Cloning, characterization, and multiple chromosomal integration of a Bacillus alkaline protease gene

Extracellular Bacillus proteases are used as additives in detergent powders. We identified a Bacillus strain that produces a protease with an extremely alkaline pH optimum; this protease is suitable for use in modern alkaline detergent powders. The alkalophilic strain Bacillus alcalophilus PB92 gene encoding this high-alkaline serine protease was cloned and characterized. Sequence analysis revealed an open reading frame of 380 amino acids composed of a signal peptide (27 amino acids), a prosequence (84 amino acids), and a mature protein of 269 amino acids. Amino acid comparison with other serine proteases shows good homology with protease YaB, which is also produced by an alkalophilic Bacillus strain. Both show moderate homology with subtilisins but show some remarkable differences from subtilisins produced by neutrophilic bacilli. The prosequence of PB92 protease has no significant homology with prosequences of subtilisins. The abundance of negatively charged residues in the prosequences of PB92 protease is especially remarkable. The cloned gene was used to increase the production level of the protease. For this purpose the strategy of gene amplification in the original alkalophilic Bacillus strain was chosen. When introduced on a multicopy plasmid, the recombinant strain was unstable; under production conditions, plasmid segregation occurred. More stable ways of gene amplification were obtained by chromosomal integration. This was achieved by (i) homologous recombination, resulting in a strain with two tandemly arranged genes, and (ii) illegitimate recombination, resulting in a strain with a second copy of the protease gene on a locus not adjacent to the originally present gene. Both strains showed increased production and were more stable than the plasmid-containing strain. Absolute stability was only found when nontandem duplication occurred. This method of gene amplification circumvents stability problems often encountered in gene amplification in Bacillus species when plasmids or tandemly arranged genes in the chromosome are used.     

短小芽孢杆菌碱性蛋白酶基因启动子的克隆、鉴定及其应用

利用TAIL-PCR(Thermal asymmetric interlaced PCR)从短小芽孢杆菌基因组中扩增到碱性蛋白酶基因编码区上游的启动子片段。对该片段的序列测定和分析表明, 此片段长797 bp, 但与基因表达有关的序列长约390 bp。对启动子片段进行不同长度的缺失突变, 以获得最小的基因启动子片段, 结果表明, 该基因起始密码子上游约160 bp的DNA片段就可以启动基因的表达。将含有该片段的碱性蛋白酶基因WApQ3插入大肠杆菌-芽孢杆菌穿梭质粒载体pSUGV4中, 构建了碱性蛋白酶基因表达质粒pSUBpWApQ3。将该质粒分别转入枯草芽孢杆菌和短小芽孢杆菌中表达, 可在胞外检测到碱性蛋白酶活性, 最高酶活分别为466.5 U/mL和3060 U/mL。     

芽孢杆菌N1碱性蛋白酶的克隆表达及酶学性质

【背景】蛋白酶广泛应用于制革行业中,酶法脱毛对环境污染较小,但蛋白酶对化学试剂的不稳定性及胶原降解活性限制了其工业应用。【目的】克隆芽孢杆菌(Bacillussp.)N1基因组的碱性蛋白酶基因,实现其在大肠杆菌中的异源表达,并对重组酶酶学性质及脱毛作用进行研究。【方法】利用基因组文库法克隆获得蛋白酶基因aprG,构建重组大肠杆菌(Escherichiacoli)BL21(DE3)pLysS/pET-28a-aprG。异丙基-β-D-硫代半乳糖苷(IPTG)诱导表达该重组酶,以福林酚显色法对其酶学性质进行研究,并将AprG作用于羊皮、兔皮和羽毛。【结果】克隆得到蛋白酶基因aprG,并实现其在大肠杆菌中的表达。重组酶AprG最适反应温度为50°C,最适反应pH为10.0。各种金属离子对AprG活性影响较小,且AprG对表面活性剂和氧化剂、还原剂的耐受性较强。底物特异性分析表明,该酶胶原活性较低。AprG对羊皮和兔皮作用显著,且降解羽毛效果明显。【结论】蛋白酶AprG在制革行业中具有良好的应用前景。     

A new alkaline serine protease from alkalophilic Bacillus sp.: Cloning,sequencing, and characterization of an intracellular protease

To obtain a new serine protease from alkalophilic Bacillus sp. NKS-21, shotgun cloning was carried out. As a result, a new protease gene was obtained. It encoded an intracellular serine protease (ISP-1) in which there was no signal sequence. The molecular weight was 34,624. The protease showed about 50% homology with those of intracellular serine proteases (ISP-1) from Bacillus subtilis, B. polymyxa, and alkalophilic Bacillus sp. No. 221. The amino acid residues that form the catalytic triad, Ser, His and Asp, were completely conserved in comparison with subtilisins (the extracellular proteases from Bacillus). The cloned intracellular protease was expressed in Escherichia coli, and its purification and characterization were carried out. The enzyme showed stability under alkaline condition at pH 10 and tolerance to surfactants. The cloned ISP-1 digested well nucleoproteins, clupein and salmin, for the substrates.The nucleotide sequence data reported in this paper will appear in the GSDB, DDBJ, EMBL, and NCBI nucleotide sequence databases with the accession number D37921.     

嗜碱芽孢杆菌PB92碱性蛋白酶基因启动子的克隆及应用

摘要: 利用TAIL-PCR方法从嗜碱芽孢杆菌PB92基因组中扩增出碱性蛋白酶基因上游启动子活性片段, 测序分析后登录GenBank(EU130686)。此序列具有多个启动子特征区域, 且在－538~－370 bp和－275~－128 bp两个区域存在反向读码框。对启动子片段进行功能缺失的分析结果表明, TSS上游105 bp片段具有明显启动子活性, 但以长为414 bp~619 bp时活性更为显著。此外, 对PB92碱性蛋白酶的信号肽分析结果表明, 此信号肽具有典型分泌型(Sec-type)信号肽结构。将PB92碱性蛋白酶基因启动子和信号肽序列克隆入pBE2, 构建成表达载体pBEAC, 并以其为载体实现了植物甜蛋白monellin基因在枯草芽孢杆菌1A751中的高效表达。     

Cloning and characterization of the Bacillus licheniformis gene coding for alkaline phosphatase.

The structural gene for alkaline phosphatase (orthophosphoric monoester phosphohydrolase; EC 3.1.3.1) of Bacillus licheniformis MC14 was cloned into the Pst1 site of pMK2004 from chromosomal DNA. The gene was cloned on an 8.5-kilobase DNA fragment. A restriction map was developed, and the gene was subcloned on a 4.2-kilobase DNA fragment. The minimum coding region of the gene was localized to a 1.3-kilobase region. Western blot analysis was used to show that the gene coded for a 60,000-molecular-weight protein which cross-reacts with anti-alkaline phosphatase prepared against the salt-extractable membrane alkaline phosphatase of B. licheniformis MC14 .     

Phosphoribosylpyrophosphate synthetase of Bacillus subtilis. Cloning, characterization and chromosomal mapping of the prs gene

The gene (prs) encoding phosphoribosylpyrophosphate (PRPP) synthetase has been cloned from a library of Bacillus subtilis DNA by complementation of an Escherichia coli prs mutation. Flanking DNA sequences were pruned away by restriction endonuclease and exonuclease BAL 31 digestions, resulting in a DNA fragment of approx. 1.8 kb complementing the E. coli prs mutation. Minicell experiments revealed that this DNA fragment coded for a polypeptide, shown to be the PRPP synthetase subunit, with an Mr of approx. 40,000. B. subtilis strains harbouring the prs gene in a multicopy plasmid contained up to nine-fold increased PRPP synthetase activity. The prs gene was cloned in an integration vector and the resulting hybrid plasmid inserted into the B. subtilis chromosome by homologous recombination. The integration site was mapped by transduction and the gene order established as purA-guaA-prs-cysA.     

Bacillus licheniformis6816碱性蛋白酶基因在E.coli中的克隆和表达

用PCR方法从地衣芽孢杆菌6816中扩增了碱性蛋白酶基因（apr),扩增的1.14kb的DNA片段插入到大肠杆菌载体pET-20b中,构建成重组分泌型表达载体pAPR1。pAPR1中碱性蛋白酶基因在大肠杆菌宿主JM109（DE3）中得到表达,SDS-PAGE分析显示融合表达产物的分子量为30kD,同核酸序列测定所推导的值相符,表达产物占细胞总蛋白的7.5%,重组菌的酶活比出发菌株提高了3.3倍,研究发现,重组的碱性蛋白酶在进入大肠杆菌周质空间时存在前肽自动脱落的现象。     

Purification and characterization of a novel alkaline protease from Bacillus horikoshii

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; K(2)HPO(4), 2; KH(2)PO(4), 2; maltose, 20; sodium citrate, 10; MgSO(4), 0.06; NaCl, 8; and Na(2)CO(3), 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CMSepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The K(m) and k(cat) values were 78.7 μM and 217.4 s(-1) for N-succinyl-Ala- Ala-Pro-Phe-pNA at 37° C and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and H(2)O(2), has significance for industrial application, such as additives in detergent and feed industries.     

Cloning and over-expression of an alkaline protease from Bacillus licheniformis

The alkaline protease gene, apr, from Bacillus licheniformis 2709 was cloned into a Bacillus shuttle expression vector, pHL, to yield the recombinant plasmid pHL-apr. The pHL-apr was expressed in Bacillus subtilis WB600, yielding a high expression strain BW-016. The amount of alkaline protease produced in the recombinant increased by 65% relative to the original strain. SDS-PAGE analysis indicated a Mr of 30.5 kDa. The amino acid sequence deduced from the DNA sequence analysis revealed a 98% identity to that of Bacillus licheniformis 6816.     

Bleach-stable, alkaline protease from Bacillus sp.

A bleach-stable, thermotolerant, alkaline protease for detergent formulation from a newly isolated Bacillus SB5 is reported. Most (85%) activity of the enzyme was retained in the presence of 10% (v/v) H2O2 and 1% SDS (w/v) at 40°C, after 1 h. The enzyme was optimal at pH 10 and 60°C to 70°C. Enzyme activity was enhanced 30 to 80% in presence of ionic and non-ionic detergents, surfactants and commercial detergents or bleach.     

Cloning and characterization of the gene for an additional extracellular serine protease of Bacillus subtilis.

We have purified a minor extracellular serine protease from a strain of Bacillus subtilis bearing null mutations in five extracellular protease genes: apr, npr, epr, bpr, and mpr (A. Sloma, C. Rudolph, G. Rufo, Jr., B. Sullivan, K. Theriault, D. Ally, and J. Pero, J. Bacteriol. 172:1024-1029, 1990). During purification, this novel protease (Vpr) was found bound in a complex in the void volume after gel filtration chromatography. The amino-terminal sequence of the purified protein was determined, and an oligonucleotide probe was constructed on the basis of the amino acid sequence. This probe was used to clone the structural gene (vpr) for this protease. The gene encodes a primary product of 806 amino acids. The amino acid sequence of the mature protein was preceded by a signal sequence of approximately 28 amino acids and a prosequence of approximately 132 amino acids. The mature protein has a predicted molecular weight of 68,197; however, the isolated protein has an apparent molecular weight of 28,500, suggesting that Vpr undergoes C-terminal processing or proteolysis. The vpr gene maps in the ctrA-sacA-epr region of the chromosome and is not required for growth or sporulation.     

Purification and characterization of a thermostable alkaline protease from alkalophilic Bacillus pumilus

AIMS: An investigation was carried out on the purification and characterization of an alkaline protease from Bacillus pumilus MK6-5. METHODS AND RESULTS: An alkalophilic Bacillus pumilus MK6-5 was grown in a laboratory fermenter containing 1% reverse osmosis concentrated cheese whey powder, 0.25% corn steep liquor, 1% glucose, 0.5% tryptone, 1% sodium citrate, 0.02% MgSO4.7H2O and 0.65% Na2CO3 at 35 degrees C and pH 9.6, agitation at 250 rev min(-1) and aeration of 1 vvm for 60 h. When the enzyme was purified using ammonium sulphate precipitation, ion exchange and gel filtration chromatographies, a 26.2% recovery of enzyme with 36.6-fold purification was recorded. The purified protease was found to be homogenous by SDS-PAGE with molecular mass estimate of 28 kDa. The enzyme was optimally active at pH 11.5 and temperature of 55-60 degrees C. The Km and kcat values observed with synthetic substrates at 37 degrees C and pH 8.0 were 1.1 mmol l(-1) and 624 s(-1) for Glu-Gly-Ala-Phe-pNA and 3.7 mmol l(-1) and 826 s(-1) for Glu-Ala-Ala-Ala-pNA, respectively. The kinetic data revealed that small aliphatic and aromatic residues were the preferred residues at the P1 position. Inhibition profile exhibited by PMSF suggested the B. pumilus protease to be an alkaline serine protease. CONCLUSIONS: Bacillus pumilus MK6-5 produced a calcium-dependent, thermostable alkaline serine protease. SIGNIFICANCE AND IMPACT OF THE STUDY: The thermostable alkaline protease from Bacillus pumilus MK6-5 will be extremely useful in ultrafiltration membrane cleaning due to its ability to work in broad pH and temperature ranges, and tolerance to detergents, unlike the mesophilic proteases which face these limitations.     

Cloning and expression of a novel protease gene encoding an extracellular neutral protease from Bacillus subtilis.

We have cloned from Bacillus subtilis a novel protease gene (nprB) encoding a neutral protease by using a shotgun cloning approach. The gene product was determined to have a molecular mass of 60 kDa. It has a typical signal peptide-like sequence at the N-terminal region. The expression of nprB can be stimulated by using a B. subtilis strain, WB30, carrying a sacU(h)h mutation. Expression of this protease gene results in production of a 37-kDa protease in the culture medium. The first five amino acid residues from the N terminus of the mature protease were determined to be Ala-Ala-Gly-Thr-Gly. This indicates that the protease is synthesized in a preproenzyme form. The purified protease has a pH optimum of around 6.6, and its activity can be inhibited by EDTA, 1,10-phenanthroline (a zinc-specific chelator), and dithiothreitol. It retained 65% of its activity after treatment at 65 degrees C for 20 min. Sequence comparison indicates that the mature form of this protease has 66% homology with the two thermostable neutral proteases from B. thermoproteolyticus and B. stearothermophilus. It also shares 65, 61, and 56% homology with the thermolabile neutral proteases from B. cereus, B. amyloliquefaciens, and B. subtilis, respectively. The zinc-binding site and the catalytic residues are all conserved among these proteases. Sequence homology extends into the "propeptide" region. The nprB gene was mapped between metC and glyB and was not required for growth or sporulation.     

Purification and characterization of a heat-stable alkaline protease from Bacillus stearothermophilus F1

A thermophilic Bacillus stearothermophilus F1 that produced an extremely thermostable alkaline protease was isolated from decomposed oil palm branches. The isolated protease was purified to homogeneity by heat treatment, ultrafiltration and gel filtration chromatography with a 128-fold increase in specific activity and 75% recovery. The protease, which is a serine-type enzyme, has a relative molecular mass of 33 500 by sodium dodecyl sulphate-polyacrylamide gel electrophoresis but only 20 000 by gel-filtration chromatography. The enzyme was optimally active at pH 9.0 and was stable for 24 h at 70° C and in the pH range from 8.0 to 10.0. It was capable of hydrolysing many soluble and insoluble protein substrates but no esterase activity was detected. The enzyme activity was markedly inhibited by Co²⁺ and Hg²⁺, whereas Mg²⁺, Fe²⁺, Cu²⁺, Zn²⁺ and Sr²⁺ had little or no inhibitory effect. However, Mn²⁺ strongly activated the protease activity. The protease exhibited a high degree of thermostability [t _1/2 (85° C) = 4 h, (90° C) = 25 min]. The stability at higher temperatures (85° C and above) was shown to be dependent on the presence of Ca²⁺. Correspondence to: A. B. Salleh     

Purification and characterization of a serine alkaline protease from Bacillus clausii GMBAE 42

An extracellular serine alkaline protease of Bacillus clausii GMBAE 42 was produced in protein-rich medium in shake-flask cultures for 3 days at pH 10.5 and 37°C. Highest alkaline protease activity was observed in the late stationary phase of cell cultivation. The enzyme was purified 16-fold from culture filtrate by DEAE-cellulose chromatography followed by (NH₄)₂SO₄ precipitation, with a yield of 58%. SDS-PAGE analysis revealed the molecular weight of the enzyme to be 26.50 kDa. The optimum temperature for enzyme activity was 60°C; however, it is shifted to 70°C after addition of 5 mM Ca²⁺ ions. The enzyme was stable between 30 and 40°C for 2 h at pH 10.5; only 14% activity loss was observed at 50°C. The optimal pH of the enzyme was 11.3. The enzyme was also stable in the pH 9.0–12.2 range for 24 h at 30°C; however, activity losses of 38% and 76% were observed at pH values of 12.7 and 13.0, respectively. The activation energy of Hammarsten casein hydrolysis by the purified enzyme was 10.59 kcal mol⁻¹ (44.30 kJ mol⁻¹). The enzyme was stable in the presence of the 1% (w/v) Tween-20, Tween-40,Tween-60, Tween-80, and 0.2% (w/v) SDS for 1 h at 30°C and pH 10.5. Only 10% activity loss was observed with 1% sodium perborate under the same conditions. The enzyme was not inhibited by iodoacetate, ethylacetimidate, phenylglyoxal, iodoacetimidate, n-ethylmaleimidate, n-bromosuccinimide, diethylpyrocarbonate or n-ethyl-5-phenyl-iso-xazolium-3′-sulfonate. Its complete inhibition by phenylmethanesulfonylfluoride and relatively high k _cat value for N-Suc-Ala-Ala-Pro-Phe-pNA hydrolysis indicates that the enzyme is a chymotrypsin-like serine protease. K _m and k _cat values were estimated at 0.655 μM N-Suc-Ala-Ala-Pro-Phe-pNA and 4.21×10³ min⁻¹, respectively.     

Increased production of Bacillus keratinase by chromosomal integration of multiple copies of the kerA gene

To increase the production of keratinase, stable strains of Bacillus licheniformis carrying multiple keratinase gene copies in the chromosome were developed. Integrative vectors carrying kerA with or without P43-promoter were constructed and subcloned into B. licheniformis T399D and Bacillus subtilis DB104. In T399D, multiple copies of kerA integration into the chromosome were identified and determined by Southern blot. The optimal integration of kerA was found in the range of 3-5 copies. Higher integration of gene copies (>5) caused reduced processing and secretion of the extracellular keratinase. In DB104, kerA was cloned in the plasmid, not integrated into the chromosome. The strong constitutive promoter P43 not only increased the keratinase production in plasmid-based expression in DB104 but also improved the enzyme yield of the integrants of T399D. New strains were able to enhance cell growth and enzyme yield at higher concentrations of medium substrate. When they were grown in either soy or feather medium, the keratinase activity was stable and improved by about 4-6 times.     

Cloning, characterization, and inactivation of the Bacillus brevis lon gene.

A gene of Bacillus brevis HPD31 analogous to the Escherichia coli lon gene has been cloned and characterized. The cloned gene (B. brevis lon gene) encodes a polypeptide of 779 amino acids with a molecular weight of 87,400 which resembles E. coli protease La, the lon gene product. Fifty-two percent of the amino acid residues of the two polypeptides were identical. The ATP-binding sequences found in E. coli protease La were highly conserved. The promoter of the B. brevis lon gene resembled that recognized by the major RNA polymerase of Bacillus subtilis and did not contain sequences homologous to the E. coli heat shock promoters. The B. brevis lon gene was inactivated by insertion of the neomycin resistance gene. A mutant B. brevis carrying the inactivated lon gene showed diminished ability for the degradation of abnormal polypeptides synthesized in the presence of puromycin.     

Cloning and sequencing of the alkaline extracellular protease gene of Yarrowia lipolytica.

The XPR2 gene encoding an alkaline extracellular protease (AEP) from Yarrowia lipolytica was cloned, and its complete nucleotide sequence was determined. The amino acid sequence deduced from the nucleotide sequence reveals that the mature AEP consists of 297 amino acids with a relative molecular weight of 30,559. The gene codes for a putative 22-amino-acid prepeptide (signal sequence) followed by an additional 135-amino-acid propeptide containing a possible N-linked glycosylation site and two Lys-Arg peptidase-processing sites. The final Lys-Arg site occurs at the junction with the mature, extracellular form. The mature protease contains two potential glycosylation sites. AEP is a member of the subtilisin family of serine proteases, with 42.6% homology to the fungal proteinase K. The functional promoter is more than 700 base pairs long, allowing for the observed complex regulation of this gene. The 5' and 3' flanking regions of the XPR2 gene have structural features in common with other yeast genes.