Investigations in high-precision sorting.

We have investigated the accuracy with which droplets containing cells can be sorted individually onto known and thus relocatable positions. The presence and random arrival of cells and particles in the sorter jet disturbs the orderly production and deflection of droplets, causing a dispersion of sorted droplet trajectories. The magnitude of this dispersion is a function of the phase relationship between the arrival of a cell at the end of the jet and the droplet formation. Using a modified Becton Dickinson Fluorescence-Activated Cell Sorter, we selected for sorting only those droplets that formed with a cell near the center of the droplet. We used this technique to sort Lewis lung tumor cells. The dispersion of droplet positions was reduced from over 3% to about 1% of an average deflection of typically 15 mm for a nozzle with a 50-micron diameter orifice. Sorting onto a surface such as magnetic tape or a microscope slide introduces another uncertainty in position because the cell may be located anywhere within the wetted radius of the droplet on the slide. Sorting onto less-wettable surfaces reduces the wetted radius and thus the variation in cell position.     

Electrostatic encapsulation and growth of plant cell cultures in alginate.

The growth of callus tissue from African Violets, encapsulated in alginate using electrostatics, was investigated as well as the mechanism of alginate droplet formation. Alginate microbeads as small as 500 (+/-50) microns in diameter could be produced by electrostatic extrusion directly from a plastic syringe (1900 micron extrusion orifice), in the absence of a needle. Video analysis of the mechanism of electrostatic alginate droplet formation from the syringe showed the development of a Taylor cone-like droplet which extended to form a thin strand that then broke up into droplets. Autoclaving of the alginate/medium solution significantly reduced its viscosity, giving smaller beads. Calculated microbead diameters agreed well with experimental values. Callus tissue from leaf explants was successfully immobilized and cultured using electrostatic extrusion. Tissue immobilized using 4% alginate in medium and cultured on agar grew best, producing a complete plantlet within four months. The long-term aim is to develop an effective method for large production of artificial seeds.     

Migration,clogging, and carbon source release of nano emulsified vegetable oil in porous media,evaluated by column experiments

To effectively solve the problem of aquifer clogging in the process of in situ bioremediation of groundwater pollution by micron emulsified vegetable oil (Micron EVO), Nano emulsified vegetable oil (Nano EVO) was prepared to replace conventional micron EVO, and three one-dimensional laboratory columns packed with medium or fine sands were conducted to simulate migration, clogging, and carbon source release of EVO in porous media. Column experiment results show that micron and nano EVO resulted in a 20.40% and 3.20% reduction in permeability of medium sand, respectively. Correspondingly, the interception of micron and nano EVO in medium sand were 28.51% and 20.15%, respectively. Obviously, EVO interception is an important reason for permeability loss, and reducing EVO droplet size can effectively alleviate permeability loss in porous media. The COD ratios (dissolved COD/total COD) of micron and nano EVO in medium sand were 87.61% and 61.95%, respectively. The release effect of nano EVO was better than that of micron EVO. Effective longevity of micron and nano EVO were 243.17 d and 98.80 d, respectively. The effect of fine sand media on EVO indicated nano EVO can be used in a finer granular media, and its longevity can also be extended in this media.     

Calibration of beam deflection produced by cellular forces in the 10(-9)--10(-6) gram range

An experimental procedure and method of analysis are presented for calibration of a thin-beam force transducer. The beam transducer can be produced and calibrated with a minimum coefficient of 10 ng (10(-5) dyne) force per micron (10(-4) cm) deflection, i.e., kB approximately 0.1 dyne/cm. Since beam deflections on the order of 0.1 micron can be detected, forces of a few nanograms can be resolved. Such forces are common in mechanical experiments on microscopic bodies, e.g., biological cells, artificial membrane capsules, droplets, etc.     

Factors governing the flow cytometric analysis and sorting of large biological particles

We have investigated the suitability of large flow cell tips for the flow cytometric analysis and sorting of large biological particles, including plant cells (pollen) and protoplasts. Using flow tips ranging in diameter from 79-204 micron, we have optimized conditions for the establishment of a stable hydrodynamic flow leading to accurate droplet production. We describe instrument modifications required for large particle sorting and demonstrate the use of these experimental conditions for the sorting to high purity of pollen and viable plant protoplasts possessing diameters as large as 95 micron. Our experiments have revealed a complex interaction among sorting efficiency, particle diameter, flow cell tip diameter and bimorphic crystal drive frequency. This interaction can be satisfactorily explained in terms of interference effects owing to phase differences between the particle-induced disturbance and the undulation driven by the bimorphic crystal.     

Paracrystalline inclusions in various isolates of the blue-green bacteria Nostoc and Anabaena.

A number of different crystalline inclusions were observed in various isolates of Anabaena and Nostoc. Membrane-limited crystalline bodies were observed in 7 of 20 isolates of Anabaena and 19 of 29 isolates of Nostoc. These are spherical, single membrane-limited bodies from 0.6 to 0.1 micron in diameter. In most of the isolates they contained needle-like crystals 20 A in thickness and up to 80 nm in length. In 9 of the isolates the inclusions contained granular and fibrillar material. The number of bodies per cell varied in the different isolates from only a few, observed in many sections, up to 5 in a single section of A. subtropica (B1618). Crystalloids were observed in the cytoplasm of Anabaena sp. (1551), N. calcicola (B382), Nostoc sp. (588), and N. punctiforme (1629). In Anabaena sp. (1551) the roughly cuboidal inclusions 0.6 micron in diameter were composed of 100 A thick osmiophilic striations spaced to produce a 150 A periodicity. In Nostoc sp. (588) the elongate, 0.1 micron by 2.5 micron, crystalloids were composed of 100 A thick osmiophilic striations spaced to produce a 200 A periodicity. N. punctiforme (1629) and N. calciola (B382) contained intrathylakoidal crystalloids which consisted of short curved segments with 100 A thick osmiophilic striations producing a 200 A periodicity. Granular areas were observed in 2 isolates of Anabaena and 5 of Nostoc. These bodies found in various locations in the cells, were interpreted to be elongate structures 0.2 micron thick, 1.2 micron long and about 5 micron in depth. These inclusions were composed of 15 nm diameter granules which in some section planes appeared in rows spaced 20 nm apart. Spherical bodies up to 0.7 micron in diameter and of medium electron density were observed in 4 isolates of Anabaena and 2 of Nostoc. Convoluted inclusions were found in N. calcicola (B382) and Anabaena sp. (1551). These roughly spherical bodies up to 0.8 micron in diameter contain lighter swirled areas.     

Local measurements of viscoelastic parameters of adherent cell surfaces by magnetic bead microrheometry.

A magnetic bead microrheometer has been designed which allows the generation of forces up to 10(4) pN on 4.5 micron paramagnetic beads. It is applied to measure local viscoelastic properties of the surface of adhering fibroblasts. Creep response and relaxation curves evoked by tangential force pulses of 500-2500 pN (and approximately 1 s duration) on the magnetic beads fixed to the integrin receptors of the cell membrane are recorded by particle tracking. Linear three-phasic creep responses consisting of an elastic deflection, a stress relaxation, and a viscous flow are established. The viscoelastic response curves are analyzed in terms of a series arrangement of a dashpot and a Voigt body, which allows characterization of the viscoelastic behavior of the adhering cell surface in terms of three parameters: an effective elastic constant, a viscosity, and a relaxation time. The displacement field generated by the local tangential forces on the cell surface is visualized by observing the induced motion of assemblies of nonmagnetic colloidal probes fixed to the membrane. It is found that the displacement field decays rapidly with the distance from the magnetic bead. A cutoff radius of Rc approximately 7 micron of the screened elastic field is established. Partial penetration of the shear field into the cytoplasm is established by observing the induced deflection of intracellular compartments. The cell membrane was modeled as a thin elastic plate of shear modulus mu * coupled to a viscoelastic layer, which is fixed to a solid support on the opposite side; the former accounts for the membrane/actin cortex, and the latter for the contribution of the cytoskeleton to the deformation of the cell envelope. It is characterized by the coupling constant chi characterizing the elasticity of the cytoskeleton. The coupling constant chi and the surface shear modulus mu * are obtained from the measured displacements of the magnetic and nonmagnetic beads. By analyzing the experimental data in terms of this model a surface shear modulus of mu * approximately 2 . 10(-3) Pa m to 4 . 10(-3) Pa m is found. By assuming an approximate plate thickness of 0.1 micron one estimates an average bulk shear modulus of mu approximately (2 / 4) . 10(-4) Pa, which is in reasonable agreement with data obtained by atomic force microscopy. The viscosity of the dashpot is related to the apparent viscosity of the cytoplasm, which is obtained by assuming that the top membrane is coupled to the bottom (fixed) membrane by a viscous medium. By application of the theory of diffusion of membrane proteins in supported membranes we find a coefficient of friction of bc approximately 2 . 10(9) Pa s/m corresponding to a cytoplasmic viscosity of 2 . 10(3) Pa s.     

Platelet-derived growth factor: morphologic and biochemical studies of binding, internalization, and degradation

Kinetic studies of binding and internalization of 125I-platelet-derived growth factor (PDGF) demonstrate that up to 15% of membrane-associated radioactivity is internalized within 2 minutes after warming to 37 degrees C in a variety of cell types. The T 1/2 for internalization is approximately 20 minutes. The T 1/2 for the subsequent appearance of degradation products in the culture medium is between 60-90 minutes following initiation of internalization. Internalization and lysosomal association of 125I-PDGF were confirmed by EM autoradiography. Quantitative studies using PDGF adsorbed to colloidal gold (gold-PDGF) demonstrate that 17% of the cell-associated sites are along coated regions of the plasma membrane (1.0 sites/micron), while 82% are associated with noncoated membrane (0.2 sites/micron). There is a significant redistribution of the gold-PDGF complexes upon warming. Within 1-2 minutes at 37 degrees C, gold particles are found within endocytic vesicles, endosomes (0.09-0.3 micron diameter), and lysosomes (greater than 0.2 micron diameter). At this time the vesicle/endosome compartment comprises 15% of the total sites and contains 0.9 sites per micron2 of surface area. The lysosomes account for 8% of the total sites and contain 0.8 sites per micron2 of surface area. Simultaneously, there is an increase in the number of gold-PDGF binding sites within coated-pits (1.6 sites/micron, 18% of the total sites) and a decrease along noncoated regions of the membrane (0.11 sites/micron, 58% of the total sites). After 15 minutes at 37 degrees C, 26% of the total sites (1.4 sites/micron2) are highly concentrated within lysosomes, while sites in the vesicle/endosome compartment remain constant. At the same time, binding sites within coated pits decrease substantially (0.5 sites/micron, 4% of the total sites), while the number of sites along noncoated regions of the membrane remain constant. Gold-PDGF was not observed associated with the Golgi complex at any time up to 120 minutes following warming. We conclude that gold-PDGF is processed via both receptor-mediated and nonspecific endocytosis and follows an intracellular pathway comparable to that followed by some other protein ligands.     

Hand-to-hand transmission of herpes simplex virus type 1

Droplets of tissue culture fluid containing herpes simplex virus type 1 were placed on the palm of the hand. Each 0.01 ml droplet was taken from a stock virus suspension with a titre of 10(7.5) TCID50/0.1 ml. At 0, 15, 30, 60 and 120 min a droplet was firmly touched with the middle finger of the right hand, after which, attempts were made to recover virus from the finger. At 0 min, when the virus-containing droplet was in a liquid state, there was a 100% rate of virus recovery. By 15 min the droplets had dried out, and after touching dried out droplets there was a 40% virus recovery rate, even though experimental procedures demonstrated that infectious virus was present in the dried out droplets at all test times. If the finger was moistened with tap water or saliva, there was a 100% recovery rate of virus after touching dried out droplets, as well as after touching droplets in a liquid state.     

Serum bile acid determination for assessment of hepatic injury in the woodchuck

A direct spectrophotometric assay for determination of the serum bile acid concentration in the woodchuck (Marmota monax) has been validated. The assay relies on the conversion of 3-hydroxy bile acids to 3-oxo bile acids by 3 alpha-hydroxysteroid dehydrogenase with concomitant reduction of NAD+ to NADH. Reduction of NAD+ is coupled via a diaphorase catalyst to the formation of a diformazan dye from nitrotetrazolium blue and the diformazan product is measured spectrophotometrically at 540 nm. Interfering endogenous dehydrogenase activity present in woodchuck sera was inactivated with sodium pyruvate. Mean recovery of seven exogenous bile acids added to woodchuck sera was 102.0 +/- 2.2%. Intra-assay precision was determined with ten replicate samples giving a mean +/- standard error of the mean of 1.94 +/- 0.12 micron/L with a coefficient of variation of 3.9%. The mean serum bile acid concentration determined in 33 clinically healthy animals was 5.52 +/- 0.81 micron/L. The serum bile acid concentration increased following surgical ligation of the bile duct from 3.78 +/- 0.58 micron/L to a maximum value of 148.0 +/- 30.7 micron/L and remained increased for the 42 day study period. In woodchucks treated with carbon tetrachloride, the serum bile acid concentration peaked at 16 hours following treatment at 72.7 +/- 29.3 micron/L, and returned to pretreatment concentration within 6 days. The serum bile acid concentration therefore appears to be a sensitive biochemical test of cholestasis and hepatocellular forms of hepatic injury and of potential value in the clinical assessment of hepatic disease associated with woodchuck hepatitis virus infection.     

Measurements of the force produced by the mitotic spindle in anaphase

The force the spindle exerts on a single moving chromosome in anaphase was measured with a flexible glass needle calibrated in dynes per micron of tip deflection. The needle was used to produce a force on the chromosome, which opposed that produced by the spindle and was measurable from needle tip deflection. The measurements were made in intact grasshopper spermatocytes after proving that the presence of materials such as the cell surface did not interfere. The results from 12 experiments in seven cells are as follows: Chromosome velocity was not affected until the opposing force reached approximately 10(-5) dyn, and then fell rapidly with increasing force. The opposing force that caused chromosome velocity to fall to zero--the force that matched the maximum force the spindle could produce--was of order 7 X 10(-5) dyn. This directly measured maximum force potential is nearly 10,000 times greater than the calculated value of 10(-8) dyn for normal chromosome movement, in which only viscous resistance to movement must be overcome. The spindle's unexpectedly large force potential prompts a fresh look at molecular models for the mitotic motor, at velocity- limiting governors, and at the possibility that force may sometimes affect microtubule length and stability.     

Two new species of coccidia, Eimeria leucuri and E. oreoecetes (Protozoa: Eimeriidae), in grouse from Colorado.

Eimeria leucuri is described from white-tailed ptarmigan (Lagopus leucurus), and E. oreoecetes from white-tailed ptarmigan and blue grouse (Dendragapus obscurus) from Colorado. Oocysts of E. leucuri are ellipsoidal, 26.6 by 17.7 micron, each bearing a micropyle, micropyle cap, up to 4 polar granules, but no oocyst residuum. The lemon-shaped sporocysts are 15.4 by 6.7 micron, and have Stieda bodies and large amounts of sporocyst residuum. The sporocyst contents are enclosed in a membrane. Oocysts of E. oreoecetes are subspherical, 26.0 by 22.6 micron, and have up to 4 polar granules. The lemon-shaped sporocysts are 14.6 by 8.8 micron, and have both Stieda bodies and substiedal bodies and a large amount of sporocyst residuum. The sporocyst contents are enclosed in a membrane. These are the first coccidia to be described from these tetraonids.     

Steroidogenic capacity and ultrastructural morphology of cultured ovine luteal cells

Corpora lutea were surgically collected from superovulated ewes 36 h post-injection of human chorionic gonadotropin (hCG) (Day 2), dissociated (0.2% collagenase), plated, and maintained in culture Days 2-10 in Medium 199 supplemented with 5% calf serum. Accumulation of progesterone in the cultures did not decrease (p greater than 0.05) from Day 3 (17.5 +/- 5.1 nmol/10(6) cells) to Day 10 (4.8 +/- 1.7 nmol/10(6) cells). Calf serum (5%) in the medium supported greater (p less than 0.05) progesterone production than fetal calf serum (5%) or medium without added serum. Steroidogenic cells did not increase (Days 2-10) in numbers, but increased (p less than 0.01) in mean cell diameter (Day 2, 11.7 +/- 0.4 micron; Day 10, 24.5 +/- 1.6 micron). Steroidogenic capacity on Day 10 of cells cultured Days 2-10 (in vitro) was not different (p greater than 0.05) from that of cells collected from the ovary on Day 10 (in vivo); however, steroidogenic cells recovered from plates had greater (p less than 0.01) mean cell diameters (24.5 +/- 1.6 micron, in vitro, compared to 15.2 +/- 1.0 micron, in vivo). Transmission electron microscopy revealed that cultured cells (Days 5, 10) possessed less smooth endoplasmic reticulum but more lipid droplet inclusions, ribosomes, and rough endoplasmic reticulum than cells obtained in situ (Day 10). Electron-dense secretory granules were rarely seen. Although subcellular morphology of ovine luteal cells in culture was altered, these changes did not appear to significantly affect the ability of these cells to produce progesterone.     

Scanning electron microscopy of the vitelline membrane of the hen ovum

Manual removal of the perivitelline layer overlying the animal pole (AP) reveals three morphologically distinct regions of the vitelline membrane (VM). (1) The central germinal region is 600-800 micron in diameter and is densely populated with pleomorphic microvillous projections. (2) The periblastic region, which also exhibits microvillous projections, is 250-550 micron wide and consists of numerous (80-120) lacunae that are 10-60 micron in diameter and up to 20 micron in depth. (3) At the outer periblastic region, the microvillous projections are less numerous. In the vegetal hemisphere, the VM has few projections and occasionally is discontinuous.     

Reversible shift between two states of Ca2+-ATPase in human erythrocytes mediated by Ca2+ and a membrane-bound activator.

The (Ca2+ + Mg2+)-dependent ATPase (ATP phosphohydrolase, EC 3.6.1.3) from human erythrocytes occurred in two different states, A-state and B-state, depending on the membrane preparation. The A-state showed low maximum activity (V) and the Ca2+ activation was characterized by a Hill coefficient, nH, of about 1 and a Michaelis constant, KCa, about 30 micron. The B-state showed high V, a nH above 1, which indicates positive cooperativity of Ca2+ activation, and KCa of about 1 micron. With varying ATP concentrations, both the A-state and B-state showed negative cooperativity and slightly different values of Km. The B-state was shifted to A-state when the membranes were exposed to low Ca2+ concentration. The shift reached 50% at approx. 0.5 micron Ca2+. At the low Ca2+ concentrations an activator was released from the membranes. The A-state was shifted to the B-state when the membranes were exposed to Ca2+ in the presence of the activator. The shift reached 50% at about 30 micron Ca2+. The recovery of high V was time dependent and lasted several minutes. Increasing concentrations of Ca2+ and activator accelerated the recovery. It is suggested that the A-state and the B-state correspond to enzyme free of activator and enzyme associated with activator, respectively. Furthermore, the two states may respresent a resting and an active state, respectively, of the calcium pump.     

Cell types within the medial forebrain bundle: a Golgi study of preoptic and hypothalamic neurons in the rat

The morphology of lateral preoptic (POL) and lateral hypothalamic (HLA) neurons was studied in 14- to 200-day-old rats with the chlorate-formaldehyde modification of the Golgi method. Drawings of 91 POL and HLA neurons revealed three distinct neuronal types within the MFB based on somatic size and shape and dendritic morphology. Class I neurons, which accounted for 75-80% of the neurons in the MFB, has fusiform or multipolar somata averaging 21 X 14 micron and 2-5 sparsely branched dendrites with a moderate number of sticklike spines. The extensive dendritic domains of Class I neurons ranged from 700 to 1,500 micron and were usually oriented perpendicular to the longitudinal fibers of the MFB. Both nonoriented and oriented Class I neurons were encountered. Nonoriented Class I neurons had expansive dendritic arbors which reached nearly all regions of the MFB in the coronal plane. Oriented Class I neurons had dendritic domains which were confined to specific regions (e.g., ventral-lateral) of the MFB. Class II neurons, which made up approximately 10% of the MFB neurons, had large multipolar somata averaging 30 X 17 micron and 2-5 stout dendrites which were densely covered with hairlike spines. Class II neurons also exhibited spines on their somata and proximal dendritic trunks and had dendritic domains of 700-1,000 micron. Class III neurons had small somata averaging 15 X 12 micron and restricted dendritic arbors of 500-700 micron in diameter. Class III neurons exhibited both spiny and spine-free dendrites and made up 10% of MFB neurons. Because of the parcellation of chemically coded fiber systems within the MFB, individual POL and HLA neurons may not be homogeneous in the type of afferents they receive from other brain areas.     

Sarcocystis fayeri sp. n. from the horse.

Hearts, diaphragms, esophagi, and spinal cords from 266 horses were obtained at slaughter in Creston, Ohio. Tissues were examined microscopically for Sarcocystis in sections, digested in trypsin to obtain bradyzoites, and fed to 10 dogs and 10 cats. Intramuscular cysts were found in selections of two hearts from 57 horses and four esophagi from 107 horses. The cysts were up to 900 micron long and up to 70 micron wide. The cyst wall was 1 to 2 micron thick and cross-striated. The enclosed bradyzoites were banana-shaped, 15 to 20 by 20 to 3 micron, and contained several PAS-positive granules. Bradyzoites were found in trypsin digests of seven of 57 (13%) equine tissues (heart, diaphragm, esophagus but not spinal cord) in one experiment and 10 of 47 (21%) esophagi, eight of 47 (17%) diaphragms but none of 47 hearts and spinal cords in another experiment. All of 10 dogs shed sporulated sporocysts or oocysts in feces 12 to 15 days (12 in one, 13 in eight, and 15 days in one) after digesting tissues from 169 horses. The sporocysts were 11 to 13 (12.0 +/- 0.5) by 7 to 8.5 (7.9 +/- 0.5) micron. In histologic sections of canine small intestine the sporocysts were located in the lamina propria near the tips of the villi. The 10 cats fed tissues from 266 horses did not shed Sarcocystis. A new name, S. fayeri, is proposed for this organism. Sarcocystis fayeri sporocysts (12 by 8 micron) are shorter than those of S. betrami (15 by 10 micron), the other species of Sarcocystis from the horse. The prepatent period is 12 to 15 days for S. fayeri and 8 days for S. bertrami (synonym S. equicanis Rommel and Geisel 1975).     

Emulsifier of Arthrobacter RAG-1: isolation and emulsifying properties.

The oil-degrading Arthrobacter sp. RAG-1 produced an extracellular nondialyzable emulsifying agent when grown on hexadecane, ethanol, or acetate medium. The emulsifier was prepared by two procedures: (i) heptane extraction of the cell-free culture medium and (ii) precipitation with ammonium sulfate. A convenient assay was developed for measurement of emulsifier concentrations between 3 and 75 micrograms/ml. The rate of emulsion fromation was proportional to both hydrocarbon and emulsifier concentrations. Above pH 6, activity was dependent upon divalent cations; half-maximum activity was obtained in the presence of 1.5 mM Mg2+. With a ratio of gas oil to emulsifier of 50, stable emulsions were formed with average droplet sizes of less than 1 micron. Emulsifier production was parallel to growth on either hydrocarbon or nonhydrocarbon substrates during the exponential phase; however, production continued after growth ceased.     

Emulsifier of Arthrobacter RAG-1: isolation and emulsifying properties.

The oil-degrading Arthrobacter sp. RAG-1 produced an extracellular nondialyzable emulsifying agent when grown on hexadecane, ethanol, or acetate medium. The emulsifier was prepared by two procedures: (i) heptane extraction of the cell-free culture medium and (ii) precipitation with ammonium sulfate. A convenient assay was developed for measurement of emulsifier concentrations between 3 and 75 micrograms/ml. The rate of emulsion fromation was proportional to both hydrocarbon and emulsifier concentrations. Above pH 6, activity was dependent upon divalent cations; half-maximum activity was obtained in the presence of 1.5 mM Mg2+. With a ratio of gas oil to emulsifier of 50, stable emulsions were formed with average droplet sizes of less than 1 micron. Emulsifier production was parallel to growth on either hydrocarbon or nonhydrocarbon substrates during the exponential phase; however, production continued after growth ceased.