Sequencing batch membrane biofilm reactor for simultaneous nitrogen and phosphorus removal: novel application of membrane-aerated biofilm

A sequencing batch membrane biofilm reactor (SBMBfR) was developed for simultaneous carbon, nitrogen, and phosphorus removal from wastewater. This reactor was composed of two functional parts: (1) a gas-permeable membrane on which a nitrifying biofilm formed and (2) a bulk solution in which bacteria, mainly denitrifying polyphosphate-accumulating organisms (DNPAOs), were suspended. The reactor was operated sequentially under anaerobic condition and then under membrane aeration condition in one cycle. During the anaerobic period, organic carbon was consumed by DNPAOs; this was accompanied by phosphate release. During the subsequent membrane aeration period, nitrifying bacteria utilized oxygen supplied directly to them from the inside of the membrane. Consequently, the nitrite and nitrate products diffused into the bulk solution, where they were used by DNPAOs as electron acceptors for phosphate uptake. In a long-term sequencing batch operation, the mean removal efficiencies of total organic carbon (TOC), total nitrogen (T-N), and total phosphorus (T-P) under steady-state condition were 99%, 96%, and 90%, respectively. In addition, fluorescence in situ hybridization (FISH) clearly demonstrated the difference in bacterial community structure between the membrane biofilm and the suspended sludge: ammonia-oxidizing bacteria belonging to the Nitrosomonas group were dominant in the region adjacent to the membrane throughout the operation, and the occupation ratio of the well-known polyphosphate-accumulating organism (PAO) Candidatus "Accumulibacter phosphates" in the suspended sludge gradually increased to a maximum of 37%.     

Recolonization of laser-ablated bacterial biofilm

The recolonization of laser-ablated bacterial monoculture biofilm was studied in the laboratory by using a flow-cytometer system. The marine biofilm-forming bacterium Pseudoalteromonas carrageenovora was used to develop biofilms on titanium coupons. Upon exposure to a low-power pulsed irradiation from an Nd:YAG laser, the coupons with biofilm were significantly reduced both in terms of total viable count (TVC) and area cover. The energy density used for a pulse of 5 ns was 0.1 J/cm(2) and the durations of irradiation exposure were 5 and 10 min. When placed in a flow of dilute ZoBell marine broth medium (10%) the laser-destructed bacterial film in a flow-cytometer showed significant recovery over a period of time. The flow of medium was regulated at 3.2 ml/min. The increase in area cover and TVC, however, was significantly less than that observed for nonirradiated control (t-test, P< 0.05). The coupons were observed for biofilm area cover and TVC at different intervals (3, 6, and 9 h) after irradiation. While the biofilm in the control coupon at the end of 9 h of exposure showed 95.6 +/- 4.1% cover, the 5- and 10-min irradiated samples after 9 h showed 60.3 +/- 6.5 and 37.4 +/- 12.1% area cover, respectively. The reduced rate of recolonization compared to control was thought be due to the lethal and sublethal impacts of laser irradiation on bacteria. This observation thus provided data on the online recolonization speed of biofilm, which is important when considering pulsed laser irradiation as an ablating technique of biofilm formation and removal in natural systems.     

Candida albicans biofilm formation is associated with increased anti-oxidative capacities

Candida albicans is a common, opportunistic, human fungal pathogen that causes a variety of mucosal and systemic afflictions. It exists in nature both in the biofilm or the sessile phase, as well as in the free-floating or the planktonic phase. Candida biofilms, in particular, display unique characteristics that confer survival advantages over their planktonic counterparts, such as their recalcitrance to common antifungals. The mechanisms underlying Candida biofilm formation and their attributes are poorly understood. In this study, we used a 2-DE-based approach to characterize the protein markers that are differentially expressed in Candida biofilms in comparison to their planktonic counterparts. Using tandem mass spectrometric analysis, we have identified a significant number of proteins including alkyl hydroperoxide reductase, thioredoxin peroxidase, and thioredoxin involved in oxidative stress defenses that are upregulated in the biofilm phase. These proteomic findings were further confirmed by real-time PCR and lucigenin-based chemiluminescence assays. In addition, we demonstrate that a drug target for the new antifungal agent echinocandin, is abundantly expressed and significantly upregulated in Candida biofilms. Taken together, these data imply that the biofilm mode, Candida, compared with their planktonic counterparts, exhibits traits that can sustain oxidative stress (anti-oxidants), and thereby exert resistance to commonly used antifungals.     

Tracer measurements reveal experimental evidence of biofilm consolidation

The ability to simultaneously measure both biofilm thickness and the mass transfer coefficient of an inert tracer through it provides a powerful method to study biofilm development. In this communication previously published data has been collated to interpret global trends in biofilm structure during the transition towards steady-state. It appears that sudden changes in biofilm structure (directly related to the rate of change of biofilm mass transfer resistance) may occur following transitions in rate of biomass production. These observations are consistent with the concept of consolidation, recently introduced into spatially structured biofilm mathematical models to account for structural realignment of the biofilm under dynamic conditions.     

Bio-reductive dechlorination of 1,1,1-trichloroethane and chloroform using a hydrogen-based membrane biofilm reactor

A H(2)-based, denitrifying and sulfate-reducing membrane biofilm reactor (MBfR) was effective for removing 1,1,1-trichloroethane (TCA) and chloroform (CF) by reductive dechlorination. When either TCA or CF was first added to the MBfR, reductive dechlorination took place immediately and then increased over 3 weeks, suggesting enrichment for TCA- or CF-dechlorinating bacteria. Increasing the H(2) pressure increased the dechlorination rates of TCA or CF, and it also increased the rate of sulfate reduction. Increased sulfate loading allowed more sulfate reduction, and this competed with reductive dechlorination, particularly the second steps. The acceptor flux normalized by effluent concentration can be an efficient indicator to gauge the intrinsic kinetics of the MBfR biofilms for the different reduction reactions. The analysis of normalized rates showed that the kinetics for reductive-dechlorination reactions were slowed by reduced H(2) bio-availability caused by a low H(2) pressure or competition from sulfate reduction.     

Characterization of a biofilm membrane reactor and its prospects for fine chemical synthesis

Biofilms are known to be robust biocatalysts. Conventionally, they have been mainly applied for wastewater treatment, however recent reports about their employment for chemical synthesis are increasingly attracting attention. Engineered Pseudomonas sp. strain VLB120ΔC biofilm growing in a tubular membrane reactor was utilized for the continuous production of (S)‐styrene oxide. A biofilm specific morphotype appeared in the effluent during cultivation, accounting for 60–80% of the total biofilm irrespective of inoculation conditions but with similar specific activities as the original morphotype. Mass transfer of the substrate styrene and the product styrene oxide was found to be dependent on the flow rate but was not limiting the epoxidation rate. Oxygen was identified as one of the main parameters influencing the biotransformation rate. Productivity was linearly dependent on the specific membrane area and on the tube wall thickness. On average volumetric productivities of 24 g L day^?1 with a maximum of 70 g L day^?1 and biomass concentrations of 45 g_BDW L have been achieved over long continuous process periods (≥50 days) without reactor downtimes. Biotechnol. Bioeng. 2010. 105: 705–717. © 2009 Wiley Periodicals, Inc.     

Rapid depletion of dissolved oxygen in 96‐well microtiter plate Staphylococcus epidermidis biofilm assays promotes biofilm development and is influenced by inoculum cell concentration

Biofilm‐related research using 96‐well microtiter plates involves static incubation of plates indiscriminate of environmental conditions, making oxygen availability an important variable which has not been considered to date. By directly measuring dissolved oxygen concentration over time we report here that dissolved oxygen is rapidly consumed in Staphylococcus epidermidis biofilm cultures grown in 96‐well plates irrespective of the oxygen concentration in the gaseous environment in which the plates are incubated. These data indicate that depletion of dissolved oxygen during growth of bacterial biofilm cultures in 96‐well plates may significantly influence biofilm production. Furthermore higher inoculum cell concentrations are associated with more rapid consumption of dissolved oxygen and higher levels of S. epidermidis biofilm production. Our data reveal that oxygen depletion during bacterial growth in 96‐well plates may significantly influence biofilm production and should be considered in the interpretation of experimental data using this biofilm model. Biotechnol. Bioeng. 2009;103: 1042–1047. © 2009 Wiley Periodicals, Inc.     

Xanthan degragation by biofilm in porous media

Biological activity in oil reservoirs can cause significant problems such as souring and plugging. This study focuses on the problem of polymer degradation and permeability reduction due to biofilm formation during polymer injection for improved oil recovery. Polymers are included in injection fluids to increase their viscosity. Results relating biological processes and polymer degradation to fluid‐dynamic conditions in a laboratory model porous medium are presented.

A transparent flow cell with an etched two‐dimensional network of pores served as a model porous medium. A sterile xanthan polymer and natural sea water solution were continuously injected into the porous medium. A bacterial culture capable of xanthan degradation was introduced into the cell by a single injection. Some of the cells from this culture attached to the pore walls forming an immobile bacterial culture, termed biofilm. The development of this biofilm, its xanthan degradation and its effect on permeability were measured.

The effects of injection rate and rate transitions were analyzed. Injection fluid viscosity was reduced by 30% after 5 min flow through the porous medium at the maximum steady state degradation rate observed. Permeability was significantly reduced by the xanthan degrading biofilm, causing an increase in pressure drop through the porous medium of up to 80%. Polymer injection in oil reservoirs may, therefore, have negative effects on oil recovery, unless efficient biofouling control is applied. The methodology presented may serve as a tool in the development of biofouling control measures in porous media.     

L-Tryptophan prevents Escherichia coli biofilm formation and triggers biofilm degradation

The effect of deletion of trp operon and tna operon on the Escherichia coli biofilm formation was investigated in order to elucidate the role of L-tryptophan metabolism in biofilm formation. trp operon deletion mutants ΔtrpC, ΔtrpD and ΔtrpE deficient in L-tryptophan biosynthesis showed higher biofilm formation. In addition, ΔtnaC with increased L-tryptophan degradation activity showed higher biofilm formation. On the contrary, ΔtnaA deletion mutant which lost L-tryptophan degradation activity showed low biofilm formation. From these results, it was suggested that decrease of intracellular L-tryptophan level induced biofilm formation and increase of L-tryptophan repressed biofilm formation. So the effect of the addition of L-tryptophan to the medium on the E. coli biofilm formation was investigated. L-Tryptophan addition at starting culture decreased biofilm formation and furthermore L-tryptophan addition after 16 h culture induced the degradation of preformed biofilm. From the above results, it was suggested that maintenance of high intracellular L-tryptophan concentration prevents E. coli biofilm formation and elevation of intracellular L-tryptophan concentration triggers degradation of matured biofilm.     

Comparative proteome analysis of Staphylococcus aureus biofilm and planktonic cells and correlation with transcriptome profiling

Pathogenic staphylococci can form biofilms in which they show a higher resistance to antibiotics and the immune defense system than their planktonic counterparts, which suggests that the cells in a biofilm have an altered metabolic activity. Here, 2-D PAGE was used to identify secreted, cell wall-associated and cytoplasmic proteins expressed in Staphylococcus aureus after 8 and 48 h of growth. The proteins were separated at pH ranges of 4-7 or 6-11. The protein patterns revealed significant differences in 427 protein spots; from these, 258 non-redundant proteins were identified using ESI-MS/MS. Biofilm cells expressed higher levels of proteins associated with cell attachment and peptidoglycan synthesis, and in particular fibrinogen-binding proteins. Enzymes involved in pyruvate and formate metabolism were upregulated. Furthermore, biofilm cells expressed more staphylococcal accessory regulator A protein (SarA), which corroborates the positive effect of SarA on the expression of the intercellular adhesion operon ica and biofilm growth. In contrast, proteins, such as proteases and particularly immunodominant antigen A (IsaA) and staphylococcal secretory antigen (SsaA), were found in lower amounts. The RNA expression profiling largely supports the proteomic data. The results were mapped onto KEGG pathways.     

The effect of biofilm permeability on bio-clogging of porous media

A 3D Biofilm model, appropriate for complex porous media support structures, is successfully modified such that non‐zero permeability of biofilms structures is enabled. A systematic study is then conducted into the influence of biofilm permeability on overall biomass growth rate. This reveals a significant influence at large biofilm concentrations; even when the permeability of the biomass is 1.25% of that of the free pore space, biomass accumulation increased by a factor of ～3 over 40 h. The effect is shown to be retained when allowing for biomass detachment or erosion as a consequence of adjacent velocity shear. We conclude that biofilm permeability should be included in biofilm models and that further experimental work is required to better describe the link between biofilm permeability and local microstructure. Biotechnol. Bioeng. 2012; 109:1031–1042. © 2011 Wiley Periodicals, Inc.     

Non-invasive self-referencing electrochemical sensors for quantifying real-time biofilm analyte flux

Current techniques for characterizing biofilm physiology lack the signal filtering capability required for quantifying signals associated with real time biologically active transport. Though a great deal was learned from previous investigations, no results have been reported on the characterization of in vivo, real time biofilm flux using non-invasive (non-destructive) techniques. This article introduces the self-referencing technique for applications in biofilm physiology. Self-referencing is a non-invasive sensing modality which is capable of sensing changes in biologically active analyte flux as small as 10 fmol cm(-2) s(-1). Studies directly characterizing flux, as opposed to concentration, have the advantage of quantifying real time changes in biologically active transport which are otherwise lost to background noise. The use of this modality for characterizing biofilm physiology is validated with a reversible enzyme inhibition study. The experiment used self-referencing potentiometric sensors for quantifying real time ammonium and nitrite flux. Amperometric and optical sensing methods, though not presented herein, are also powerful sensing tools which benefit from operation in self-referencing mode. Reversible ammonia monooxygenase inhibition by a copper chelator (thiourea), and subsequent relief by excess copper addition was successfully demonstrated using self-referencing ion-selective microelectrodes for a mature Nitrosomonas europaea biofilm.     

Effect of biofilm growth on steady-state biofilm models

The results of numerical simulations for a growing biological film are presented to justify the use of steady-state biofilm models for approximating the behavior of both unlimited and shear-limited biofilms. For an unlimited biofilm we show that although the total biofilm thickness may continue to increase over time, the active biofilm volume will reach a constant value. We also show that the profile of active microorganisms within the biofilm will become constant with respect to the biofilm/fluid interface and simply move outward as the biofilm thickness increases. For a shear-limited biofilm we similarly show that once a "limiting" thickness has been reached the active biofilm volume, substrate consumption, and profile of active microorganisms within the biofilm will also be independent of the biofilm thickness.