The migratory insertion of carbon monoxide in pentamethylcyclopentadienyliridium (III) complexes. Structural effects on reactivity and mechanism for rhodium and iridium systems

The reactions of complex (C₅Me₅)Ir(Cl) (CO) (Me) (1a) with cyclohexylisocyanide and phosphines (L=CyNC, PHPh₂, PMePh₂, PMe₂Ph) give the products of alkyl migratory insertion (C₅Me₅Ir(Cl) (COMe) (L), in toluence or tetrahydrofuran at 323 K or higher temperature. The phenyl analogue (C₅Me₅)Ir(Cl)(CO)(Ph) or the iodide complexes (C₅Me₅)Ir(I) (CO) (R) (R=Me, Ph_are not reactive under the same conditions. The reaction of (C₅Me₅)Ir(Cl)(CO)(Me) with PMePh₂ and PMe₂Ph in acetonitrile yields the chloride substitution product [(C₅Me₅)Ir(CO)(L)(Me)]⁺Cl⁻. Kinetic measurements for the reactions of (C₅Me₅)Ir(Cl)(CO)(Me) in toluene are first order in the iridium complex and exhibit a saturation dependence on the incoming donors L. Analysis of the data suggests a two-step process involving (i) rapid formation of a molecular complex [(C₅Me₅)Ir(Cl)(CO)(Me), (L)], in which the structure of 1a is unperturbed within the limits of spectroscopic analysis, and (ii) rate determining methyl migration. The reaction parameters are K for the pre-equilibrium step (K = 1.5 (CyNC), 7.3 (PHPh₂), 7.1 (PMePh₂) dm³ mol⁻¹ at 323 K) and k₂ for the slow carbon---carbon bond formation (k₂ (10⁵) = 6.9 (CyNC), 1.2 (PHPh₂), 1.0 (PMePh₂) s⁻¹ at 323 K). The activation parameters for the methyl migration step in the reaction with PMePh₂ obtained between 308 and 338 K, are ΔH^≠ = 106±16 kJ mol⁻¹ and ΔS^≠ = − 14±5 J K⁻¹ mol⁻¹. The reaction of 1a with PMePh₂ proceeds at similar rates in tetrahydrofuran (K = 3.7 dm³ mol⁻¹, k₂ (10⁵) = 1.2 s⁻¹, 323 K). The crystal structure of (C₅Me₅)Ir(Cl)(COMe) (PMe₂Ph) has been determined by X-ray diffraction. C₂₀H₂₉ClOPIr: M_r = 544.1, monoclinic, P2₁/n, A = 8.084 (2), B = 9.030(2), C = 28.715 (3) Å, β = 91.41 (3)°, Z = 4, D_c = 1.71 g cm⁻³, V = 2095.5 ų, room temperatyre, Mo K, γ = 0.71069, μ = 65.55 cm⁻¹, F(000) = 1044, R = 0.037 for 2453 independent observed reflections. The complex shows a deformed tetrahedral coordination assuming the η⁵-C₅Me₅ molecular fragment as a single coordination site. The iridium-chlorine bond is staggered with respect to two adjacent C(ring)-methyl bonds, while the Ir---P and the Ir---COMe bonds are eclipsed with respect to C(ring)-methyl bonds.     

Synthesis and reactivity of five- and six-coordinate hydrido(vinyl) iridium(III) complexes

The reaction of the dihydrido iridium(III) precursor [IrH₂(Cl)(PiPr₃)₂] (5) with internal alkynes RCC(CO₂Me) (R = Me, CO₂Me) afforded the five-coordinate hydrido(vinyl) complexes [IrH(Cl){(E)-C(R)CH(CO₂Me)}(PiPr₃)₂] (6, 7), via insertion of the alkyne into one of the IrH bonds. Compounds 6 and 7 are also accessible by careful hydrogenation of the alkyne iridium(I) derivatives trans-[IrCl{RCC(CO₂Me)}(PiPr₃)₂] (9, 10), the latter being prepared from in situ generated trans-[IrCl(C₈H₁₄)(PiPr₃)₂] and RCC(CO₂Me). UV irradiation of 6 (R = CO₂Me) led to the formation of the isomer [IrH(Cl){κ²(C,O)-C(CO₂Me)CHC(OMe)O}(PiPr₃)₂] (3) having the vinyl ligand coordinated in a bidentate fashion. While 6 reacted with acetonitrile and CO to afford the six-coordinate iridium(III) compounds [IrH(Cl){(E)-C(CO₂Me)CH(CO₂Me)}(L′)(PiPr₃)₂] (11, 12), treatment of 6 with LiC₅H₅ gave the half-sandwich-type complex [(η⁵-C₅H₅)IrH{(E)-C(CO₂Me)CH(CO₂Me)}(PiPr₃)] (13) by, the loss of one PiPr₃. The reaction of 3 with CO under pressure resulted in the formation of [IrH(Cl){(Z)-C(CO₂Me)CH(CO₂Me)}(CO)(PiPr₃)₂] (14) in which, in contrast to the stereoisomer 12, the two CO₂Me substituents are trans disposed.     

Cyclometalated rhodium(III) and iridium(III) complexes containing amino acids as N,O-chelates

The synthesis of bis-cyclometalated aminocarboxylato complexes [M(α-aminocarboxylato)(ptpy)₂] (M = Rh, 3, 4, 5; M = Ir, 6, 7, 8), ptpy = 2-(p-tolyl)pyridinato; aminocarboxylato = glycinato, l-alaninato, l-prolinato) from [{M(μ-Cl)(ptpy)₂}₂] (M = Rh, 1; M = Ir, 2) is described. The molecular structure of [Ir(l-alaninato)(ptpy)₂] (7) was confirmed by a single-crystal X-ray diffraction study. Compound 7 crystallized from methanol-iso-hexane in the space group P2₁. For 7 the two diastereoisomers Δ_Ir, S_C and Λ_Ir, S_C were found crystallizing twice per unit. Absorption and emission spectra were recorded. The rhodium compounds are weak yellow-green and the iridium species strong green emitters.     

Diphosphinoazine rhodium(III) and iridium(III) octahedral complexes

Rhodium(III) and iridium(III) octahedral complexes of general formula [MCl₃{R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] (M = Rh, Ir; R = Ph, c-C₆H₁₁, Prⁱ, Bu^t; not all the combinations) were prepared either from the corresponding diphosphinoazines and RhCl₃ · 3H₂O or by the oxidation of previously reported bridging complexes [{MCl(1,2-η:5,6-η-CHCHCH₂CH₂CHCHCH₂CH₂)}₂{μ-R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] with chlorine-containing solvents. Depending on the steric properties of the ligands, complexes with facial or meridional configuration were obtained. Crystal and molecular structures of three facial and two meridional complexes were determined by X-ray diffraction. Hemilability of ligand in the complex fac-[RhCl₃{(C₆H₁₁)₂PCH₂C(Bu^t)NNC(Bu^t)CH₂P(C₆H₁₁)₂}] consisting in reversible decoordination of the phosphine donor group in the six-membered ring was observed as the first step of isomerization between fac and mer isomers.     

Bioorganometallics: First examples of cyclometalated iridium(III) complexes containing di- and tripeptide ester ligands

The synthesis of bis-cyclometalated [Ir(ptpy)₂(gly-gly-OEt)] (2, ptpy = 2-(p-tolyl)pyridinato; gly-gly-OEt = glycylglycine ethyl ester) and [Ir(ptpy)₂(gly-gly-gly-OEt)] (3, gly-gly-gly-OEt = glycylglycylglycine ethyl ester) from the reaction of [{Ir(μ-Cl)(ptpy)₂}₂] (1) with the corresponding peptide ester hydrochlorides in the presence of NaOMe is described. The molecular structure of 2 was confirmed by a single-crystal X-ray diffraction study. The compound crystallized from dichloromethane/iso-hexane in the space group P2₁/a. In the crystal packing the molecules of 2 exhibit N–H?O hydrogen bonds to the neighbor molecules to form dimeric units. The absorption and emission spectra of 2 and 3 were recorded and exhibit these compounds as strong green-emitting complexes.     

Syntheses and crystal structures of mononuclear and dinuclear (pentamethylcyclopentadienyl)iridium(III) complexes containing 2-mercaptobenzimidazole

A reaction of [Cp*IrCl₂]₂ {Cp* = η⁵-C₅(CH₃)₅} and 2-mercaptobenzimidazole (H₂bimt) in methanol in a 1:2 molar ratio gave a yellow complex of [Cp*IrCl₂(H₂bimt)]·CH₃OH (1). In compound 1 the H₂bimt acts as a monodentately S-donating (κS) ligand. A similar reaction of [Cp*IrCl₂]₂ and H₂bimt in the presence of NaOCH₃ (molar ratio of 1:2:2) gave an orange product (2) on addition of excess amount of NH₄PF₆. Compound 2 was composed of an unsymmetrical dinuclear complex cation, [(Cp*IrCl)₂(μ-Hbimt)(μ-H₂bimt)]⁺, a PF₆⁻ anion, and water molecules of crystallization. In the complex cation, H₂bimt bridges two Ir^III centers by S atom in the μ-κS:κS mode, while the monodeprotonated Hbimt⁻ ligand bridges via S and N atoms in the μ-κS:κN¹ mode.     

Oxo-rhenium(V) complexes containing bis(diphenylphosphino)ethane and catecholate ligands

Bis(diphenylphosphino)ethane (dppe) complexes of the type ReOCl(dppe)(O-O), where O-O = catecholate or tetrachlorocatecholate dianion, were prepared by reacting ReOCl₃(dppe) with the catechol ligand in the presence of NEt₃. X-ray diffraction on the tetrachlorocatecholate compound showed that the molecule adopts a distorted octahedral structure, in which the dppe ligand and the bidentate catecholate lie in the equatorial plane, perpendicular to the ORe-Cl unit. In contrast, for ReOCl(PPh₃)₂(O-O), the position trans to the ReO bond is occupied by a catecholate oxygen, whereas the two PPh₃ ligands are trans to one another in the equatorial plane. The UV-Vis absorption spectrum of ReO(OMe)(dppe)(oxalate) is similar to those of ReO(OR)X₂(dppe) compounds, showing two weak bands for the spin-allowed d-d transitions from the filled interaxial d orbital in the xy plane into the inequivalent metal d_xz and d_yz orbitals, respectively. For the catecholate complexes, the spectra are dominated by charge-transfer transitions from the HOMO π orbital of the catecholate ligand into the d_xz and d_yz orbitals. Both the singlet-singlet and the singlet-triplet transitions are generally observed. No information could be obtained on the weaker d-d transitions for the catecholate compounds.     

Benzene-1,2-dithiolate-induced assembly of reactive iridium fragments into tetranuclear octahydride complexes

The tetrametallic compound [Ir₄(μ-1,2-S₂C₆H₄)₂(μ-H)₂H₆(PⁱPr₃)₄(NCMe)] (1) has been obtained by treatment of the reactive cationic complex [IrH₂(PⁱPr₃)(NCMe)₃]BF₄ with the benzene-1,2-dithiolate anion. In the solid state, this tetrametallic compound exhibits an irregular nearly planar metal skeleton with the two dithiolate anions bridging the four metal centres from the same side of the tetrametallic plane. Even though all iridium atoms coordinate one PⁱPr₃ ligand, two bridging S atoms and, at least, two hydrides, they show different electronic and coordination environments. This unusual structure is maintained in solution, even after substitution of the labile acetonitrile ligand by other Lewis bases such as ethylene or carbon monoxide.     

Synthesis and pH-sensitive luminescence of bis-terpyridyl iridium(III) complexes incorporating pendent pyridyl groups

A series of iridium(III) bis-terpyridine complexes have been prepared which incorporate pendent pyridyl groups at the 4′-positions of one or both of the terpyridine (tpy) ligands. These include: three mutually isomeric homoleptic complexes, in which the nitrogen atom of the pendent pyridyl is para, meta or ortho to the C-C bond to the terpyridine; their heteroleptic analogues in which the second ligand is 4′-tolyl-terpyridine (ttpy); analogous complexes of the new ligand, 4′-(2,6-dimethylpyrid-4-yl)-terpyridine; and related complexes incorporating an additional phenyl ring interposed between the terpyridine and the pendent pyridyl group. All of the complexes are luminescent in air-equilibrated aqueous solution at room temperature. The homoleptic complexes display structured emission resembling that of unsubstituted [Ir(tpy)₂]³⁺, with luminescence lifetimes of around 1 μs under these conditions. The heteroleptic analogues give broader, red-shifted emission spectra, similar to that of [Ir(ttpy)₂]³⁺, indicating that emission in these complexes arises primarily from a lower-energy excited state associated with the 4′-tolyl-terpyridine ligand. A further red-shift for the complexes incorporating the additional phenyl ring suggests that the emissive state involves the more conjugated phenylpyridyl-appended ligand in these cases. The luminescence of all of the heteroleptic complexes investigated, except the meta-substituted system, is sensitive to the protonation state of the pendent pyridyl group, and the structure of the ligand can have a significant influence on both the magnitude of the response and the pH region over which it occurs.     

Tuning of emission: Synthesis, structure and photophysical properties of imidazole, oxazole and thiazole-based iridium (III) complexes

Three new iridium (III) complexes with two cyclometalated C^∧N ligands (imidazole, oxazole and thiazole-based, respectively) and one acetylacetone (acac) ancillary ligand have been synthesized and fully characterized. The structure of the thiazole-based complex has been determined by single crystal X-ray diffraction analysis. The Ir center was located in a distorted octahedral environment by three chelating ligands with the N-N in the trans and C-C in the cis configuration. By changing the hetero-atom of C^∧N ligands the order S, O and N, a marked and systematic hypsochromic shift of the maximum emission peak of the complexes was realized. The imidazole-based complex emits at a wavelength of 500 nm, which is in the blue to green region. The tuning of emission wavelengths is consistent with the variation of the energy gap estimated from electrochemistry results. An electroluminescent device using the thiazole-based complex as a dopant in the emitting layer has been fabricated. A highly efficient yellow emission with a maximum luminous efficiency of 9.8 cd/A at a current density of 24.2 mA/cm² and a maximum brightness of 7985 cd/m² at 19.6 V has been achieved.     

Oxo-rhenium(V) complexes with analogs of bis(diphenylphosphino)ethane

Compounds of the types ReOCl₃(L-L) and ReOCl₂(OEt)(L-L) with bis(diphenylphosphino)ethene (dppen) and bis(diphenylphosphino)ferrocene (dppf) were prepared by reacting the diphosphine with ReOCl₃(OPPh₃)(Me₂S). The ReOCl₃(L-L) compound with bis(diphenylarsino)ethane (dpae) was prepared similarly. Crystallographic work on ReOCl₃(dppen) and ReOCl₃(dpae) confirmed the approximate octahedral environment of the metal and the presence of a Cl ligand trans to the ReO bond. The ReOCl₂(OEt)(L-L) compounds contain a transORe-OEt unit. The visible spectra of both types of compounds include a two-component d-d absorption pattern originating from the spin-allowed excitation of a d electron from the interaxial d orbital in the equatorial plane to the empty d_xz and d_yz orbitals. For ReOCl₂(OEt)(dppf), these bands are masked by strong transitions taking place in the ferrocene moiety. The absorptions of the other systems are not greatly displaced compared to the similar dppe compounds, a small decrease in the transition energy being noted for the dpae complex.     

Oxidative addition of methyl iodide to [Rh(CO)2I]2: synthesis, structure and reactivity of neutral rhodium acetyl complexes, [Rh(CO)(NCR)(COMe)I2]2

Reaction of [Rh(CO)₂I]₂ (1) with MeI in nitrile solvents gives the neutral acetyl complexes, [Rh(CO)(NCR)(COMe)I₂]₂ (R=Me, 3a; ^tBu, 3b; vinyl, 3c; allyl, 3d). Dimeric, iodide-bridged structures have been confirmed by X-ray crystallography for 3a and 3b. The complexes are centrosymmetric with approximate octahedral geometry about each Rh centre. The iodide bridges are asymmetric, with Rh-(μ-I) trans to acetyl longer than Rh-(μ-I) trans to terminal iodide. In coordinating solvents, 3a forms mononuclear complexes, [Rh(CO)(sol)₂(COMe)I₂] (sol=MeCN, MeOH). Complex 3a reacts with pyridine to give [Rh(CO)(py)(COMe)I₂]₂ and [Rh(CO)(py)₂(COMe)I₂] and with chelating diphosphines to give [Rh(Ph₂P(CH₂)_nPPh₂)(COMe)I₂] (n=2, 3, 4). Addition of MeI to [Ir(CO)₂(NCMe)I] is two orders of magnitude slower than to [Ir(CO)₂I₂]⁻. A mechanism for the reaction of 1 with MeI in MeCN is proposed, involving initial bridge cleavage by solvent to give [Rh(CO)₂(NCMe)I] and participation of the anion [Rh(CO)₂I₂]⁻ as a reactive intermediate. The possible role of neutral Rh(III) species in the mechanism of Rh-catalysed methanol carbonylation is discussed.     

Synthesis and reactivity of gold(III) complexes containing cycloaurated iminophosphorane ligands

Transmetallation reactions of ortho-mercurated iminophosphoranes (2-ClHgC₆H₄)Ph₂PNR with [AuCl₄]⁻ gives new cycloaurated iminophosphorane complexes of gold(III) (2-Cl₂AuC₆H₄)Ph₂PNR [R = (R,S)- or (S)-CHMePh, p-C₆H₄F, ^tBu], characterised by NMR and IR spectroscopies, ESI mass spectrometry and an X-ray structure determination on the chiral derivative R = (S)-CHMePh. The chloride ligands of these complexes can be readily replaced by the chelating ligands thiosalicylate and catecholate; the resulting derivatives show markedly higher anti-tumour activity versus P388 murine leukaemia cells compared to the parent chloride complexes. Reaction of (2-Cl₂AuC₆H₄)Ph₂PNPh with PPh₃ results in displacement of a chloride ligand giving the cationic complex [(2-Cl(PPh₃)AuC₆H₄)Ph₂PNPh]⁺, indicating that the PN donor is strongly bonded to the gold centre.     

Dicarbonyliridium(I) complexes of pyridine ester ligands and their reactivity towards various electrophiles

The reaction of dimeric precursor [Ir(CO)₂Cl]₂ with two molar equivalent of the pyridine-ester ligands (L) like methyl picolinate (a), ethyl picolinate (b), methyl nicotinate (c), ethyl nicotinate (d), methyl isonicotinate (e) and ethyl isonicotinate (f) affords the tetra coordinated neutral complexes of the type [Ir(CO)₂ClL] (1a-f). The single crystal X-ray structure of 1d reveals that the Ir atom occupies the centre of an approximately square planar geometry with two CO groups cis- to each other. Intermolecular C-H?O and Ir?C interactions greatly stabilize the supramolecular structure of 1d in the solid state. The oxidative addition (OA) reactions of 1a-f with different electrophiles such as CH₃I, C₂H₅I and I₂ undergo decarbonylation of one CO group to generate the oxidized products of the type [Ir(CO)RClIL] where R = -CH₃ (2a-f); -C₂H₅ (3a-f) and [Ir(CO)ClI₂L] (4a-f). Kinetic study of the reaction of 1c-f with CH₃I indicates a first order reaction which follow the order 1d > 1c > 1f > 1e. All the synthesized complexes were characterized by elemental analyses, IR, and multinuclear NMR spectroscopy.     

Carbon-hydrogen and carbon-heteroatom bond activation using iridium(I) complexes

In this research, the B3LYP density functional and Stevens effective core potentials are used to compare carbon-hydrogen and carbon-heteroatom bond activation by an iridium(I) complex. Of particular importance is to address the kinetic (transition state) and thermodynamic (ground state) selectivity. The complex Ir(PH₃)₂(H) with CH₃-X (X=F, Cl, OH, SH, NH₂, PH₂) as the substrate has been used as a model. Good agreement in geometries is obtained between the target molecules and experimental models. The resultant products of C-H and C-X oxidative addition are Y-shaped minima (i.e., a distorted trigonal bipyramid with one acute and two obtuse angles among the equatorial ligands). Oxidative addition of the C-X bond to the substrate is exothermic for groups 16 and 17, but endothermic for group 15. A significant thermodynamic preference for C-X activation over C-H activation is observed for these Ir(I) complexes. However, analysis of the transition states for oxidative addition suggests that there is a kinetic preference for C-H activation.     

Ligand connected metal clusters. The molecular structures and solid state packing of {Ru3(CO)11}2(bis(diphenylphosphino)ethane) and {Ru3(CO)11}2(1,4-bis(diphenylphosphino)benzene)

The preparation and structural characterization of {Ru₃(CO)₁₁}₂(1,4-bis(diphenylphosphino)benzene), a modified synthesis of 1,4-bis(diphenylphosphino)benzene, and the structural characterization of {Ru₃(CO)₁₁}₂(bis(diphenylphosphino)ethane) are reported. In both compounds two metal cluster units are connected through ditertiary-phosphine ligands. Both molecules consist of centrosymmetric units in which the diphosphine ligands are largely covered by the triangular ruthenium clusters. No direct interaction between the two cluster units occurs within individual molecules. Molecular packing in the solid state is dominated by interactions between sets of carbon monoxide ligands in motifs that were previously identified in the solid state structure of the parent cluster, Ru₃(CO)₁₂.     

CO substitution and diphosphine ligand chelation in the reaction between 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and Re(2(CO)8(μ-H)(μ-η,η-C CPh)

The reaction between the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and the dirhenium compound Re₂(CO)₈(μ-H)(μ-η¹,η²-C CPh) in CH₂Cl₂ at room temperature proceeds by CO loss to give the dirhenium complex Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) (1). This new complex was characterized in solution by IR and NMR (¹H and ³¹P) spectroscopy and in the solid state by X-ray diffraction analysis. Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) crystallizes in the triclinic space group

Full-size image

γ = 69.240(6)°, V = 2024.9(3) ų, Z = 2, d_calc = 1.862 g cm⁻³ R = 0.0221, R_w = 0.243 for 4066 observed reflections. The bpcd ligand in 1 adopts a chelating mode with a linear phenylacetylide ligand being located on the adjacent rhenium center cis to the bpcd ligand. This complex represents the first structurally characterized example of a hydrido-bridged dirhenium complex possessing both a linear acetylide ligand and a chelating diphosphine ligand.     

Hydride complexes of platinum(II) containing unsymmetrical di(phosphine) ligands: synthesis, characterization and evidence for pairwise addition of hydrogen based on parahydrogen induced polarization

Unsymmetrical di(phosphine) ligands (dpp)₂Rop (1a, b = bis(diphenylphosphino)-2-alkyl-3-oxapropane (alkyl = methyl and ethyl)) and (dpp)₂oCy (1c = trans-2-diphenylphosphinocyclohexyl diphenylphosphinite) and their Pt(II) dichloride complexes, PtCl₂((dpp)₂mop) (2a), PtCl₂((dpp)₂eop) (2b) and PtCl₂((dpp)₂oCy) (2c), have been synthesized and characterized by NMR spectroscopy. The crystal structures of 2b and 2c show that the geometry about the platinum centers is square planar. In 2b, the metal and di(phosphine) ligand chelate ring are in a chair conformation, whereas in 2c, the chelate ring conformation is a skewed boat. Initial reaction of sodium borohydride with 2a, b, c yields the monohydride monochloride complexes PtHCl((dpp)₂mop) (5a), PtHCl((dpp)₂eop) (5b) and PtHCl((dpp)₂oCy) (5c). At longer reaction times, fluxional dimeric species are obtained, [PtH((dpp)₂mop)]₂ (4a), [PtH((dpp)₂eop)]₂ (4b) and [PtH((dpp)₂oCy)]₂ (4c),and in the case of 4c two different isomers exist. The dihydride complexes PtH₂((dpp)₂mop) (3a), PtH₂((dpp)₂eop) (3b) and PtH₂((dpp)₂oCy) (3c), are prepared by further reaction of NaBH₄ and 2. Hydrogen cycling is facile in the dihydride complexes 3a, b, c, and oxidative addition of H₂ proceeds in a pairwise manner as determined by the observation of parahydrogen induced polarization (PHIP) in the ¹H NMR spectra. The reductive elimination of H₂ is also shown to be concerted by reaction of dihydride complexes with D₂. Crystal data: 2b (C₃₀H₃₂Cl₆OP₂Pt), monoclinic, space group P2₁/c (No. 14), a = 13.7040(1), b = 11.3430(7), c = 21.3880(9) Å, β = 97.923(9)°, V = 3292.9(2) ų and Z = 4; 2c (C₃₀H₃₀Cl₂OP₂Pt), monoclinic, space group P2₁ (No. 4), a = 11.7360(2), b = 8.4311(2), c = 14.2789(2) Å, β = 101.290(1)°, V = 1385.52(4) ų and Z = 2.     

New iridium(I) complexes with labile ligands: reactivity and structural characterization by atmospheric pressure mass and tandem mass spectrometry

Reaction of diphosphine complexes [IrCl{(C₆F₅)₂P(CH₂)₂P(C₆F₅)₂}]₂ (I) and [IrCl(dppe)]₂ (II) with coordinating solvents (acetonitrile, acetone, DMSO) leads to several square-planar complexes of the type [IrCl(diphosphine)(solvent)] which are stable only in solution ([IrCl{(C₆F₅)₂P(CH₂)₂P(C₆F₅)₂}(NCCH₃)] (III) and [IrCl{(C₆F₅)₂P(CH₂)₂P(C₆F₅)₂}(acetone)], IV) and/or can be detected only under APCI-MS/MS conditions ([IrCl(dppe)(solvent)]). When III is allowed to react with CO for at least 30 min, the unusual five coordinated trans-dicarbonyl complex [IrCl{(C₆F₅)₂P(CH₂)₂P(C₆F₅)₂}(CO)₂] (Vb) is formed, as characterized by ¹H and ³¹P NMR, FT-IR, TGA and APCI-MS/MS.A new and stable square-planar complex [Ir(OCH₃)(cod)(PClPh₂)] (IX) was also synthesized. Its APCI-MS/MS spectrum is simple and unique as it shows exclusively the loss of a neutral C₃H₂ species. Along with the APCI-MS and APCI-MS/MS analyses, whenever it was possible all complexes were also characterized by ¹H and ³¹P NMR spectroscopy.     

Secondary ligand-metal interactions in rhodium(III) and iridium(III) phosphoramidite complexes

The synthesis, characterization, and application in asymmetric catalytic cyclopropanation of Rh(III) and Ir(III) complexes containing (S_a,R_C,R_C)-O,O′-[1,1′-binaphthyl-2,2′-diyl]-N,N′-bis[1-phenyl-ethyl]phosphoramidite (1) are reported. The X-ray structures of the half-sandwich complexes [MCl₂(C₅Me₅)(1,κP)] (M = Rh, 2a; M = Ir, 2b) show that the metal-phosphoramidite bond is significantly shorter in the Ir(III) analog. Chloride abstraction from 2a (with CF₃SO₃SiMe₃ or with CF₃SO₃Me) and from 2b (with AgSbF₆) gives the cationic species [MCl(C₅Me₅)(1,2-η-1,κP)]⁺ (M = Rh, 3a; M = Ir, 3b), which display a secondary interaction between the metal and a dangling phenethyl group (NCH(CH₃)Ph) of the phosphoramidite ligand, as indicated by NMR spectroscopic studies. Complexes 3a and 3b slowly decompose in solution. In the case of 3b, the binuclear species [Ir₂Cl₃(C₅Me₅)₂]⁺ is slowly formed, as indicated by an X-ray study. Preliminary catalytic tests showed that 3a cyclopropanates styrene with moderate yield (35%) and diastereoselectivity (70:30 trans:cis ratio) and with 32% ee (for the trans isomer).