DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.     

Molecular-genetic organization of plasmid R89S of the incompatibility group Q

A new IncQ plasmid R89S has been analysed by molecular-genetic methods. A restriction map of this plasmid has been constructed and regions of homology with the plasmid RSF1010 have been identified. A genetic map of the plasmid R89S has been prepared based on the deletion and insertion plasmid derivatives. The phenotypic analysis of the derivatives has identified the location of genes coding for replication, incompatibility, mobilization for genetic transfer and resistance to streptomycin in the genome of R89S.     

Restriction endonuclease mapping of the HI2 incompatibility group plasmid R478.

A restriction map of the 272-kb IncHI2 plasmid R478 was constructed by using the enzymes ApaI, XbaI, SalI, and XhoI. The map was derived from cloned restriction fragments from R478 inserted into cosmid and plasmid vectors as well as from double-digestion analysis of R478 and R478 miniplasmids. All previously known resistance determinants were cloned from R478, and their positions were located on the restriction map. A region involved in incompatibility was cloned and mapped. The location of a previously unreported arsenite resistance gene was also determined. The genes encoding tellurite resistance, colicin B resistance, and phage inhibition were found to be associated with a 6.7-kb SalI fragment of R478.     

Mapping of transfer regions within incompatibility group HI plasmid R27.

Plasmids of incompatibility group HI are large (greater than 150 kilobases [kb]) and possess an unusual thermosensitive mode of conjugative transfer. R27, the prototype IncHi1 plasmid, encodes resistance to tetracycline via a determinant which is related to transposon Tn10. A restriction endonuclease map of R27 (size, 182 kb) was recently constructed with ApaI, PstI, and XbaI. Transfer genes within R27 were mapped by insertion of Tn5 and Tn7. At least two different regions of the plasmid were concerned with transfer functions. Insertions into either region completely abolished transfer. None of the insertions had any effect on entry exclusion (Eex) of other IncH plasmids. However, a deletion mutant which lacked the Eex function was obtained, allowing us to map the probable site of the gene encoding Eex to one of the two transfer regions. The tetracycline resistance determinant in R27 was located within an 8-kb region between the two main transfer regions. The transfer genes, therefore, are not located together in R27 but are situated in at least two major widely separated transfer regions.     

A method of plasmid classification by integrative incompatibility

A method of plasmid classification by integrative incompatibility has been developed. The characteristics of this system are as follows: (i) The conventional plasmids usually used as standards for incompatibility grouping were integrated into the host chromosome to increase stability and to minimize recombination with the superinfecting plasmid. Strains were constructed by integrative suppression which was in some cases facilitated by the introduction of Tn5 into the plasmid. (ii) The resulting Hfr strains were made deficient in the rec A function to eliminate homologous recombination between the resident and the superinfecting plasmids. A test plasmid is introduced into these rec A Hfr test strains in the stationary phase of growth. In an incompatible cross, the number of transconjugant colonies was usually less than 10^?2 of that in a compatible cross. Occasionally, an inhibitory mechanism, other than incompatibility was coded by the resident plasmid [e.g., restriction in R124 (inc FIV)]. This complicated the interpretation, but did not invalidate the experiment. The colonies arising in incompatible crosses were shown to carry drug resistance determinants coded by both the resident and superinfecting plasmids. These were presumably the result of rec-independent integration of all or part of the superinfecting plasmid into the host chromosome. Thus the reduced frequency of superinfectant formation in an incompatible cross is usually the consequence of incompatibility between the resident and the superinfecting plasmids. This integrative incompatibility system should be useful for epidemiological studies of R plasmids.     

Structural-functional organization of the incompatibility group P plasmid pBS221

Plasmid pBS221 was physically mapped for restriction endonucleases EcoRI, BamHI, BglII, HindIII. The regions essential for the plasmid existence and participating in replication (oriV trfA*) and mobilization (mob) were cloned. The tet determinant and oriV trfA* regions were localized on the physical map of the plasmid. A DNA sequence homologous to genes of Tn501 mer operon was detected in this plasmid. The studies on homology of plasmids RP4 (IncP alpha), R751 (IncP beta) and pBS221 plasmid suggest that the latter belongs to the IncP beta subgroup.     

A novel method for rapid isolation of plasmid DNA

A new disposable chromatographic column, pZ523, has been developed for separating plasmid DNA from bacterial chromosomal DNA. Use of pZ523 spun columns eliminates the need for ethidium bromide-cesium chloride density gradients which require long centrifugation times. pZ523 purified plasmids have been shown to be of purity suitable for restriction analysis, ligation, transfection of mammalian cells and transformation of bacteria. Unlike the traditional ultracentrifugation method, pZ523 offers an extremely rapid alternative method for purifying large amounts of plasmid DNA (2.5 mg to 4.5 mg) from cleared bacterial lysates in only 25 minutes.     

Transfer-defective and tetracycline-sensitive mutants of the incompatibility group HI plasmid R27 generated by insertion of transposon 7

Transposon Tn7 insertion was used to obtain either transfer-defective (Tra-) or tetracycline-sensitive (Tc-) mutants of the HI incompatibility group (IncHI) plasmid R27. The 600 apparent R27::Tn7 derivatives fell into three classes: Tra-, Tc-, and Tra- Tc-. Mutants of R27 defective in the thermosensitive mode of transfer characteristic of IncH plasmids were obtained with transfer frequencies of less than 1 X 10(-8) transconjugants per recipient after 18 hr at 26 degrees C. These mutants, which were generated at a frequency of 1 per 100 insertions, were nonleaky and nonrevertible. Tc- mutants of R27, generated at a frequency of 0.5 per 100 insertions, were also nonrevertible. Loss of tetracycline resistance was associated with an increased frequency of transfer (average 3.6 X 10(-3) transconjugants per donor per hour at 30 degrees C) compared with transfer of the wild-type R27 plasmid (1.6 X 10(-8) per donor per hour). Tn7 insertions which generated Tc- or Tra- mutants of R27 had no effect on entry exclusion of other H group plasmids. The molecular weights of Tra- and Tc- R27::Tn7 derivatives were approximately 120.5 MDa, corresponding to the sum of R27 (112 MDa) and Tn7 (8.5 MDa). A third class of Tn7 insertion derivatives (Tra- Tc-) was obtained; however, strains expressing this phenotype were plasmid free, and appeared to have Tn7 integrated at a chromosomal site. Restriction digestion with XbaI and subsequent hybridization with ColE1::Tn7 were used to compare R27::Tn7 derivatives and to locate Tn7 insertion sites. Loss of tetracycline resistance was associated with Tn7 insertion into a 24-kb XbaI fragment of R27. Although loss of plasmid transfer in several R27::Tn7 derivatives was accompanied by insertion of Tn7 into a 14-kb XbaI fragment of the plasmid, these mutants had also undergone a small increase in the size of the 24-kb XbaI fragment of R27.     

A rapid electrophoretic method for the measurement of plasmid copy number

A rapid and inexpensive method for the measurement of copy number of small plasmids, ranging from 8.7 to 13 kb, in under 1 ml of liquid culture is described. The method involves whole cell lysis, electrophoretic separation of plasmid and chromosomal DNA followed by relative densitometric measurement of each, to give an estimation of the plasmid copies per chromosome. Results can be obtained in under 8 h and the method proved to be reproducible, fast and ideal for processing large numbers of samples from batch or continuous culture.     

A rapid method for determining the relationship between cDNA clones

We describe a technique for rapidly screening the inserts of plasmids for homology to each other by using DNA fragments isolated in agarose gels to probe Southern blots of DNA prepared by the "miniprep" alkaline lysis method. The procedure includes a technique for labeling DNA fragments in agarose gel slices without further purification. The protocol results in a significant savings in time and expense and a considerable increase in fragment yield over methods involving fragment purification from polyacrylamide or agarose gels.     

A rapid method for the isolation of plasmid DNA from bacteria

Summary A rapid method is described for the isolation of plasmid DNA from Escherichia coli and Pseudomonas putida. The effect of heating the cell preparation during plasmid extraction is discussed in relationship to the final plasmid yield.     

A rapid method for determining the fatty acid composition of lipid A

Lipid A is the most conservative part of LPS. Its fatty acids composition can serve as an important taxonomic marker of bacteria. The isolation of LPS and studying their chemical composition are difficult and protracted procedure. We propose the rapid method of determining the prevailed fatty acids of lipid A without isolation of LPS from the cell. The essence of the method is in the release of cell from the lipids which are not components of LPS. These lipids, in contrast to the lipid A, are more easily extractable from the cell structures. The fatty acids, which prevailed in the lipid-free cells, are the structural components of lipid A.     

A rapid method for determining protein kinase phosphorylation specificity

Selection of target substrates by protein kinases is strongly influenced by the amino acid sequence surrounding the phosphoacceptor site. Identification of the preferred peptide phosphorylation motif for a given kinase permits the production of efficient peptide substrates and greatly simplifies the mapping of phosphorylation sites in protein substrates. Here we describe a combinatorial peptide library method that allows rapid generation of phosphorylation motifs for serine/threonine kinases.     

A rapid method for the identification of plasmid desoxyribonucleic acid in bacteria

A fast and very sensitive procedure is described for detecting plasmids in bacterial strains. The size of plasmids is determined by agarose gel electrophoresis. Plasmids present in one or more copies per cell with a molecular mass ranging from 2 to over 150 megadaltons may be identified.     

A rapid and simple method for plasmid copy number comparison

Summary A rapid, simple, and sensitive method for plasmid copy number comparison was developed. The extracted plasmids from the same amount of cells were subjected to agarose gel electrophoresis and the gels photographed. The photographs were processed by a Macintosh image analyser to enumerate the densities of plasmid bands. As a size reference, λ-DNA digested with a restriction enzyme was used. The densities divided by size of plasmids (base pair) would represent relative values of their copy numbers.     

Microscale method for rapid isolation of covalently closed circular plasmid DNA from group N streptococci

A method for rapid purification of plasmid DNA from lactic streptococci, utilizing microliter quantities of reagents, was developed by combination of a short lysozyme-mutanolysin cell wall digestion with a modification of the Escherichia coli plasmid isolation procedure of McMaster et al. (Anal. Biochem. 109:47-54, 1980). The preparations obtained were highly enriched for covalently closed circular DNA, and the method was applicable to plasmids of at least 40 megadaltons. Centrifugation in CsCl-ethidium bromide density gradients was not required.