共查询到20条相似文献,搜索用时 93 毫秒
1.
Directly labeled fluorescent DNA probes have been made by nick translation and PCR using dUTP attached to the fluorescent label, Cy3, with different length linkers. With preparation of probes by PCR we find that linker length affects the efficiency of incorporation of Cy3-dUTP, the yield of labeled probe, and the signal intensity of labeled probes hybridized to chromosome target sequences. For nick translation and PCR, both the level of incorporation and the hybridization fluorescence signal increased in parallel when the length of the linker arm is increased. Under optimal conditions, PCR yielded more densely labeled probes, however, the yield of PCR labeled probe decreased with greater linear density of labeling. By using a Cy3-modified dUTP with the longest linker under optimal conditions it was possible to label up to 28% of the possible substitution sites on the target DNA with reasonable yield by PCR and 18% by nick translation. A mechanism involving steric interactions between the polymerase, cyanine-labeled sites on template and extending chains and the modified dUTP substrate is proposed to explain the inverse correlation between the labeling efficiency and the yield of DNA probe synthesis by PCR. 相似文献
2.
An in vivo 5'-bromodeoxyuridine (BrdUrd) labeled DNA probe was used for in situ DNA-RNA hybridization. BrdUrd was incorporated into plasmid DNA by inoculating E. coli with Luria-Bertani (LB) culture medium containing 500 mg/L of BrdUrd. After purification of the plasmid DNA, specific probes of the defined DNA fragments, which contained the cloned insert and short stretches of the vector DNA, were generated by restriction endonuclease. The enzymatic digestion pattern of the BrdUrd-labeled plasmid DNA was the same as that of the non-labeled one. BrdUrd was incorporated in 15%-20% of the total DNA, that is, about 80% of the thymidine was replaced by BrdUrd. Picogram amounts of the BrdUrd-labeled DNA probe itself and the target DNA were detectable on nitrocellulose filters in dot-blot spot and hybridization experiments using a peroxidase/diaminobenzidine combination. The BrdUrd-labeled DNA probe was efficiently hybridized with both single stranded DNA on nitrocellulose filters and cellular mRNA in in situ hybridization experiments. Through the reaction with BrdUrd in single stranded tails, hybridized probes were clearly detectable with fluorescent microscopy using a FITC-conjugated monoclonal anti-BrdUrd antibody. The in vivo labeling method did not require nick translation steps or in vitro DNA polymerase reactions. Sensitive, stable and efficient DNA probes were easily obtainable with this method. 相似文献
3.
The efficiency of fluorescence DNA labeling was estimated for four fluorescent 2′-deoxyuridine 5′-triphosphate derivatives differing in the orientation of the main dye axis, which passes through the polymethine chain, relative to the linker connecting the dye to the nucleotide. To estimate the polymerase chain reaction (PCR) rate, real-time PCR was run with two commercial hot-start DNA polymerases possessing 5′→3′ exonuclease activity in the presence of an intercalating dye. The efficiency of the test compound incorporation in the PCR product was estimated via a quantitative analysis of the amplification product by agarose gel electrophoresis. The fluorescently labeled product was then hybridized on a biological microchip and the ratio of signals from perfect match and mismatch duplexes was determined. The incorporation efficiency and discrimination between perfect match and mismatch duplexes were found to depend on the relative orientation of the dye and the linker between the dye and pyrimidine base, as well as on the presence of hydrophilic groups in the dye. Compounds that are efficiently incorporated in a growing DNA strand and show a high specificity in hybridization analysis were identified using biochips. 相似文献
4.
Several procedures have been described for fluorescent labeling of DNA and RNA. They are based on the introduction of aldehyde groups by partial depurination of DNA or oxidation of the 3'-terminal ribonucleoside in RNA by sodium periodate. Fluorescent labels with an attached hydrazine group are efficiently coupled with the aldehyde groups and the hydrazone bonds are stabilized by reduction with sodium cyanoborohydride. Alternatively, DNA can be quantitatively split at the depurinated sites with ethylenediamine. The aldimine bond between the aldehyde group in depurinated DNA or oxidized RNA and ethylenediamine is stabilized by reduction with sodium cyanoborohydride and the primary amine group introduced at these sites is used for attachment of isothiocyanate or succinimide derivatives of fluorescent dyes. The fluorescent DNA labeling can be carried out either in solution or on a reverse phase column. These procedures provide simple, inexpensive methods of multiple DNA labeling and of introducing one fluorescent dye molecule per RNA, as well as quantitative DNA fragmentation and incorporation of one label per fragment. These methods of fluorophore attachment were shown to be efficient for use in the hybridization of labeled RNA, DNA and DNA fragments with oligonucleotide microchips. 相似文献
5.
Nonradioactive in situ hybridization techniques are becoming increasingly important tools for rapid analysis of the topological organization of DNA and RNA sequences within cells. Prerequisite for further advances with these techniques are multiple labeling and detection systems for different probes. Here we summarize our results with a recently developed labeling and detection system. The DNA probe for in situ hybridization is modified with digoxigenin-labeled deoxyuridine-triphosphate. Digoxigenin is linked to dUTP via an 11-atom linear spacer (Dig-[11]-dUTP). Labeled DNA probes were hybridized in situ to chromosome preparations. The hybridization signal was detected using digoxigenin-specific antibodies covalently coupled to enzyme markers (alkaline phosphatase or peroxidase) or to fluorescent dyes. Color reactions catalyzed by the enzymes resulted in precipitates located on the chromosomes at the site of probe hybridization. This was verified by hybridizing DNA probes of known chromosomal origin. The signals were analyzed by bright field, reflection contrast and fluorescence microscopy. The results indicate that the new technique gives strong signals and can also be used in combination with other systems (e.g., biotin) to detect differently labeled DNA probes on the same metaphase plate. 相似文献
6.
Summary An in vivo 5-bromodeoxyuridine (BrdUrd) labeled DNA probe was used for in situ DNA-RNA hybridization. BrdUrd was incorporated into plasmid DNA by inoculating E. coli with Luria-Bertani (LB) culture medium containing 500 mg/L of BrdUrd. After purification of the plasmid DNA, specific probes of the defined DNA fragments, which contained the cloned insert and short stretches of the vector DNA, were generated by restriction endonuclease. The enzymatic digestion pattern of the BrdUrd-labeled plasmid DNA was the same as that of the non-labeled one. BrdUrd was incorporated in 15%–20% of the total DNA, that is, about 80% of the thymidine was replaced by BrdUrd. Picogram amounts of the BrdUrd-labeled DNA probe itself and the target DNA were detectable on nitrocellulose filters in dot-blot spot and hybridization experiments using a peroxidase/diaminobenzidine combination. The BrdUrd-labeled DNA probe was efficiently hybridized with both single stranded DNA on nitrocellulose filters and cellular mRNA in in situ hybridization experiments. Through the reaction with BrdUrd in single stranded tails, hybridized probes were clearly detectable with fluorescent microscopy using a FITC-conjugated monoclonal anti-BrdUrd antibody. The in vivo labeling method did not require nick translation steps or in vitro DNA polymerase reactions. Sensitive, stable and efficient DNA probes were easily obtainable with this method. 相似文献
7.
The efficiency of DNA labeling was assessed for 2'-deoxyuridine 5'-triphosphate (dUTP) derivatives containing the Cy7 cyanine dye as a fluorophore. Two fluorescent Cy7-labeled dUTP analogs differed in the chemical structure of the linker between the fluorophore and nucleotide moieties. The efficiency of the polymerase chain reaction (PCR) and inhibition with modified nucleotides were estimated by real-time PCR. The efficiency of labeled nucleotide incorporation in PCR products was measured by quantitative electrophoresis. The efficiency of target DNA labeling was evaluated by binding the fluorescently labeled PCR products to a microarray of oligonucleotide probes immobilized in hydrogel drops (a biochip). The near-infrared hybridization signal was detected by digital luminescence microscopy. An increase in linker length was found to provide more efficient incorporation of the labeled nucleotide. Both of the compounds provided high sensitivity and high specificity of DNA testing via allele-specific hybridization on a biochip. 相似文献
8.
Academic researchers are increasingly producing and using cDNA microarrays. Their quality and hybridization specificity are crucial in determining whether the generated data are accurate and interpretable. Here, we describe two methods of monitoring microarray production, the sustainability of DNA attachment, and the specificity of hybridization. The first method consists of labeling an oligonucleotide, which is one of the primers used to amplify all cDNA probes on the array (except for beta-actin and GAPDH) with fluorescent dye and hybridize it to the cDNA microarray. Attachment of the cDNAs on the array after the hybridization procedure was monitored by visualizing fluorescent signals from the spots on the array. In the second method, two selected DNA targets, beta-actin and GAPDH, were labeled with fluorescent dye to hybridize to the cDNA array. Hence, hybridization specificity was demonstrated by obtaining fluorescent signals solely from the genes corresponding to the target. 相似文献
9.
目的:建立一种质量控制芯片来监测样品标记、杂交和检测过程中的失误。方法:针对GFP基因设计的4条60mer寡核苷酸探针和1条阳性对照探针polv(U)与流感寡核苷酸探针一起打印在DAKO玻片上,并构建了GFP基因的克隆载体和体外表达载体,将从这两种重组载体上获得的绿色荧光蛋白(Green Fluorescent Protein,GFP)基因的ILNA、DNA片段和人的全血样品中的DNA用限制性显示技术(Restriction Display technology,RD)扩增标记,将标记的样品和荧光标记的通用引物U分别与芯片杂交、检测,并对扫描的结果进行统计分析。结果:GFP探针与相应的样品杂交时出现阳性信号,阳性对照探针在所有的杂交中均出现阳性信号,而空白对照则未检测荧光信号。结论:建立的质控芯片具有较好的敏感性和特异性,可以用于基因芯片中的质量监控。 相似文献
10.
An array of nano-channels was fabricated from silicon based semiconductor materials to stretch long, native dsDNA. Here we present a labeling scheme in which it is possible to identify the location of specific sequences along the stretched DNA molecules. The scheme proceeds by first using the strand displacement activity of the Vent (exo-) polymerase to generate single strand flaps on nicked dsDNA. These single strand flaps are hybridized with sequence specific fluorophore-labeled probes. Subsequent imaging of the DNA molecules inside a nano-channel array device allows for quantitative identification of the location of probes. The highly efficient DNA hybridization on the ss-DNA flaps is an excellent method to identify the sequence motifs of dsDNA as it gives us unique ability to control the length of the probe sequence and thus the frequency of hybridization sites on the DNA. We have also shown that this technique can be extended to a multi color labeling scheme by using different dye labeled probes or by combining with a DNA- polymerase-mediated incorporation of fluorophore-labeled nucleotides on nicking sites. Thus this labeling chemistry in conjunction with the nano-channel platform can be a powerful tool to solve complex structural variations in DNA which is of importance for both research and clinical diagnostics of genetic diseases. 相似文献
11.
BACKGROUND: Complex mixtures of DNA may be found in environmental and medical samples. There is a need for techniques that can measure low concentrations of target DNAs. For a multiplexed, flow cytometric assay, we show that the signal-to-noise ratio for fluorescence detection may be increased with the use of 3DNA dendrimers. A single fluorescent DNA molecule per bead could be detected with conventional flow cytometry instrumentation. METHODS: The analyte consisted of single-stranded (ss) DNA amplicons that were hybridized to capture probes on the surface of fluorescent polystyrene microspheres (beads) and initially labeled with streptavidin-R-phycoerythrin (single-step labeling). These beads have a low reporter fluorescence background and high efficiency of DNA hybridization. The DNA/SA-RPE complex was then labeled with 3DNA dendrimers and SA-RPE. The bead complexes were detected with a Luminex 100 flow cytometer. Bead standards were developed to convert the intensity to the number of SA-RPE labels per bead and the number of dendrimers per bead. RESULTS: The dendrimer assay resulted in 10-fold fluorescence amplification compared with single-step SA-RPE labeling. Based on concentration curves of pure target ss-amplicons, the signal-to-noise ratio of the dendrimer assay was greater by a factor of 8.5 over single-step SA-RPE labeling. The dendrimer assay was tested on 16S ribosomal DNA amplified from filter retentates of contaminated groundwater. Multiplexed detection of a single dendrimer-labeled DNA molecule per bead was demonstrated. CONCLUSIONS: Multiplexed detection of DNA hybridization on a single molecule level per bead was achieved with conventional flow cytometry instrumentation. This assay is useful for detecting target DNAs at low concentrations. 相似文献
12.
Nonradioactive in situ hybridization has found widespread applications in cytogenetics. Basic requirements are DNA probes in sufficient amounts and of high specificity as well as a labeling protocol of good reproducibility. The PCR has been of fundamental importance for the amplification of DNA sequences and thus for the production of DNA probes. Meanwhile, PCR protocols for amplification of DNA have reached a high degree of automation. So far, incorporation of labeled nucleotides into these DNA probes has normally been done by nick translation. Here we show that in using the PCR, amplification of a DNA probe larger than one kilobase accompanied by simultaneous incorporation of digoxigenin-11-dUTP can be performed for in situ hybridization experiments. As an example, the DNA probe pUC 1.77 specific for the subcentromeric region q12 of chromosome number 1 was used and hybridized against metaphase chromosomes from human lymphocytes. The labeled chromosome region was detected by anti-digoxigenin-fluorescein, Fab fragments. The experiments were evaluated by digital image analysis of microphotographs. 相似文献
13.
Background Targeting Induced Local Lesions in Genomes (TILLING) is a high throughput reverse genetics tool which detects mismatches (single point mutations or small indels) in large number of individuals of mutagenized populations. Currently, TILLING is intensively used for genomics assisted molecular breeding of several crop plants for desired traits. Most commonly used platform for mutation detection is Li-COR DNA Analyzer, where PCR amplified products treated with single strand mismatch specific nuclease are resolved on denaturing gels. The molecular size of any cut product can be easily estimated by comparing with IR dye labeled markers of known sizes. Similar fluorescent dye labeled size markers are also used for several genotyping experiments. Currently, commercially available size standards are expensive and are restricted up to only 700 bp which renders estimation of products of sizes greater than 700 bases inaccurate. Findings A simple protocol was developed for labeling 5' end of multiple DNA size markers with fluorescent dyes. This method involves cloning a pool of different size markers of DNA in a plasmid vector. PCR amplification of plasmid using IR dye labeled universal primers generates 5' fluorescent labeled products of various sizes. The size of products constituting the ladder can be customized as per the need. The generated size markers can be used without any further purification and were found to be stable up to one year at -20°C. Conclusions A simple method was developed for generating fluorescent dye labeled size standards. This method can be customized to generate different size standards as per experimental needs. The protocol described can also be adapted for developing labeled size standards for detection on platforms other than Li-COR i.e. other than infra red range of the spectrum. 相似文献
14.
A series of dATP and dCTP nucleotide analogs have been synthesized which are modified by attachment of aliphatic linkers containing a functional group to the amino-nitrogen at the hydrogen bonding positions of the bases, that is, at the 6-position of adenine and the 4-position of cytosine. These nucleotides are incorporated into DNA probes by standard nick-translation protocols. DNA probes labeled with biotin derivatives of these nucleotides are effectively hybridized to target DNA sequences and can be detected by a streptavidin and calf intestinal alkaline phosphatase conjugate with a sensitivity (0.25 pg DNA) sufficient for reproducible and rapid detection of single copy genes in a Southern blot of mammalian DNA. Also, a procedure has been developed to allow reprobing of nylon filters that have been hybridized with biotinylated probes and developed with the streptavidin/alkaline phosphatase conjugate and a standard dye system. 相似文献
15.
Fluorescence in situ hybridization (FISH) has become and indispensable tool in a variety of areas of research and clinical diagnostics. Many applications demand an approach for simultaneous detection of multiple target sequences that is rapid and simple, yet sensitive. In this work, we describe the synthesis of two new cyanine dye-labeled dUTP analogs, Cy3-dUTP and Cy5-dUTP. They are efficient substrates for DNA polymerases and can be incorporated into DNA probes by standard nick translation, random priming and polymerase chain reactions. Optimal labeling conditions have been identified which yield probes with 20-40 dyes per kilobase. The directly labeled DNA probes obtained with these analogs offer a simple approach for multicolor multisequence analysis that requires no secondary detection reagents and steps. 相似文献
17.
We developed a simple and rapid technique to synthesize single-stranded DNA (ssDNA) probes for fluorescent in situ hybridization (ISH) to human immunodeficiency virus 1 (HIV-1) RNA. The target HIV-1 regions were amplified by the polymerase chain reaction (PCR) and were simultaneously labeled with dUTP. This product served as template for an optimized asymmetric PCR (one-primer PCR) that incorporated digoxigenin (dig)-labeled dUTP. The input DNA was subsequently digested by uracil DNA glycosylase, leaving intact, single-stranded, digoxigenin-labeled DNA probe. A cocktail of ssDNA probes representing 55% of the HIV-1 genome was hybridized to HIV-1-infected 8E5 T-cells and uninfected H9 T-cells. For comparison, parallel hybridizations were done with a plasmid-derived RNA probe mix covering 85% of the genome and a PCR-derived RNA probe mix covering 63% of the genome. All three probe types produced bright signals, but the best signal-to-noise ratios and the highest sensitivities were obtained with the ssDNA probe. In addition, the ssDNA probe syntheses generated large amounts of probe (0.5 to 1 microg ssDNA probe per synthesis) and were easier to perform than the RNA probe syntheses. These results suggest that ssDNA probes may be preferable to RNA probes for fluorescent ISH. (J Histochem Cytochem 48:285-293, 2000) 相似文献
18.
A new method for the detection of PNA/DNA hybrids is presented. In this method, short PNA probes (9-13 mer) are labeled with a fluorescent dye and allowed to hybridize to target DNA molecules. A cationic polyamino acid, such as polylysine, is then added to the reaction mixture, whereupon the DNA molecules bind electrostatically to this polycation. The PNA probes, which are uncharged or may carry only a small charge due to the fluorescent dye, do not bind to polylysine unless hybridized to the negatively charged DNA target. The binding of the labeled PNA/DNA hybrid to the high-molecular-weight polymer leads to a significant change in the rotational correlation time of the fluorophore attached to the PNA. This can be conveniently detected by measuring the fluorescence polarization of the latter. The method is completely homogeneous because no separation of free from bound PNA probe is required. The hybridization and dehybridization reactions can be followed in real time. The method has been applied to the typing of single-nucleotide polymorphisms in PCR products. 相似文献
19.
AbstractNucleic acid hybridization with a labeled probe is the only practical way to detect a complementary target sequence in a complex nucleic acid mixture. The first section of this article covers quantitative aspects of nucleic acid hybridization thermodynamics and kinetics. The probes considered are oligonucleotides or polynucleotides, DNA or RNA, single- or double-stranded, and natural or modified, either in the nucleotide bases or in the backbone. The hybridization products are duplexes or triplexes formed with targets in solution or on solid supports. Additional topics include hybridization acceleration and reactions involving branch migration. The second section deals with synthesis or biosynthesis and detection of labeled probes, with a discussion of their sensitivity and specificity limits. Direct labeling is illustrated with radioactive probes. The discussion of indirect labels begins with biotinylated probes as prototypes. Reporter groups considered include radioactive, fluorescent, and chemiluminescent nucleotides, as well as enzymes with colorimetric, fluorescent, and luminescent substrates. 相似文献
20.
Nucleic acid hybridization with a labeled probe is the only practical way to detect a complementary target sequence in a complex nucleic acid mixture. The first section of this article covers quantitative aspects of nucleic acid hybridization thermodynamics and kinetics. The probes considered are oligonucleotides or polynucleotides, DNA or RNA, single- or double-stranded, and natural or modified, either in the nucleotide bases or in the backbone. The hybridization products are duplexes or triplexes formed with targets in solution or on solid supports. Additional topics include hybridization acceleration and reactions involving branch migration. The second section deals with synthesis or biosynthesis and detection of labeled probes, with a discussion of their sensitivity and specificity limits. Direct labeling is illustrated with radioactive probes. The discussion of indirect labels begins with biotinylated probes as prototypes. Reporter groups considered include radioactive, fluorescent, and chemiluminescent nucleotides, as well as enzymes with colorimetric, fluorescent, and luminescent substrates. 相似文献
|