Quantitative trait loci for chemical body composition traits in pigs and their positional associations with body tissues, growth and feed intake

In this study, quantitative trait loci (QTL) for chemical and physical body composition, growth and feed intake in pigs were identified in a three-generation full-sib population, developed by crossing Pietrain sires with a commercial dam line. Phenotypic data from 315 F₂ animals were available for protein and lipid deposition measured in live animals by the deuterium dilution technique at 30-, 60-, 90-, 120- and 140-kg body weight. At 140-kg body weight, carcass characteristics were measured by the AutoFOM grading system and after dissection. Three hundred and eighty-six animals from 49 families were genotyped for 51 molecular markers covering chromosomes SSC2, SSC4, SSC8, SSC9, SSC10 and SSC14. Novel QTL for protein (lipid) content at 60-kg body weight and protein (lipid) accretion from 120 to 140 kg were detected on SSC9 near several previously detected QTL for lean and fat tissue in neck, shoulder and ham cuts. Another QTL for lipid accretion was found on SSC8, closely associated with a QTL for intramuscular fat content. QTL for daily feed intake were detected on SSC2 and SSC10. The favourable allele of a QTL for food conversion ratio (FCR) on SSC2 was associated with alleles for increased lean tissue and decreased fat tissue. Because no QTL for growth rate were found in the region, the QTL for FCR is most likely due to a change in body composition. These QTL provide insights into the genomic regulation of chemical or physical body composition and its association with feed intake, feed efficiency and growth.     

Results of a whole-genome quantitative trait locus scan for growth, carcass composition and meat quality in a porcine four-way cross

A whole-genome quantitative trait locus (QTL) scan for 31 phenotypes related to growth, carcass composition and meat quality was conducted using 1187 progeny of a commercial four-way cross. Animals were genotyped for 198 microsatellite markers that spanned the entire porcine genome. QTL analysis was conducted to extract information from paternal and maternal meioses separately using a rank-based nonparametric approach for half-sib designs. Nine QTL exceeded genome-wide significance: one QTL affecting growth (average daily gain on SSC1), two QTL influencing carcass composition (fatness on SSC3 and muscle mass on SSC15) and six QTL influencing meat quality (tenderness on SSC4 and SSC14; colour on SSC5, SSC6 and SSCX; and conductivity on SSC16). All but one of these coincided with previously reported QTL. In addition, we present evidence for 78 suggestive QTL with a combined false discovery rate of 40%.     

Detection of quantitative trait loci for carcass composition traits in pigs

A quantitative trait locus (QTL) analysis of carcass composition data from a three-generation experimental cross between Meishan (MS) and Large White (LW) pig breeds is presented. A total of 488 F2 males issued from six F1 boars and 23 F1 sows, the progeny of six LW boars and six MS sows, were slaughtered at approximately 80 kg live weight and were submitted to a standardised cutting of the carcass. Fifteen traits, i.e. dressing percentage, loin, ham, shoulder, belly, backfat, leaf fat, feet and head weights, two backfat thickness and one muscle depth measurements, ham + loin and back + leaf fat percentages and estimated carcass lean content were analysed. Animals were typed for a total of 137 markers covering the entire porcine genome. Analyses were performed using a line-cross (LC) regression method where founder lines were assumed to be fixed for different QTL alleles and a half/full sib (HFS) maximum likelihood method where allele substitution effects were estimated within each half-/full-sib family. Additional analyses were performed to search for multiple linked QTL and imprinting effects. Significant gene effects were evidenced for both leanness and fatness traits in the telomeric regions of SSC 1q and SSC 2p, on SSC 4, SSC 7 and SSC X. Additional significant QTL were identified for ham weight on SSC 5, for head weight on SSC 1 and SSC 7, for feet weight on SSC 7 and for dressing percentage on SSC X. LW alleles were associated with a higher lean content and a lower fat content of the carcass, except for the fatness trait on SSC 7. Suggestive evidence of linked QTL on SSC 7 and of imprinting effects on SSC 6, SSC 7, SSC 9 and SSC 17 were also obtained.     

A QTL affecting daily feed intake maps to Chromosome 2 in pigs

Our understanding of the molecular genetic basis of several key performance traits in pigs has been significantly advanced through the quantitative trait loci (QTL) mapping approach. However, in contrast to growth and fatness traits, the genetic basis of feed intake traits has rarely been investigated through QTL mapping. Since feed intake is an important component of efficient pig production, the identification of QTL affecting feed intake may lead to the identification of genetic markers that can be used in selection programs. In this study a QTL analysis for feed intake, feeding behavior, and growth traits was performed in an F₂ population derived from a cross between Chinese Meishan and European Large White pigs. A QTL with a significant effect on daily feed intake (DFI) was identified on Sus scrofa Chromosome 2 (SSC2). A number of suggestive QTL with effects on daily gain, feed conversion, and feeding behavior traits were also located. The significant QTL lies close to a previously identified mutation in the insulin-like growth factor 2 gene (IGF2) that affects carcass composition traits, although the IGF2 mutation is not segregating in the populations analyzed in the current study. Therefore, a distinct causal variant may exist on the P arm of SSC2 with an effect on feed intake.     

Microsatellite mapping of quantitative trait loci affecting meat quality, stress hormones and production traits in Duroc × Large White F2 pigs

An F2 cross between Duroc and Large White pigs was carried out in order to detect quantitative trait loci (QTL) for 11 meat quality traits (L*, a* and b* Minolta coordinates and water-holding capacity (WHC) of two ham muscles, ultimate pH of two ham and one loin muscles), 13 production traits (birth weight, average daily gain during post-weaning and fattening periods, carcass fat depths at three locations, estimated lean meat content, carcass length and weights of five carcass cuts) and three stress hormone-level traits (cortisol, adrenaline and noradrenaline). Animals from the three generations of the experimental design (including 456 F2 pigs) were genotyped for 91 microsatellite markers covering all the autosomes. A total of 56 QTL were detected: 49 reached the chromosome-wide level (suggestive QTL with a maximal probability of 0.05) and seven were significant at the genome-wide level (with a probability varying from 6 × 10(-4) to 3 × 10(-3)). Twenty suggestive QTL were identified for ultimate pH, colour measurements and WHC on chromosome (SSC) 5, 6, 7, 8, 9, 11, 13, 14, 15 and 17. For production traits, 33 QTL were detected on all autosomes except SSC6, 8 and 9. Seven of these QTL, located on SSC2, 3, 10, 13, 16 and 17, exceeded the genome-wide significance threshold. Finally, three QTL were identified for levels of stress hormones: a QTL for cortisol level on SSC7 in the cortisol-binding globulin gene region, a QTL for adrenaline level on SSC10 and a QTL for noradrenaline level on SSC13. Among all the detected QTL, seven are described for the first time: a QTL for ultimate pH measurement on SSC5, two QTL affecting birth weight on SSC2 and 10, two QTL for growth rate on SSC15 (during fattening) and 17 (during post-weaning) and two QTL affecting the adrenaline and noradrenaline levels. For each QTL, only one to five of the six F1 sires were found to be heterozygous. It means that all QTL are segregating in at least one of the founder populations used in this study. These results suggest that both meat quality and production traits can be improved in purebred Duroc and Large White pigs through marker-assisted selection. It is of particular interest for meat quality traits, which are difficult to include in classical selection programmes.     

Detecting QTL for feed intake traits and other performance traits in growing pigs in a Piétrain-Large White backcross

Knowing the large difference in daily feed intake (DFI) between Large White (LW) and Piétrain (PI) growing pigs, a backcross (BC) population has been set up to map QTL that could be used in marker assisted selection strategies. LW × PI boars were mated with sows from two LW lines to produce 16 sire families. A total of 717 BC progeny were fed ad libitum from 30 to 108 kg BW using single-place electronic feeders. A genome scan was conducted using genotypes for the halothane gene and 118 microsatellite markers spread on the 18 porcine autosomes. Interval mapping analyses were carried out, assuming different QTL alleles between sire families to account for within breed variability using the QTLMap software. The effects of the halothane genotype and of the dam line on the QTL effect estimates were tested. One QTL for DFI (P < 0.05 at the chromosome-wide (CW) level) and one QTL for feed conversion ratio (P < 0.01 at the CW level) were mapped to chromosomes SSC6 - probably due to the halothane alleles - and SSC7, respectively. Three putative QTL for feed intake traits were detected (P < 0.06 at the CW level) on SSC2, SSC7 and SSC9. QTL on feeding traits had effects in the range of 0.20 phenotypic s.d. The relatively low number of QTL detected for these traits suggests a large QTL allele variability within breeds and/or low effects of individual loci. Significant QTL were detected for traits related to carcass composition on chromosomes SSC6, SSC15 and SSC17, and to meat quality on chromosome SSC6 (P < 0.01 at the genome-wide level). QTL effects for body composition on SSC13 and SSC17 differed according to the LW dam line, which confirmed that QTL alleles were segregating in the LW breed. An epistatic effect involving the halothane locus and a QTL for loin weight on SSC7 was identified, the estimated substitution effects for the QTL differing by 200 g between Nn and NN individuals. The interactions between QTL alleles and genetic background or particular genes suggest further work to validate QTL segregations in the populations where marker assisted selection for the QTL would be applied.     

Quantitative trait loci analysis of a Duroc commercial population highlights differences in the genetic determination of meat quality traits at two different muscles

We performed a whole‐genome scan with 110 informative microsatellites in a commercial Duroc population for which growth, fatness, carcass and meat quality phenotypes were available. Importantly, meat quality traits were recorded in two different muscles, that is, gluteus medius (GM) and longissimus thoracis et lumborum (LTL), to find out whether these traits are determined by muscle‐specific genetic factors. At the whole‐population level, three genome‐wide QTL were identified for carcass weight (SSC7, 60 cM), meat redness (SSC13, 84 cM) and yellowness (SSC15, 108 cM). Within‐family analyses allowed us to detect genome‐wide significant QTL for muscle loin depth between the 3rd and 4th ribs (SSC15, 54 cM), backfat thickness (BFT) in vivo (SSC10, 58 cM), ham weight (SSC9, 69 cM), carcass weight (SSC7, 60 cM; SSC9, 68 cM), BFT on the last rib (SSC11, 48 cM) and GM redness (SSC8, 85 cM; SSC13, 84 cM). Interestingly, there was low positional concordance between meat quality QTL maps obtained for GM and LTL. As a matter of fact, the three genome‐wide significant QTL for colour traits (SSC8, SSC13 and SSC15) that we detected in our study were all GM specific. This result suggests that QTL effects might be modulated to a certain extent by genetic and environmental factors linked to muscle function and anatomical location.     

Detection of quantitative trait loci for growth- and fatness-related traits in a large-scale White Duroc × Erhualian intercross pig population

Growth and fatness are economically important traits in pigs. In this study, a genome scan was performed to detect quantitative trait loci (QTL) for 14 growth and fatness traits related to body weight, backfat thickness and fat weight in a large-scale White Duroc × Erhualian F(2) intercross. A total of 76 genome-wide significant QTL were mapped to 16 chromosomes. The most significant QTL was found on pig chromosome (SSC) 7 for fatness with unexpectedly small confidence intervals of ～2 cM, providing an excellent starting point to identify causal variants. Common QTL for both fatness and growth traits were found on SSC4, 5, 7 and 8, and shared QTL for fat deposition were detected on SSC1, 2 and X. Time-series analysis of QTL for body weight at six growth stages revealed the continuously significant effects of the QTL on SSC4 at the fattening period and the temporal-specific expression of the QTL on SSC7 at the foetus and fattening stages. For fatness traits, Chinese Erhualian alleles were associated with increased fat deposition except that at the major QTL on SSC7. For growth traits, most of White Duroc alleles enhanced growth rates except for those at three significant QTL on SSC6, 7 and 9. The results confirmed many previously reported QTL and also detected novel QTL, revealing the complexity of the genetic basis of growth and fatness in pigs.     

Results of a whole genome scan targeting QTL for growth and carcass traits in a Piétrain × Large White intercross

We herein report the results of a whole genome scan performed in a Piétrain × Large White intercross counting 525 offspring to map QTL influencing economically important growth and carcass traits. We report experiment-wide significant lod scores (> 4.6 for meatiness and fat deposition on chromosome SSC2, and for average daily gain and carcass length on chromosome SSC7. Additional suggestive lod scores (> 3.3) for fat deposition are reported on chromosomes SSC1, SSC7 and SSC13. A significant dominance deviation was found for the QTL on SSC1, while the hypothesis of an additive QTL could not be rejected for the QTL on SSC7 and SSC13. No evidence for imprinted QTL could be found for QTL other than the one previously reported on SSC2.     

A genome scan reveals QTL for growth, fatness, leanness and meat quality in a Duroc-Pietrain resource population

We performed a genome-wide QTL scan for production traits in a line cross between Duroc and Pietrain breeds of pigs, which included 585 F(2) progeny produced from 31 full-sib families genotyped with 106 informative microsatellites. A linkage map covering all 18 autosomes and spanning 1987 Kosambi cM was constructed. Thirty-five phenotypic traits including body weight, growth, carcass composition and meat quality traits were analysed using least square regression interval mapping. Twenty-four QTL exceeded the genome-wide significance threshold, while 47 QTL reached the suggestive threshold. These QTL were located at 28 genomic regions on 16 autosomal chromosomes and QTL in 11 regions were significant at the genome-wide level. A QTL affecting pH value in loin was detected on SSC1 between marker-interval S0312-S0113 with strong statistical support (P < 3.0 x 10(-14)); this QTL was also associated with meat colour and conductivity. QTL for carcass composition and average daily gain was also found on SSC1, suggesting multiple QTL. Seventeen genomic segments had only a single QTL that reached at least suggestive significance. Forty QTL exhibited additive inheritance whereas 31 QTL showed (over-) dominance effects. Two QTL for trait backfat thickness were detected on SSC2; a significant paternal effect was found for a QTL in the IGF2 region while another QTL in the middle of SSC2 showed Mendelian expression.     

Evaluation of the porcine melanocortin 4 receptor (MC4R) gene as a positional candidate for a fatness QTL in a cross between Landrace and Hampshire

Melanocortin 4 receptor (MC4R) is expressed in the appetite-regulating areas of the brain where it is central in the regulation of feed intake and energy balance. A mutation in MC4R causing an Asp298Asn substitution has been associated with fatness, high daily gain and feed intake in the pig. In a previously performed genome scan based on a Hampshire x Landrace cross, we detected one quantitative trait loci (QTL) affecting carcass fat/meat ratio and one QTL affecting the biceps femoris muscle, both close to the position of MC4R on porcine chromosome 1. In this study, the two lines were found to be close to fixation for alternative alleles of the Asp298Asn polymorphism. Additional QTL analyses supported our hypothesis of MC4R as a positional candidate gene but only for the fat/meat QTL. The Asp298Asn polymorphism was also evaluated as a selection target for daily gain in a Danish pig breeding population that included four breeds (Hampshire, Duroc, Landrace and Yorkshire). Over a 12-year period (1990-2002), a significant increase in the allele frequency of 298Asn was found in Landrace and Duroc, whereas a non-significant decrease in the 298Asn allele frequency was observed in Yorkshire. The Hampshire breed was fixed for the 298Asn allele in 1990. The high 298Asn allele frequencies in Hampshire, Landrace and Duroc are most likely due to selection for daily gain, whereas selection for daily gain in the Yorkshire breed apparently focuses on other loci.     

Genome-wide association studies for seven production traits highlight genomic regions useful to dissect dry-cured ham quality and production traits in Duroc heavy pigs

Protected designation of origin dry-cured hams are obtained from heavy pigs (slaughtered at about 160 kg of live weight). A specific breeding program designed to improve meat quality for this production has included as key traits the level of intermuscular fat between the leg muscles and ham weight loss during the seasoning period together with a balance between fat and lean cuts. In this study we carried out genome-wide association studies for seven traits used in the genetic merit of Italian Duroc heavy pigs, five related to meat and carcass quality traits (visible intermuscular fat, ham weight loss at first salting, backfat thickness, ham weight and lean cuts), and two related to performance and efficiency traits (average daily gain and feed : gain ratio). A total of 573 performance-tested pigs were genotyped with the Illumina PorcineSNP60 BeadChip and genome-wide association analyses were carried out using the Bayes B approach with the 1 Mb window option of GenSel and random residuals for each of the seven traits. Detected windows were supported by independent single nucleotide polymorphism analyses with a linear mixed model (LMM) approach on the same animals for the same traits. A total of 30 windows identifying different quantitative trait loci (QTL) were detected and among those, 27 were confirmed by LMM in one of these traits. Among the confirmed windows, three QTL were reported for visible intermuscular fat, seven for ham weight loss at first salting and five and four for backfat thickness and lean cut, respectively. A total of eight QTL were detected for the other production traits. No overlapping QTL were reported except for one window on porcine chromosome 10 between lean cuts and ham weight that contained the CACNB2 gene that has been already associated with loin marbling score in other Duroc pigs. Several regions contained genes that have been already associated with production traits in other pig breeds, including Duroc lines, related to fat deposition or muscle structure. This work reports, for the first time, genome-wide association study results for several traits in Italian Duroc heavy pigs. These results will be useful to dissect the genetic basis for dry-cured ham production traits that determine the total genetic merit index of Italian Duroc pigs.     

Influence of sex, slaughter weight and carcass weight on “non-carcass” and carcass quality in segureña lambs

The effects of sex, slaughter weight and carcass weight on carcass characteristics and meat quality traits were evaluated using 100 Segureña lambs. The management of all lambs was similar prior to slaughter at 19–25 kg. Slaughtered animals with a hot carcass weight below 20 kg were assigned to class B, and those greater than 22 kg to class C. Carcass weight had a significant influence on “non-carcass” components, dressing percentage, subjective carcass conformation, fat deposits, carcass fatness, bone and most carcass measurements. Sex had a significant effect on age at slaughter, “non-carcass” components, rib measurements, dressing percentage, fat deposits, and neck and shoulder percentage. As the weight increased, the carcass measurements also increased. Concurrently, while improving the conformation indices of the carcass, leg and dressing percentages, neither the commercial cuts of the animal nor tissue composition was significantly affected. Sex primarily affected the quantity of all types of fat deposits.     

A genome-wide association study identifies genomic loci associated with backfat thickness,carcass weight,and body weight in two commercial pig populations

Growth and fatness traits are economically important in the pig industry. To dissect the genetic architecture of these traits in commercial pigs, we conducted a genome-wide association study (GWAS) for carcass weight, backfat thickness, and body weight in two commercial populations: Duroc × (Landrace × Yorkshire) (DLY) and Duroc populations. To enhance the detection power, three GWAS approaches including single-trait GWAS, multi-trait GWAS and meta-analysis were used in this study. A total of 13 suggestive loci were identified on nine chromosomes. The most significant locus was detected at 272.05 Mb on SSC1, and it was associated with backfat thickness at the first rib in the DLY population. Three genes at the identified loci (TBC1D1, BAAT and PHLPP1) were highlighted as functionally plausible candidate genes for pig growth and fatness traits. Genome-wide significant locus was not evidenced in this study, indicating that large populations are required to identify QTL with minor effects on growth and fatness traits in commercial pig populations, in which intensively artificial selections have been imposed on these traits and small genetical variances usually retain in these traits.     

On growth, fatness, and form: A further look at porcine Chromosome 4 in an Iberian × Landrace cross

A crossed population between Iberian × Landrace pigs consisting of 321 F₂, 87 F₃, and 85 backcross individuals has been analyzed to refine the number and positions of quantitative trait loci (QTL) affecting shape, growth, fatness, and meat quality traits in SSC4. A multitrait multi-QTL approach has been used. Our results suggest that carcass length and shoulder weight are affected by two loci. The first one, close to the AFABP gene, has a very strong pleiotropic effect on fatness, whereas the second one, in the interval between S0073 and S0214, also affects live weight, although to a lesser extent. This latter QTL would correspond to the FAT1 locus described initially in pigs. It seems that SSC4’s loci play an important role in redistributing total weight, and the Landrace allele increases shoulder weight and carcass length much more than ham or total weight. Furthermore, there is also strong evidence of additional loci influencing pH and color in more distant, telomeric positions.     

A genome scan for loci affecting pork quality in a Duroc-Landrace F population

A genome scan was conducted on 370 F2 Duroc-Landrace pigs. Microsatellite markers (n = 182) were genotyped across the entire F2 population, all F1 parents and the paternal grandparents. Breed of origin of all chromosomal segments inherited in F2 progeny were predicted using GenoProb, where genotypic data, genetic maps and extended pedigrees were used as inputs. Statistical tests for quantitative trait loci (QTL) associations were conducted on 41 phenotypes with SAS using output from GenoProb for genotypic data. Fixed effects included sex and age at slaughter. For certain analyses carcass weight, RYR1 genotype and/or PRKAG3 genotype were also included as covariates. Subjective and objective measures of pork colour, marbling and tenderness were recorded, as well as measures of carcass fatness and muscularity. Test results were adjusted to a genome-wide level of significance. Five genomic regions presented significant evidence for QTL at chromosome 1 positions 6 cM (intramuscular fat) and 67 cM (Hunter L*), chromosome 2 position 62 cM (taste panel tenderness), chromosome 17 position 50 (loineye area and image analysis estimated loineye area) and X position 87 cM (carcass weight). Sixty-six suggestive associations were detected. Fourteen of these associations were within the regions with significant QTL on chromosomes 2, 17 and X, and the remaining 52 associations resided in 29 other regions on 13 different chromosomes of the porcine genome. The chromosome 2 region of 60-66 cM was associated with all measures of pork tenderness and the region on chromosome 17 (32-39 cM) was associated with both measures of intramuscular fat and loineye area. After verification, the QTL for marbling and tenderness should be useful in commercial production to improve pork quality as the population was developed from two of the three most utilized breeds of swine in the USA.     

Apportioning protein requirements for maintenance v. growth for blue-breasted quail (Excalfactoria chinensis) from 7 to 21 days of age

The aim of this study was to investigate protein requirements for the maintenance and growth of blue-breasted quail (Excalfactoria chinensis) from 7 to 21 days of age. A total of 180 quails, 7 days old, were randomly assigned to 36 cages and for 2 weeks were fed diets with a metabolisable energy concentration of 12.13 MJ/kg and a dietary CP concentration of 125, 150, 175, 200, 225 or 250 g/kg. The average BW per cage and the feed intake per cage were recorded daily. The results showed that quails fed 125 g/kg CP could not maintain their BW and had negative feed efficiency. There were linear and quadratic relationships between CP level and response criteria, including BW, weight gain, feed intake, feed efficiency, final body nitrogen mass and body nitrogen accretion (P<0.05). The dietary CP requirements, as calculated using a one-slope quadratic broken-line model, were 211 and 202 g/kg according to weight gain and feed efficiency, respectively. The regression equations, on the basis of metabolic BW, of daily weight gain on daily protein intake according to the model were Y=0.137-2.128(0.113-X) if X<0.113 and Y=0.137 if X>or=0.113 (R2=0.96, P<0.001), which meant that the protein requirement for maintenance was 0.049 times the metabolic BW and that to gain 1 g weight quails needed to ingest an extra 0.47 g protein after the maintenance requirement was satisfied. The regression equations, on the basis of metabolic BW, of daily body nitrogen accretion on daily protein intake according to the model were Y=5.667-76.700(0.119-X) if X<0.119 and Y=5.667 if X>or=0.119 (R2=0.95, P<0.001), which meant that quails had to receive an amount of protein equal to their metabolic BW multiplied by 0.045 to satisfy the requirement for maintenance and then ingest an extra 13 g protein to accrete 1 g body nitrogen. In conclusion, growth or protein accretion rates should be regulated according to dietary CP for specific experimental purposes via apportioning protein requirements for maintenance v. growth.     

Genome-wide identification of quantitative trait loci for carcass composition and meat quality in a large-scale White Duroc × Chinese Erhualian resource population

Carcass and meat quality traits are economically important in pigs. In this study, 17 carcass composition traits and 23 meat quality traits were recorded in 1028 F₂ animals from a White Duroc × Erhualian resource population. All pigs in this experimental population were genotyped for 194 informative markers covering the entire porcine genome. Seventy-seven genome-wide significant quantitative trait loci (QTL) for carcass traits and 68 for meat quality were mapped to 34 genomic regions. These results not only confirmed many previously reported QTL but also revealed novel regions associated with the measured traits. For carcass traits, the most prominent QTL was identified for carcass length and head weight at 57 cM on SSC7, which explained up to 50% of the phenotypic variance and had a 95% confidence interval of only 3 cM. Moreover, QTL for kidney and spleen weight and lengths of cervical vertebrae were reported for the first time in pigs. For meat quality traits, two significant QTL on SSC5 and X were identified for both intramuscular fat content and marbling score in the longissimus muscle, while three significant QTL on SSC1 and SSC9 were found exclusively for IMF. Both LM and the semimembranous muscle showed common QTL for colour score on SSC4, 5, 7, 8, 13 and X and discordant QTL on other chromosomes. White Duroc alleles at a majority of QTL detected were favourable for carcass composition, while favourable QTL alleles for meat quality originated from both White Duroc and Erhualian.     

QTL mapping for growth and carcass traits in an Iberian by Landrace pig intercross: additive,dominant and epistatic effects

Results from a QTL experiment on growth and carcass traits in an experimental F2 cross between Iberian and Landrace pigs are reported. Phenotypic data for growth, length of carcass and muscle mass, fat deposition and carcass composition traits from 321 individuals corresponding to 58 families were recorded. Animals were genotyped for 92 markers covering the 18 porcine autosomes (SSC). The results from the genomic scan show genomewide significant QTL in SSC2 (longissimus muscle area and backfat thickness), SSC4 (length of carcass, backfat thickness, loin, shoulder and belly bacon weights) and SSC6 (longissimus muscle area, backfat thickness, loin, shoulder and belly bacon weights). Suggestive QTL were also found on SSC1, SSC5, SSC7, SSC8, SSC9, SSC13, SCC14, SSC16 and SSC17. A bidimensional genomic scan every 10 cM was performed to detect interaction between QTL. The joint action of two suggestive QTL in SSC2 and SSC17 led to a genome-wide significant effect in live weight. The results of the bidimensional genomic scan showed that the genetic architecture was mainly additive or the experimental set-up did not have enough power to detect epistatic interactions.