Thermal behavior of bone and synthetic hydroxyapatites submitted to magnesium interaction in aqueous medium

The thermal behavior of the products obtained from magnesium interaction with powdered femoral bone and carbonate containing synthetic hydroxyapatite under conditions of pH fluctuation in aqueous medium has been investigated. The products, heat treated at different temperatures from 100 to 1300 degrees C, have been characterized by infrared spectroscopy and X-ray diffraction technique. The results show that the interaction with magnesium ion destabilizes the apatitic structure and favours its thermal conversion into beta-tricalcium phosphate (beta-TCP). The replacement of magnesium with calcium in the beta-TCP crystal lattice hinders its subsequent thermal conversion into the alpha form. The influence of magnesium on the thermal stability is much more evident for carbonate-containing synthetic hydroxyapatite than for bone apatite.     

Fluoride and carbonate incorporation into hydroxyapatite under condition of cyclic pH variation

Fluoride and carbonate ions, which are present in the inorganic phase of bone, enamel, and dentine, are known to play an important and opposite role in the process of recrystallization. We have investigated the incorporation of fluoride and carbonate ions into hydroxyapatite structure under conditions of cyclic pH fluctuation and the effect of these incorporations on the conversion of hydroxyapatite into β-tricalcium phosphate after heat treatment. Fluoro-hydroxyapatite has been obtained as unique crystalline phase up to 20 fluoride at. %. The degree of substitution of fluoride for hydroxyl does not depend on the extent of carbonate incorporated into the apatite structure. On the other hand, the carbonate incorporation into the apatite structure seems to be hindered by the contemporary presence of fluoride. Both fluoride and carbonate exhibit a stabilizing effect on the apatite structure, as far as its conversion into β-tricalcium phosphate is concerned. The order of efficiency in stabilizing the apatite structure is F⁻ > F⁻ + CO₃²⁻ > C0₃²⁻.     

Micromechanical evaluation of mineralized multilayers

The biomechanical stability of osseointegrated implants is of particular importance, especially the stability which is achieved from structural manipulation at the interface between the implant surface and the bone tissues. Nanoscale β-tricalcium phosphate-immobilized titanium was prepared by discharge into a physiological buffered saline solution. Compared with hydroxyapatite, it has been shown to be effective in generating a bone-like chemical structure on the surface by cooperative interaction between osteoblastic cells and the β-tricalcium phosphate. The present study, after cell cultivation, investigates the nanostructures and biomechanical property differences of a mineralized layer formed on two samples of nano-calcium phosphate-immobilized titanium. A scanning probe microscope study revealed that the mineralized tissue formed on the β-tricalcium phosphate samples after 1 week of cell culture showed significantly higher roughness, compared with hydroxyapatite samples. Nanoindentation micromechanical evaluation of the in vitro generated multilayered structures exhibited thicker bone-like mineralized layers on the β-tricalcium phosphate samples. A successful modification of titanium implants through the cooperative interaction between osteoblastic cells and nano β-tricalcium phosphate is anticipated.     

Degradation properties of co-continuous calcium-phosphate-polyester composites

Co-continuous composites consisting of a porous calcium phosphate matrix (hydroxyapatite, HA, or β-tricalcium phosphate, TCP) filled with poly(D,L-lactide) (PDLLA) were produced with two different methods: in situ polymerization of D,L-lactide monomer inside the matrix, or infiltration of the matrix with molten polymer. The influence of the calcium phosphate matrix as well as the manufacturing method on the degradation were investigated with accelerated in vitro studies at 42 °C in pH 7.4 phosphate-buffered saline (PBS), with some controls at 37 °C. The results show that samples produced with the infiltration method had higher initial molecular weights leading to a later onset of mass loss. Heterogenous polymer degradation was still present in the composites, as indicated by molecular weight distributions and glass transition temperature measurements. The calcium phosphate matrix delayed degradation, with evidence from X-ray microtomography suggesting that the polymer degrades more slowly in proximity to the matrix.     

Strontium-substituted hydroxyapatite nanocrystals

Among the many cations that can substitute for calcium in the structure of hydroxyapatite, strontium provokes an increasing interest because of its beneficial effect on bone formation, and prevention of bone resorption. We have synthesized calcium-strontium hydroxyapatite solid solutions in the whole range of composition by direct synthesis in an aqueous medium. The structural, morphological and chemical characterizations were carried out on the as-obtained products. Strontium is quantitatively incorporated into hydroxyapatite where its substitution for calcium provokes a linear increase in the lattice constants and a linear shift of the infrared absorption bands of the hydroxyl and phosphate groups, coherent with the greater ionic radius of strontium. At variance, the effect of relatively low levels of strontium concentration on the dimensions of the coherent length of the perfect crystalline domains and on the morphology of the nanocrystals is opposite to that observed at high levels of strontium concentration. Similarly, the results of the structure refinements carried out using the Rietveld method indicate that whilst in most of the range of concentration strontium displays a slight preference for the M(2) cation site coherently with its ionic radius, at very low concentrations its occupancy of the smaller M(1) site is slightly higher.     

Synthesis and in vitro behavior of β-TCP zirconia/polymeric biocomposites for bio-applications

Novel biocomposites were fabricated by impregnating β-tricalcium phosphate (β-TCP)/zirconia particles into the polymers matrix. The composite materials were characterized using thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), Fourier Transform Infrared (FT-IR) analyzes and Scanning Electron Microscopy (SEM). The results confirmed the conversion of hydroxyapatite (HA) to β-TCP at a sintering temperature of 1150 °C with or without zirconia powder. The in vitro behavior was assessed via measurement of calcium and phosphorus ions in SBF (simulated body fluid). FT-IR and SEM of the composites were performed pre and post immersion in SBF. The results prove that the bone like apatite layer formation was enhanced on the β-TCP-Z20/polymeric composite surface more than that on the β-TCP-Z10/polymeric composite. Therefore, the data confirmed that zirconia plays an important role in the enhancement of the apatite formation. The conclusions proved that the β-TCP-Z20/polymeric biocomposites, containing 20% of zirconia, are promising for bone remodeling applications.     

磷酸三钙涂层镁合金材料的细胞相容性研究

目的:制备磷酸三钙(β-TCP)涂层镁合金材料,评价材料表面的特性及体外的细胞生物适应性。方法 电化学法制备β-TCP涂层镁合金材料(β-TCP-Mg-AI-Zn),观测金属材料表面微观结构特性和能谱分析,小鼠颅骨源成骨细胞与材料直接接触培养,荧光染色观察材料表面细胞生长状况,检测成骨细胞增殖和碱性磷酸酶(ALP)活性。结果 β-TCP涂层Mg-AI-Zn材料表面呈多孔状,材料表面含有镁、钙和磷等元素;成骨细胞与材料直接接触培养24 h及48 h后,材料表面有大量的成骨细胞粘附、伸展、汇合;与Mg-AI-Zn材料比较,β-TCP-Mg-AI-Zn材料明显地促进细胞增殖、显著地增加成骨细胞中ALP活性 (P＜0.05)。结论 β-TCP涂层改善了Mg-AI-Zn镁合金材料表面特性及体外的细胞相容性,有望成为新一代可降解医用金属材料。     

The influence of amino acids on the biomineralization of hydroxyapatite in gelatin

The effects of pH on the calcium phosphate phase, of Tris and of amino acids, such as aspartic acid, glutamic acid, and serine on hydroxyapatite formation and morphology, were studied in double diffusion experiments. In this system, hydroxyapatite was only formed when the pH was around 7.4 or higher for the duration of the reaction. A decrease in pH resulted in the transformation of hydroxyapatite to octacalcium phosphate. Amino acids and Tris or the buffering capacity of Tris have an effect on the morphology of the synthetic hydroxyapatite. The presence of the additive results in spheres consisting of needles, blades or plates depending on the reaction system.     

多孔beta-磷酸三钙与磷灰石复合材料的制备及其细胞相容性研究

综合运用三维凝胶叠层法和发泡法制备了多孔β-磷酸三钙支架。将多孔支架在1．5倍模拟体液中浸泡14天,得到材料1;或者将其在氢氧化钠溶液中浸泡4天,再在1．5倍模拟体液中浸泡14天,得到材料2。测定了两种材料的物理性能,讨论了类骨磷灰石层对材料矿物组成及其显微结构等的影响。将两组材料分别与成骨前体细胞在体外复合培养,观察和测定了细胞的形态和增殖情况。结果表明复合材料的主要成分为β-磷酸三钙,表面具有结构不完整的含有碳酸磷灰石的类骨磷灰石,成骨细胞能在两组材料上正常粘附和增殖,而且材料2上的细胞粘附情况更好,说明多孔β-磷酸三钙与磷灰石的复合材料有望成为一种有应用前景的骨修复材料和骨组织工程支架材料。     

Formation of pyrophosphate on hydroxyapatite with thioesters as condensing agents

"Energy-rich" thioesters are shown to act as condensing agents in the formation of pyrophosphate on hydroxyapatite in the presence of water at ambient temperature. The yield of pyrophosphate based on thioester ranges from 2.5% to 11.4% and depends upon the pH and concentration of reactants. Reaction of 0.130 M hydroxyapatite suspended in a solution of 0.08 M sodium phosphate and 0.20 M imidazole hydrochloride (pH 7.0) with 0.10 M N,S-diacetylcysteamine for 6 days gives the highest yield of pyrophosphate (11.4%). Pyrophosphate formation requires the presence of hydroxyapatite, sodium phosphate and the thioester, N,S-diacetylcysteamine. The related thioester, N,S-diacetylcysteine, also yields pyrophosphate in reactions on hydroxyapatite.     

Hydroxyapatite based biocomposite scaffold: A highly biocompatible material for bone regeneration

The conventional approaches for treating bone defects such as autografts donor tissue shortages and allografts transmission of diseases pose many shortcomings. The objective of this study was to design a nano strontium/magnesium doped hydroxyapatite (Sr/Mg-HA) with chitosan (CTS) and multi-walled carbon nanotubes (MWCNT) (Sr/Mg-HA/MWCNT/CTS) biocomposite was created to support the growth of osteoblasts using a solvent evaporation method. To help the growth of osteoblasts, a solvent evaporation technique was used to design a nano strontium/magnesium doped hydroxyapatite with chitosan and multi-walled carbon nanotubes biocomposite. We studied the biocompatibility and efficiency in vitro of biocomposite following physicochemical analyzes. Tests of biocompatibility, cell proliferation, mineralization, and osteogenic differentiation have shown that in-vitro safety and effectiveness of biocomposite are good. The performance of biocomposite was more efficient in in-vitro as well as in vivo experiments than in Sr/Mg-HA nanoparticles. Briefly, the Sr/Mg-HA/MWCNT/CTS biocomposite is an ideal candidate for effective bone repair in clinics with excellent mechanical properties with durable multi-biofunctional antibacterial properties and osteoinductivity.     

The pathway of pepsin-catalysed transpeptidation. Evidence for the reactive species being the anion of the acceptor molecule

Several minor pepsinogens, present in extracts of bovine fundic mucosa obtained from the fourth stomach or abomasum, were separated from the main pepsinogen by chromatography on hydroxyapatite at pH7.3. The major pepsinogen and two of these minor pepsinogens were studied in detail. All three zymogens have N-terminal Ser-Val-, C-terminal -Val-Ala and not more than 1mol of glucose/mol of protein; no significant differences in amino acid composition were found. The pepsinogens differ in their organic phosphate content, which accounts for their chromatographic separation. By activation at 0 degrees C and pH2, a corresponding series of pepsins is formed. These enzymes were separated by hydroxyapatite chromatography at pH5.7. All the pepsins have N-terminal valine, C-terminal alanine and are free from carbohydrate. Again the only difference detected among them is in their organic phosphate content. The pepsins of high phosphate content are converted by an acid phosphatase in vitro into pepsins of low phosphate content.     

Effect of βTCP filled polyetheretherketone on osteoblast cell proliferation in vitro

Summary Non-resorbable thermoplastic polymers have become more important for reconstructive surgery due to their excellent chemical and physical properties. Polyetheretherketone-β-tricalcium phosphate (βTCP-PEEK) composites were developed as alternative materials for load-bearing applications. This study presents the effect of polyetheretherketone (PEEK) specimens incorporated with 5, 10, 20 and 40 wt% β-tricalcium phosphate (βTCP) and processed by injection molding on cultivated osteoblast cells. Normal human osteoblast (NHOst) cells were seeded onto polymer discs to evaluate cell viability and proliferation after 24, 72 and 120 h of cultivation by employing the WST-1 assay. Standard tissue culture plastic was used as a control. The osteoblast cells were found to be viable in all PEEK groups, while the cell proliferation was progressively inhibited due to the incorporated β-tricalcium phosphate. βTCP-PEEK showed concentration independent decrease of cell proliferation compared to the unfilled PEEK and the control group. In summary, this study confirms the non-toxic nature of pure PEEK, whereas this could not definitely be verified for βTCP-PEEK as a composite material in chosen concentrations of β-tricalcium phosphate in vitro.     

Preparation and characterization of milk calcium salts by using casein phosphopeptide

Milk calcium salt solution was prepared by the following procedures using casein phosphopeptides (CPP). To CPP solution, 1 M citric acid, 1 M CaCl2 and 1 M K2HPO4 were added with stirring, while adjusting the pH to 6.7. The prepared solution was left for 12 hr at 25 degrees C and then used for subsequent experiments, or lyophilized. The concentrations of organic phosphate of CPP, calcium, inorganic phosphate, and citrate in the typical milk salt solution were 7, 30, 22, and 10 mM, respectively, which were close to those in bovine milk. The lyophilized sample was easily dissolved in water. No crystal structure of hydroxyapatite was shown in the lyophilized milk calcium salts by X-ray diffraction analysis, although the pattern of KCl crystal was observed. The X-ray diffraction pattern of commercial whey mineral, which was prepared by precipitation at alkaline pH from rennet whey, was similar to that of hydroxyapatite. It was confirmed by high-performance gel chromatographic analysis that the form of calcium phosphate in the milk calcium salts was similar to that of casein micelles.     

Conformational analysis of a snake neurotoxin by prediction from sequence, circular dichroism, and raman spectroscopy.

The secondary structure of the major neurotoxin from the sea snake Lapemis hardwickii was investigated by several methods of conformational analysis: structure prediction, circular dichroism, and laser Raman spectroscopy. From the primary structure, secondary structure prediction yielded two regions of β-sheet structure at residues 1–7 and 41–45. β-Turns were predicted at residues 14–17, 20–23, 30–33, 37–40, and 46–49. From the predictions, the toxin appears to be composed of approximately 20% β-sheet and 33% β-turn. The CD spectrum of the native toxin appears to be a hybrid of model spectra for β-sheet and β-turn proteins. The pH perturbation studies on the toxin observed by CD demonstrated that the toxin is a very stable molecule except at extremely high or low pH values. The Raman data indicated that the toxin contains both antiparallel β-sheet and β-turn structure. Using two methods of secondary structure quantitation from Raman spectra the molecule was calculated to contain 35% β-sheet from one method and 27% from the other. Overall, the various methods demonstrate that the toxin is composed of β-sheet and β-turn structure with little or no α-helix present. From the comparison of these different techniques appreciation can be gained for the necessity of several methods when identifying and quantitating secondary structure.     

Effect of pH on chloroplast photosynthesis. Inhibition of O2 evolution by inorganic phosphate and magnesium.

1. The pH optimum of CO2-dependent O2 evolution by barley (Hordeum vulgare L.) chloroplasts was found to be between 7.8 and 8.2. The addition of 1 mM MgCl2 in the dark inhibited O2 evolution over the entire pH range tested and resulted in a much sharper pH profile centered around pH 8.2. 2. The pH optimum for O2 evolution, in the presence and absence of 1 mM MgCl2, was acid-shifted 0.3--0.4 pH units by 2 mM NH4Cl. The pH optimum of O2 evolution, with and without 1 mM MgCl2, was base-shifted by 2 mM sodium acetate, approx. 0.5 pH units relative to the controls. 3. O2 evolution in the presence of bicarbonate plus 3-phosphoglycerate or ribose-5-phosphate was considerably less sensitive to pH than CO2-dependent O2 evolution in the absence of substrate. With these substrates, both in the presence and absence of 1 mM MgCl2, the pH optimum was broad and was centered around pH 7.8. 4. Inhibition of CO2-dependent O2 evolution by inorganic phosphate and magnesium increased as the pH of the reaction mixture was decreased below the optimum. Decreasing the pH from 8.2 to 7.6, reduced over 3-fold the concentration of inorganic phosphate required to inhibit O2 evolution completely. For magnesium, a similar change in pH reduced the concentration required to inhibit O2 evolution 50% approx. 5-fold. At pH 8.2, magnesium inhibition required inorganic phosphate. Magnesium was not required for inhibition of O2 evolution by inorganic phosphate, but incresaed the relative inhibition observed. 5. Illumination of intact barley chloroplasts increased the activity of NADP-glyceraldehyde-3-P dehydrogenase, phosphoribulokinase and fructose-1,6-diphosphatase. MgCl2 and inorganic phosphate prevented this increase in enzyme activity at concentrations that completely inhibited CO2-dependent O2 evolution. 6. The results obtained suggest that magnesium inhibition of O2 evolution may be caused by enhanced phosphate exchange across the chloroplast envelope.     

Conformational structure of bombesin as studied by vibrational and circular dichroism spectroscopy

Raman and Fourier transform infrared (FTIR) spectroscopies and circular dichroism (CD) have been applied to investigate the secondary structure of bombesin in the solid state and in phosphate buffer solution (pH 3.8). At concentrations around 10⁻⁵ M, circular dichroism reveals that bombesin exists as an irregular or disordered conformation. However, the secondary structure of the peptide appears to be a mixture of disordered structure and intermolecular β-sheets in 0.01 M sodium phosphate buffer when the peptide concentrations are higher than around 6.5 mM. The tendency of bombesin to form aggregated β-sheet species seems to be originated mainly in the sequence of the residues 7–14, as supported by the Raman spectra and β-sheet propensities (P_β) of the amino-acid residues. It is the hydrophobic force of this amino-acid sequence, and not a salt bridge effect, that is the factor responsible for the formation of peptide aggregates.     

Phosphoglycolate phosphatase. Effect of cation and pH on activity.

P-glycolate phosphatase requires divalent cations for activity. Activity-pH curves identified 2 active site residues with pK values at pH 5.7 and pH 9.1 in the presence of magnesium and at pH 5.7 and pH 7.5 in the presence of manganese or cobalt. Saturation velocity kinetics enabled the identification of two distinct divalent cation binding sites. The first, nonspecific site has a K0.5 of 2 to 7 x 10(-5) M, depending on the cation and the pH. The second site, which is specific for magnesium, binds this cation in a negatively cooperative fashion. The affinity at pH 8.1 varies approximately 100-fold from the first magnesium bound to the fourth. The negative cooperativity is greatest at high pH. Because the pH range of activity is very broad, both the phosphate monoanion and dianion of P-glycolate must be bound as the substrate. The concentration of these two species at the apparent Km is independent of magnesium concentration. The P-glycolate.magnesium complex is kinetically inactive.     

Inhibition of hydroxyapatite formation in collagen gels by chondroitin sulphate.

Crystal growth in native collagen gels has been used to determine the role of extracellular matrix macromolecules in biological calcification phenomena. In this system, type I collagen gels containing sodium phosphate and buffered at pH 7.4 are overlayed with a solution containing CaCl2. Crystals form in the collagen gel adjacent to the gel-solution interface. Conditions were determined which permit the growth of crystals of hydroxyapatite [Ca10(PO4)6(OH)2]. At a Ca/P molar ratio of 2:1, the minimum concentrations of calcium and phosphate necessary for precipitation of hydroxyapatite are 10 mM and 5 mM, respectively. Under these conditions, precipitation is initiated at 18-24h, and is maximal between 24h and 6 days. Addition of high concentrations of chondroitin 4-sulphate inhibits the formation of hydroxyapatite in collagen gels; initiation of precipitation is delayed, and the final (equilibrium) amount of precipitation is decreased. Inhibition of hydroxyapatite formation requires concentrations of chondroitin sulphate higher than those required to inhibit calcium pyrophosphate crystal formation.     

Formation of β-cyanoalanine and pyruvate by Acacia georginae

Pyruvate is formed on incubation of l-cysteine with acetone powder preparations of Acacia georginae but in the presence of cyanide, β-cyanoalanine is produced and pyruvate production is highly depressed. The pH optimum for pyruvate production is 8·5. In the presence of fluoride (1·5 mM), the pH profile is unchanged and in the presence of cyanide (1·5 mM), minimal pyruvate production occurs at pH 8·5. Although addition of pyridoxal phosphate had no influence on pyruvate or β-Cyanoalanine production, these processes were prevented by sodium borohydride, an inhibitor of pyridoxal enzymes. Neither l-serine nor O-acetyl-l-serine serve as alternative substrates for pyruvate production. β-Fluoroalanine was not detected on incubating fluoride with an enzyme preparation from A. georginae acetone powders.