Ordered processing of the human immunodeficiency virus type 1 GagPol precursor is influenced by the context of the embedded viral protease

Ordered and accurate processing of the human immunodeficiency virus type 1 (HIV-1) GagPol polyprotein precursor by a virally encoded protease is an indispensable step in the appropriate assembly of infectious viral particles. The HIV-1 protease (PR) is a 99-amino-acid enzyme that is translated as part of the GagPol precursor. Previously, we have demonstrated that the initial events in precursor processing are accomplished by the PR domain within GagPol in cis, before it is released from the polyprotein. Despite the critical role that ordered processing of the precursor plays in viral replication, the forces that define the order of cleavage remain poorly understood. Using an in vitro assay in which the full-length HIV-1 GagPol is processed by the embedded PR, we examined the effect of PR context (embedded within GagPol versus the mature 99-amino-acid enzyme) on precursor processing. Our data demonstrate that the PR domain within GagPol is constrained in its ability to cleave some of the processing sites in the precursor. Further, we find that this constraint is dependent upon the presence of a proline as the initial amino acid in the embedded PR; substitution of an alanine at this position produces enhanced cleavage at additional sites when the precursor is processed by the embedded, but not the mature, PR. Overall, our data support a model in which the selection of processing sites and the order of precursor processing are defined, at least in part, by the structure of GagPol itself.     

Initial cleavage of the human immunodeficiency virus type 1 GagPol precursor by its activated protease occurs by an intramolecular mechanism

Processing of the GagPol polyprotein precursor of human immunodeficiency virus type 1 (HIV-1) is a critical step in viral assembly and replication. The HIV-1 protease (PR) is translated as part of GagPol and is both necessary and sufficient for precursor processing. The PR is active only as a dimer; enzyme activation is initiated when the PR domains in two GagPol precursors dimerize. The precise mechanism by which the PR becomes activated and the subsequent initial steps in precursor processing are not well understood. However, it is clear that processing is initiated by the PR domain that is embedded within the precursor itself. We have examined the earliest events in precursor processing using an in vitro assay in which full-length GagPol is cleaved by its embedded PR. We demonstrate that the embedded, immature PR is as much as 10,000-fold less sensitive to inhibition by an active-site PR inhibitor than is the mature, free enzyme. Further, we find that different concentrations of the active-site inhibitor are required to inhibit the processing of different cleavage sites within GagPol. Finally, our results indicate that the first cleavages carried out by the activated PR within GagPol are intramolecular. Overall, our data support a model of virus assembly in which the first cleavages occur in GagPol upstream of the PR. These intramolecular cleavages produce an extended form of PR that completes the final processing steps accompanying the final stages of particle assembly by an intermolecular mechanism.     

Synthetic HIV-2 protease cleaves the GAG precursor of HIV-1 with the same specificity as HIV-1 protease

A 99-amino acid protein having the deduced sequence of the protease from human immunodeficiency virus type 2 (HIV-2) was synthesized by the solid phase method and tested for specificity. The folded peptide catalyzes specific processing of a recombinant 43-kDa GAG precursor protein (F-16) of HIV-1. Although the protease of HIV-2 shares only 48% amino acid identity with that of HIV-1, the HIV-2 enzyme exhibits the same specificity toward the HIV-1 GAG precursor. Fragments of 34, 32, 24, 10, and 9 kDa were generated from F-16 GAG incubated with the protease. N-terminal amino acid sequence analysis of proteolytic fragments indicate that cleavage sites recognized by HIV-2 protease are identical to those of HIV-1 protease. The verified cleavage sites in F-16 GAG appear to be processed independently, as indicated by the formation of the intermediate fragments P32 and P34 in nearly equal ratios. The site nearest the amino terminus is quite conserved between the two viral GAG proteins (...VSQNY-PIVQN...in HIV-1,...KGGNY-PVQHV...in HIV-2). In contrast, the putative second site (...IPFAA-AQQKG...) of HIV-2 GAG shares minimal sequence identity with site 2 of HIV-1 GAG (...SATIM-MQRGN...). These sequence variations in the substrates suggest higher order structural features that may influence recognition by the proteases. Pepstatin A inhibits HIV-2 protease, whereas 1,10-phenanthroline and phenylmethylsulfonylfluoride do not; these results are in agreement with the finding that proteases of HIV and other retroviruses are aspartyl proteases.     

Auto-inactivation by cleavage within the dimer interface of Kaposi's sarcoma-associated herpesvirus protease.

An autolysis site of functional and structural significance has been mapped within the dimer interface of Kaposi's sarcoma-associated herpesvirus protease. Cleavage 27 residues from the C terminus of the 230 amino acid residue, 25 kDa protein was observed to cause a loss of dimerization and proteolytic activity, even though no active site moieties were lost. Gel-filtration chromatography and analytical ultracentrifugation were used to analyze the changes in oligomerization upon autolysis. The selective auto-disruption of this essential protein-protein interface by proteolytic cleavage resulted in a 60 % loss in mean residue ellipticity by circular dichroism as well as a 20 % weaker, 10 nm red-shifted intrinsic protein fluorescence emission spectrum. These apparent conformational changes induced a strict inhibition of enzymatic activity. An engineered substitution at the P1' position of this cleavage site attenuated autolysis by the enzyme and restored wild-type dimerization. In addition to retaining full proteolytic activity in a continuous fluorescence-based enzyme assay, this protease variant allowed the determination of the enzyme's dimerization dissociation constant of 1.7 (+/-0.9) microM. The structural perturbations observed in this enzyme may play a role in viral maturation, and offer general insight into the allosteric relationship between the dimer interface and active site of herpesviral proteases. The functional coupling between oligomerization and activity presented here may allow for a better understanding of such phenomena, and the design of an enzyme variant stabilized to autolysis should further the structural and mechanistic characterization of this viral protease.     

Purification and characterization of the mouse mammary tumor virus protease expressed in Escherichia coli.

The mouse mammary tumor virus (MMTV) protease gene was cloned into pGEX-2T, an Escherichia coli expression vector containing the glutathione S-transferase coding region of Schistosoma japonicum. The chimeric protein was formed by fusion of the glutathione S-transferase with a hexapeptide which contains a thrombin cleavage site, followed by the MMTV protease. Affinity chromatography on a glutathione-Sepharose 4B column was used to isolate the chimeric protein. After thrombin cleavage, the glutathione S-transferase and the protease were separated by gel filtration chromatography on a Sephadex G-75 column. The overall yield of the protease purification procedure was about 1 mg of protease/liter of culture, and the specific activity was 380 pmol/min.micrograms of enzyme. Like other retroviral proteases, the MMTV enzyme was active as a dimer, showed maximum activity at pH between 4 and 6, and could be inhibited by pepstatin A and a phosphinic acid derivative HIV-1 protease inhibitor. Enzymatic characterization of this protease reveals its broad specificity, showing a clear preference for the oligopeptide substrate mimicking the cleavage site at the amino-terminal end of the capsid protein (kcat/Km = 9725.5 M-1.s-1). The chimeric protein was also an active dimer and showed a similar Km (17 microM) for such an oligopeptide, although its kcat was about 10 times smaller. Autocatalytic processing of the MMTV protease was observed after expression of clones containing the natural cleavage site, as it occurs at the amino-terminal end of the viral protease, instead of the thrombin-sensitive sequence.     

Molecular and enzymatic characterization of the porcine endogenous retrovirus protease

The protease of the porcine endogenous retrovirus (PERV) subtypes A/B and C was recombinantly expressed in Escherichia coli as proteolytically active enzyme and characterized. The PERV Gag precursor was also recombinantly produced and used as the substrate in an in vitro enzyme assay in parallel with synthetic nonapeptide substrates designed according to cleavage site sequences identified in the PERV Gag precursor. The proteases of all PERV subtypes consist of 127 amino acid residues with an M(r) of 14,000 as revealed by determining the protease N and C termini. The PERV proteases have a high specificity for PERV substrates and do not cleave human immunodeficiency virus (HIV)-specific substrates, nor are they inhibited by specific HIV protease inhibitors. Among the known retroviral proteases, the PERV proteases resemble most closely the protease of the murine leukemia retrovirus.     

Chemical synthesis of a biotinylated derivative of the simian immunodeficiency virus protease. Purification by avidin affinity chromatography and autocatalytic activation.

The protease from simian immunodeficiency virus (SIV) was chemically synthesized by automated solid-phase technology as an NH2-terminally extended derivative, capped with biotin. Biotin-linker-(SIV protease (1-99)): the linker segment, Gly-Gly-Asp-Arg-Gly-Phe-Ala-Ala, corresponds to the amino acid sequence preceding that of the protease in the SIV gag/pol precursor polyprotein. Accordingly, the Ala-Pro bond joining the octapeptide linker to the protease constitutes a site naturally cleaved by the protease during viral maturation. This strategy for synthesis was designed to facilitate purification of the biotinylated protein derivative from a complex mixture of reaction products by avidin/agarose-affinity chromatography and to provide the means for autocatalytic removal of the biotin-linker segment. As anticipated, folding of the full-length construct leads to activation of the enzyme and excision of the desired 99-residue SIV protease (overall yield, approximately). The specificity of the synthetic SIV protease toward a number of well characterized protein substrates was the same as observed for the nearly identical enzyme from human immunodeficiency virus type 2 (HIV-2 protease) and distinct from that of the more disparate HIV-1 protease. The same functional ordering with respect to the human retroviral proteases was reflected in Ki values observed with a number of protease inhibitors. Thus, the folded synthetic SIV protease shows patterns of specificity and susceptibility to inhibition that are in accord with what would be expected based upon its degree of structural similarity to proteases from HIV-1 and HIV-2.     

Autoprocessing of HIV-1 protease is tightly coupled to protein folding.

In the Gag-Pol polyprotein of HIV-1, the 99-amino acid protease is flanked at its N-terminus by a transframe region (TFR) composed of the transframe octapeptide (TFP) and 48 amino acids of the p6pol, separated by a protease cleavage site. The intact precursor (TFP-p6pol-PR) has very low dimer stability relative to that of the mature enzyme and exhibits negligible levels of stable tertiary structure. Thus, the TFR functions by destabilizing the native structure, unlike proregions found in zymogen forms of monomeric aspartic proteases. Cleavage at the p6pol-PR site to release a free N-terminus of protease is concomitant with the appearance of enzymatic activity and formation of a stable tertiary structure that is characteristic of the mature protease as demonstrated by nuclear magnetic resonance. The release of the mature protease from the precursor can either occur in two steps at pH values of 4 to 6 or in a single step above pH 6. The mature protease forms a dimer through a four-stranded beta-sheet at the interface. Residues 1-4 of the mature protease from each subunit constitute the outer strands of the beta-sheet, and are essential for maintaining the stability of the free protease but are not a prerequisite for the formation of tertiary structure and catalytic activity. Our experimental results provide the basis for the model proposed here for the regulation of the HIV-1 protease in the viral replication cycle.     

Comparison of inhibitor binding in HIV-1 protease and in non-viral aspartic proteases: the role of the flap

The crystal structure of HIV-1 protease with an inhibitor has been compared with the structures of non-viral aspartic proteases complexed with inhibitors. In the dimeric HIV-1 protease, two 4-stranded beta-sheets are formed by half of the inhibitor, residues 27-29, and the flap from each monomer. In the monomeric non-viral enzyme the single flap does not form a beta-sheet with an inhibitor. The HIV-1 protease shows more interactions with a longer peptide inhibitor than are observed in non-viral aspartic protease-inhibitor complexes. This, and the large movement of the flaps, restricts the conformation of the protease cleavage sites in the retroviral polyprotein precursor.     

Mutational analysis of human immunodeficiency virus type 1 protease suggests functional homology with aspartic proteinases.

Processing of the retroviral gag and pol gene products is mediated by a viral protease. Bacterial expression systems have been developed which permit genetic analysis of the human immunodeficiency virus type 1 protease as measured by cleavage of the pol protein precursor. Deletion analysis of the pol reading frame locates the sequences required to encode a protein with appropriate proteolytic activity near the left end of the pol reading frame but largely outside the gag-pol overlap region, which is at the extreme left end of pol. Most missense mutations within an 11-amino-acid domain highly conserved among retroviral proteases and with sequence similarity to the active site of aspartic proteinases abolish appropriate processing, suggesting that the retrovirus proteases share a catalytic mechanism with aspartic proteinases. Substitution of the amino acids flanking the scissile bond at three of the processing sites encoded by pol demonstrates distinct sequence requirements for cleavage at these different sites. The inclusion of a charged amino acid at the processing site blocks cleavage. A subset of these substitutions also inhibits processing at the nonmutated sites.     

Narrow substrate specificity and sensitivity toward ligand-binding site mutations of human T-cell Leukemia virus type 1 protease

Human T-cell leukemia virus type 1 (HTLV-1) is associated with a number of human diseases; therefore, its protease is a potential target for chemotherapy. To compare the specificity of HTLV-1 protease with that of human immunodeficiency virus type 1 (HIV-1) protease, oligopeptides representing naturally occurring cleavage sites in various retroviruses were tested. The number of hydrolyzed peptides as well as the specificity constants suggested a substantially broader specificity of the HIV protease. Amino acid residues of HTLV-1 protease substrate-binding sites were replaced by equivalent ones of HIV-1 protease. Most of the single and multiple mutants had altered specificity and a dramatically reduced folding and catalytic capability, suggesting that mutations are not well tolerated in HTLV-1 protease. The catalytically most efficient mutant was that with the flap residues of HIV-1 protease. The inhibition profile of the mutants was also determined for five inhibitors used in clinical practice and inhibitor analogs of HTLV-1 cleavage sites. Except for indinavir, the HIV-1 protease inhibitors did not inhibit wild type and most of the mutant HTLV-1 proteases. The wild type HTLV-1 protease was inhibited by the reduced peptide bond-containing substrate analogs, whereas the mutants showed various degrees of weakened binding capability. Most interesting, the enzyme with HIV-1-like residues in the flap region was the most sensitive to the HIV-1 protease inhibitors and least sensitive to the HTLV-1 protease inhibitors, indicating that the flap plays an important role in defining the specificity differences of retroviral proteases.     

HIV-1 protease regulation: The role of the major homology region and adjacent C-terminal capsid sequences

The maturation of human immunodeficiency type-1 virions is accomplished through the proteolytic processing of Gag and GagPol precursor proteins by the viral protease (PR). Since virions must be assembled at the cell surface from uncleaved precursor molecules, intracellular activation of PR must be inhibited. We have previously developed a system where the intracellular activity of PR, associated with GagPol, was inhibited by the expression of Gagin trans. The disproportionate synthesis of Gag inhibits the activation of PR in the cytoplasm. Sequences capable of mediating this inhibition were localized to capsid. In this communication, the region of HIV-1 capsid capable of mediating inhibition was further defined and shown to require the major homology region of capsid within Gag.     

Enzymatic activity of a synthetic 99 residue protein corresponding to the putative HIV-1 protease

A protein corresponding to the putative protease of the human immunodeficiency virus 1 (HIV-1) has been prepared by total chemical synthesis. This 99 residue synthetic enzyme showed specific proteolytic activity on fragments of the natural gag precursor and on synthetic peptide substrates, two of which released fragments corresponding to the N terminus and C terminus of the protease molecule itself. The observed substrate specificity was not restricted to cleavage at Phe/Tyr-Pro bonds. Inhibition studies provided direct evidence that the HIV-1 protease belongs to the family of aspartic proteases. The availability of the HIV-1 protease as a defined molecular species has important implications for the design of specific inhibitors that do not interfere with the host cell metabolism as a possible route to antiviral agents against acquired immunodeficiency syndrome (AIDS).     

Actin, troponin C, Alzheimer amyloid precursor protein and pro-interleukin 1 beta as substrates of the protease from human immunodeficiency virus

We show here for the first time that actin, troponin C, Alzheimer amyloid precursor protein (AAP), and pro-interleukin 1 beta (pro-IL-1 beta), are substrates of the protease encoded by the human immunodeficiency virus (HIV) type-1. As has been seen in other non-viral protein substrates of the HIV protease, the presence of Glu residues in the P2' position appears to play an important role in substrate recognition. Three of the four bonds cleaved in actin, two of the three in troponin C, and all of the bonds hydrolyzed in AAP and pro-IL-1 beta have a P2' Glu residue. In fact, Glu residues are accommodated in all positions from P4 to P4' surrounding the scissile bond in substrates of the HIV proteases, and as many as 4 adjacent Glu residues were seen in one of the bonds cleaved in AAP. This study of non-viral protein substrates has also revealed unexpected amino acids such as Gly, Arg, and Glu in the scissile bond itself rather than the more conventional hydrophobic amino acids. The HIV-2 protease hydrolyzed actin in a manner similar to that of the HIV-1 enzyme, but its cleavage of troponin C was distinct in that it split a bond adjacent to a triplet of Glu residues in P2, P3, and P4 that was refractory to the HIV-1 enzyme. Documentation of cleavage sites in the several important cellular proteins noted above has extended our understanding of the features in a substrate that are recognized by these multi sub-site proteases of retroviral maturation. Moreover, the present work adds to an accumulating body of evidence which demonstrates that these enzymes can damage crucial structural and regulatory cellular proteins if ever their activity is expressed outside the viral particle itself.     

Assembly and processing of avian retroviral gag polyproteins containing linked protease dimers.

Assembly and maturation of retroviral particles requires the aggregation and controlled proteolytic cleavage of polyprotein core precursors by a precursor-encoded protease (PR). Active, mature retroviral PR is a dimer, and the accumulation of precursors at sites of assembly may facilitate subunit interaction and subsequent activation of this enzyme. In addition, it has been suggested that cellular cytoplasmic components act as inhibitors of PR activity, so that processing is delayed until the nascent virions leave this compartment and separate from the surface of host cells. To investigate the mechanisms that control PR activity during virus assembly, we studied the in vivo processing of retroviral gag precursors that contain tandemly linked PR subunits in which dimerization is concentration independent. Sequences encoding four different linked protease dimers were independently joined to the end of the Rous sarcoma virus (RSV) gag gene in a simian virus 40-based plasmid vector which expresses a myristoylated gag precursor upon transfection of COS-1 cells. Three of these plasmids produced gag precursors that were incorporated into viruslike particles and proteolytically cleaved by the dimers to mature core proteins that were indistinguishable from the processed products of wild-type gag. The amount of viral gag protein that was assembled and packaged in these transfections was inversely related to the relative proteolytic activities of the linked PR dimers. The fourth gag precursor, which contained the most active linked PR dimer, underwent rapid intracellular processing and did not form viruslike particles. In the absence of the plasma membrane targeting signal, processing of all four linked PR dimer-containing gag precursors was completed entirely within the cell. From these results, we conclude that the delay in polyprotein core precursor processing that occurs during normal virion assembly does not depend on a cytoplasmic inhibitor of PR activity. We suggest that dimer formation is not only necessary but may be sufficient for the initiation of PR-directed maturation of gag and gag-pol precursors.     

Reversible oxidative modification as a mechanism for regulating retroviral protease dimerization and activation

Human immunodeficiency virus protease activity can be regulated by reversible oxidation of a sulfur-containing amino acid at the dimer interface. We show here that oxidation of this amino acid in human immunodeficiency virus type 1 protease prevents dimer formation. Moreover, we show that human T-cell leukemia virus type 1 protease can be similarly regulated through reversible glutathionylation of its two conserved cysteine residues. Based on the known three-dimensional structures and multiple sequence alignments of retroviral proteases, it is predicted that the majority of retroviral proteases have sulfur-containing amino acids at the dimer interface. The regulation of protease activity by the modification of a sulfur-containing amino acid at the dimer interface may be a conserved mechanism among the majority of retroviruses.     

Computational proteomics analysis of HIV-1 protease interactome

HIV-1 protease is a small homodimeric enzyme that ensures maturation of HIV virions by cleaving the viral precursor Gag and Gag-Pol polyproteins into structural and functional elements. The cleavage sites in the viral polyproteins share neither sequence homology nor binding motif and the specificity of the HIV-1 protease is therefore only partially understood. Using an extensive data set collected from 16 years of HIV proteome research we have here created a general and predictive rule-based model for HIV-1 protease specificity based on rough sets. We demonstrate that HIV-1 protease specificity is much more complex than previously anticipated, which cannot be defined based solely on the amino acids at the substrate's scissile bond or by any other single substrate amino acid position only. Our results show that the combination of at least three particular amino acids is needed in the substrate for a cleavage event to occur. Only by combining and analyzing massive amounts of HIV proteome data it was possible to discover these novel and general patterns of physico-chemical substrate cleavage determinants. Our study is an example how computational biology methods can advance the understanding of the viral interactomes.     

HIV-1 protease specificity of peptide cleavage is sufficient for processing of gag and pol polyproteins

The mature proteins of retroviruses originate as a result of proteolytic cleavages of polyprotein precursors. Retroviruses encode proteases responsible for several of these processing events, making them potential antiviral drug targets. A 99-amino acid HIV-1 protease, produced by chemical synthesis or by expression in bacteria, is shown here to hydrolyze peptides corresponding to all of the known cleavage sites in the HIV-1 gag and pol polyproteins. It does not hydrolyze peptides corresponding to an env cleavage site or a distantly related retroviral gag cleavage site.     

Amino acid preferences for a critical substrate binding subsite of retroviral proteases in type 1 cleavage sites

The specificities of the proteases of 11 retroviruses representing each of the seven genera of the family Retroviridae were studied using a series of oligopeptides with amino acid substitutions in the P2 position of a naturally occurring type 1 cleavage site (Val-Ser-Gln-Asn-Tyr Pro-Ile-Val-Gln; the arrow indicates the site of cleavage) in human immunodeficiency virus type 1 (HIV-1). This position was previously found to be one of the most critical in determining the substrate specificity differences of retroviral proteases. Specificities at this position were compared for HIV-1, HIV-2, equine infectious anemia virus, avian myeloblastosis virus, Mason-Pfizer monkey virus, mouse mammary tumor virus, Moloney murine leukemia virus, human T-cell leukemia virus type 1, bovine leukemia virus, human foamy virus, and walleye dermal sarcoma virus proteases. Three types of P2 preferences were observed: a subgroup of proteases preferred small hydrophobic side chains (Ala and Cys), and another subgroup preferred large hydrophobic residues (Ile and Leu), while the protease of HIV-1 preferred an Asn residue. The specificity distinctions among the proteases correlated well with the phylogenetic tree of retroviruses prepared solely based on the protease sequences. Molecular models for all of the proteases studied were built, and they were used to interpret the results. While size complementarities appear to be the main specificity-determining features of the S2 subsite of retroviral proteases, electrostatic contributions may play a role only in the case of HIV proteases. In most cases the P2 residues of naturally occurring type 1 cleavage site sequences of the studied proteases agreed well with the observed P2 preferences.