid residue peptide which spans the leader peptidase cleavage site is accurately cleaved. Neither the basic amino-terminal region nor most of the hydrophobic central region of the leader peptide are essential for accurate cleavage.     

Distinct domains of an oligotopic membrane protein are Sec-dependent and Sec-independent for membrane insertion.

Leader peptidase of Escherichia coli spans the plasma membrane twice with its amino terminus on the periplasmic surface of the membrane and its large carboxyl-terminal domain protruding into the periplasm. To monitor the transfer of the amino terminus of leader peptidase to the periplasm, we have constructed a fusion protein between the 18-residue amino-terminal periplasmic domain of Pf3 bacteriophage coat protein and the beginning of leader peptidase. We find that neither the SecA or SecY proteins nor a transmembrane electrochemical potential is required for insertion of the amino terminus, while the transfer of the carboxyl-terminal domain of leader peptidase has these requirements. The first 35 residues of leader peptidase, which include the first hydrophobic domain and the carboxyl-terminal positively charged cluster, are sufficient to insert the amino terminus. When positively charged residues are introduced before the first transmembrane segment, translocation of the amino terminus is abolished. These studies in protein membrane topogenesis, showing that there are different requirements for amino and carboxyl termini insertion, indicate that multiple mechanisms exist even within the same protein.     

A family of bacteriocin ABC transporters carry out proteolytic processing of their substrates concomitant with export

Lantibiotic and non-lantibiotic bacteriocins are synthesized as precursor peptides containing N-terminal extensions (leader peptides) which are cleaved off during maturation. Most non-lantibiotics and also some lantibiotics have leader peptides of the so- called double-glycine type. These leader peptides share consensus sequences and also a common processing site with two conserved glycine residues In positions -1 and 2. The double-glycine-type leader peptides are unrelated to the N-terminal signal sequences which direct proteins across the cytoplasmic membrane via the sec pathway. Their processing sites are also different from typical signal peptidase cleavage sites, suggesting that a different processing enzyme is involved. Peptide bacteriocins are exported across the cytoplasmic membrane by a dedicated ATP-binding cassette (ABC) transporter. Here we show that the ABC transporter is the maturation protease and that its proteolytic domain resides in the N-terminal part of the protein. This result demonstrates that the ABC transporter has a dual function: (i) removal of the leader peptide from its substrate, and (ii) translocation of its substrate across the cytoplasmic membrane. This represents a novel strategy for secretion of bacterial proteins.     

The internal signal sequence of Escherichia coli leader peptidase is necessary, but not sufficient, for its rapid membrane assembly

Leader peptidase of Escherichia coli, a protein of 323 residues, has three hydrophobic domains. The first, residues 1-22, is the most apolar and is followed by a polar region (23-61) which faces the cytoplasm. The second hydrophobic domain (residues 62-76) spans the membrane. The third hydrophobic domain, which has a minimal apolar character, and the polar, carboxyl-terminal two-thirds of the protein are exposed to the periplasm. Deletion of either the amino terminus (residues 4-50) or the third hydrophobic region (residues 83-98) has almost no effect on the rate of leader peptidase membrane assembly, while the second hydrophobic domain is essential for insertion (Dalbey, R., and Wickner, W. (1987) Science 235, 783-787). To further define the roles of these domains, we have replaced the normal, cleaved leader sequence of pro-OmpA and M13 procoat with regions containing either the first or second apolar domain of leader peptidase. The second apolar domain supports the translocation of OmpA or coat protein across the plasma membrane, establishing its identity as an internal, uncleaved signal sequence. In addition to this sequence, we now find that leader peptidase needs either the amino-terminal domain or the third hydrophobic domain to permit its rapid membrane assembly. These results show that, although a signal sequence is necessary for rapid membrane assembly of leader peptidase, it is not sufficient.     

Structure-function relationship of type-IV prepilin peptidase of Pseudomonas aeruginosa – a review

The bifunctional enzyme prepilin peptidase (PilD) from Pseudomonas aeruginosa is a key determinant in both type-IV pilus biogenesis and extracellular protein secretion, in its roles as a leader peptidase and MTase. It is responsible for endopeptidic cleavage of the unique leader peptides that characterize type-IV pilin precursors, as well as proteins with homologous leader sequences that are essential components of the general secretion pathway found in a variety of Gram-negative pathogens. Following removal of the leader peptides, the same enzyme is responsible for the second posttranslational modification that characterizes the type-IV pilins and their homologues, namely N-methylation of the newly exposed N-terminal amino acid residue. This review discusses some of the work begun in order to answer questions regarding the structure-function relationships of the active sites of this unique enzyme.     

Synthesis of precursor maltose-binding protein with proline in the +1 position of the cleavage site interferes with the activity of Escherichia coli signal peptidase I in vivo.

The residues occupying the -3 and -1 positions relative to the cleavage site of secretory precursor proteins are usually amino acids with small, neutral side chains that are thought to constitute the recognition site for the processing enzyme, signal peptidase. No restrictions have been established for residues positioned +1 to the cleavage site, although there have been several indications that mutant precursor proteins with a proline at +1 cannot be processed by Escherichia coli signal peptidase I (also called leader peptidase). A maltose-binding protein (MBP) species with proline at +1, designated MBP27-P, was translocated efficiently but not processed when expressed in E. coli cells. Unexpectedly, induced expression of MBP27-P was found to have an adverse effect on the processing kinetics of five different nonlipoprotein precursors analyzed, but not precursor Lpp (the major outer membrane lipoprotein) processed by a different enzyme, signal peptidase II. Cell growth also was inhibited following induction of MBP27-P synthesis. Substitutions in the MBP27-P signal peptide that blocked MBP translocation across the cytoplasmic membrane and, hence, access to the processing enzyme or that altered the signal peptidase I recognition site at position -1 restored both normal growth and processing of other precursors. Since overproduction of signal peptidase I also restored normal growth and processing to cells expressing unaltered MBP27-P, it was concluded that precursor MBP27-P interferes with the activity of the processing enzyme, probably by competing as a noncleavable substrate for the enzyme's active site. Thus, although signal peptidase I, like many other proteases, is unable to cleave an X-Pro bond, a proline at +1 does not prevent the enzyme from recognizing the normal processing site. When the RBP signal peptide was substituted for the MBP signal peptide of MBP27-P, the resultant hybrid protein was processed somewhat inefficiently at an alternate cleavage site and elicited a much reduced effect on cell growth and signal peptidase I activity. Although the MBP signal peptide also has an alternate cleavage site, the different properties of the RBP and MBP signal peptides with regard to the substitution of proline at +1 may be related to their respective secondary structures in the processing site region.     

Cysteine residues in the transmembrane regions of M13 procoat protein suggest that oligomeric coat proteins assemble onto phage progeny

The M13 phage assembles in the inner membrane of Escherichia coli. During maturation, about 2,700 copies of the major coat protein move from the membrane onto a single-stranded phage DNA molecule that extrudes out of the cell. The major coat protein is synthesized as a precursor, termed procoat protein, and inserts into the membrane via a Sec-independent pathway. It is processed by a leader peptidase from its leader (signal) peptide before it is assembled onto the phage DNA. The transmembrane regions of the procoat protein play an important role in all these processes. Using cysteine mutants with mutations in the transmembrane regions of the procoat and coat proteins, we investigated which of the residues are involved in multimer formation, interaction with the leader peptidase, and formation of M13 progeny particles. We found that most single cysteine residues do not interfere with the membrane insertion, processing, and assembly of the phage. Treatment of the cells with copper phenanthroline showed that the cysteine residues were readily engaged in dimer and multimer formation. This suggests that the coat proteins assemble into multimers before they proceed onto the nascent phage particles. In addition, we found that when a cysteine is located in the leader peptide at the -6 position, processing of the mutant procoat protein and of other exported proteins is affected. This inhibition of the leader peptidase results in death of the cell and shows that there are distinct amino acid residues in the M13 procoat protein involved at specific steps of the phage assembly process.     

Cleavage, methylation, and localization of the Pseudomonas aeruginosa export proteins XcpT, -U, -V, and -W.

Four components of the apparatus of extracellular protein secretion of Pseudomonas aeruginosa, Xcpt, -U, -V, and -W (XcpT-W), are synthesized as precursors with short N-terminal leader peptides that share sequence similarity with the pilin subunit of this organism. A specialized leader peptidase/methylase, product of the pilD gene, has been shown to cleave the leader peptide from prepilin and to methylate the N-terminal phenylalanine of the mature pilin. Antibodies were prepared against XcpT-W and used to purify each of these proteins. Sequence analysis of XcpT-W has shown that these proteins, like mature pilin, contain N-methylphenylalanine as the N-terminal amino acid. Analysis of cellular fractions from wild-type and pilD mutant strains of P. aeruginosa showed that the precursor forms of XcpT-W are located predominantly in the bacterial inner membrane, and their localization is not altered after PilD-mediated removal of the leader sequence. These studies demonstrate that the biogenesis of the apparatus of extracellular protein secretion and that of type IV pili share a requirement for PilD. This bifunctional enzyme, acting in the inner membrane, cleaves the leader peptides from precursors of pilins and XcpT-W and subsequently methylates the amino group of the N-terminal phenylalanine of each of its substrates.     

Conserved residues of the leader peptide are essential for cleavage by leader peptidase

Gene 8 of bacteriophage M13 codes for procoat, the precursor of its major coat protein. Gene 8 has been cloned into a plasmid and mutagenized. We have isolated mutants of this gene in which procoat is synthesized but is not processed to coat protein. We now describe mutants in the leader region of procoat, at positions -6, -3, and -1 with respect to the leader peptidase cleavage site. These positions are quite conserved among the leader peptides of various pre-proteins. Each of these mutant procoats is synthesized at a normal rate and inserts correctly into the plasma membrane, as judged by its accessibility to protease in intact spheroplasts. Procoat accumulates, largely in its transmembrane form, and is not cleaved to coat. In detergent extracts, the mutant procoats are very poor substrates for added leader peptidase. We conclude that these 3 residues are not conserved for insertion across the membrane but are part of an essential recognition site for the leader peptidase.     

Maturation of Escherichia coli maltose-binding protein by signal peptidase I in vivo. Sequence requirements for efficient processing and demonstration of an alternate cleavage site

Comparative analyses of a number of secretory proteins processed by eukaryotic and prokaryotic signal peptidases have identified a strongly conserved feature regarding the residues positioned -3 and -1 relative to the cleavage site. These 2 residues of the signal peptide are thought to constitute a recognition site for the processing enzyme and are usually amino acids with small, neutral side chains. It was shown previously that the substitution of aspartic acid for alanine at -3 of the Escherichia coli maltose-binding protein (MBP) signal peptide blocked maturation by signal peptidase I but had no noticeable effect or MBP translocation across the cytoplasmic membrane of its biological activity. This identified an excellent system in which to undertake a detailed investigation of the structural requirements and limitations for the cleavage site. In vitro mutagenesis was used to generate 14 different amino acid substitutions at -3 and 13 different amino acid substitutions at -1 of the MBP signal peptide. The maturation of the mutant precursor species expressed in vivo was examined. Overall, the results obtained agreed fairly well with statistically derived models of signal peptidase I specificity, except that cysteine was found to permit efficient processing when present at either -3 and -1, and threonine at -1 resulted in inefficient processing. Interestingly, it was found that substitutions at -1 which blocked processing at the normal cleavage site redirected processing, with varying efficiencies, to an alternate site in the signal peptide represented by the Ala-X-Ala sequence at positions -5 to -3. The substitution of aspartic acid for alanine at -5 blocked processing at this alternate site but not the normal site. The amino acids occupying the -5 and -3 positions in many other prokaryotic signal peptides also have the potential for constituting alternate processing sites. This appears to represent another example of redundant information contained within the signal peptide.     

Anionic phospholipids are determinants of membrane protein topology.

The orientation of many membrane proteins is determined by the asymmetric distribution of positively charged amino acid residues in cytoplasmic and translocated loops. The positive-inside rule states that loops with large amounts of these residues tend to have cytoplasmic locations. Orientations of constructs derived from the inner membrane protein leader peptidase from Escherichia coli were found to depend on the anionic phospholipid content of the membrane. Lowering the contents of anionic phospholipids facilitated membrane passage of positively charged loops. On the other hand, elevated contents of acidic phospholipids in the membrane rendered translocation more sensitive to positively charged residues. The results demonstrate that anionic lipids are determinants of membrane protein topology and suggest that interactions between negatively charged phospholipids and positively charged amino acid residues contribute to the orientation of membrane proteins.     

Characterization of the internal signal-anchor domain of Escherichia coli leader peptidase

Leader peptidase, an integral transmembrane protein of Escherichia coli, is synthesized without a cleavable amino-terminal leader peptide. Of the five domains that participate in the membrane assembly of this protein, one is an internal "signal" region. We have used oligonucleotide-directed mutagenesis to examine the properties of the internal signal that are crucial for leader peptidase assembly. For this purpose, the net charge at the amino terminus of the internal signal was changed from +2 to +1 and -1 and, at the carboxyl terminus of the signal, from 0 to -1 or +1. These mutations had no effect on the membrane assembly of leader peptidase, suggesting that the charges have little role in the signal function. The apolar core of this signal was disrupted by substitution of basic amino acids for apolar residues. Substitution of an arginyl residue at position 70, or two arginyl residues at position 67 and 69, prevented membrane assembly. However, substitution of an arginyl residue at position 66 or either arginyl or lysyl residue at position 68 was without effect. Thus, while the apolar character of the internal signal is important, the precise position of a charged residue determines its effect on assembly.     

Identification of amino acids in the leader peptide of Methanococcus voltae preflagellin that are important in posttranslational processing

Archaeal flagellins are made initially as preproteins with short, positively charged leader peptides. Analysis of all available archaeal preflagellin sequences indicates that the -1 position is always held by a glycine while the -2 and -3 positions are almost always held by charged amino acids. To evaluate the importance of these and other amino acids in the leader peptides of archaeal flagellins for processing by a peptidase, Methanococcus voltae mutant FlaB2 preflagellin genes were generated by PCR and the proteins tested in a methanogen preflagellin peptidase assay that detects the removal of the leader peptide from preflagellin. When the -1 position was changed from glycine to other amino acids tested, no cleavage was observed by the peptidase, with the exception of a change to alanine at which poor, partial processing was observed. Amino acid substitutions at the -2 lysine position resulted in a complete loss of processing by the peptidase, while changes at the -3 lysine resulted in partial processing. A mutant preflagellin with a leader peptide shortened from 12 amino acids to 6 amino acids was not processed. When the invariant glycine residue present at position +3 was changed to a valine, no processing of this mutant preflagellin was observed. The identification of critical amino acids in FlaB2 required for proper processing suggests that a specific preflagellin peptidase may cleave archaeal flagellins by recognition of a conserved sequence of amino acids.     

Maturation and secretion of the non-typable Haemophilus influenzae HMW1 adhesin: roles of the N-terminal and C-terminal domains

Non-typable Haemophilus influenzae is a common cause of human disease and initiates infection by colonizing the upper respiratory tract. The non-typable H. influenzae HMW1 and HMW2 adhesins mediate attachment to human epithelial cells, an essential step in the process of colonization. HMW1 and HMW2 have an unusual N-terminus and undergo cleavage of a 441-amino-acid N-terminal fragment during the course of their maturation. Following translocation across the outer membrane, they remain loosely associated with the bacterial surface, except for a small amount that is released extracellularly. In the present study, we localized the signal sequence to the first 68 amino acids, which are characterized by a highly charged region from amino acids 1-48, followed by a more typical signal peptide with a predicted leader peptidase cleavage site after the amino acid at position 68. Additional experiments established that the SecA ATPase and the SecE translocase are essential for normal export and demonstrated that maturation involves cleavage first between residues 68 and 69, via leader peptidase, and next between residues 441 and 442. Site-directed mutagenesis revealed that HMW1 processing, secretion and extracellular release are dependent on amino acids in the region between residues 150 and 166 and suggested that this region interacts with the HMW1B outer membrane translocator. Deletion of the C-terminal end of HMW1 resulted in augmented extracellular release and elimination of HMW1-mediated adherence, arguing that the C-terminus may serve to tether the adhesin to the bacterial surface. These observations suggest that the HMW proteins are secreted by a variant form of the general secretory pathway and provide insight into the mechanisms of secretion of a growing family of Gram-negative bacterial exoproteins.