Acid-labile handles for Fmoc solid-phase synthesis of peptide N-alkylamides

Summary By analogy to established methodology for the preparation of C-terminal peptide amides by 9-fluorenylmethyl-oxycarbonyl (Fmoc) chemistry, in conjunction with the acidolyzable 5-(4-Fmoc-aminomethyl-3,5-dimethoxyphenoxy)valeric acid (PAL, 1) handle, the present paper reports on 5-(4-(N-Fmoc-N-alkyl)aminomethyl-3,5-dimethoxyphenoxy)valeric acid [(R)PAL, 2] handles that can be used for synthesis of peptide N-alkylamides. The key step in the preparation of these handles was the NaBH₃CN-mediated reductive amination (60 to 85% yields; R=CH₃, CH₃CH₂, C₆H₅CH₂CH₂, 4-NO₂C₆H₅) of 5-(4-formyl-3,5-dimethoxyphenoxy)valeric acid (4), an aldehyde precursor to PAL. The (R)PAL handles (2a and b) were applied to the preparation of LHRH analogues. After anchoring of handles to PEG-PS supports, peptide chain assemblies were carried out, and treatments with TFA-thioanisolephenol-1,2-ethanedithiol (87:5:5:3) for 90 min at 25 °C, followed by aqueous workups, provided the expected products in excellent yields and purities as supported by HPLC and mass spectrometric characterization.Taken in part from the Ph.D. Thesis of M.F. Songster, University of Minnesota, 1996. Preliminary reports of this work were presented at the 14th American Peptide Symposium, Columbus, OH, June 18–23, 1995 (poster P047), and at the Fourth International Symposium on Solid Phase Synthesis and Combinatorial Chemical Libraries, Edinburgh, Scotland, UK, September 12–16, 1995.     

New Fmoc pseudoisocytosine monomer for the synthesis of a bis-PNA molecule by automated solid-phase Fmoc chemistry

The synthesis of N-[2-(N-9-fluorenylmethoxycarbonyl)aminoethyl]-N-(2-N-(benzyloxycarbonyl)isocytosin-5-ylacetyl)glycine monomer and its incorporation into a PNA molecule via automated Fmoc solid-phase chemistry is described.     

Fast conventional Fmoc solid-phase peptide synthesis with HCTU.

1H-Benzotriazolium 1-[bis(dimethyl-amino)methylene]-5-chloro-hexafluorophosphate (1-),3-oxide (HCTU) is a nontoxic, nonirritating and noncorrosive coupling reagent. Seven biologically active peptides (GHRP-6, (65-74)ACP, oxytocin, G-LHRH, C-peptide, hAmylin(1-37), and beta-amyloid(1-42)) were synthesized with reaction times reduced to deprotection times of 3 min or less and coupling times of 5 min or less using HCTU as the coupling reagent. Expensive coupling reagents or special techniques were not used. Total peptide synthesis times were dramatically reduced by as much as 42.5 h (1.8 days) without reducing the crude peptide purities. It was shown that HCTU can be used as an affordable, efficient coupling reagent for fast Fmoc solid-phase peptide synthesis.     

Novel prodrug approach to photodynamic therapy: Fmoc solid-phase synthesis of a cell permeable peptide incorporating 5-aminolaevulinic acid

The first example of the synthesis of a peptide incorporating 5-aminolaevulinic acid (5-ALA) using standard Fmoc solid-phase chemistry is reported. The synthesised peptide contains residues 52-58 of the cell-permeable peptide Penetratin and represents a prototype for the enhanced topical delivery of 5-ALA using such oligopeptide vectors. Effective intracellular conversion of the peptide to the endogenous photosensitiser, protoporphyrin IX, is observed in PAM212 cells, thus demonstrating the potential of this approach for the development of novel peptide prodrugs for use in photodynamic therapy.     

Preparation of phosphopeptide thioesters by Fmoc- and Fmoc(2-F)-solid phase synthesis

Efficient methods for the preparation of phosphopeptidethioesters were examined, using Fmoc-based solid-phase method.Phosphopeptide thioesters were obtained in good yields by theuse of 1-methylpyrrolidine, hexamethyleneimine and 1-hydroxybenzotriazole in a DMSO-DMF (1:1, v/v) solution fordeblocking the Fmoc groups. Epimerization, which is oftenobserved at the C-terminal amino acid, was effectivelysuppressed by shortening the time of deblocking process viathe use of highly base sensitive Fmoc(2-F) groups for -aminoprotection.     

Preparation of phosphopeptide thioesters by Fmoc- and Fmoc(2-F)-solid phase synthesis

Summary Efficient methods for the preparation of phosphopeptide thioesters were examined, using Fmoc-based solid-phase method. Phosphopeptide thioesters were obtained in good yields by the use of 1-methylpyrrolidine hexamethyl-eneimine and 1-hydroxybenzotriazole in a DMSO-DMF (1∶1, v/v) solution for deblocking the Fmoc groups. Epimerization, which is often observed at the C-terminal amino acid, was effectively suppressed by shortening the time of deblocking process via the use of highly base sensitive Fmoc(2-F) groups for α-amino protection.     

Nsc and Fmoc Nalpha-amino protection for solid-phase peptide synthesis: a parallel study.

The 2-(4-nitrophenylsulfonyl)ethoxycarbonyl (Nsc) group is an alternative to Fmoc for Nalpha-protection in solid-phase peptide synthesis. Nsc-amino acids may be particularly suitable for automatic synthesizers, in which the amino acids are stored in solution, and the incorporation of residues prone to racemization such as Cys and His. Owing to the hydrophilicity of the Nsc group, these derivatives are useful for the preparation of protected peptides in convergent solid-phase peptide synthesis strategies.     

Rapid semi-on-line monitoring of Fmoc solid-phase peptide synthesis by matrix-assisted laser desorption/ionization mass spectrometry

A simple yet highly effective application of matrix-assisted laser desorption/ionization massspectrometry (MALDI-MS) for the rapid monitoring of Fmoc solid-phase peptide synthesisis described. A few beads of the resin are removed at any desired step during synthesis, thefully protected peptide is cleaved from the resin and an MS spectrum of the analytes presentis produced. Some standard side-chain protecting groups may be cleaved off during samplepreparation for MS analysis; however, these cleavages are readily identified. Using thisapproach, incomplete amino acid acylations are readily detected in approximately the sametime as by traditional tests such as ninhydrin. The semi-on-line method also lends itself toready optimization of synthesis protocols and to the examination of resin-bound peptide sidereactions which may not be detectable by chemical means.     

Aqueous microwave-assisted solid-phase peptide synthesis using Fmoc strategy. III: Racemization studies and water-based synthesis of histidine-containing peptides

In this study, we describe the first aqueous microwave-assisted synthesis of histidine-containing peptides in high purity and with low racemization. We have previously shown the effectiveness of our synthesis methodology for peptides including difficult sequences using water-dispersible 9-fluorenylmethoxycarbonyl-amino acid nanoparticles. It is an organic solvent-free, environmentally friendly method for chemical peptide synthesis. Here, we studied the racemization of histidine during an aqueous-based coupling reaction with microwave irradiation. Under our microwave-assisted protocol using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride, the coupling reaction can be efficiently performed with low levels of racemization of histidine. Application of this water-based microwave-assisted protocol with water-dispersible 9-fluorenylmethoxycarbonyl-amino acid nanoparticles led to the successful synthesis of the histidine-containing hexapeptide neuropeptide W-30 (10–15), Tyr-His-Thr-Val-Gly-Arg-NH₂, in high yield and with greatly reduced histidine racemization.     

Improved Fmoc synthesis of bradykinin

Two arginine side-chain protecting groups, N(G)-4-methoxy-2,3,6-trimethylbenzensulfonyl group (Mtr) and N(G)-2,2,5,7,8-pentamethylchroman-6-sulfonyl (Pmc), have been investigated at both the Arg(1) and/or Arg(9) position of the bioactive peptide, Bradykinin using Fluorenylmethyloxycarbonyl (Fmoc) Solid Phase Peptide Synthesis. A more efficient synthesis of the peptide has been found when a combination of Arg(Mtr) is present at position 1 and Arg(Pmc) is present at position 9 giving a cleaved pure yield of 52%.     

Fmoc/solid-phase synthesis of Tyr(P)-containing peptides through t-butyl phosphate protection.

The synthesis of Tyr(P)-containing peptides by the use of Fmoc-Tyr(PO3Me2)-OH in Fmoc/solid phase synthesis is complicated since, firstly, piperidine causes cleavage of the methyl group from the -Tyr(PO3Me2)-residue during peptide synthesis and, secondly, harsh conditions are needed for its final cleavage. A very simple method for the synthesis of Tyr(P)-containing peptides using t-butyl phosphate protection is described. The protected phosphotyrosine derivative, Fmoc-Tyr(PO3tBu2)-OH was prepared in high yield from Fmoc-Tyr-OH by a one-step procedure which employed di-t-butyl N,N-diethyl-phosphoramidite as the phosphorylation reagent. The use of this derivative in Fmoc/solid phase peptide synthesis is demonstrated by the preparation of the Tyr(P)-containing peptides, Ala-Glu-Tyr(P)-Ser-Ala and Ser-Ser-Ser-Tyr(P)-Tyr(P).     

Rapid semi-on-line monitoring of Fmoc solid-phase peptide synthesis by matrix-assisted laser desorption/ionization mass spectrometry

Summary A simple yet highly effective application of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) for the rapid monitoring of Fmoc solid-phase peptide synthesis is described. A few beads of the resin are removed at any desired step during synthesis, the fully protected peptide is cleaved from the resin and an MS spectrum of the analytes present is produced. Some standard side-chain protecting groups may be cleaved off during sample preparation for MS analysis; however, these cleavages are readily identified. Using this approach, incomplete amino acid acylations are readily detected in approximately the same time as by traditional tests such as ninhydrin. The semi-on-line method also lends itself to ready optimization of synthesis protocols and to the examination of resin-bound peptide side reactions which may not be detectable by chemical means.     

A solid-phase approach towards the synthesis of PDE5 inhibitors

PDE5 inhibitors based upon the xanthine scaffold 8 have been expediently synthesized using a solid-phase route. Attachment of the xanthine scaffold 8 using the Rink chloride linker 4 and N-1 functionalization using Mitsunobu chemistry is described. A library of compounds was produced in multi-milligram quantities with excellent purities and acceptable yields. The compounds were tested for their PDE5 inhibitory activity.     

An efficient and practical method for solid-phase synthesis of tripeptide-bearing glycopeptide antibiotics: combinatorial parallel synthesis of carboxamide derivatives of chloroorienticin B

An efficient and practical method was established for solid-phase parallel synthesis of the peptide-bearing carboxamide derivatives of chloroorienticin B, and over 80 compounds were synthesized simultaneously. Among the derivatives prepared, compounds having both tryptophan and tyrosine residues (1-3) were found to possess potent antibacterial activity against VRE.     

Backbone amide linker (BAL) strategy for Nalpha-9-fluorenylmethoxycarbonyl (Fmoc) solid-phase synthesis of peptide aldehydes.

A rapid and efficient strategy has been developed for the general synthesis of complex peptide aldehydes. N(alpha)-Benzyloxycarbonylamino acids were converted to protected aldehyde building blocks for solid-phase synthesis in four steps and moderate overall yields. The aldehydes were protected as 1,3-dioxolanes except for one case where a dimethyl acetal was used. These protected amino aldehyde monomers were then incorporated onto 5-[(2 or 4)-formyl-3,5-dimethoxyphenoxy]butyryl-resin (BAL-PEG-PS) by reductive amination, following which the penultimate residue was introduced by HATU-mediated acylation. The resultant resin-bound dipeptide unit, anchored by a backbone amide linkage (BAL), was extended further by routine Fmoc chemistry procedures. Several model peptide aldehydes were prepared in good yields and purities. Some epimerization of the C-terminal residue occurred (10% to 25%), due to the intrinsic stereolability conferred by the aldehyde functional group, rather than any drawbacks to the synthesis procedure.     

An optimized Fmoc synthesis of human defensin 5

Human α-defensin 5 (DEF5), expressed by the Paneth cells of human small intestine, plays an important role in host defense against microbial infections. DEF5, a 32-residue peptide adopting a three-stranded β-sheet fold stabilized by three internal disulfide bonds, is not efficiently produced by recombinant expression techniques and is, therefore, an interesting goal for chemical synthesis. While DEF5 production by Boc-based solid-phase synthesis has been described, to date no synthetic account by the more convenient Fmoc method has been published. Herein, we report an optimized solid-phase synthesis of DEF5 using the Fmoc strategy. Starting from a rather problematic initial synthesis using standard Wang resin and coupling protocols, the sequence elongation process has been monitored by mini-cleavage and MS analysis at strategic points, to identify problematic spots and act accordingly. For expediency, some of the optimization rounds have been run on defensin 5 amide. Main modifications have included the ChemMatrix^® resin, known to decrease chain aggregation, and the use of pseudoproline dipeptide units at selected positions. Combination of some of these improvements results in a significantly purer product, to the extent that it can undergo in situ anaerobic oxidative folding to the native form without the need of an intermediate purification step. A typical synthesis run yielded about 15 mg of >95 % pure material. This approach should facilitate production of DEF5 and of selected analogs for structure–activity studies and other applications.     

An efficient Fmoc strategy for the rapid synthesis of peptide para-nitroanilides

A new strategy has been developed for the rapid synthesis ofpeptide para-nitroanilides (pNA). The method involves derivatization of commercially available tritylchloride resin(TCP-resin) with 1,4-phenylenediamine, subsequent coupling withdesired amino acids by the standard Fmoc protocol, and oxidationof the intermediate para-aminoanilides (pAA) with Oxone®. This procedure allows easy assembly of the desired para-aminoanilides (pAA) on standard resin and efficient oxidation and purification of the corresponding para-nitroanilides (pNA). The method allows easy access to any desired peptide para-nitroanilides, which are useful substrates for the characterization and study of proteolytic enzymes.     

Preparation of O-phosphotyrosine-containing peptides by Fmoc solid-phase synthesis: Evaluation of several Fmoc-Tyr(PO3R2)-OH derivatives

Summary The synthesis of two model Tyr(P)-containing peptides using Fmoc-Tyr(PO₃ tBu₂)-OH, Fmoc-Tyr(PO₃Bzl₂)-OH and Fmoc-Tyr(PO₃H₂)-OH established that the t-butylphosphate-protected derivative was the preferred derivative for use in Fmoc solid-phase peptide synthesis, since it afforded phosphopeptides in high purity and with the lowest amount of Tyr-peptide contamination. In addition, this study confirmed that commercially available Fmoc-Tyr(PO₃H₂)-OH is also suitable for use in Fmoc solid-phase synthesis but gives less pure phosphopeptides, along with the generation of 1–4% of the tyrosine-containing peptide for the model sequences studied. In view of the good performance of Fmoc-Tyr(PO₃ tBu₂)-OH, a large-scale three-step synthetic procedure was developed which involved phenacyl protection of the carboxyl group, phosphite-triester phosphorylation of the tyrosyl hydroxyl using di-t-butyl N,N-diethylphosphoramidite, and final removal of the phenacyl group by zinc reduction in acetic acid.Abbreviations BOP benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate - tBu t-butyl - Bzl benzyl - DBU 1,8-diazabicyclo[5,4,0]undec-7-ene - DMF N,N-dimethylformamide - EDT ethanedithiol - Fmoc 9-fluorenylmethoxycarbonyl - HOBt N-hydroxybenzotriazole - HPLC high performance liquid chromatography - NMM N-methylmorpholine - Pac phenacyl - TFA trifluoroacetic acid - THF tetrahydrofuran - Tyr(P) O-phosphotyrosine     

Two-dimensional parallel array technology as a new approach to automated combinatorial solid-phase organic synthesis

An automated, 96-well parallel array synthesizer for solid-phase organic synthesis has been designed and constructed. The instrument employs a unique reagent array delivery format, in which each reagent utilized has a dedicated plumbing system. An inert atmosphere is maintained during all phases of a synthesis, and temperature can be controlled via a thermal transfer plate which holds the injection molded reaction block. The reaction plate assembly slides in the X-axis direction, while eight nozzle blocks holding the reagent lines slide in the Y-axis direction, allowing for the extremely rapid delivery of any of 64 reagents to 96 wells. In addition, there are six banks of fixed nozzle blocks, which deliver the same reagent or solvent to eight wells at once, for a total of 72 possible reagents. The instrument is controlled by software which allows the straightforward programming of the synthesis of a larger number of compounds. This is accomplished by supplying a general synthetic procedure in the form of a command file, which calls upon certain reagents to be added to specific wells via lookup in a sequence file. The bottle position, flow rate, and concentration of each reagent is stored in a separate reagent table file. To demonstrate the utility of the parallel array synthesizer, a small combinatorial library of hydroxamic acids was prepared in high throughput mode for biological screening. Approximately 1300 compounds were prepared on a 10 μmole scale (3-5 mg) in a few weeks. The resulting crude compounds were generally >80% pure, and were utilized directly for high throughput screening in antibacterial assays. Several active wells were found, and the activity was verified by solution-phase synthesis of analytically pure material, indicating that the system described herein is an efficient means for the parallel synthesis of compounds for lead discovery. Copyright 1998 John Wiley & Sons, Inc.     

Recent progress in the field of glycopeptide synthesis

Glycosylation is a common post-translational modification of proteins. Although its significance in biological system is well recognized, approaches to analyze carbohydrate function are limited. This is because of difficulty in obtaining homogeneous glycoproteins from natural sources. Due to the progress of the carbohydrate and peptide chemistry, syntheses of various homogeneous glycopeptides and glycoproteins, which are suitable for biological studies, have been achieved by chemical means. In this review, we briefly summarize recent advances in the field of glycopeptide synthesis after 1999.