Reactivation of isolated mitotic apparatus: metaphase versus anaphase spindles

Mitotic spindles isolated from sea urchin eggs can be reactivated to undergo mitotic processes in vitro. Spindles incubated in reactivation media containing sea urchin tubulin and nucleotides undergo pole-pole elongation similar to that observed in living cells during anaphase-B. The in vitro behavior of spindles isolated during metaphase and anaphase are compared. Both metaphase and anaphase spindles undergo pole-pole elongation with similar rates, but only in the presence of added tubulin. In contrast, metaphase but not anaphase spindles increase chromosome-pole distance in the presence of exogenous tubulin, suggesting that in vitro, tubulin can be incorporated at the kinetochores of metaphase but not anaphase chromosomes. The rate of spindle elongation, ultimate length achieved, and the increase in chromosome-pole distance for isolated metaphase spindles is related to the concentration of available tubulin. Pole-pole elongation and chromosome-pole elongation does not require added adenosine triphosphate (ATP). Guanosine triphosphate (GTP) will support all activities observed. Thus, the force generation mechanism for anaphase-B in isolated sea urchin spindles is independent of added ATP, but dependent on the availability of tubulin. These results support the hypothesis that the mechanism of force generation for anaphase-B is linked to the incorporation of tubulin into the mitotic apparatus. (If, in addition, a microtubule-dependent motor-protein(s) is acting to generate force, it does not appear to be dependent on ATP as the exclusive energy source.     

The role of tubulin polymerization during spindle elongation in vitro

We describe the effect of exogenous tubulin on reactivation of anaphase spindle elongation in isolated diatom spindles. In the absence of tubulin, spindle elongation is limited to the equivalent of the microtubule overlap zone, but in the presence of tubulin spindle elongation is several times the length of the overlap zone. Biotinylated neurotubulin is incorporated into the overlap zone and around the poles. Before spindles have elongated by the equivalent of the overlap zone, there are two regions of incorporated tubulin flanking this zone. After further elongation, there is one broad zone of incorporated tubulin in the spindle midzone. Spindle elongation and the pattern of tubulin incorporation into the midzone, but not the poles, are ATP-dependent and vanadate-sensitive. These results suggest that tubulin adds onto the ends of microtubules in the overlap zone, which then slide through the midzone as the spindle elongates.     

DSK1, a novel kinesin-related protein from the diatom Cylindrotheca fusiformis that is involved in anaphase spindle elongation

We have identified an 80-kD protein that is involved in mitotic spindle elongation in the diatom Cylindrotheca fusiformis. DSK1 (Diatom Spindle Kinesin 1) was isolated using a peptide antibody raised against a conserved region in the motor domain of the kinesin superfamily. By sequence homology, DSK1 belongs to the central motor family of kinesin- related proteins. Immunoblots using an antibody raised against a non- conserved region of DSK1 show that DSK1 is greatly enriched in mitotic spindle preparations. Anti-DSK1 stains in diatom central spindle with a bias toward the midzone, and staining is retained in the spindle midzone during spindle elongation in vitro. Furthermore, preincubation with anti-DSK1 blocks function in an in vitro spindle elongation assay. This inhibition of spindle elongation can be rescued by preincubating concurrently with the fusion protein against which anti-DSK1 was raised. We conclude that DSK1 is involved in spindle elongation and is likely to be responsible for pushing hal-spindles apart in the spindle midzone.     

The mechanism of anaphase spindle elongation: uncoupling of tubulin incorporation and microtubule sliding during in vitro spindle reactivation

To study tubulin polymerization and microtubule sliding during spindle elongation in vitro, we developed a method of uncoupling the two processes. When isolated diatom spindles were incubated with biotinylated tubulin (biot-tb) without ATP, biot-tb was incorporated into two regions flanking the zone of microtubule overlap, but the spindles did not elongate. After biot-tb was removed, spindle elongation was initiated by addition of ATP. The incorporated biot-tb was found in the midzone between the original half-spindles. The extent and rate of elongation were increased by preincubation in biot-tb. Serial section reconstruction of spindles elongating in tubulin and ATP showed that the average length of half-spindle microtubules increased due to growth of microtubules from the ends of native microtubules. The characteristic packing pattern between antiparallel microtubules was retained even in the "new" overlap region. Our results suggest that the forces required for spindle elongation are generated by enzymes in the overlap zone that mediate the sliding apart of antiparallel microtubules, and that tubulin polymerization does not contribute to force generation. Changes in the extent of microtubule overlap during spindle elongation were affected by tubulin and ATP concentration in the incubation medium. Spindles continued to elongate even after the overlap zone was composed entirely of newly polymerized microtubules, suggesting that the enzyme responsible for microtubule translocation either is bound to a matrix in the spindle midzone, or else can move on one microtubule toward the spindle midzone and push another microtubule of opposite polarity toward the pole.     

Reactivation of spindle elongation in vitro is correlated with the phosphorylation of a 205 kd spindle-associated protein

Mitotic spindles isolated from the diatom Stephanopyxis turris consist of two half-spindles of closely interdigitating microtubules that slide relative to one another in the presence of ATP, reinitiating spindle elongation (anaphase B) in vitro. Purified spindles that have been exposed to ATP-gamma-S undergo ATP-dependent reactivation more readily than do control spindles. Thiophosphorylated proteins in such spindles are located in the spindle midzone, kinetochores, and a portion of the pole complex. One major thiophosphorylated peptide of 205 kd is detected in extracts prepared from spindles labeled with [35S]ATP-gamma-S, and is also localized in the spindle midzone by using an antibody that recognizes thiophosphorylated proteins. It is likely that this 205 kd peptide is either a positive regulator or mechanochemical transducer of microtubule sliding when it is in a phosphorylated state.     

Physiological and ultrastructural analysis of elongating mitotic spindles reactivated in vitro

We have developed a simple procedure for isolating mitotic spindles from the diatom Stephanopyxis turris and have shown that they undergo anaphase spindle elongation in vitro upon addition of ATP. The isolated central spindle is a barrel-shaped structure with a prominent zone of microtubule overlap. After ATP addition greater than 75% of the spindle population undergoes distinct structural rearrangements: the spindles on average are longer and the two half-spindles are separated by a distinct gap traversed by only a small number of microtubules, the phase-dense material in the overlap zone is gone, and the peripheral microtubule arrays have depolymerized. At the ultrastructural level, we examined serial cross-sections of spindles after 1-, 5-, and 10-min incubations in reactivation medium. Microtubule depolymerization distal to the poles is confirmed by the increased number of incomplete, i.e., c-microtubule profiles specifically located in the region of overlap. After 10 min we see areas of reduced microtubule number which correspond to the gaps seen in the light microscope and an overall reduction in the number of half-spindle microtubules to about one-third the original number. The changes in spindle structure are highly specific for ATP, are dose-dependent, and do not occur with nonhydrolyzable nucleotide analogues. Spindle elongation and gap formation are blocked by 10 microM vanadate, equimolar mixtures of ATP and AMPPNP, and by sulfhydryl reagents. This process is not affected by nocodazole, erythro-9-[3-(2-hydroxynonyl)]adenine, cytochalasin D, and phalloidin. In the presence of taxol, the extent of spindle elongation is increased; however, distinct gaps still form between the two half-spindles. These results show that the response of isolated spindles to ATP is a complex process consisting of several discrete steps including initiation events, spindle elongation mechanochemistry, controlled central spindle microtubule plus-end depolymerization, and loss of peripheral microtubules. They also show that the microtubule overlap zone is an important site of ATP action and suggest that spindle elongation in vitro is best explained by a mechanism of microtubule-microtubule sliding. Spindle elongation in vitro cannot be accounted for by cytoplasmic forces pulling on the poles or by microtubule polymerization.     

The mechanism of anaphase spindle elongation

At anaphase chromosomes move to the spindle poles (anaphase A) and the spindle poles move apart (anaphase B). In vitro studies using isolated diatom spindles demonstrate that the primary mechanochemical event responsible for spindle elongation is the sliding apart of half-spindle microtubules. Further, these forces are generated within the zone of microtubule overlap in the spindle mid-zone.     

Poleward microtubule flux mitotic spindles assembled in vitro

In the preceding paper we described pathways of mitotic spindle assembly in cell-free extracts prepared from eggs of Xenopus laevis. Here we demonstrate the poleward flux of microtubules in spindles assembled in vitro, using a photoactivatable fluorescein covalently coupled to tubulin and multi-channel fluorescence videomicroscopy. After local photoactivation of fluorescence by UV microbeam, we observed poleward movement of fluorescein-marked microtubules at a rate of 3 microns/min, similar to rates of chromosome movement and spindle elongation during prometaphase and anaphase. This movement could be blocked by the addition of millimolar AMP-PNP but was not affected by concentrations of vanadate up to 150 microM, suggesting that poleward flux may be driven by a microtubule motor similar to kinesin. In contrast to previous results obtained in vivo (Mitchison, T. J. 1989. J. Cell Biol. 109:637-652), poleward flux in vitro appears to occur independently of kinetochores or kinetochore microtubules, and therefore may be a general property of relatively stable microtubules within the spindle. We find that microtubules moving towards poles are dynamic structures, and we have estimated the average half-life of fluxing microtubules in vitro to be between approximately 75 and 100 s. We discuss these results with regard to the function of poleward flux in spindle movements in anaphase and prometaphase.     

Cell division and the microtubular cytoskeleton]

Kinetochore microtubules result from an interaction between astral microtubules and the kinetochore of the chromosomes after breakdown of the nuclear envelope at the end of prophase. In this process, the end of a microtubule projecting from one of the polar regions contacts the primary constriction of a chromosome. The latter then undergoes rapid poleward movement. Concerning the mechanism of anaphase chromosome movement, the motive force for the chromosome-to-pole movement appears to be generated at the kinetochore or in the region very close to it. It has not been determined whether chromosomes propel themselves along stationary kinetochore microtubules by a motor at the kinetochore, or they are pulled poleward by a traction fiber consisting of kinetochore microtubules and associated motors. As chromosomes move poleward coordinate disassembly of kinetochore microtubules might occur from their kinetochore ends. In diatom and yeast spindles, elongation of the spindle in anaphase (anaphase B) may be explained by microtubule assembly at polar microtubule ends in the spindle mid-zone and sliding of the antiparallel microtubules from the opposite poles. The sliding force appears to be generated through an ATP-dependent microtubule motor. In isolated sea urchin spindles, the microtubule assembly at the equator alone might provide the force for spindle elongation, although, in addition, involvement of microtubule sliding by a GTP-requiring mechanochemical enzyme cannot be excluded. Discussions were made on possible participation in anaphase chromosome movement of such microtubule motors as dynein, kinesin, dynamin and the claret segregation protein.     

THE GLYCEROL-ISOLATED MITOTIC APPARATUS: A RESPONSE TO PORCINE BRAIN TUBULIN AND INDUCTION OF CHROMOSOME MOTION

The birefringence of the MAs or spindles isolated from sea urchin eggs with the 1 M glycerol-isolation medium was stabilized when more than 0.5 mg/ml tubulin was contained in the medium. The addition of glycerol up to a final concentration of of 4 M strongly stabilized the MAs even in the absence of GTP and tubulin. The birefringence of the spindle and asters was not reduced even for the periods of several hours. The incorporation of heterogeneous tubulin into the isolated anaphase MAs was demonstrated by augmentation of the birefringence at the interzonal region as well as half spindles accompanied by enlargement of spindle and asters. In the anaphase MAs isolated in the absence of brain tubulin, chromosomes moved a short distance toward the poles upon addition of ATP, Mg²⁺ and 0.5 mg/ml tubulin. When the MAs were isolated in the presence of 0.5 mg/ml tubulin, the chromosomes moved in a more regular fashion to half the way to the poles accompanied by an increase in spindle length by 10 to 15%. GTP could not be substituted for ATP for inducing the motion. The chromosome motion of the isolated anaphase spindle was less significant than that of the isolated MA. Increasing tubulin concentration to 3 mg/ml, the chromosomes in the isolated MA separated at random by an unusual growth of the spindle. The stretch of the interzonal region by incorporating heterogeneous tubulin seemed to push the chromosomes apart abnormally. It was suggested that brain tubulin in a range of 0.5 mg/ml supports a tubulin-MA microtubule equilibrium favoring more regular motion of chromosomes in vitro .     

A unique tubulin antiserum attenuates the rate of poleward chromosome movement in anaphase.

An antiserum against tubulin, NS20, was previously shown to specifically attenuate both fast axonal transport in vivo (Johnston, K. M. et al., Brain Res. 385, 38-45 (1986)) and in vitro (Johnston, K. M. et al., Cell Motil. Cytoskel. 7, 110-115 (1987)) and flagellar motility (Goldsmith, M. et al., Cell Motil. Cytoskel. 20, 249-262 (1991)). We hypothesized that NS20 blocked motility by binding to a multifunctional motor binding domain on the microtubules (MTs), or axonemes. Here we have examined the effect of microinjecting NS20, at metaphase, into dividing PtK2 cells. Plotting chromosome separation (CS) as a function of time, we report here that CS rates for anaphase A (chromosome-to-pole movement) were reduced by approximately 50% relative to uninjected controls. CS rates for anaphase B (spindle pole elongation) were unaffected by the NS20 antiserum. The inhibition of CS rate during anaphase A by NS20 was significantly greater than the inhibition caused by a control antitubulin serum (PC5). Two possible mechanisms underlying NS20's inhibition of CS during anaphase A were considered. NS20 could block the binding of a kinetochore-associated motor to kinetochore MTs (kMTs) or, alternatively, NS20 could stabilize kMTs against depolymerization. Our results favor the first alternative. In a cold-induced depolymerization assay, NS20 had no selective stabilizing effect on MTs. Moreover, we show that NS20 can selectively block the binding of a well characterized MT-associated motor (kinesin) to MTs, in vitro. These results suggest that NS20 may be defining a unique tubulin binding domain common to the motors underlying vesicle transport, flagellar motility, and chromosome movements during anaphase A.     

Stu2 promotes mitotic spindle elongation in anaphase

During anaphase, mitotic spindles elongate up to five times their metaphase length. This process, known as anaphase B, is essential for correct segregation of chromosomes. Here, we examine the control of spindle length during anaphase in the budding yeast Saccharomyces cerevisiae. We show that microtubule stabilization during anaphase requires the microtubule-associated protein Stu2. We further show that the activity of Stu2 is opposed by the activity of the kinesin-related protein Kip3. Reexamination of the kinesin homology tree suggests that KIP3 is the S. cerevisiae orthologue of the microtubule-destabilizing subfamily of kinesins (Kin I). We conclude that a balance of activity between evolutionally conserved microtubule-stabilizing and microtubule-destabilizing factors is essential for correct spindle elongation during anaphase B.     

Nucleotide requirements for anaphase chromosome movements in permeabilized mitotic cells: anaphase B but not anaphase A requires ATP

Permeabilized PtK1 cells continue to undergo anaphase chromosome movements provided MgATP is included in the lysis medium. However, chromosome-to-pole movement (anaphase A) and spindle elongation (anaphase B) differ with respect to nucleotide requirements. The rate of anaphase B depends on the concentration of ATP in the lysis medium; two-thirds the maximal rate is observed in 0.2 mM ATP. However, other nucleotides, such as ITP, CTP and GTP, cannot substitute for ATP. Spindle elongation is blocked by the addition of nonhydrolyzable ATP analogs. ADP, AMP and inhibitors such as vanadate, the magnesium chelator EDTA and sulfhydryl reagents. Anaphase does no require exogenous ATP and is unaffected by these inhibitors. These results are consistent with "dynein-like" ATPase involvement during spindle elongation, and rule out the possibility of tubulin-dynein and actomyosin mechanochemistry during anaphase A. I suggest that chromosome-to-pole movement involves the collapse of an elastic component in the spindle. Force generation could be provided by microtubule depolymerization or by the contraction of a nonmicrotubule microtrabecular lattice.     

Direct observation of mitotic spindle elongation in vitro

Successful reactivation in vitro of anaphase B has recently been achieved with mitotic spindles isolated from the diatom Stephanopyxis turris. When a population of isolated spindles was studied indirectly by using immunofluorescence, nearly all of them were found to have elongated; however, when studied directly by using video microscopy, only a small proportion of spindles elongated. We report here conditions that allow nearly all of the spindles to elongate when observed directly with video microscopy. These direct observations validate previous ones made using indirect immunofluorescence. In addition, we find that the isolated spindles elongate with a linear rate, that the elongation is unchanged after the chromatin surrounding the spindles is digested with DNase I, and that during elongation a phase-dense matrix may accumulate in the spindle midzone.     

The Drosophila kinesin-like protein KLP3A is a midbody component required for central spindle assembly and initiation of cytokinesis

We describe here a new member of the kinesin superfamily in Drosophila, KLP3A (Kinesin-Like-Protein-at-3A). The KLP3A protein localizes to the equator of the central spindle during late anaphase and telophase of male meiosis. Mutations in the KLP3A gene disrupt the interdigitation of microtubules in spermatocyte central spindles. Despite this defect, anaphase B spindle elongation is not obviously aberrant. However, cytokinesis frequently fails after both meiotic divisions in mutant testes. Together, these findings strongly suggest that the KLP3A presumptive motor protein is a critical component in the establishment or stabilization of the central spindle. Furthermore, these results imply that the central spindle is the source of signals that initiate the cleavage furrow in higher cells.     

Distribution of phosphorylated spindle-associated proteins in the diatom Stephanopyxis turris

Mitotic spindles isolated from the diatom Stephanopyxis turris become thiophosphorylated in the presence of ATP gamma S at specific locations within the mitotic apparatus, resulting in a stimulation of ATP-dependent spindle elongation in vitro. Here, using indirect immunofluorescence, we compare the staining pattern of an antibody against thiophosphorylated proteins to that of MPM-2, an antibody against mitosis-specific phosphoproteins, in isolated spindles. Both antibodies label spindle poles, kinetochores, and the midzone. Neither antibody exhibits reduced labeling in salt-extracted spindles, although prior salt extraction inhibits thiophosphorylation in ATP gamma S. Furthermore, both antibodies recognize a 205 kd band on immunoblots of spindle extracts. Microtubule-organizing centers and mitotic spindles label brightly with the MPM-2 antibody in intact cells. These results show that functional mitotic spindles isolated from S. turris are phosphorylated both in vivo and in vitro. We discuss the possible role of phosphorylated cytoskeletal proteins in the control of mitotic spindle function.     

In vitro reactivation of spindle elongation in fission yeast nuc2 mutant cells

To investigate the mechanisms of spindle elongation and chromosome separation in the fission yeast Schizosaccharomyces pombe, we have developed an in vitro assay using a temperature-sensitive mutant strain, nuc2. At the restrictive temperature, nuc2 cells are arrested at a metaphase-like stage with short spindles and condensed chromosomes. After permeabilization of spheroplasts of the arrested cells, spindle elongation was reactivated by addition of ATP and neurotubulin both at the restrictive and the permissive temperatures, but chromosome separation was not. This suggests that the nuc2 cells are impaired in function at a stage before sister chromatid disjunction. Spindle elongation required both ATP and exogenous tubulin and was inhibited by adenylyl imidodiphosphate (AMPPNP) or vanadate. The ends of yeast half-spindle microtubules pulse-labeled with biotinylated tubulin moved past each other during spindle elongation and a gap formed between the original half-spindles. These results suggest that the primary mechanochemical event responsible for spindle elongation is the sliding apart of antiparallel microtubules of the two half-spindles.     

The kinesin-8 Kip3 scales anaphase spindle length by suppression of midzone microtubule polymerization

Mitotic spindle function is critical for cell division and genomic stability. During anaphase, the elongating spindle physically segregates the sister chromatids. However, the molecular mechanisms that determine the extent of anaphase spindle elongation remain largely unclear. In a screen of yeast mutants with altered spindle length, we identified the kinesin-8 Kip3 as essential to scale spindle length with cell size. Kip3 is a multifunctional motor protein with microtubule depolymerase, plus-end motility, and antiparallel sliding activities. Here we demonstrate that the depolymerase activity is indispensable to control spindle length, whereas the motility and sliding activities are not sufficient. Furthermore, the microtubule-destabilizing activity is required to counteract Stu2/XMAP215-mediated microtubule polymerization so that spindle elongation terminates once spindles reach the appropriate final length. Our data support a model where Kip3 directly suppresses spindle microtubule polymerization, limiting midzone length. As a result, sliding forces within the midzone cannot buckle spindle microtubules, which allows the cell boundary to define the extent of spindle elongation.     

Chromosome movement in lysed mitotic cells is inhibited by vanadate

Mitotic PtK1 cells, lysed at anaphase into a carbowax 20 M Brij 58 solution, continue to move chromosomes toward the spindle poles and to move the spindle poles apart at 50% in vivo rates for 10 min. Chromosome movements can be blocked by adding metabolic inhibitors to the lysis medium and inhibition of movement can be reversed by adding ATP to the medium. Vanadate at micromolar levels reversibly inhibits dynein ATPase activity and movement of demembranated flagella and cilia. It does not affect glycerinated myofibril contraction or myosin ATPase activty at less than millimolar concentrations. Vanadate at 10-- 100 micron reversibly inhibits anaphase movement of chromosomes and spindle elongation. After lysis in vanadate, spindles lose their fusiform appearance and become more barrel shaped. In vitro microtubule polymerization is insensitive to vanadate.     

Ultraviolet microbeam irradiations of mitotic diatoms: investigation of spindle elongation

Our simple instrumentation for generating a UV-microbeam is described UV microbeam irradiations of the central spindle in the pennate diatom Hantzschia amphioxys have been examined through correlated birefringence light microscopy and TEM. A precise correlation between the region of reduced birefringence and the UV-induced lesion in the microtubules (MTs) of the central spindle is demonstrated. The UV beam appears to dissociate MTs, as MT fragments were rarely encountered. The forces associated with metaphase and anaphase spindles have been studied via localized UV-microbeam irradiation of the central spindle. These spindles were found to be subjected to compressional forces, presumably exerted by stretched or contracting chromosomes. Comparisons are made with the results of other writers. These compressional forces caused the poles of a severed anaphase spindle to move toward each other and the center of the cell. As these poles moved centrally, the larger of the two postirradiational central spindle remnants elongated with a concomitant decrease in the length of the overlap. Metaphase spindles, in contrast, did not elongate nor lose their overlap region. Our interpretation is that the force for anaphase spindle elongation in Hantzschia is generated between half-spindles in the region of MT overlap.