Periodic operation of immobilized live cell bioreactor for the production of candicidin

A lumped model for cell growth and secondary metabolite production in an immobilized live cell bioreactor has been developed. This model is applied here to simulate the performance of an immobilized bioreactor under steady-state conditions and under conditions of periodically varying concentration of a growth-limiting substrate. The results of the simulation study were experimentally verified in the case of the production of the antibiotic candicidin by Streptomyces griseus in an immobilized bioreactor with forced periodic operation. The results of the studies suggest that periodically operated immobilized live cell bioreactors can provide a potent alternative for the production of non-growth-associated biochemicals, as compared to free cell fermentations, pulsed fermentations with process cycle regeneration, and nonregenerated bioreactors. This work has demonstrated that by frequent pulsing of the growth limiting nutrient, stable extended production can be obtained at high specific cellular productivities.     

Rigorous model for spherical cell-support aggregate

The activity of immobilized cell-support particle aggregates is influenced by physical and biochemical elements, mass transfer, and physiology. Accordingly, the mathematical model discussed in this study is capable of predicting the steady state and transient concentration profiles of the cell mass and substrate, plus the effects of the substrate and product inhibition in an immobilized cell-support aggregate. The overall mathematical model is comprised of material balance equations for the cell mass, major carbon source, dissolved oxygen, and non-biomass products in a bulk suspension along with a single particle model. A smaller bead size and higher substrate concentration at the surface of the particle, resulted in a higher supply of the substrate into the aggregate and consequently a higher biocatalyst activity.     

Periodic operation of bioreactors for autocatalytic reactions with Michaelis-Menten kinetics

The performance of an isothermal tubular bioreactor carrying out autocatalytic reactions obeying Michaelis-Menten Kinetics is analyzed for improvement in the average yield of product B. Under steady-state condition, the reactor is shown to exhibit input multiplicities in the yield of B with the mean residence time. Simulation results show that a significant improvement in the average yield of B is obtained under feed substrate concentration cycling. The two values of mean residence time giving identical yield under conventional steady-state operation is shown to give distinctly different behaviour under periodic operation. The lower value of the residence time gives improved average yield of B. The performances of the reactor with power law kinetics and that with the Michaelis-Menten kinetics show distinct average yield under periodic operation even though steady-state operation gives identical yield.     

Acetone-butanol-ethanol (ABE) fermentation in an immobilized cell trickle bed reactor

Acetone-butanol-ethanol (ABE) fermentation was successfully carried out in an immobilized cell trickle bed reactor. The reactor was composed of two serial columns packed with Clostridium acetobutylicum ATCC 824 entrapped on the surface of natural sponge segments at a cell loading in the range of 2.03-5.56 g dry cells/g sponge. The average cell loading was 3.58 g dry cells/g sponge. Batch experiments indicated that a critical pH above 4.2 is necessary for the initiation of cell growth. One of the media used during continuous experiments consisted of a salt mixture alone and the other a nutrient medium containing a salt mixture with yeast extract and peptone. Effluent pH was controlled by supplying various fractions of the two different types of media. A nutrient medium fraction above 0.6 was crucial for successful fermentation in a trickle bed reactor. The nutrient medium fraction is the ratio of the volume of the nutrient medium to the total volume of nutrient plus salt medium. Supplying nutrient medium to both columns continuously was an effective way to meet both pH and nutrient requirement. A 257-mL reactor could ferment 45 g/L glucose from an initial concentration of 60 g/L glucose at a rate of 70 mL/h. Butanol, acetone, and ethanol concentrations were 8.82, 5.22, and 1.45 g/L, respectively, with a butanol and total solvent yield of 19.4 and 34.1 wt %. Solvent productivity in an immobilized cell trickle bed reactor was 4.2 g/L h, which was 10 times higher than that obtained in a batch fermentation using free cells and 2.76 times higher than that of an immobilized CSTR. If the nutrient medium fraction was below 0.6 and the pH was below 4.2, the system degenerated. Oxygen also contributed to the system degeneration. Upon degeneration, glucose consumption and solvent yield decreased to 30.9 g/L and 23.0 wt %, respectively. The yield of total liquid product (40.0 wt %) and butanol selectivity (60.0 wt %) remained almost constant. Once the cells were degenerated, they could not be recovered.     

An immobilized cell reactor with simultaneous product separation. II. Experimental reactor performance

The simultaneous separation of volatile fermentation products from product-inhibited fermentations can greatly increase the productivity of a bioreactor by reducing the product concentration in the bioreactor, as well as concentrating the product in an output stream free of cells, substrate, or other feed impurities. The Immobilized Cell Reactor-Separator (ICRS) consists of two column reactors: a cocurrent gas-liquid "enricher" followed by a countercurrent "stripper" The columns are four-phase tubular reactors consisting of (1) an inert gas phase, (2) the liquid fermentation broth, (3) the solid column internal packing, and (4) the immobilized biological catalyst or cells. The application of the ICRS to the ethanol-from-whey-lactose fermentation system has been investigated. Operation in the liquid continuous or bubble flow regime allows a high liquid holdup in the reactor and consequent long and controllable liquid residence time but results in a high gas phase pressure drop over the length of the reactor and low gas flow rates. Operation in the gas continuous regime gives high gas flow rates and low pressure drop but also results in short liquid residence time and incomplete column wetting at low liquid loading rates using conventional gas-liquid column packings. Using cells absorbed to conventional ceramic column packing (0.25-in. Intalox saddles), it was found that a good reaction could be obtained in the liquid continuous mode, but little separation, while in the gas continuous mode there was little reaction but good separation. Using cells sorbed to an absorbant matrix allowed operation in the gas continuous regime with a liquid holdup of up to 30% of the total reactor volume. Good reaction rates and product separation were obtained using this matrix. High reaction rates were obtained due to high density cell loading in the reactor. A dry cell density of up to 92 g/L reactor was obtained in the enricher. The enricher ethanol productivity ranged from 50 to 160 g/L h while the stripper productivity varied from 0 to 32 g/L h at different feed rates and concentrations. A separation efficiency of as high as 98% was obtained from the system.     

An immobilized cell reactor with simultaneous product separation. I. Reactor design and analysis

A four-phase reactor-separator (gas, liquid, solid, and immobilized catalyst) is proposed for fermentations characterized by a volatile product and nonvolatile substrate.In this reactor, the biological catalyst is immobilized onto a solid column packing and contacted by the liquid containing the substrate.A gas phase is also moved through the column to strip the volatile product into the gas phase. The Immobilized Cell Reactor-Separator (ICRS) consists of two basic gas-liquid flow sections: a cocurrent "enricher" followed by a countercurrent-"stripper".In this article, an equilibrium stage model of the reactor is developed to determine the feasibility and important operational variables of such a reactor-separator. The ICRS concept is applied to the ethanol from whey lactose fermentation using some preliminary immobilized cell reactor performance data. A mathematical model for a steady-state population based on an adsorbed monolayer of cells is also developed for the reactor. The ICRS model demonstrated that the ICRS should give a significant increase in reactor productivity as compared to an identically sized Immobilized Cell Reactor (ICR) with no separation. The gas-phase separation of the product also allows fermentation of high inlet substrate concentrations. The model is used to determine the effects of reactor parameters on ICRS performance including temperature, pressure, gas flow rates, inlet substrate concentration, and degree of microbial product inhibition.     

Continuous alpha-amylase production using Bacillus amyloliquefaciens adsorbed on an ion exchange resin

Summary A method for the continuous production of extracellular alpha amylase by surface immobilized cells of Bacillus amyloliquefaciens NRC 2147 has been developed. A large-pore, macroreticular anionic exchange resin was capable of initially immobilizing an effective cell concentration of 17.5 g DW/1 (based on a total reactor volume of 160 ml). The reactor was operated continuously with a nutrient medium containing 15 g/l soluble starch, as well as yeast extract and salts. Aeration was achieved by sparging oxygen enriched air into the column inlet. Fermentor plugging by cells was avoided by periodically substituting the nutrient medium with medium lacking in both soluble starch and yeast extract. This fermentor was operated for over 200 h and obtained a steady state enzyme concentration of 18700 amylase activity units per litre (18.7 kU/l), and an enzyme volumetric productivity of 9700 amylase activity units per litre per hour (9.7 kU/l-h). Parallel fermentations were performed using a 2 l stirred vessel fermentor capable of operation in batch and continuous mode. All fermentation conditions employed were identical to those of the immobilized cell experiments in order to assess the performance of the immobilized cell reactor. Batch stirred tank operation yielded a maximum amylase activity of 150 kU/l and a volumetric productivity of 2.45 kU/l-h. The maximum cell concentration obtained was 5.85 g DW/l. Continuous stirred tank fermentation obtained a maximum effluent amylase activity of 6.9 kU/l and a maximum enzyme volumetric productivity of 2.73 kU/l-h. Both of these maximum values were observed at a dilution rate of 0.345 l/h. The immobilized cell reactor was observed to achieve larger volumetric productivities than either mode of stirred tank fermentation, but achieved an enzyme activity concentration lower than that of the batch stirred tank fermentor.     

Isomaltulose production using immobilized cells

Three strains of Erwinia rhapontici especially suitable for use in the form of nongrowing immobilized cells were selected by screening strains of cells for high activity and operational stability in an immobilized form. Immobilization in calcium alginate gel pellets was easily the best method of immobilizing E. rhapontici. Much greater operational stabilities were obtained than when other immobilization methods were used. Conditions of operation which optimize the activity, stability, and yield and the ease of operation of the immobilized cell columns working in a steady state are described. These include the effects of substrate concentration, diffusional restrictions and water activity, the concentration of cells immobilized, and the type of reactor used. Thus, the immobilized cells produce about 1500 times their own weight of isomaltulose during one half-life of use (ca. 1 year). Loss of activity was most closely correlated with the volume of substrate processed and so presumably is due to the presence of low concentrations of a cummulative inhibitor in the substrate. Methods for regenerating the activity of the immobilized cells by the periodic administration of nutrients, of forming isomaltulose by continuously supplying nutrients to growing immobilized cells, and of crystallizing isomaltulose from the column eluate are also described.     

Ethanol fermentation in an immobilized cell reactor using Saccharomyces cerevisiae

Fermentation of sugar by Saccharomyces cerevisiae, for production of ethanol in an immobilized cell reactor (ICR) was successfully carried out to improve the performance of the fermentation process. The fermentation set-up was comprised of a column packed with beads of immobilized cells. The immobilization of S. cerevisiae was simply performed by the enriched cells cultured media harvested at exponential growth phase. The fixed cell loaded ICR was carried out at initial stage of operation and the cell was entrapped by calcium alginate. The production of ethanol was steady after 24 h of operation. The concentration of ethanol was affected by the media flow rates and residence time distribution from 2 to 7 h. In addition, batch fermentation was carried out with 50 g/l glucose concentration. Subsequently, the ethanol productions and the reactor productivities of batch fermentation and immobilized cells were compared. In batch fermentation, sugar consumption and ethanol production obtained were 99.6% and 12.5% v/v after 27 h while in the ICR, 88.2% and 16.7% v/v were obtained with 6 h retention time. Nearly 5% ethanol production was achieved with high glucose concentration (150 g/l) at 6 h retention time. A yield of 38% was obtained with 150 g/l glucose. The yield was improved approximately 27% on ICR and a 24 h fermentation time was reduced to 7 h. The cell growth rate was based on the Monod rate equation. The kinetic constants (K(s) and mu(m)) of batch fermentation were 2.3 g/l and 0.35 g/lh, respectively. The maximum yield of biomass on substrate (Y(X-S)) and the maximum yield of product on substrate (Y(P-S)) in batch fermentations were 50.8% and 31.2% respectively. Productivity of the ICR were 1.3, 2.3, and 2.8 g/lh for 25, 35, 50 g/l of glucose concentration, respectively. The productivity of ethanol in batch fermentation with 50 g/l glucose was calculated as 0.29 g/lh. Maximum production of ethanol in ICR when compared to batch reactor has shown to increase approximately 10-fold. The performance of the two reactors was compared and a respective rate model was proposed. The present research has shown that high sugar concentration (150 g/l) in the ICR column was successfully converted to ethanol. The achieved results in ICR with high substrate concentration are promising for scale up operation. The proposed model can be used to design a lager scale ICR column for production of high ethanol concentration.     

A novel feeding strategy for enhanced plasmid stability and protein production in recombinant yeast fedbatch fermentation

A novel feeding strategy in fedbatch recombinant yeast fermentation was developed to achieve high plasmid stability and protein productivity for fermentation using low-cost rich (non-selective) media. In batch fermentations with a recombinant yeast, Saccharomyces cerevisiae, which carried the plasmid pSXR125 for the production of beta-galactosidase, it was found that the fraction of plasmid-carrying cells decreased during the exponential growth phase but increased during the stationary phase. This fraction increase in the stationary phase was attributed to the death rate difference between the plasmid-free and plasmid-carrying cells caused by glucose starvation in the stationary phase. Plasmid-free cells grew faster than plasmid-carrying cells when there were plenty of growth substrate, but they also lysed or died faster upon the depletion of the growth substrate. Thus, pulse additions of the growth substrate (glucose) at appropriate time intervals allowing for significant starvation period between two consecutive feedings during fedbatch fermentation should have positive effects on stabilizing plasmid and enhancing protein production. A selective medium was used to grow cells in the initial batch fermentation, which was then followed with pulse feeding of concentrated non-selective media in fedbatch fermentation. Both experimental data and model simulation show that the periodic glucose starvation feeding strategy can maintain a stable plasmid-carrying cell fraction and a stable specific productivity of the recombinant protein, even with a non-selective medium feed for a long operation period. On the contrary, without glucose starvation, the fraction of plasmid-carrying cells and the specific productivity continue to drop during the fedbatch fermentation, which would greatly reduce the product yield and limit the duration that the fermentation can be effectively operated. The new feeding strategy would allow the economic use of a rich, non-selective medium in high cell density recombinant fedbatch fermentation. This new feeding strategy can be easily implemented with a simple IBM-PC based control system, which monitors either glucose or cell concentration in the fermentation broth.     

Lactic acid fermentation in a recycle batch reactor using immobilized Lactobacillus casei

Lactic acid production by recycle batch fermentation using immobilized cells of Lactobacillus casei subsp. rhamnosus was studied. The culture medium was composed of whey treated with an endoprotease, and supplemented with 2.5 g/L of yeast extract and 0.18 mM Mn(2+) ions. The fermentation set-up comprised of a column packed with polyethyleneimine-coated foam glass particles, Pora-bact A, and connected with recirculation to a stirred tank reactor vessel for pH control. The immobilization of L. casei was performed simply by circulating the culture medium inoculated with the organism over the beads. At this stage, a long lag period preceded the cell growth and lactic acid production. Subsequently, for recycle batch fermentations using the immobilized cells, the reducing sugar concentration of the medium was increased to 100 g/L by addition of glucose. The lactic acid production started immediately after onset of fermentation and the average reactor productivity during repeated cycles was about 4.3 to 4.6 g/L . h, with complete substrate utilization and more than 90% product yield. Sugar consumption and lactate yield were maintained at the same level with increase in medium volume up to at least 10 times that of the immobilized biocatalyst. The liberation of significant amounts of cells into the medium limited the number of fermentation cycles possible in a recycle batch mode. Use of lower yeast extract concentration reduced the amount of suspended biomass without significant change in productivity, thereby also increasing the number of fermentation cycles, and even maintained the D-lactate amount at low levels. The product was recovered from the clarified and decolorized broth by ion-exchange adsorption. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:841-853, 1997.     

Computer modeling of antibiotic fermentation with on-line product removal

The fermentation of Streptomyces griseus for the production of cycloheximide is similar to other antibiotic fermentations in that product synthesis is subject to feedback regulation and the desired product is degraded in the fermentation broth. The productivity of this fermentation can thus be dramatically increased by removing the antibiotic from the whole broth as it is produced. One means for effecting this on-line product removal is to contact the whole fermentation broth with neutral polymeric resin immobilized in hydrogel beads. The antibiotic adsorbs to the immobilized resin via hydrophobic interactions. In this work, the adsorption of the antibiotic onto the immobilized resin was characterized. A biochemical model of the fermentation was then used to describe the time profiles of biomass, substrate, and antibiotic in a fermentation system in which whole broth is circulated from the fermentor through a continuously stirred extractor containing the adsorbent beads. Various operating conditions were examined to optimize the productivity of the fermentation.     

SSF production of lactic acid from cellulosic biosludges

The use of cellulosic biosludges generated in a Kraft pulp mill was investigated as substrate for lactic acid production by simultaneous saccharification and fermentation (SSF). The effect of the operation mode (batch or fedbatch), the initial liquid to solid ratio (12 or 30 g/g) and the nutrient supplementation (MRS components or none) on several parameters including lactic acid concentration, volumetric productivity and product yields, were evaluated. When the operation was carried out in fedbatch mode with nutrient supplementation and using a LSR(0)=12 g/g, a broth containing 42 g/L was obtained after 48 h with a volumetric productivity of 0.87 g/L h and a product yield of 37.8 g lactic acid/100 g biosludges. In a similar experiment carried out without nutrient supplementation, a lactic acid concentration of 39.4 g/L was obtained after 48 h with a volumetric productivity of 0.82 g/L h and a product yield of 35.5 g L-lactic acid/100 g biosludges.     

Minimal nutritional requirements for immobilized yeast

The effect of reduced nutritional levels (particularly nitrogen source) for immobilized K. fragilis type yeast were studied using a trickle flow, "differential" plug flow type reactor with cells immobilized by adsorption onto an absorbant packing matrix. Minimizing nutrient levels in a feed stream to an immobilized cell reactor (ICR) might have the benefits of reducing cell growth and clogging problems in the ICR, reducing feed preparation costs, as well as reducing effluent disposal costs. In this study step changes in test feed medium nutrient compositions were introduced to the ICR, followed by a return to a basal medium. Gas evolution rates were monitored and logged on a continuous basis, and effluent cell density was used as an indicator of cell growth rate of the immobilized cell mass. Startup of the reactor using a YEP medium showed a rapid buildup of cells in the reactor during the initial 110 h operation. The population density then stabilized at 1.6 x 10(11) cells/g sponge. A defined medium containing a complex mix of essential nutrients with an inorganic nitrogen source (ammonium sulfate) was able to maintain 90% of the productivity in the ICR as compared to the YEP medium, but proved unable to promote growth of the immobilized cell mass during startup. Experiments on reduced ammonium sulfate in the defined medium, and reduced yeast extract and peptone in YEP medium indicated that stable productivity could be maintained for extended periods (80 h) in the complete absence of any nutrients besides a few salts (potassium phosphate and magnesium sulfate). It was found that productivity rates dropped by 35-65% from maximal values as nitrogenous nutrients were eliminated from the test mediums, while growth rates (as determined by shed cell density from the reactor) dropped by 75-95%. Thus, nutritional deficiencies largely decoupled growth and productivity of the immobilized yeast which suggests productivity is both growth- and non-growth-associated for the immobilized cells. A yeast extract concentration of 0.375 g/L with or without 1 g/L ammonium sulfate was determined to be the minimum level which gave a sustained increase in productivity rates as compared to the nutritionally deficient salt medium. This represents a 94% reduction in complex nitrogenous nutrient levels compared to standard YEP batch medium (3 g/L YE and 3.5 g/L peptone).     

A novel recycle batch immobilized cell bioreactor for propionate production from whey lactose

Recycle batch fermentations using immobilized cells of Propionibacterium acidipropionici were studied for propionate production from whey permeate, de-lactose whey permeate, and acid whey. Cells were immobilized in a spirally wound fibrous sheet packed in a 0.5-L column reactor, which was connected to a 5-L stirred tank batch fermentor with recirculation. The immobilized cells bioreactor served as a breeder for these recycle batch fermentations. High fermentation rates and conversions were obtained with these whey media without nutrient supplementation. It took approximately 55 h to ferment whey permeate containing approximately 45 g/L lactose to approximately 20 g/L propionic acid. Higher propionate concentrations can be produced with various concentrated whey media containing more lactose. The highest propionic acid concentration obtained with the recycle batch reactor was 65 g/L, which is much higher than the normal maximum concentration of 35 to 45 g/L reported in the literature. The volumetric productivity ranged from 0.22 g/L . h to 0.47 g/L . h, depending on the propionate concentration and whey medium used. The corresponding specific cell productivity was 0.033 to 0.07 g/L . g cell. The productivity increased to 0.68 g/L . h when whey permeate was supplemented with 1% (w/v) yeast extract. Compared with conventional batch fermentation, the recycle batch fermentation with the immobilized cell bioreactor allows faster fermentation, produces a higher concentration of product, and can be run continually without significant downtime. The process also produced similar fermentation results with nonsterile whey media. (c) 1995 John Wiley & Sons, Inc.     

初始条件对高浓度乙醇连续发酵过程的影响及振荡行为提高发酵效率的机理分析

前期实验在稀释速率为0.027h-1的高浓度乙醇连续发酵过程中,发现了一种长周期、宽振幅的参数振荡现象。本实验进一步考察了不同稀释速率下的连续发酵过程,发现在稀释速率为0.04h-1条件下,也能出现类似的振荡现象;在稀释速率为0.027h-1或0.04h-1的条件下,改变系统的初始状态可以得到振荡和稳态两种不同的发酵过程。比较振荡和稳态过程的实验数据后,发现在稀释速率为0.04h-1的条件下,与稳态过程相比,振荡过程的平均残糖浓度降低了14.8%,平均乙醇浓度提高了12.6%,平均设备生产强度提高了12.3%。进一步分析表明:与稳态过程相比,振荡过程动力学行为不仅存在滞后,而且在相同残糖和乙醇浓度条件下,所对应的平均比生长速率提高了53.8%。     

High density cell culture by membrane-based cell recycle

Enhancement of productivity of a bioprocess necessitates continuous operation of bioreactors with high biomass concentrations than are possible in conventional batch, fedbatch or continuous modes of culture. Membrane-based cell recycle has been effectively used to maintain high cell concentrations in bioreactors. This review compares membranebased cell recycle operation with other such high density cell culture systems as immobilized cell reactors and reactors with cell recycle by centrifugation or gravity sedimentation. A theoretical of production of primary and secondary metabolites in membrane-based recycle systems is presented. Operation of this type of system is discussed with examples from aerobic and anaerobic fermentations.     

Production of dextransucrase and dextran by Leuconostoc mesenteroides immobilized in calcium-alginate beads: II. Semicontinuous fed-batch fermentations

Cells of Leuconostoc mesenteroides immobilized in calcium alginate beads were used to produce dextransucrase (DS) in three sequential cycles of semicontinuous fed-batch fermentations. Each cycle consisted of a fed-batch DS production period of 24 h followed by a batch dextran production period for another 24 h. Free, suspended cells were used in only one cycle of fed-batch DS production followed by a dextran production period. It was impractically tedious to separate and reuse free cells. Increasing sucrose feed rate from 5 to 10 g/L h led to increases of the total enzymatic activity by about 88% with immobilized cells and by about 100% with free cells. In DS fed-batch semicontinuous fermentation, total enzymatic activity produced by immobilized cells was 1.35 and 1.56 times greater than that produced by free cells with respective sucrose feeding rates of 10 and 5 g/L h. These increases in enzyme productivity with immobilized cells, however, required total overall operating times three times longer (three cycles) than with free cells (one cycle). Growing the microorganism at optimum conditions for DS production also increased the dextran yield and shortened the time of conversion of sucrose to dextran, regardless of whether the cells were free or immobilized. Moreover, during three cycles of semicontinuous operation (144 h) immobilized cells produced more than three times as much dextran as free cells during one cycle (24 h).     

Enhanced product formation in continuous fermentations with microbial cell recycle*

The effect of partial recycle of microbial cells on the operation of a chemostat has been investigated for two fermentations. Stable steady states without partial cell recycle were obtained for the conversion of D -sorbitol to L -sorbose by Gluconobacter oxydans subsp. suboxydans 1916B and for the conversion of glucose to 2-ketogluconic acid by Serratia marcescens NRRL B-486. The employment of partial cell recycle dramatically increased product formation rates for both fermentations.