Strategies for crystallizing membrane proteins

Crystallizing membrane proteins remains a challenging endeavor despite the increasing number of membrane protein structures solved by X-ray crystallography. The critical factors in determining the success of the crystallization experiments are the purification and preparation of membrane protein samples. Moreover, there is the added complication that the crystallization conditions must be optimized for use in the presence of detergents although the methods used to crystallize most membrane proteins are, in essence, straightforward applications of standard methodologies for soluble protein crystallization. The roles that detergents play in the stability and aggregation of membrane proteins as well as the colloidal properties of the protein-detergent complexes need to be appreciated and controlledbefore and during the crystallization trials. All X-ray quality crystals of membrane proteins were grown from preparations of detergent-solubilized protein, where the heterogeneous natural lipids from the membrane have been replaced by ahomogeneous detergent environment. It is the preparation of such monodisperse, isotropic solutions of membrane proteins that has allowed the successful application of the standard crystallization methods routinely used on soluble proteins. In this review, the issues of protein purification and sample preparation are addressed as well as the new refinements in crystallization methodologies for membrane proteins. How the physical behavior of the detergent, in the form of micelles or protein-detergent aggregates, affects crystallization and the adaptation of published protocols to new membrane protein systems are also addressed. The general conclusion is that many integral membrane proteins could be crystallized if pure and monodisperse preparations in a suitable detergent system can be prepared.In memory of Glenn D. Garavito.     

Rampant Exchange of the Structure and Function of Extramembrane Domains between Membrane and Water Soluble Proteins

Of the membrane proteins of known structure, we found that a remarkable 67% of the water soluble domains are structurally similar to water soluble proteins of known structure. Moreover, 41% of known water soluble protein structures share a domain with an already known membrane protein structure. We also found that functional residues are frequently conserved between extramembrane domains of membrane and soluble proteins that share structural similarity. These results suggest membrane and soluble proteins readily exchange domains and their attendant functionalities. The exchanges between membrane and soluble proteins are particularly frequent in eukaryotes, indicating that this is an important mechanism for increasing functional complexity. The high level of structural overlap between the two classes of proteins provides an opportunity to employ the extensive information on soluble proteins to illuminate membrane protein structure and function, for which much less is known. To this end, we employed structure guided sequence alignment to elucidate the functions of membrane proteins in the human genome. Our results bridge the gap of fold space between membrane and water soluble proteins and provide a resource for the prediction of membrane protein function. A database of predicted structural and functional relationships for proteins in the human genome is provided at sbi.postech.ac.kr/emdmp.     

Mass spectrometry of full-length integral membrane proteins to define functionally relevant structural features

The crystallization and structure determination of integral membrane proteins remains a difficult task relying on a good understanding of the behavior of the protein for success. To date, membrane protein structures are still far outnumbered by soluble protein structures. Mass spectrometry is a powerful and versatile tool offering deep insights into the state of the integral membrane protein the structuralist intends to crystallize. With appropriate sample preparation methods, it provides information that can sometimes prove critical at various stages of the structure determination process, from protein expression to model building. Moreover, valuable knowledge is gained when the identified structural features underlie important functional aspects. Electrospray and matrix assisted laser desorption ionization (MALDI) methods, however, face a particular challenge when dealing with integral membrane proteins. A MALDI method specifically optimized for membrane protein analysis is presented here, with detailed information on the sample preparation and deposition, as well as guidelines for domain determination by limited proteolysis. MALDI-time of flight mass spectrometry can be used to do a proper inventory of initiation sites, to tailor a protein to a stable, well-folded form, and to evaluate selenomethionine replacement. These approaches are illustrated with a few examples drawn from the structural biology of ion channels.     

Molecular dynamics simulations of discoidal bilayers assembled from truncated human lipoproteins

Human apolipoprotein A-1 (apo A-1) is the major protein component of high-density lipoproteins. The apo A-1 lipid-binding domain was used as a template for the synthesis of amphipathic helical proteins termed membrane scaffold proteins, employed to self-assemble soluble monodisperse discoidal particles called Nanodiscs. In these particles, membrane scaffold proteins surround a lipid bilayer in a belt-like fashion forming bilayer disks of discrete size and composition. Here we investigate the structure of Nanodiscs through molecular dynamics simulations in which Nanodiscs were built from scaffold proteins of various lengths. The simulations showed planar or deformed Nanodiscs depending on optimal length and alignment of the scaffold proteins. Based on mean surface area per lipid calculations, comparison of small-angle x-ray scattering curves, and the relatively planar shape of Nanodiscs made from truncated scaffold proteins, one can conclude that the first 17 to 18 residues of the 200-residue apo A-1 lipid-binding domain are not involved in formation of the protein "belts" surrounding the lipid bilayer. To determine whether the addition of an integral membrane protein has an effect on the overall structure of a Nanodisc, bacteriorhodopsin was embedded into a Nanodisc and simulated using molecular dynamics, revealing a planar disk with a slightly rectangular shape.     

Vectorially oriented membrane protein monolayers: profile structures via x-ray interferometry/holography.

X-ray interferometry/holography was applied to meridional x-ray diffraction data to determine uniquely the profile structures of a single monolayer of an integral membrane protein and a peripheral membrane protein, each tethered to the surface of a solid inorganic substrate. Bifunctional, organic self-assembled monolayers (SAMs) were utilized to tether the proteins to the surface of Ge/Si multilayer substrates, fabricated by molecular beam epitaxy, to facilitate the interferometric/holographic x-ray structure determination. The peripheral membrane protein yeast cytochrome c was covalently tethered to the surface of a sulfhydryl-terminated 11-siloxyundecanethiol SAM via a disulfide linkage with residue 102. The detergent-solubilized, photosynthetic reaction center integral membrane protein was electrostatically tethered to the surface of an analogous amine-terminated SAM. Optical absorption measurements performed on these two tethered protein monolayer systems were consistent with the x-ray diffraction results indicating the reversible formation of densely packed single monolayers of each fully functional membrane protein on the surface of the respective SAM. The importance of utilizing the organic self-assembled monolayers (as opposed to Langmuir-Blodgett) lies in their ability to tether specifically both soluble peripheral membrane proteins and detergent-solubilized integral membrane proteins. The vectorial orientations of the cytochrome c and the reaction center molecules were readily distinguishable in the profile structure of each monolayer at a spatial resolution of 7 A.     

A pedestrian guide to membrane protein crystallization

Membrane protein structural biology is a frontier area of modern biomedical research. Twenty to thirty-five percent of the proteins encoded by an organism's genome are integral membrane proteins. Integral membrane proteins, such as channels, transporters, and receptors, are critical components of many fundamental biological processes. Also, many integral membrane proteins are important in biomedical and biotechnological applications; the majority of drug targets are integral membrane proteins. The sharp increase in the number of membrane protein structures over the last several years gives some indication that this field is poised for rather explosive growth as more and more investigators take on membrane protein projects. The purpose of this brief practical review was to take a snapshot of a field at the onset of its likely exponential growth phase, and to lay out the methods that have worked to date for obtaining membrane protein crystals suitable for structure determination by X-ray crystallography. Many of the successful experimental methods are identical to those used for soluble proteins. The major difference, and a non-trivial difference, is the necessity for inclusion of detergents above the critical micelle concentration in the purified membrane protein solution.     

An efficient strategy for high-throughput expression screening of recombinant integral membrane proteins

The recombinant expression of integral membrane proteins is considered a major challenge, and together with the crystallization step, the major hurdle toward routine structure determination of membrane proteins. Basic methodologies for high-throughput (HTP) expression optimization of soluble proteins have recently emerged, providing statistically significant success rates for producing such proteins. Experimental procedures for handling integral membrane proteins are generally more challenging, and there have been no previous comprehensive reports of HTP technology for membrane protein production. Here, we present a generic and integrated parallel HTP strategy for cloning and expression screening of membrane proteins in their detergent solubilized form. Based on this strategy, we provide overall success rates for membrane protein production in Escherichia coli, as well as initial benchmarking statistics of parameters such as expression vectors, strains, and solubilizing detergents. The technologies were applied to 49 E. coli integral membrane proteins with human homologs and revealed that 71% of these proteins could be produced at sufficient levels to allow milligram amounts of protein to be relatively easily purified, which is a significantly higher success rate than anticipated. We attribute the high success rate to the quality and robustness of the methodology used, and to introducing multiple parameters such as different vectors, strains, and detergents. The presented strategy demonstrates the usefulness of HTP technologies for membrane protein production, and the feasibility of large-scale programs for elucidation of structure and function of bacterial integral membrane proteins.     

Differential trafficking of soluble and integral membrane secretory granule-associated proteins

The posttranslational processing enzyme peptidylglycine alpha-amidating monooxygenase (PAM) occurs naturally in integral membrane and soluble forms. With the goal of understanding the targeting of these proteins to secretory granules, we have compared the maturation, processing, secretion, and storage of PAM proteins in stably transfected AtT-20 cells. Integral membrane and soluble PAM proteins exit the ER and reach the Golgi apparatus with similar kinetics. Biosynthetic labeling experiments demonstrated that soluble PAM proteins were endoproteolytically processed to a greater extent than integral membrane PAM; this processing occurred in the regulated secretory pathway and was blocked by incubation of cells at 20 degrees C. 16 h after a biosynthetic pulse, a larger proportion of soluble PAM proteins remained cell-associated compared with integral membrane PAM, suggesting that soluble PAM proteins were more efficiently targeted to storage granules. The nonstimulated secretion of soluble PAM proteins peaked 1-2 h after a biosynthetic pulse, suggesting that release was from vesicles which bud from immature granules during the maturation process. In contrast, soluble PAM proteins derived through endoproteolytic cleavage of integral membrane PAM were secreted in highest amount during later times of chase. Furthermore, immunoprecipitation of cell surface-associated integral membrane PAM demonstrated that very little integral membrane PAM reached the cell surface during early times of chase. However, when a truncated PAM protein lacking the cytoplasmic tail was expressed in AtT-20 cells, > 50% of the truncated PAM-1 protein reached the cell surface within 3 h. We conclude that the trafficking of integral membrane and soluble secretory granule-associated enzymes differs, and that integral membrane PAM proteins are less efficiently retained in maturing secretory granules.     

Role of the N-terminal domain of the calcitonin receptor-like receptor in ligand binding

Calcitonin receptor-like receptor (CRLR) is a seven-transmembrane (7-TM) domain class B G protein-coupled receptor (GPCR) which requires coexpression of different receptor activity modifying proteins (RAMP) to become a functional calcitonin gene-related peptide (CGRP) receptor or an adrenomedullin (AM) receptor. The N-terminal (Nt) extracellular region of class B GPCRs in ligand binding has been reported for receptors such as glucagon and parathyroid hormone. We hypothesize that the Nt-domain of CRLR (Nt-CRLR) is an autonomously folded unit possessing a well-defined structure and is involved in ligand binding and specificity. To obtain structural and functional information on the Nt-CRLR, we cloned and expressed the Nt-CRLR as a fusion protein in Escherichia coli. Overexpressed protein formed an inclusion body, which was refolded and purified, resulting in a soluble monomeric protein. Far-UV CD and fluorescence spectra of Nt-CRLR showed characteristics of a folded protein. The ability of Nt-CRLR to bind CGRP and AM independent of RAMPs was determined by studying inhibition of (125)I-CGRP and (125)I-AM binding to pregnant rat uterine membrane in the presence of Nt-CRLR protein. We observe that Nt-CRLR inhibits (125)I-CGRP and (125)I-AM binding to rat uterus in a dose-dependent fashion (IC(50) = 0.25 and 0.29 muM, respectively). Taken together, our data provide evidence that Nt-CRLR is structured and further that a significant part of the binding affinity comes from binding to the Nt-domain.     

Evaluation of detergents for the soluble expression of alpha-helical and beta-barrel-type integral membrane proteins by a preparative scale individual cell-free expression system

Cell-free expression has become a highly promising tool for the fast and efficient production of integral membrane proteins. The proteins can be produced as precipitates that solubilize in mild detergents usually without any prior denaturation steps. Alternatively, membrane proteins can be synthesized in a soluble form by adding detergents to the cell-free system. However, the effects of a representative variety of detergents on the production, solubility and activity of a wider range of membrane proteins upon cell-free expression are currently unknown. We therefore analyzed the cell-free expression of three structurally very different membrane proteins, namely the bacterial alpha-helical multidrug transporter, EmrE, the beta-barrel nucleoside transporter, Tsx, and the porcine vasopressin receptor of the eukaryotic superfamily of G-protein coupled receptors. All three membrane proteins could be produced in amounts of several mg per one ml of reaction mixture. In general, the detergent 1-myristoyl-2-hydroxy-sn-glycero-3-[phospho-rac-(1-glycerol)] was found to be most effective for the resolubilization of membrane protein precipitates, while long chain polyoxyethylene-alkyl-ethers proved to be most suitable for the soluble expression of all three types of membrane proteins. The yield of soluble expressed membrane protein remained relatively stable above a certain threshold concentration of the detergents. We report, for the first time, the high-level cell-free expression of a beta-barrel type membrane protein in a functional form. Structural and functional variations of the analyzed membrane proteins are evident that correspond with the mode of expression and that depend on the supplied detergent.     

Expression, purification, and characterization of Thermotoga maritima membrane proteins for structure determination

Structural studies of integral membrane proteins typically rely upon detergent micelles as faithful mimics of the native lipid bilayer. Therefore, membrane protein structure determination would be greatly facilitated by biophysical techniques that are capable of evaluating and assessing the fold and oligomeric state of these proteins solubilized in detergent micelles. In this study, an approach to the characterization of detergent-solubilized integral membrane proteins is presented. Eight Thermotoga maritima membrane proteins were screened for solubility in 11 detergents, and the resulting soluble protein-detergent complexes were characterized with small angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD) spectroscopy, and chemical cross-linking to evaluate the homogeneity, oligomeric state, radius of gyration, and overall fold. A new application of SAXS is presented, which does not require density matching, and NMR methods, typically used to evaluate soluble proteins, are successfully applied to detergent-solubilized membrane proteins. Although detergents with longer alkyl chains solubilized the most proteins, further characterization indicates that some of these protein-detergent complexes are not well suited for NMR structure determination due to conformational exchange and protein oligomerization. These results emphasize the need to screen several different detergents and to characterize the protein-detergent complex in order to pursue structural studies. Finally, the physical characterization of the protein-detergent complexes indicates optimal solution conditions for further structural studies for three of the eight overexpressed membrane proteins.     

Membrane protein assembly into Nanodiscs

Nanodiscs are soluble nanoscale phospholipid bilayers which can self-assemble integral membrane proteins for biophysical, enzymatic or structural investigations. This means for rendering membrane proteins soluble at the single molecule level offers advantages over liposomes or detergent micelles in terms of size, stability, ability to add genetically modifiable features to the Nanodisc structure and ready access to both sides of the phospholipid bilayer domain. Thus the Nanodisc system provides a novel platform for understanding membrane protein function. We provide an overview of the Nanodisc approach and document through several examples many of the applications to the study of the structure and function of integral membrane proteins.     

A new classification of membrane protein crystals

Although being much smaller than the number of soluble proteins in the Protein Data Bank, the number of membrane proteins therein now approaches 700, and a statistical analysis becomes meaningful. Such an analysis showed that the conventional subdivision into monotopic, β-barrel and α-helical membrane proteins is appropriate but should be amended by a classification according to the detergent micelle structure in the crystal, which can be derived from the packing of the membrane-immersed parts of the proteins. The crystal packing density is specific for the three conventional types of membrane proteins and soluble proteins. It is also specific for three observed detergent arrangements that are micelle pockets, micelle filaments and micelle sheets, demonstrating that the detergent structure affects crystallization. The packing density distribution of crystals from integral membrane proteins has approximately the same shape as that of soluble proteins but is by a factor of two broader and shifted to lower density. It seems unlikely that the differences can be explained by a mere solvent expansion due to the required detergent. The crystallized membrane proteins were further analyzed with respect to protein mass, oligomerization and crystallographic asymmetric unit, space group, crystal ordering and symmetry. The results provide a new view on membrane proteins.     

Collection of soluble variants of membrane proteins for transcriptomics and proteomics

The existence of a soluble splice variant for a gene encoding a transmembrane protein suggests that this gene plays a role in intercellular signalling, particularly in immunological processes. Also, the absence of a splice variant of a reported soluble variant suggests exclusive control of the solubilisation by proteolytic cleavage. Soluble splice variants of membrane proteins may also be interesting targets for crystallisation as their structure may be expected to preserve, at least partially, their function as integral membrane proteins, whose structures are most difficult to determine. This paper presents a dataset derived from the literature in an attempt to collect all reported soluble variants of membrane proteins, be they splice variants or shedded. A list of soluble variants is derived in silico from Ensembl. These are checked on their presence in multiple organisms and their number of membranespanning regions is inspected. The findings then are confirmed by a comparison with identified proteins of a recent global proteomics study of human blood plasma. Finally, a tool to determine novel soluble variants by proteomics is provided.     

Use of modular substrates demonstrates mechanistic diversity and reveals differences in chaperone requirement of ERAD

The endoplasmic reticulum (ER) harbors a protein quality control system, which monitors protein folding in the ER. Elimination of malfolded proteins is an important function of this protein quality control. Earlier studies with various soluble and transmembrane ER-associated degradation (ERAD) substrates revealed differences in the ER degradation machinery used. To unravel the nature of these differences we generated two type I membrane ERAD substrates carrying malfolded carboxypeptidase yscY (CPY*) as the ER-luminal ERAD recognition motif. Whereas the first, CT* (CPY*-TM), has no cytoplasmic domain, the second, CTG*, has the green fluorescent protein present in the cytosol. Together with CPY*, these three substrates represent topologically diverse malfolded proteins, degraded via ERAD. Our data show that degradation of all three proteins is dependent on the ubiquitin-proteasome system involving the ubiquitin-protein ligase complex Der3/Hrd1p-Hrd3p, the ubiquitin conjugating enzymes Ubc1p and Ubc7p, as well as the AAA-ATPase complex Cdc48-Ufd1-Npl4 and the 26S proteasome. In contrast to soluble CPY*, degradation of the membrane proteins CT* and CTG* does not require the ER proteins Kar2p (BiP) and Der1p. Instead, CTG* degradation requires cytosolic Hsp70, Hsp40, and Hsp104p chaperones.     

Conformational preference functions for predicting helices in membrane proteins

A suite of FORTRAN programs, PREF, is described for calculating preference functions from the data base of known protein structures and for comparing smoothed profiles of sequence-dependent preferences in proteins of unknown structure. Amino acid preferences for a secondary structure are considered as functions of a sequence environment. Sequence environment of amino acid residue in a protein is defined as an average over some physical, chemical, or statistical property of its primary structure neighbors. The frequency distribution of sequence environments in the data base of soluble protein structures is approximately normal for each amino acid type of known secondary conformation. An analytical expression for the dependence of preferences on sequence environment is obtained after each frequency distribution is replaced by corresponding Gaussian function. The preference for the α-helical conformation increases for each amino acid type with the increase of sequence environment of buried solvent-accessible surface areas. We show that a set of preference functions based on buried surface area is useful for predicting folding motifs in α-class proteins and in integral membrane proteins. The prediction accuracy for helical residues is 79% for 5 integral membrane proteins and 74% for 11 α-class soluble proteins. Most residues found in transmembrane segments of membrane proteins with known α-helical structure are predicted to be indeed in the helical conformation because of very high middle helix preferences. Both extramembrane and transmembrane helices in the photosynthetic reaction center M and L subunits are correctly predicted. We point out in the discussion that our method of conformational preference functions can identify what physical properties of the amino acids are important in the formation of particular secondary structure elements. © 1993 John Wiley & Sons, Inc.     

The phosphate carrier has an ability to be sorted to either the TIM22 pathway or the TIM23 pathway for its import into yeast mitochondria

Most mitochondrial proteins are synthesized in the cytosol, imported into mitochondria via the TOM40 (translocase of the mitochondrial outer membrane 40) complex, and follow several distinct sorting pathways to reach their destination submitochondrial compartments. Phosphate carrier (PiC) is an inner membrane protein with 6 transmembrane segments (TM1-TM6) and requires, after translocation across the outer membrane, the Tim9-Tim10 complex and the TIM22 complex to be inserted into the inner membrane. Here we analyzed an in vitro import of fusion proteins between various PiC segments and mouse dihydrofolate reductase. The fusion protein without TM1 and TM2 was translocated across the outer membrane but was not inserted into the inner membrane. The fusion proteins without TM1-TM4 were not inserted into the inner membrane but instead translocated across the inner membrane. Functional defects of Tim50 of the TIM23 complex caused either by depletion of the protein or the addition of anti-Tim50 antibodies blocked translocation of the fusion proteins without TM1-TM4 across the inner membrane, suggesting that lack of TM1-TM4 led to switch of its sorting pathway from the TIM22 pathway to the TIM23 pathway. PiC thus appears to have a latent signal for sorting to the TIM23 pathway, which is exposed by reduced interactions with the Tim9-Tim10 complex and maintenance of the import competence.     

Comparison of SDS- and methanol-assisted protein solubilization and digestion methods for Escherichia coli membrane proteome analysis by 2-D LC-MS/MS

Both organic solvent and surfactant have been used for dissolving membrane proteins for shotgun proteomics. In this work, two methods of protein solubilization, namely using 60% methanol or 1% SDS, to dissolve and analyze the inner membrane fraction of an Escherichia coli K12 cell lysate were compared. A total of 358 proteins (1417 unique peptides) from the methanol-solubilized protein mixture and 299 proteins (892 peptides) from the SDS-solubilized sample-were identified by using trypsin digestion and 2-D LC-ESI MS/MS. It was found that the methanol method detected more hydrophobic peptides, resulting in a greater number of proteins identified, than the SDS method. We found that 159 out of 358 proteins (44%) and 120 out of 299 proteins (40%) detected from the methanol- and SDS-solubilized samples, respectively, are integral membrane proteins. Among the 190 integral membrane proteins 70 were identified exclusively in the methanol-solubilized sample, 89 were identified by both methods, and only 31 proteins were exclusively identified by the SDS method. It is shown that the integral membrane proteins reflected the theoretical proteome for number of transmembrane helices, length, functional class, and topology, indicating there was no bias in the proteins identified.     

A class of mild surfactants that keep integral membrane proteins water-soluble for functional studies and crystallization

Mixed protein-surfactant micelles are used for in vitro studies and 3D crystallization when solutions of pure, monodisperse integral membrane proteins are required. However, many membrane proteins undergo inactivation when transferred from the biomembrane into micelles of conventional surfactants with alkyl chains as hydrophobic moieties. Here we describe the development of surfactants with rigid, saturated or aromatic hydrocarbon groups as hydrophobic parts. Their stabilizing properties are demonstrated with three different integral membrane proteins. The temperature at which 50% of the binding sites for specific ligands are lost is used as a measure of stability and dodecyl-β-D-maltoside ('C12-b-M') as a reference for conventional surfactants. One surfactant increased the stability of two different G protein-coupled receptors and the human Patched protein receptor by approximately 10°C compared to C12-b-M. Another surfactant yielded the highest stabilization of the human Patched protein receptor compared to C12-b-M (13°C) but was inferior for the G protein-coupled receptors. In addition, one of the surfactants was successfully used to stabilize and crystallize the cytochrome b(6?)f complex from Chlamydomonas reinhardtii. The structure was solved to the same resolution as previously reported in C12-b-M.     

Isolation and functional reconstitution of soluble melibiose permease from Escherichia coli

By use of techniques described recently for lac permease [Roepe, P.D., & Kaback, H.R. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 6087], the melibiose permease from Escherichia coli, another polytopic integral plasma membrane protein, has been purified in a metastable soluble form after overexpression of the melB gene via the T7 RNA polymerase system. As demonstrated with lac permease, soluble melibiose permease is dissociated from the membrane with 5.0 M urea and appears to remain soluble in phosphate buffer at neutral pH after removal of urea by dialysis, although the protein aggregates in a time- and concentration-dependent fashion. Moreover, soluble melibiose permease behaves as a monomer during purification by size exclusion chromatography in the presence of urea. Circular dichroism of purified soluble melibiose permease reveals that the protein is highly helical in potassium phosphate buffer and that secondary structure is disrupted in 5.0 M urea. Finally, purified melibiose permease can be reconstituted into proteoliposomes, and the preparations catalyze membrane potential driven H+/melibiose or Na+/methyl 1-thio-beta,D-galactopyranoside symport. The results provide further support for the notion that hydrophobic transmembrane proteins may be able to assume a nondenatured conformation in aqueous solution and extend the implication that the approach described may represent a general method for rapid isolation and reconstitution of this class of membrane proteins.