Realized evolvability: quantifying phenotypic evolution in a Drosophila clade

Understanding the evolutionary potential of morphological evolution is still a major problem in evolutionary biology. In this study, we tried to quantify the amount of variation of different traits among species of a Drosophila clade reared under standard conditions. Nineteen different traits have been measured on nine species of the same clade, the Neotropical saltans group of Drosophila. Measured traits can be distributed into five categories: size‐traits (wing and thorax), shape indices (ratios among the size traits), number of sternopleural bristles on the thorax, number of abdominal bristles on successive sternites, and dorsal pigmentation of abdomen. All species are of medium size with a generally dark pigmentation. A remarkable feature is the presence of numerous bristles on the 6th sternite of the males, while this segment is bare in other Drosophila species. A multivariate analysis revealed that it was possible to discriminate all the investigated species by using the complete set of measured traits. For each trait, phenotypic variability was investigated at the within‐ and between‐species levels. As a rule, the interspecific coefficient of variation (CV) was much greater than the within species CV, and it is proposed to call it realized evolvability. All possible correlations were calculated between traits across species, providing many unexpected results. Size traits were highly correlated among them, but not correlated with shape indices. Abdominal traits (bristles and pigmentation) were correlated, but often in opposite directions, with thoracic shape indices. Tergite pigmentation was negatively correlated with bristle number on sternite. For the moment, most of the correlations cannot be explained by developmental processes or parallel selective pressures. Nonetheless, mapping the evolution of the two characters on a molecular phylogeny of the studied species revealed two opposite phylogenetic trends for abdominal pigmentation and setation, respectively. Our data suggest a need for similar studies in other well‐defined Drosophila clades.     

Quantitative morphometrical analysis of a North African population of <Emphasis Type="Italic">Drosophila melanogaster</Emphasis>: sexual dimorphism,and comparison with European populations

Genetic variability of quantitative traits was investigated in aMoroccan population of Drosophila melanogaster, with an isofemale line design. Results were compared with data previously obtained from French populations. Although the environmental and thermal conditions are very different in France and Morocco, only two significant differences were observed: a shorter wing and a lighter abdomen pigmentation in Morocco. It is, therefore, concluded that Moroccan D. melanogaster are quite typical temperate flies, belonging to the Palaearctic region, and very different from the ancestral Afrotropical populations. Almost all traits were genetically variable, as shown by significant intraclass correlations among lines. Genetic correlations were highly significant among three size-related traits, while much lower between size and bristle numbers. Fluctuating asymmetry was greater for abdominal bristles than for sternopleural bristles. Sex dimorphism, analysed as a female/male ratio, was identical in French and Moroccan populations. Examination of the thorax length/thorax width ratio showed that the thorax is more elongated in females. Sexual dimorphism of wing length was significantly more correlated to thorax width than to thorax length. The results illustrate the value of measuring numerous quantitative traits on the same flies for characterizing the genetic architecture of a natural population. In several cases, and especially for genetic correlations, some interesting suggestions could be made, which should be confirmed, or invalidated, by more extensive investigations.     

Phenotypic plasticity in Drosophila cactophilic species: the effect of competition,density, and breeding sites

Changes in the environmental conditions experienced by naturally occurring populations are frequently accompanied by changes in adaptive traits allowing the organism to cope with environmental unpredictability. Phenotypic plasticity is a major aspect of adaptation and it has been involved in population dynamics of interacting species. In this study, phenotypic plasticity (i.e., environmental sensitivity) of morphological adaptive traits were analyzed in the cactophilic species Drosophila buzzatii and Drosophila koepferae (Diptera: Drosophilidae) considering the effect of crowding conditions (low and high density), type of competition (intraspecific and interspecific competition) and cacti hosts (Opuntia and Columnar cacti). All traits (wing length, wing width, thorax length, wing loading and wing aspect) showed significant variation for each environmental factor considered in both Drosophila species. The phenotypic plasticity pattern observed for each trait was different within and between these cactophilic Drosophila species depending on the environmental factor analyzed suggesting that body size‐related traits respond almost independently to environmental heterogeneity. The effects of ecological factors analyzed in this study are discussed in order to elucidate the causal factors investigated (type of competition, crowding conditions and alternative host) affecting the election of the breeding site and/or the range of distribution of these cactophilic species.     

Reaction norms across and genetic parameters at different temperatures for thorax and wing size traits in Drosophila aldrichi and D. buzzatii

Reaction norms across seven constant and one fluctuating temperature of development were measured for thorax length and several wing size traits for up to 10 isofemale lines of each of the cactophilic Drosophila species, D. aldrichi and D. buzzatii, originating from the same locality. Maximum thorax length was reached at different low to intermediate temperatures for the two species, whereas wing length was highest at the lowest temperature in both species. Various ratio parameters showed pronounced species differences. The reaction norm for the wing loading index (wing length/thorax length) decreased monotonically with temperature in both species, but was much steeper and spanned a wider range in D. aldrichi than in D. buzzatii, suggesting either that wing loading is not a good characterization of flight capacity or, more likely, that flight optimization does not occur in the same manner in both species. The vein ratio (distal length/proximal length of the third vein) increased with temperature in D. buzzatii but decreased in D. aldrichi. Wing development in the two species thus is very different, with the proximal part of the wing in D. buzzatii more closely allied to the thorax than to the distal part. Among line variation was significant for all traits in both species, and most pronounced for thorax length and the ratio parameters. Coefficients of variation were significantly different between the species for all traits, with those in D. aldrichi higher than in D. buzzatii. Genetic variance in plasticity was significant for all traits in D. buzzatii, but only for seven out of 12 in D. aldrichi. Additive genetic variances for all traits in both species were significantly larger than zero. Genetic correlations between thorax length and several wing length parameters, and between these and wing area, were positive and generally significant in both species. The genetic correlation between the distal and the proximal length of the third vein was not significantly different from zero in D. aldrichi, but negative and significant in D. buzzatii. Heritabilites varied significantly among temperatures for almost all traits in both species. Phenotypic variances were generally higher in D. aldrichi than in D. buzzatii, and commonly highest at the extreme temperatures in the former species. At the high temperature the genetic variances also were usually highest in D. aldrichi. The data clearly suggest that the process of thermal adaptation is species specific and caution against generalizations based on the study of single species.     

Genetic variation and plasticity of thorax length and wing length in Drosophila aldrichi and D. buzzatii

Reaction norms across three temperatures of development were measured for thorax length, wing length and wing length/thorax length ratio for ten isofemale lines from each of two populations of Drosophila aldrichi and D. buzzatii. Means for thorax and wing length in both species were larger at 24 °C than at either 18 °C or 31 °C, with the reduction in size at 18 °C most likely due to a nutritional constraint. Although females were larger than males, the sexes were not different for wing length/thorax length ratio. The plasticity of the traits differed between species and between populations of each species, with genetic variation in plasticity similar for the two species from one locality, but much higher for D. aldrichi from the other. Estimates of heritabilities for D. aldrichi generally were higher at 18 °C and 24 °C than at 31 °C, but for D. buzzatii they were highest at 31 °C, although heritabilities were not significantly different between species at any temperature. Additive genetic variances for D. aldrichi showed trends similar to that for heritability, being highest at 18 °C and decreasing as temperature increased. For D. buzzatii, however, additive genetic variances were lowest at 24 °C. These results are suggestive that genetic variation for body size characters is increased in more stressful environments. Thorax and wing lengths showed significant genetic correlations that were not different between the species, but the genetic correlations between each of these traits and their ratio were significantly different. For D. aldrichi, genetic variation in the wing length/thorax length ratio was due primarily to variation in thorax length, while for D. buzzatii, it was due primarily to variation in wing length. The wing length/thorax length ratio, which is the inverse of wing loading, decreased linearly as temperature increased, and it is suggested that this ratio may be of greater adaptive significance than either of its components.     

Variation of life-history and morphometrical traits in Drosophila buzzatii and Drosophila simulans collected along an altitudinal gradient from a Canary island

Variation in three life‐history traits (developmental time, preadult viability and daily female productivity) and five morphometrical traits (thorax length, wing length, wing width, wing/thorax ratio and wing‐aspect ratio) was studied at three developmental temperatures (20, 25 and 30 °C) in Drosophila buzzatii and Drosophila simulans collected on the island of La Gomera (Canary Archipelago). The flies originated from five closely situated localities, representing different altitudes (from 20 to 886 m above sea level) and a range of climatic conditions. We found statistically significant population effects for all traits in D. buzzatii and for most of the traits in D. simulans. Although no correlations of trait values with altitude were detected, geographical patterns for three life‐history traits and body size in D. buzzatii indicated that short‐range geographical variation in this species could be maintained by local climatic selection. Five of eight traits showed population‐by‐temperature interactions either in D. buzzatii or in D. simulans, but in all cases except wing width in D. buzzatii this could not be interpreted as adaptive responses to thermal conditions in the localities. The range of plastic changes across temperatures for particular traits differed between species, indicating a possibility for different levels of environmental stress experienced by the natural populations. The reaction norm curves and the response of within‐population variability to thermal treatments suggested better adaptations to higher and lower temperatures for D. buzzatii and D. simulans, respectively. The levels of among‐population differentiation depended on developmental temperature, implying environmental effects on the expression of the genetic variance. At 20 and 25 °C, interpopulation variability in D. buzzatii was higher than in D. simulans, while at 30 °C the opposite trend was observed. © 2005 The Linnean Society of London, Biological Journal of the Linnean Society, 2005, 84 , 119–136.     

Growth temperature and phenotypic plasticity in two Drosophila sibling species: probable adaptive changes in flight capacities

In the sibling species Drosophila melanogaster and D. simulans, growth and development at constant temperatures, from 12 to 30 °C, resulted in extensive variations of adult size and flight parameters with significant differences between species. Changes in body weight, thorax length and wing length were nonlinear, with maximum values of each trait at lower temperatures for D. simulans than for its sibling species. By contrast, the wing/thorax ratio and the wing loading varied monotonically with growth temperature. These traits were negatively correlated, the wing/thorax ratio decreasing with growth temperature while the wing loading increased. Wing/thorax ratio, which is easier to measure, thus appears as a convenient predictor of wing loading. During tethered flight at the same ambient temperature, the wingbeat frequency changed linearly as a function of the wing moment of inertia. More interestingly, the beat rate was strongly correlated with the increase of wing loading at growth temperature above 13 °C. The likely adaptive significance of these morphometrical changes for flight efficiency is discussed.     

Evolutionary changes of nonlinear reaction norms according to thermal adaptation: a comparison of two Drosophila species

While the adaptive significance of discontinuous reaction norms is generally accepted, the evolutionary interpretation of continuous response curves remains speculative, and the occurrence of internal constraints is often suggested as an explanation of experimental observations. In Drosophila melanogaster, various morphometrical traits exhibit convex reaction norms to growth temperature, with a maximum value within the developmental thermal range. We compared a cold-adapted species (D. subobscura) with a mid thermal range at 16 °C, to the warm-adapted D. melanogaster (mid thermal range at 22 °C) for three different morphometrical traits: wing and thorax length in both sexes and ovariole number in females. Maximum value temperatures were ordered in the same way for the three traits in both species: ovariole number > thorax length > wing length. Significant differences were also observed between the two species for the curvature parameter of the quadratic adjustment. The major observation was a significant lateral shift in the reaction norms: maximum values were observed at much lower temperatures in the cold-adapted species than in the warm-adapted one. The parallelism between mid thermal range variation and the position of the maximum value strongly suggests an adaptive displacement of the response curves. Natural selection may thus act not only on trait mean values but also on phenotypic plasticity and on the shape of reaction norms.     

REML estimates of genetic parameters of sexual dimorphism for wing and thorax length in<Emphasis Type="Italic">Drosophila melanogaster</Emphasis>

Restricted maximum likelihood was used to estimate genetic parameters of male and female wing and thorax length in isofemale lines ofDrosophila melanogaster, and results compared to estimates obtained earlier with the classical analysis of variance approach. As parents within an isofemale line were unknown, a total of 500 parental pedigrees were simulated and mean estimates computed. Full and half sibs were distinguished, in contrast to usual isofemale studies in which animals were all treated as half sibs and hence heritability was overestimated. Heritability was thus estimated at 0.33, 0.38, 0.30 and 0.33 for male and female wing length and male and female thorax length, respectively, whereas corresponding estimates obtained using analysis of variance were 0.46, 0.54, 0.35 and 0.38. Genetic correlations between male and female traits were 0.85 and 0.62 for wing and thorax length, respectively. Sexual dimorphism and the ratio of female to male traits were moderately heritable (0.30 and 0.23 for wing length, 0.38 and 0.23 for thorax length). Both were moderately and positively correlated with female traits, and weakly and negatively correlated with male traits. Such heritabilities confirmed that sexual dimorphism might be a fast evolving trait inDrosophila. An erratum to this article is available at .     

The genetics of phenotypic plasticity. III. Genetic correlations and fluctuating asymmetries

We examined the relationship of three aspects of development, phenotypic plasticity, genetic correlations among traits, and developmental noise, for thorax length, wing length, and number of sternopleural bristles in Drosophila melanogaster. We used 14 lines which had previously been selected on either thorax length or plasticity of thorax length in response to temperature. A half-sib mating design was used and offspring were raised at 19° C or 25° C. We found that genetic correlations were stable across temperatures despite the large levels of plasticity of these traits. Plasticities were correlated among developmentally related traits, thorax and wing length, but not among unrelated traits, lengths and bristle counts. Amount of developmental noise, measured as fluctuating asymmetry and within-environmental variation, was positively correlated with amount of plasticity only for some traits, thorax length and bristle number, and only at one temperature, 25° C.     

An interspecific QTL study of Drosophila wing size and shape variation to investigate the genetic basis of morphological differences

The Drosophila wing has been used as a model in studies of morphogenesis and evolution; the use of such models can contribute to our understanding of mechanisms that promote morphological divergence among populations and species. We mapped quantitative trait loci (QTL) affecting wing size and shape traits using highly inbred introgression lines between D. simulans and D. sechellia, two sibling species of the melanogaster subgroup. Eighteen QTL peaks that are associated with 12 wing traits were identified, including two principal components. The wings of D. simulans and D. sechellia significantly diverged in size; two of the QTL peaks could account for part of this interspecific divergence. Both of these putative QTLs were mapped at the same cytological regions as other QTLs for intraspecific wing size variation identified in D. melanogaster studies. In these regions, one or more loci could account for intra- and interspecific variation in the size of Drosophila wings. Three other QTL peaks were related to a pattern of interspecific variation in wing size and shape traits that is summarized by one principal component. In addition, we observed that female wings are significantly larger and longer than male wings and the second, fourth and fifth longitudinal veins are closer together at the distal wing area. This pattern was summarized by another principal component, for which one QTL was mapped.     

Divergence of reaction norms of size characters between tropical and temperate populations of Drosophila melanogaster and D. simulans

Reaction norms to growth temperature of two size-related traits, wing and thorax length, were compared in tropical (West Indies) and temperate (France) populations of the two sibling species, Drosophila melanogaster and D. simulans. A major body size difference was found in D. melanogaster, with much smaller Caribbean flies, while D. simulans exhibited little size variation between geographical populations. The concave norms of reaction were adjusted to second- or third-degree polynomials, and characteristic points calculated i.e. maximum value (MV) and temperature of maximum value (TMV). TMVs were confirmed to be higher for thorax than for wing length, higher in D. melanogaster than in D. simulans, and higher in females than in males. For both traits Caribbean populations exhibited higher TMVs in the two species, strongly suggesting an adaptive shift of the reaction norms toward higher temperature in warm-adapted populations. The wing/thorax ratio was also analysed, and found to be significantly lower in tropical populations of both species. This ratio, which is related to wing loading and flight capacity, might evolve independently of body weight itself.     

Allelic variation,fragment length analyses and population genetic models: a case study on Drosophila microsatellites*

The allelic variation of 16 microsatellite loci from selected species of the Drosophila melanogaster and D. obscura group was determined. Intra‐ and interspecific sequence comparisons allowed discrimination of mutations affecting the repetitive microsatellite from those affecting the flanking regions. The hypotheses that slippage needs a minimum number of repeats in order to become efficient with respect to microsatellite variability, and of an increased mutation rate with increased length of the microsatellite are supported by the results of our analyses. There is in particular at the interrupted complex microsatellite locus BICOID in the species of the D. obscura group, extensive variation in the flanking regions in addition to length and sequence variation of the repetitive microsatellite. The allelic variation at this locus can hardly be explained by slippage alone. Estimates of microsatellite variability by fragment length analyses will pick up only a minor fraction of allelic variation at such loci, and conclusions that are based on the stepwise mutation model will not hold.     

Comparative Analysis of Morphological Traits Among Drosophila Melanogaster and D. Simulans: Genetic Variability, Clines and Phenotypic Plasticity

The two sibling cosmopolitan species, Drosophila melanogaster and D. simulans, are able to proliferate under very different climatic conditions. This has resulted in local adaptations, which are often arranged in latitudinal clines. Such clines are documented for body weight, wing and thorax length, sternopleural and abdominal bristle number, ovariole number and thoracic pigmentation. The overall magnitude of geographical differentiation is, however, much less in D. simulans than in D. melanogaster, and latitudinal clines are less pronounced. The fact that natural populations live under different climates raises the problem of interaction between temperature and phenotype. The reaction norms of morphometrical traits have been investigated as a function of growth temperature. The shapes of the response curves vary according to the investigated trait. They are generally curvilinear and can be described by calculating characteristic values after polynomial adjustments. For a given trait, the reaction norms of the two species are similar in their shape, although some significant differences may be observed. Within each species, significant differences are also observed between geographic populations: reaction norms are not parallel and the divergence is better marked when more distant populations (e.g., temperate and tropical) are compared. It thus appears that besides mean trait value, phenotypic plasticity is also a target of natural selection. A specific analysis of wing shape variation according to growth temperature was also undertaken. Reaction norms with different shapes may be observed in various parts of the wing: the major effect is found between the basis and the tip of the wing, but in a similar way in the two species. By contrast, some ratios, called wing indices by taxonomists, may exhibit completely different reaction norms in the two species. For a single developmental temperature (25 degrees C) the phenotypic variability of morphometrical traits is generally similar in the two species, and also the genetic variability, estimated by the intraclass correlation. A difference exists, however, for the ovariole number which is less variable in D. simulans. Variance parameters may vary according to growth temperature, and a detailed analysis was made on wing dimensions. An increase of environmental variability at extreme, heat or cold temperatures, has been found in both species. Opposite trends were, however, observed for the genetic variability: a maximum heritability in D. simulans at middle temperatures, corresponding to a minimum heritability in D. melanogaster. Whether such a difference exists for other traits and in other populations deserves further investigations. In conclusion, morphometrical analyses reveal a large amount of significant differences which may be related to speciation and to the divergence of ecological niches. Within each species, numerous geographic variations are also observed which, in most cases, reflect some kinds of climatic adaptation.     

Half-sib analysis of three morphological traits in Drosophila melanogaster under poor nutrition

Variation in thorax length, wing length and sternopleural bristle number was examined in Drosophila melanogaster reared in stressful and nonstressful environments using paternal half-sib design. Low concentration of yeast in the medium was used as a stress factor. Phenotypic variation of thorax length and wing length was higher under poor nutrition than in the control; in bristle number, phenotypic variation was relatively stable regardless of the environment. Heritability of all the traits analyzed was generally lower under nutritional stress. Heritability changes in thorax length and wing length were mainly due to an increase in the environmental variance under stress, whereas in bristle number, stress resulted in a decrease in genetic variation. Genetic variance in thorax length was higher under poor nutrition; in wing length, no difference in genetic variance between environments was found.     

A clinally varying promoter polymorphism associated with adaptive variation in wing size in Drosophila

Body size often shows adaptive clines in many ectotherms across altitude and latitude, but little is known about the genetic basis of these adaptive clines. Here we identify a polymorphism in the Dca (Drosophila cold acclimation) gene in Drosophila melanogaster that influences wing size, affects wing:thorax allometry and also controls a substantial proportion of the clinal wing‐size variation. A polymorphism in the promoter region of Dca had two common alleles showing strong reciprocal clinal variation in frequency with latitude along the east coast of Australia. The Dca‐237 allele increased towards the tropics where wing size is smaller. A within‐population association study highlighted that an increase in the frequency of this allele decreased wing size but did not influence thorax size. A manipulated increase in the level of expression of Dca achieved through UAS‐GAL4 was associated with a decrease in wing size but had no effect on thorax size. This was consistent with higher Dca expression levels in family lines with higher frequency of the Dca‐237 allele. Genetic variation in the promoter region of the Dca gene appears to influence adaptive size variation in the eastern Australian cline of Drosophila melanogaster and accounts for more than 10% of the genetic variation in size within and between populations.     

Microspatial structure of Drosophila melanogaster populations in Brazzaville: evidence of natural selection acting on morphometrical traits

Two genetically distinct habitat races of Drosophila melanogaster coexist in Brazzaville (Congo). One is the typical field type of Afrotropical populations, the other mainly breeds in beer residues in breweries. These two populations differ in their ethanol tolerance, in their allelic frequencies at several enzyme and microsatellite loci and in the composition of their cuticular hydrocarbons. The brewery population is quite similar to European temperate populations with regard to all these traits. Previous investigations of two morphological traits (ovariole number and sternopleural bristle number) failed to detect any difference between the two habitat races. Here we investigated other morphological traits (wing and thorax length, thorax pigmentation and female abdomen pigmentation). The reaction norms of these traits according to growth temperature were compared in the two Afrotropical habitat races and in a French temperate population. As expected, the French population was very different from the field African population: as a general rule, the brewery population (Kronenbourg) was intermediate in several aspects between the other two. We conclude that the strong selective forces that maintain the genetic divergence between the two habitat races also act on morphometrical traits, and the possible selective mechanisms are discussed.     

Developmental Time and Thorax Length Differences Between the Cactophilic Species Drosophila Buzzatii and D. Koepferae Reared in Different Natural Hosts

Drosophila buzzatii and Drosophila koepferae are two cactophilic sibling species whose ranges partially overlap in Northwestern and Western Argentina. Both species can utilize the decaying tissues of both Opuntia and columnar cacti as breeding sites. Though D. buzzatii and D. koepferae are not differentially attracted to Opuntia and columnar hosts, the composition of the communities of flies emerging from natural substrates of both cacti differed significantly in a natural population. The objective of this paper is to analyze whether intra and/or interspecific competition affects development time and thorax length in D. buzzatii and D. koepferae when both species are reared in single and mixed species culture and fed with semi-natural media prepared with fermenting materials of Opuntia sulphurea(tuna) and Trichocereus terschekii(cardón). Our results showed that both traits differ significantly between flies raised in different hosts and that differences between D. koepferae and D. buzzatii species for both thorax length and development time depend on the type of culture (mixed vs. single species). In addition, the host by type of culture interaction was significant. We also observed thorax length differences between Drosophila species and type of culture. Our present data suggest that the effect of intra and interspecific competition varied between the two traits investigated and between species. However, competition alone cannot explain the differential pattern of resource utilization shown by D. buzzatii and D. koepferae in the natural population studied.     

Fluctuating asymmetry in hybrids of sibling species, Drosophila ananassae and Drosophila pallidosa, is trait and sex specific

Due to inconsistent results of the empirical studies, the relationship between fluctuating asymmetry (FA, a measure of developmental stability) and interspecific hybridization has been the subject of intense debates. In the present study, we have assessed the impact of interspecific hybridization between 2 sibling species of Drosophila: Drosophila ananassae and Drosophila pallidosa on the levels of FA over 3 generations. Trait size of different morphological traits, namely, sternopleural bristle number, wing length (WL), wing to thorax (W/T) ratio, sex comb tooth number (SCTN), and ovariole number differed significantly among parental species and their hybrids of different generations in both the sexes. However, the levels of FA of different morphological traits were similar in parental species and their hybrids of different generations in males (except SCTN) and in females (except for WL and W/T ratio). These results are interpreted in terms of developmental stability as a function of a balance between the level of heterozygosity and the disruption of coadapted gene complexes.     

Genetic variability of sexual size dimorphism in a natural population of<Emphasis Type="Italic">Drosophila melanogaster</Emphasis>: An isofemale-line approach

Most animal species exhibit sexual size dimorphism (SSD). SSD is a trait difficult to quantify for genetical purposes since it must be simultaneously measured on two kinds of individuals, and it is generally expressed either as a difference or as a ratio between sexes. Here we ask two related questions: What is the best way to describe SSD, and is it possible to conveniently demonstrate its genetic variability in a natural population? We show that a simple experimental design, the isofemale-line technique (full-sib families), may provide an estimate of genetic variability, using the coefficient of intraclass correlation. We consider two SSD indices, the female-male difference and the female/male ratio. For two size-related traits, wing and thorax length, we found that both SSD indices were normally distributed. Within each family, the variability of SSD was estimated by considering individual values in one sex (the female) with respect to the mean value in the other sex (the male). In a homogeneous sample of 30 lines ofDrosophila melanogaster, both indices provided similar intraclass correlations, on average 0.21, significantly greater than zero but lower than those for the traits themselves: 0.50 and 0.36 for wing and thorax length respectively. Wing and thorax length were strongly positively correlated within each sex. SSD indices of wing and thorax length were also positively correlated, but to a lesser degree than for the traits themselves. For comparative evolutionary studies, the ratio between sexes seems a better index of SSD since it avoids scaling effects among populations or species, permits comparisons between different traits, and has an unambiguous biological significance. In the case ofD. melanogaster grown at 25?C, the average female/male ratios are very similar for the wing (1.16) and the thorax (1.15), and indicate that, on average, these size traits are 15–16% longer in females.