Effects of dimer interface mutations in Hin recombinase on DNA binding and recombination

Previous biochemical assays and a structural model of the protein have indicated that the dimer interface of the Hin recombinase is composed of two alpha-helices. To elucidate the structure and function of the helix, amino acids at the N-terminal end of the helix, where the two helices make their most extensive contact, were randomized, and inversion-incompetent mutants were selected. To investigate why the mutants lost their inversion activities, the DNA binding, hix pairing, invertasome formation, and DNA cleavage activities were assayed using in vivo and in vitro methodologies. The results indicated that the mutants could be divided into four classes based on their DNA binding activity. We propose that the alpha-helices might serve to place a DNA binding motif of Hin in the correct spatial relationship to the minor groove of the recombination site. All the mutants except those that failed to bind DNA were able to perform hix pairing and invertasome formation, suggesting that the dimer interface is not involved in either of these processes. The inversion-incompetent phenotype of the binders was caused by the inability of mutants to perform DNA cleavage. The mutants that showed less binding ability than the wild type nevertheless exhibited a wild-type level of hix pairing activity, because the hix pairing activity overcomes the defect in DNA binding. This phenotype of the mutants that are impaired in DNA binding suggests that the binding domains of Hin may mediate Hin-Hin interaction during hix pairing.     

Sequence-specific interaction of the Salmonella Hin recombinase in both major and minor grooves of DNA.

The Hin recombinase of Salmonella catalyzes a site-specific recombination event which leads to flagellar phase variation. Starting with a fully symmetrical recombination site, hixC, a set of 40 recombination sites which vary by pairs of single base substitutions was constructed. This set was incorporated into the Salmonella-specific bacteriophage P22 based challenge phage selection and used to define the DNA sequence determinants for the binding of Hin to DNA in vivo. The critical sequence-specific contacts between a Hin monomer and a 13 bp hix half-site are at two T:A base pairs in the major groove of the DNA which are separated by one base pair, and two consecutive A:T contacts in the minor groove. The base substitutions in the major groove recognition portion which were defective in binding Hin still retained residual binding capability in vivo, while the base pair substitutions affecting the minor groove recognition region lost all in vivo binding. Using in vitro binding assays, Hin was found to bind to hix symmetrical sites with A:T base pairs or I:C base pairs in the minor groove recognition sequences, but not to G:C base pairs. In separate in vitro binding assays, Hin was equally defective in binding to either a G:C or a I:C contact in a major groove recognition sequence. Results from in vitro binding assays to hix sites in which 3-deazaadenine was substituted for adenine are consistent with Hin making a specific contact to either the N3 of adenine or O2 of thymine in the minor groove within the hix recombination site on each symmetric half-site. These results taken with the results of previous studies on the DNA binding domain of Hin suggest a sequence-specific minor groove DNA binding motif.     

The effects of symmetrical recombination site hixC on Hin recombinase function.

An artificial recombination site hixC composed of two identical half-sites that bind the Hin recombinase served as a better operator in vivo than the wild type site hixL (Hughes, K. T., Youderian, P., and Simon, M. I (1988) Genes & Dev. 2, 937-948). In vitro binding assays such as gel retardation assay and methylation protection assay demonstrated that Hin binds to hixC as tightly as it binds to hixL, even when the sites are located in negatively supercoiled plasmids. However, hixC served as a poor recombination site when it was subjected to the standard inversion assay in vitro. hixC showed a 16-fold slower inversion rate than the wild type. A series of biochemical assays designed to probe different stages of the Hin-mediated inversion reaction, demonstrated that Hin dimers bound to hixC have difficulty in forming paired hix site intermediates. KMnO4 and S1 nuclease assays detected an anomalous structure of the center of hixC only when the site was in negatively supercoiled plasmids. Mutational analysis in the central region of hixC and assays of paired hix site formation with topoisomers of the hixC substrate plasmid suggested that Hin is not able to pair hixC sites because of the presence of the anomalous structure in the center of the site. The structure does not behave like a DNA "cruciform" since Hin dimers still bind efficiently to the site. It is thought to consist of a short denatured "bubble" encompassing 2 base pairs. During the study of mutations in the center of hixC, it was found that Hin is not able to cleave DNA if a guanine residue is one of the two central nucleotides close to the cleavage site. Furthermore, Hin acts in a concerted fashion and cannot cleave any DNA strand if one of the four strands in the inversion intermediate is not cleavable.     

Hin recombinase mutants functionally disrupted in interactions with Fis

A previous genetic screen was designed to separate Hin recombinase mutants into distinct classes based on the stage in the recombination reaction at which they are blocked (O. Nanassy, Zoltan, and K. T. Hughes, Genetics 149:1649-1663, 1998). One class of DNA binding-proficient, recombination-deficient mutants was predicted by genetic classification to be defective in the step prior to invertasome formation. Based on the genetic criteria, mutants from this class were also inferred to be defective in interactions with Fis. In order to understand how the genetic classification relates to individual biochemical steps in the recombination reaction these mutants, R123Q, T124I, and A126T, were purified and characterized for DNA cleavage and recombination activities. Both the T124I and A126T mutants were partially active, whereas the R123Q mutant was inactive. The A126T mutant was not as defective for recombination as the T124I allele and could be partially rescued for recombination both in vivo and in vitro by increasing the concentration of Fis protein. Rescue of the A126T allele required the Fis protein to be DNA binding proficient. A model for a postsynaptic role for Fis in the inversion reaction is presented.     

Importance of minor-groove contacts for recognition of DNA by the binding domain of Hin recombinase

Incorporation of the DNA-cleaving moiety EDTA.Fe at discrete amino acid residues along a DNA-binding protein allows the positions of these residues relative to DNA bases, and hence the organization of the folded protein, to be mapped by high-resolution gel electrophoresis. A 52-residue protein, based on the sequence-specific DNA-binding domain of Hin recombinase (139-190), with EDTA at the NH2 terminus cleaves DNA at Hin recombination sites. The cleavage data for EDTA-Hin(139-190) reveal that the NH2 terminus of Hin(139-190) is bound in the minor groove of DNA near the symmetry axis of Hin-binding sites [Sluka, J. P., Horvath, S. J., Bruist, M. F., Simon, M. I., & Dervan, P. B. (1987) Science 238, 1129]. Six proteins, varying in length from 49 to 60 residues and corresponding to the DNA-binding domain of Hin recombinase, were synthesized by solid-phase methods: Hin(142-190), Hin(141-190), Hin(140-190), Hin(139-190), Hin(135-190), and Hin(131-190) were prepared with and without EDTA at the NH2 termini in order to test the relative importance of the residues Gly139-Arg140-Pro141-Arg142, located near the minor groove, for sequence-specific recognition at five imperfectly conserved 12-base-pair binding sites. Footprinting and affinity cleaving reveal that deletion of Gly139 results in a protein with affinity and specificity similar to those of Hin(139-190) but that deletion of Gly139-Arg140 affords a protein with altered affinities and sequence specificities for the five binding sites. It appears that Arg140 in the DNA-binding domain of Hin is important for recognition of the 5'-AAA-3' sequence in the minor groove of DNA. Our results indicate modular DNA and protein interactions with two adjacent DNA sites (major and minor grooves, respectively) bound on the same face of the helix by two separate parts of the protein.     

Intrasubunit and intersubunit interactions controlling assembly of active synaptic complexes during Hin-catalyzed DNA recombination

Serine recombinases, which generate double-strand breaks in DNA, must be carefully regulated to ensure that chemically active DNA complexes are assembled correctly. In the Hin-catalyzed site-specific DNA inversion reaction, two inversely oriented recombination sites on the same DNA molecule assemble into a synaptic complex that uniquely generates inversion products. The Fis-bound recombinational enhancer, together with topological constraints directed by DNA supercoiling, functions to regulate Hin synaptic complex formation and activity. We have isolated a collection of gain-of-function mutants in 22 positions within the catalytic and oligomerization domains of Hin using two genetic screens and by site-directed mutagenesis. One genetic screen measured recombination in the absence of Fis and the other assessed SOS induction as a readout of increased DNA cleavage. These mutations, together with molecular modeling, identify important sites of dynamic intrasubunit and intersubunit interactions that regulate assembly of the active tetrameric recombination complex. Of particular interest are interactions between the oligomerization helix (helix E) and the catalytic domain of the same subunit that function to hold the dimer in an inactive state in the absence of the Fis/enhancer system. Among these is a relay involving a triad of phenylalanines that are proposed to switch positions during the transition from dimers to the catalytically active tetramer. Novel Hin mutants that generate synaptic complexes that are blocked at steps prior to DNA cleavage are also described.     

DNA looping and the helical repeat in vitro and in vivo: effect of HU protein and enhancer location on Hin invertasome assembly.

Site-specific DNA inversion by the Hin recombinase requires the formation of a multicomponent nucleo-protein structure called an invertasome. In this structure, the two recombination sites bound by Hin are assembled together at the Fis-bound recombinational enhancer with the requisite looping of the intervening DNA segments. We have analyzed the role of the HU protein in invertasome assembly when the enhancer is located at variable positions close to one of the recombination sites. In the absence of HU in vitro and in hupA hupB mutant cells in vivo, invertasome assembly is very inefficient when there is < 104 bp of DNA between the enhancer and recombination site. Invertasome assembly in the presence of HU in vitro or in vivo displayed a periodicity beginning with 60 bp of intervening DNA that reflected its helical repeat. The average helical repeat for this DNA region was calculated by autocorrelation and Fourier transformation to be 11.2 bp per turn for supercoiled DNA both in the presence of HU in vitro and in hup+ cells in vivo. HU is the only protein in Escherichia coli that can promote invertasome formation with short DNA lengths between the enhancer and recombination sites. However, the presence of certain polyamines and a protein activity present in HeLa nuclear extracts can efficiently substitute for HU in invertasome assembly. These data support a model in which HU binds non-specifically to the DNA between the enhancer and recombination site to facilitate DNA looping.     

Sequence-specific oxidative cleavage of DNA by a designed metalloprotein, Ni(II).GGH(Hin139-190).

A 55-residue protein containing the DNA binding domain of Hin recombinase, residues 139-190, with the tripeptide Gly-Gly-His (GGH) at the NH2 terminus was synthesized by stepwise solid-phase methods. GGH(Hin139-190) binds sequence specifically to DNA at four 13 base pair sites (termed hixL and secondary) and, in the presence of Ni(OAc)2 and monoperoxyphthalic acid, reacts predominantly at a single deoxyribose position on one strand of each binding site [Mack, D.P., & Dervan, P.B. (1990) J. Am. Chem. Soc. 112, 4604]. We find that, upon treatment with n-butylamine, the DNA termini at the cleavage site are 3'- and 5'-phosphate, consistent with oxidative degradation of the deoxyribose backbone. The nickel-mediated oxidation can be activated with peracid, iodosylbenzene, or hydrogen peroxide. The sequence specificity of the reaction is not dependent on oxidant, but the rates of cleavage differ, decreasing in the order peracid greater than iodosylbenzene greater than hydrogen peroxide. Optimal cleavage conditions for a 1 microM concentration of protein are 50 microM peracid, pH 8.0, and 1 equiv of Ni(OAc)2. The preferential cleavage at a single base pair position on one strand of the minor groove indicates a nondiffusible oxidizing species. A change of absolute configuration in the GGH metal binding domain from L-His to D-His [Ni(II).GG-(-D-)H(Hin139-190)] affords cleavage at similar base pair locations but opposite with regard to strand specificity.     

Orientation of the putative recognition helix in the DNA-binding domain of Hin recombinase complexed with the hix site

On the basis of sequence similarity with other known DNA-binding proteins, the DNA-binding domain of Hin recombinase, residues 139-190, is thought to bind DNA by a helix-turn-helix motif. Two models can be considered that differ in the orientation of the recognition helix in the major groove of DNA. One is based on the orientation of the recognition helix found in the 434 repressor (1-69) and lambda repressor-DNA cocrystals, and the other is based on the NMR studies of lac repressor headpiece. Cleavage by EDTA.Fe attached to a lysine side chain (Ser183----Lys183) near the COOH terminus of Hin(139-184) reveals that the putative recognition helix is oriented toward the center of the inverted repeats in a manner similar to that seen in the 434 and lambda repressor-DNA cocrystals.     

Regulation of site-specific recombination by the C-terminus of lambda integrase

Site-specific recombination catalyzed by bacteriophage λ integrase (Int) is essential for establishment and termination of the viral lysogenic life cycle. Int is the archetype of the tyrosine recombinase family whose members are responsible for DNA rearrangement in prokaryotes, eukaryotes and viruses. The mechanism regulating catalytic activity during recombination is incompletely understood. Studies of tyrosine recombinases bound to their target substrates suggest that the C-termini of the proteins are involved in protein–protein contacts that control the timing of DNA cleavage events during recombination. We investigated an Int truncation mutant (W350) that possesses enhanced topoisomerase activity but greater than 100-fold reduced recombination activity. Alanine scanning mutagenesis of the C-terminus indicates that two mutants, W350A and I353A, cannot perform site-specific recombination although their DNA binding, cleavage and ligation activities are at wild-type levels. Two other mutants, R346A and R348A, are deficient solely in the ability to cleave DNA. To explain these results, we have constructed a homology-threaded model of the Int structure using a Cre crystal structure. We propose that residues R346 and R348 are involved in orientation of the catalytic tyrosine that cleaves DNA, whereas W350 and I353 control and make intermolecular contacts with other Int proteins in the higher order recombination structures known as intasomes. These results suggest that Int and the other tyrosine recombinases have evolved regulatory contacts that coordinate site-specific recombination at the C-terminus.     

Host protein requirements for in vitro site-specific DNA inversion

Flagellar phase variation is mediated by a recombination event that occurs at specific sites leading to inversion of a chromosomal segment of DNA. The presence of a 60 bp recombinational enhancer sequence on the DNA substrate molecule results in a 150-fold stimulation in the initial rate of inversion. The protein components required for inversion have been purified. They include the 21,000 dalton recombinase (Hin), a 12,000 dalton host protein (Factor II), and one of the major histone-like proteins of E. coli HU. The dependence of the initial rate of recombination on HU varies with respect to the location of the recombinational enhancer. The role of HU, Factor II, and the enhancer in facilitating site-specific recombination is discussed.     

Testing water-mediated DNA recognition by the Hin recombinase

The Hin recombinase specifically recognizes its DNA-binding site by means of both major and minor groove interactions. A previous X-ray structure, together with new structures of the Hin DNA-binding domain bound to a recombination half-site that were solved as part of the present study, have revealed that two ordered water molecules are present within the major groove interface. In this report, we test the importance of these waters directly by X-ray crystal structure analysis of complexes with four mutant DNA sequences. These structures, combined with their Hin-binding properties, provide strong support for the critical importance of one of the intermediate waters. A lesser but demonstrable role is ascribed to the second water molecule. The mutant structures also illustrate the prominent roles of thymine methyls both in stabilizing intermediate waters and in interfering with water or amino acid side chain interactions with DNA.     

Mutations at residues 282, 286, and 293 of phage lambda integrase exert pathway-specific effects on synapsis and catalysis in recombination

Bacteriophage lambda integrase (Int) catalyzes site-specific recombination between pairs of attachment (att) sites. The att sites contain weak Int-binding sites called core-type sites that are separated by a 7-bp overlap region, where cleavage and strand exchange occur. We have characterized a number of mutant Int proteins with substitutions at positions S282 (S282A, S282F, and S282T), S286 (S286A, S286L, and S286T), and R293 (R293E, R293K, and R293Q). We investigated the core- and arm-binding properties and cooperativity of the mutant proteins, their ability to catalyze cleavage, and their ability to form and resolve Holliday junctions. Our kinetic analyses have identified synapsis as the rate-limiting step in excisive recombination. The IntS282 and IntS286 mutants show defects in synapsis in the bent-L and excisive pathways, respectively, while the IntR293 mutants exhibit synapsis defects in both the excision and bent-L pathways. The results of our study support earlier findings that the catalytic domain also serves a role in binding to core-type sites, that the core contacts made by this domain are important for both synapsis and catalysis, and that Int contacts core-type sites differently among the four recombination pathways. We speculate that these residues are important for the proper positioning of the catalytic residues involved in the recombination reaction and that their positions differ in the distinct nucleoprotein architectures formed during each pathway. Finally, we found that not all catalytic events in excision follow synapsis: the attL site probably undergoes several rounds of cleavage and ligation before it synapses and exchanges DNA with attR.     

The catalytic residues of Tn3 resolvase

To characterize the residues that participate in the catalysis of DNA cleavage and rejoining by the site-specific recombinase Tn3 resolvase, we mutated conserved polar or charged residues in the catalytic domain of an activated resolvase variant. We analysed the effects of mutations at 14 residues on proficiency in binding to the recombination site (‘site I’), formation of a synaptic complex between two site Is, DNA cleavage and recombination. Mutations of Y6, R8, S10, D36, R68 and R71 resulted in greatly reduced cleavage and recombination activity, suggesting crucial roles of these six residues in catalysis, whereas mutations of the other residues had less dramatic effects. No mutations strongly inhibited binding of resolvase to site I, but several caused conspicuous changes in the yield or stability of the synapse of two site Is observed by non-denaturing gel electrophoresis. The involvement of some residues in both synapsis and catalysis suggests that they contribute to a regulatory mechanism, in which engagement of catalytic residues with the substrate is coupled to correct assembly of the synapse.     

Stepwise dissection of the Hin-catalyzed recombination reaction from synapsis to resolution

The Hin DNA invertase promotes a site-specific DNA recombination reaction in the Salmonella chromosome. The native Hin reaction exhibits overwhelming selectivity for promoting inversions between appropriately oriented recombination sites and requires the Fis regulatory protein, a recombinational enhancer, and a supercoiled DNA substrate. Here, we report a robust recombination reaction employing oligonucleotide substrates and a hyperactive mutant form of Hin. Synaptic complex intermediates purified by gel electrophoresis were found to contain four Hin protomers bound to two recombination sites. Each Hin protomer is associated covalently with a cleaved DNA end. The cleaved complexes can be ligated into both parental and recombinant orientations at equivalent frequencies, provided the core residues can base-pair, and are readily disassembled into separated DNA fragments bound by Hin dimers. Kinetic analyses reveal that synapsis occurs rapidly, followed by comparatively slow Hin-catalyzed DNA cleavage. Subsequent steps of the reaction, including DNA exchange and ligation, are fast. Thus, post-synaptic step(s) required for DNA cleavage limit the overall rate of the recombination reaction.     

The effects of ethidium bromide and Mg++ ion on strand exchange in the Hin-mediated inversion reaction

The biochemical reaction of a site-specific recombinase such as Hin invertase or gammadelta resolvase starts with binding of the recombinase to its recombination site and cleavage of the DNA in the center of the site. This is followed by strand exchange and finally ligation of the ends of the recombined strands. Previous biochemical studies have shown that Hin invertase and gammadelta resolvase cannot proceed beyond DNA cleavage in the absence of Mg++ ion, indicating that these recombinases require Mg++ ion in the strand exchange process. We have observed that the intercalating agent, ethidium bromide (2 microM), does not interfere with DNA cleavage, but slows strand exchange in a concentration-dependent manner. Levels of Mg++ ion below 5 mM also slow strand exchange substantially. We infer that random intercalation of ethidium bromide inhibits unwinding of the double helix at the recombination site in the negatively supercoiled DNA and propose that Mg+ may be required for Hin to deform the secondary structure of B-DNA prior to strand exchange.     

A DNA-binding domain swap converts the invertase gin into a resolvase

DNA resolvases and invertases are closely related, yet catalyze recombination within two distinct nucleoprotein structures termed synaptosomes and invertasomes, respectively. Different protein-protein and protein-DNA interactions guide the assembly of each type of recombinogenic complex, as well as the subsequent activation of DNA strand exchange. Here we show that invertase Gin catalyzes factor for inversion stimulation dependent inversion on isolated copies of sites I from ISXc5 res, which is typically utilized by the corresponding resolvase. The concomitant binding of Gin to sites I and III in res, however, inhibits recombination. A chimeric recombinase, composed of the catalytic domain of Gin and the DNA-binding domain of ISXc5 resolvase, recombines two res with high efficiency. Gin must therefore contain residues proficient for both synaptosome formation and activation of strand exchange. Surprisingly, this chimera is unable to assemble a productive invertasome; a result which implies a role for the C-terminal domain in invertasome formation that goes beyond DNA binding.     

Sequence-specific and non-specific binding of the Rci protein to the asymmetric recombination sites of the R64 shufflon

Specific cleavages within the shufflon-specific recombination site of plasmid R64 were detected by primer extension when a DNA fragment carrying the recombination site was incubated with the shufflon-specific Rci recombinase. Rci-dependent cleavages occurred in the form of a 5' protruding 7 bp staggered cut, suggesting that DNA cleavage and rejoining in the shufflon system take place at these positions. As a result, shufflon crossover sites were designated as sfx sequences consisting of a central 7 bp spacer sequence, and left and right 12 bp arms. R64 sfx sequences are unique among various site-specific recombination sites, since only the spacer sequence and the right arm sequence are conserved among various R64 sfxs, whereas the left arm sequence is not conserved and is not related to the right arm sequence. From nuclease protection analyses, Rci protein was shown to bind to entire R64 and artificial sfx sequences, suggesting that one Rci molecule binds to the conserved sfx right arm in a sequence-specific manner and the second to the sfx left arm in a non-specific manner. The sfx left arm sequences as well as the right arm sequences were shown to determine affinity to Rci and subsequently inversion frequency. Asymmetry of the sfx sequence may be the reason why Rci protein acts only on the inverted sfx sequences.     

Active-site assembly and mode of DNA cleavage by Flp recombinase during full-site recombination.

A combination of half-site substrates and step arrest mutants of Flp, a site-specific recombinase of the integrase family, had earlier revealed the following features of the half-site recombination reaction. (i) The Flp active site is assembled by sharing of catalytic residues from at least two monomers of the protein. (ii) A Flp monomer does not cleave the half site to which it is bound (DNA cleavage in cis); rather, it cleaves a half site bound by a second Flp monomer (DNA cleavage in trans). For the lambda integrase (Int protein), the prototype member of the Int family, catalytic complementation between two active-site mutants has been observed in reactions with a suicide attL substrate. By analogy with Flp, this observation is strongly suggestive of a shared active site and of trans DNA cleavage. However, reactions with linear suicide attB substrates and synthetic Holliday junctions are more compatible with cis than with trans DNA cleavage. These Int results either argue against a common mode of active-site assembly within the Int family or challenge the validity of Flp half sites as mimics of the normal full-site substrates. We devised a strategy to assay catalytic complementation between Flp monomers in full sites. We found that the full-site reaction follows the shared active-site paradigm and the trans mode of DNA cleavage. These results suggest that within the Int family, a unitary chemical mechanism of recombination is achieved by more than one mode of physical interaction among the recombinase monomers.     

Characterization of the integrase of NBU1, a Bacteroides mobilizable transposon

NBU1 is a Bacteroides mobilizable transposon (MTn) that is integrated within the host chromosome and requires CTnDOT functions for its excision and transfer into a new host. The NBU1 integrase IntN1 has been classified as a tyrosine recombinase based on the presence of conserved residues. We created alanine mutants of the residues R291, K314, H393, R396, H419 and the conserved substitution Y429F and tested them for integration efficiency. The results suggest that these residues in IntN1 are important for integration, and Y429 could be the catalytic nucleophile. We employed suicide substrates and partially purified IntN1 to determine the positions of IntN1 cleavage within the 14 bp common core region that is identical in both NBU1 att sites. We show that IntN1 makes 7 bp staggered cuts on the top and bottom strands. From previous mutational analysis of the att sites, we show that two specific mutations near the site of bottom strand cleavage within this 7 bp region increased integration, and mutations of the two bases near top strand cleavage site had no effect on integration. These results indicate that IntN1 lacks the strict requirement for homology between the recombining sites seen with other tyrosine recombinases. We also show that phosphorothioate substitutions at the cleavage site and 1 bp downstream inhibited cleavage by IntN1. This differs from other studied tyrosine recombinases where inhibition occurs by substitutions at the cleavage site only.