Enzymatic synthesis of β‐glucosylglycerol using a continuous‐flow microreactor containing thermostable β‐glycoside hydrolase CelB immobilized on coated microchannel walls

β‐Glucosylglycerol (βGG) has potential applications as a moisturizing agent in cosmetic products. A stereochemically selective method of its synthesis is kinetically controlled enzymatic transglucosylation from a suitable donor substrate to glycerol as acceptor. Here, the thermostable β‐glycosidase CelB from Pyrococcus furiosus was used to develop a microstructured immobilized enzyme reactor for production of βGG under conditions of continuous flow at 70°C. Using CelB covalently attached onto coated microchannel walls to give an effective enzyme activity of 30 U per total reactor working volume of 25 µL, substrate conversion and formation of transglucosylation product was monitored in dependence of glucosyl donor (2‐nitrophenyl‐β‐D ‐glucoside (oNPGlc), 3.0 or 15 mM; cellobiose, 250 mM), the concentration of glycerol (0.25–1.0 M), and the average residence time (0.2–90 s). Glycerol caused a concentration‐dependent decrease in the conversion of the glucosyl donor via hydrolysis and strongly suppressed participation of the substrate in the reaction as glucosyl acceptor. The yields of βGG were ≥80% and ≈60% based on oNPGlc and cellobiose converted, respectively, and maintained up to near exhaustion of substrate (≥80%), giving about 120 mM (30 g/L) of βGG from the reaction of cellobiose and 1 M glycerol. The structure of the transglucosylation products, 1‐O‐β‐D ‐glucopyranosyl‐rac‐glycerol (79%) and 2‐O‐β‐D ‐glucopyranosyl‐sn‐glycerol (21%), was derived from NMR analysis of the product mixture of cellobiose conversion. The microstructured reactor showed conversion characteristics similar to those for a batchwise operated stirred reactor employing soluble CelB. The advantage of miniaturization to the microfluidic format lies in the fast characterization of full reaction time courses for a range of process conditions using only a minimum amount of enzyme. Biotechnol. Bioeng. 2009;103: 865–872. © 2009 Wiley Periodicals, Inc.     

Confirming therapeutic target of protopine using immobilized β2‐adrenoceptor coupled with site‐directed molecular docking and the target‐drug interaction by frontal analysis and injection amount–dependent method

Drug‐protein interaction analysis is pregnant in designing new leads during drug discovery. We prepared the stationary phase containing immobilized β₂‐adrenoceptor (β ₂‐ AR) by linkage of the receptor on macroporous silica gel surface through N ,N ′‐carbonyldiimidazole method. The stationary phase was applied in identifying antiasthmatic target of protopine guided by the prediction of site‐directed molecular docking. Subsequent application of immobilized β ₂‐ AR in exploring the binding of protopine to the receptor was realized by frontal analysis and injection amount–dependent method. The association constants of protopine to β ₂‐ AR by the 2 methods were (1.00 ± 0.06) × 10⁵M⁻¹ and (1.52 ± 0.14) × 10⁴M⁻¹. The numbers of binding sites were (1.23 ± 0.07) × 10⁻⁷M and (9.09 ± 0.06) × 10⁻⁷M, respectively. These results indicated that β ₂‐ AR is the specific target for therapeutic action of protopine in vivo. The target‐drug binding occurred on Ser¹⁶⁹ in crystal structure of the receptor. Compared with frontal analysis, injection amount–dependent method is advantageous to drug saving, improvement of sampling efficiency, and performing speed. It has grave potential in high‐throughput drug‐receptor interaction analysis.     

Development of MoS2–CNT Composite Thin Film from Layered MoS2 for Lithium Batteries

Layered MoS₂ prepared by liquid‐phase exfoliation has been blended with single‐walled carbon nanotubes (SWNTs) to form novel composite thin films for lithium battery applications. The films were formed by vacuum filtration of blended dispersions onto nitrocellulose membranes. The resulting composite films were transferred onto Cu foil electrodes via a facile filtration/wet transfer technique from nitrocellulose membranes. The morphology of the film was characterised by field emission scanning electron microscopy, which suggests that the MoS₂‐SWNT composite film shows good adherence to the Cu foil substrate. The MoS₂‐SWNT composite thin films show strong electrochemical performance at different charge‐discharge rates. The capacity of a MoS₂‐SWNT composite film with thickness of 1 μm is approximately 992 mAh g^?1 after 100 cycles. The morphology study showed that the MoS₂‐SWNT thin film retains structural integrity after 100 cycles, while the MoS₂ thin film without SWNTs displays significant cracking. In addition, the novel composite thin film preparation and transfer protocols developed in this study could be extended to the preparation of various layered‐material‐based composite films, with the potential for new device designs for energy applications.     

Exceptionally Enhanced Electrode Activity of (Pr,Ce)O2−δ‐Based Cathodes for Thin‐Film Solid Oxide Fuel Cells

It is shown that an electrochemically‐driven oxide overcoating substantially improves the performance of metal electrodes in high‐temperature electrochemical applications. As a case study, Pt thin films are overcoated with (Pr,Ce)O_2?δ (PCO) by means of a cathodic electrochemical deposition process that produces nanostructured oxide layers with a high specific surface area and uniform metal coverage and then the coated films are examined as an O₂‐electrode for thin‐film‐based solid oxide fuel cells. The combination of excellent conductivity, reactivity, and durability of PCO dramatically improves the oxygen reduction reaction rate while maintaining the nanoscale architecture of PCO layers and thus the performance of the PCO‐coated Pt thin‐film electrodes at high temperatures. As a result, with an oxide coating step lasting only 5 min, the electrode resistance is successfully reduced by more than 1000 times at 500 °C in air. These observations provide a new direction for the design of high‐performance electrodes for high‐temperature electrochemical cells.     

Temporal trends in N2O flux dynamics in a Danish wetland – effects of plant‐mediated gas transport of N2O and O2 following changes in water level and soil mineral‐N availability

Temporal trends of N₂O fluxes across the soil–atmosphere interface were determined using continuous flux chamber measurements over an entire growing season of a subsurface aerating macrophyte (Phalaris arundinacea) in a nonmanaged Danish wetland. Observed N₂O fluxes were linked to changes in subsurface N₂O and O₂ concentrations, water level (WL), light intensity as well as mineral‐N availability. Weekly concentration profiles showed that seasonal variations in N₂O concentrations were directly linked to the position of the WL and O₂ availability at the capillary fringe above the WL. N₂O flux measurements showed surprisingly high temporal variability with marked changes in fluxes and shifts in flux directions from net source to net sink within hours associated with changing light conditions. Systematic diurnal shifts between net N₂O emission during day time and deposition during night time were observed when max subsurface N₂O concentrations were located below the root zone. Correlation (P < 0.001) between diurnal variations in O₂ concentrations and incoming photosynthetically active radiation highlighted the importance of plant‐driven subsoil aeration of the root zone and the associated controls on coupled nitrification/denitrification. Therefore, P. arundinacea played an important role in facilitating N₂O transport from the root zone to the atmosphere, and exclusion of the aboveground biomass in flux chamber measurements may lead to significant underestimations on net ecosystem N₂O emissions. Complex interactions between seasonal changes in O₂ and mineral‐N availability following near‐surface WL fluctuations in combination with plant‐mediated gas transport by P. arundinacea controlled the subsurface N₂O concentrations and gas transport mechanisms responsible for N₂O fluxes across the soil–atmosphere interface. Results demonstrate the necessity for addressing this high temporal variability and potential plant transport of N₂O in future studies of net N₂O exchange across the soil–atmosphere interface.     

Characterization of the interaction of a mono‐6‐thio‐β‐cyclodextrin‐capped CdTe quantum dots–methylene blue/methylene green system with herring sperm DNA using a spectroscopic approach

Novel, water‐soluble CdTe quantum dots (QDs) capped with β‐cyclodextrin (β‐CD) and ~ 4.0 nm in diameter were synthesized in aqueous solution, and characterized using transmission electron microscopy (TEM). A fluorescence‐sensing system based on the photoinduced electron transfer (PET) of (mono‐6‐thio‐β‐CD)–CdTe QDs was then designed to measure the interaction of phenothiazine dyes [methylene blue (MB) and methylene green (MG)] with herring sperm DNA (hsDNA). This fluorescence‐sensing system was based on a fluorescence “OFF–ON” mode. First, MB/MG adsorbed on the surface of (mono‐6‐thio‐β‐CD)–CdTe QDs effectively quenches the fluorescence of (mono‐6‐thio‐β‐CD)–CdTe QDs through PET. Then, addition of hsDNA restores the fluorescence intensity of (mono‐6‐thio‐β‐CD)–CdTe QDs, because hsDNA can bind with MB/MG and remove it from the as‐prepared (mono‐6‐thio‐β‐CD)–CdTe QDs. In addition, detailed reaction mechanisms of the (mono‐6‐thio‐β‐CD)–CdTe QDs–MB/MG–hsDNA solution system were studied using optical methods, by comparison with the TGA–CdTe QDs–MB/MG–hsDNA solution system. Copyright © 2014 John Wiley & Sons, Ltd.     

Biosilica‐loaded poly(ϵ‐caprolactone) nanofibers mats provide a morphogenetically active surface scaffold for the growth and mineralization of the osteoclast‐related SaOS‐2 cells

Bioprinting/3D cell printing procedures for the preparation of scaffolds/implants have the potential to revolutionize regenerative medicine. Besides biocompatibility and biodegradability, the hardness of the scaffold material is of critical importance to allow sufficient mechanical protection and, to the same extent, allow migration, cell–cell, and cell–substrate contact formation of the matrix‐embedded cells. In the present study, we present a strategy to encase a bioprinted, cell‐containing, and soft scaffold with an electrospun mat. The electrospun poly(?‐caprolactone) (PCL) nanofibers mats, containing tetraethyl orthosilicate (TEOS), were subsequently incubated with silicatein. Silicatein synthesizes polymeric biosilica by polycondensation of ortho‐silicate that is formed from prehydrolyzed TEOS. Biosilica provides a morphogenetically active matrix for the growth and mineralization of osteoblast‐related SaOS‐2 cells in vitro. Analysis of the microstructure of the 300–700 nm thick PCL/TEOS nanofibers, incubated with silicatein and prehydrolyzed TEOS, displayed biosilica deposits on the mats formed by the nanofibers. We conclude and propose that electrospun PCL nanofibers mats, coated with biosilica, may represent a morphogenetically active and protective cover for bioprinted cell/tissue‐like units with a suitable mechanical stability, even if the cells are embedded in a softer matrix.     

Luminescence enhancement of (Sr1–xMx)2SiO4:Eu2+ phosphors with M (Ca2+/Zn2+) partial substitution for white light‐emitting diodes

Eu²⁺‐doped Sr₂SiO₄ phosphor with Ca²⁺/Zn²⁺ substitution, (Sr_1–xM_x)₂SiO₄:Eu²⁺ (M = Ca, Zn), was prepared using a high‐temperature solid‐state reaction method. The structure and luminescence properties of Ca²⁺/Zn²⁺ partially substituted Sr₂SiO₄:Eu²⁺ phosphors were investigated in detail. With Ca²⁺ or Zn²⁺ added to the silicate host, the crystal phase could be transformed between the α‐form and the β‐form of the Sr₂SiO₄ structure. Under UV excitation at 367 nm, all samples exhibit a broad band emission from 420 to 680 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions. The broad emission band consists of two peaks at 482 and 547 nm, which correspond to Eu²⁺ ions occupying the ten‐fold oxygen‐coordinated Sr.(I) site and the nine‐fold oxygen‐coordinated Sr.(II) site, respectively. The luminescence properties, including the intensity and lifetime of Sr₂SiO₄:Eu²⁺ phosphors, improved remarkably on Ca²⁺/Zn²⁺ addition, and promote its application in white light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.