The Effect of Manganese-induced Cytotoxicity on mRNA Expressions of HSP27, HSP40, HSP60, HSP70 and HSP90 in Chicken Spleen Lymphocytes in Vitro

The purpose of this study was to investigate the effect of manganese (Mn)-induced cytotoxicity on heat shock proteins in chicken spleen lymphocytes. Lymphocytes were cultured in medium in the absence and presence of MnCl₂ (2?×?10^?4, 4?×?10^?4, 6?×?10^?4, 8?×?10^?4, 10?×?10^?4, and 12?×?10^?4 mmol/L) for 12, 24, 36, and 48 h in vitro. Then, the mRNA levels of HSP27, HSP40, HSP60, HSP70, and HSP90 were examined by real-time quantitative PCR. The results showed that the mRNA levels of HSP27, HSP40, HSP60, HSP70, and HSP90 in all treatment groups at all time points, except mRNA levels of HSP27 at 48 h, had the same tendency. As manganese concentration increased, the mRNA expression of the heat shock proteins first increased and then decreased. In other words, we demonstrated that the mRNA expression of the heat shock proteins was induced at lower concentrations of manganese and was inhibited at higher concentrations. Mn had a dosage-dependent effect on HSP27, HSP40, HSP60, HSP70, and HSP90 mRNA expression in chicken spleen lymphocytes in vitro.     

Thulium Ion Promotes Apoptosis of Primary Mouse Bone Marrow Stromal Cells

Bone is one of the main target organs for the lanthanides (Ln). Biodistribution studies of Tm-based compounds in vivo showed that bone had significant uptake. But the effect of Tm³⁺ on primary mouse bone marrow stromal cells (BMSCs) has not been reported. So we investigated the effect and underlying mechanisms of Tm³⁺ on BMSCs. Cell viability, cell apoptosis, reactive oxygen species (ROS) level, lactate dehydrogenase (LDH) activity and mitochondrial membrane potential (MMP) were studied. The results indicated that Tm³⁺ increased the viability of BMSCs at concentrations of 1?×?10^?7, 1?×?10^?6, 1?×?10^?5, and 1?×?10^?4 mol/L in a dose-dependent manner, turned to decrease the viability of BMSCs at the highest concentration of 1?×?10^?3 mol/L for 24, 48, and 72 h. Tm³⁺ at 1?×?10^?3 mol/L promoted apoptosis of BMSCs, increased the ROS and LDH levels, and decreased MMP in BMSCs. Taken together, we demonstrated that Tm³⁺ at 1?×?10^?3 mol/L might induce cellular apoptosis through mitochondrial pathway. These results may be helpful for more rational application of Tm-based compounds in the future.     

Fluorescence spectrometric study on the interaction of tamibarotene with bovine serum albumin

The interaction between tamibarotene and bovine serum albumin (BSA) was studied using fluorescence quenching technique and ultraviolet–visible spectrophotometry. The results of experiments showed that tamibarotene could strongly quench the intrinsic fluorescence of BSA by a dynamic quenching mechanism. The apparent binding constant, number of binding site and corresponding thermodynamic parameters at different temperatures were calculated respectively, and the main interaction force between tamibarotene and BSA was proved to be hydrophobic force. Synchronous fluorescence spectra showed that tamibarotene changed the molecular conformation of BSA. When BSA concentration was 1.00 × 10^?6 mol L^?1, the quenched fluorescence ΔF had a good linear relationship with the concentration of tamibarotene in the range 1.00 × 10^?6 to 12.00 × 10^?6 mol L^?1 with the detection limit of 6.52 × 10^?7 mol L^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

Spectroscopic Studies on the Interaction of Fluorine Containing Triazole with Bovine Serum Albumin

The binding of one fluorine including triazole (C₁₀H₉FN₄S, FTZ) to bovine serum albumin (BSA) was studied by spectroscopic techniques including fluorescence spectroscopy, UV–Vis absorption, and circular dichroism (CD) spectroscopy under simulative physiological conditions. Fluorescence data revealed that the fluorescence quenching of BSA by FTZ was the result of forming a complex of BSA–FTZ, and the binding constants (K _a) at three different temperatures (298, 304, and 310 K) were 1.516?×?10⁴, 1.627?×?10⁴, and 1.711?×?10⁴?mol L^?1, respectively, according to the modified Stern–Volmer equation. The thermodynamic parameters ΔH and ΔS were estimated to be 7.752 kJ mol^?1 and 125.217 J?mol^?1?K^?1, respectively, indicating that hydrophobic interaction played a major role in stabilizing the BSA–FTZ complex. It was observed that site I was the main binding site for FTZ to BSA from the competitive experiments. The distance r between donor (BSA) and acceptor (FTZ) was calculated to be 7.42 nm based on the Förster theory of non-radioactive energy transfer. Furthermore, the analysis of fluorescence data and CD data revealed that the conformation of BSA changed upon the interaction with FTZ.     

Effects of nitrogen delivery on chitin nanofiber production during batch cultivation of the diatom <Emphasis Type="Italic">Cyclotella</Emphasis> sp. in a bubble column photobioreactor

The photosynthetic diatom Cyclotella sp. extrudes chitin nanofibers following cell division. This diatom requires silicon for cell wall biosynthesis and division, as well as nitrogen for biosynthesis of intracellular material and extracellular chitin, an N-acetyl glucosamine biopolymer. The initial nitrogen/silicon molar ratio was the critical parameter for assessing the limits of nitrogen delivery on cell number and chitin production during batch cultivation of Cyclotella in a bubble column photobioreactor under silicon-limited growth conditions, using nitrate as the nitrogen source. The peak rate of volumetric chitin production increased linearly, from 3.0 to 46 mg chitin L^?1 day^?1, with increasing N/Si ratio over the range studied (0.82 to 8.6 mol N mol^?1 Si). However, the cell number yield and the chitin yield per cell increased asymptotically with increasing N/Si ratio, achieving a final cell number yield of 5.3?×?10⁹?±?2.6?×?10⁸ cells mol^?1 Si and chitin yield of 28.7?±?1.2 mg chitin per 10⁹ cells (1.0 S.E.). An N/Si ratio of at least 4.0 mol N mol^?1 Si achieved 90% of the asymptotic chitin yield. This study has shown that scalable cultivation systems for maximizing chitin nanofiber production will require delivery of both silicon and optimal nitrogen under silicon-limiting growth conditions to promote cell division and subsequent chitin formation.     

The effectiveness of the high-LET radiations from the boron neutron capture [<Superscript>10</Superscript>B(n,α)<Superscript>7</Superscript>Li] reaction determined for induction of chromosome aberrations and apoptosis in lymphocytes of human blood samples

Provided that a selective accumulation of ¹⁰B-containing compounds is introduced in tumor cells, following irradiation by thermal neutrons produces high-LET alpha-particles (⁴He) and recoiling lithium-7 (⁷Li) nuclei emitted during the capture of thermalized neutrons (0.025 eV) from ¹⁰B. To estimate the biological effectiveness of this boron neutron capture [¹⁰B(n,α)⁷Li] reaction, the chromosome aberration assay and the flow cytometry apoptosis assay were applied. At the presence of the clinically used compounds BSH (sodium borocaptate) and BPA (p-boronophenylalanine), human lymphocytes were irradiated by sub-thermal neutrons. For analyzing chromosome aberrations, human lymphocytes were exposed to thermally equivalent neutron fluences of 1.82 × 10¹¹ cm^?2 or 7.30 × 10¹¹ cm^?2 (corresponding to thermal neutron doses of 0.062 and 0.248 Gy, respectively) in the presence of 0, 10, 20, and 30 ppm of BSH or BPA. Since the kerma coefficient of blood increased by 0.864 × 10^?12 Gy cm² per 10 ppm of ¹⁰B, the kerma coefficients in blood increase from 0.34 × 10^?12 cm² (blood without BSH or BPA) up to 2.93 × 10^?12 Gy cm² in the presence of 30 ppm of ¹⁰B. For the ¹⁰B(n, α)⁷Li reaction, linear dose–response relations for dicentrics with coefficients α = 0.0546 ± 0.0081 Gy^?1 for BSH and α = 0.0654 ± 0.0075 Gy^?1 for BPA were obtained at 0.062 Gy as well as α = 0.0985 ± 0.0284 Gy^?1 for BSH and α = 0.1293 ± 0.0419 Gy^?1 for BPA at 0.248 Gy. At both doses, the corresponding ¹⁰B(n, α)⁷Li reactions from BSH and BPA are not significantly different. A linear dose–response relation for dicentrics also was obtained for the induction of apoptosis by the ¹⁰B(n, α)⁷Li reaction at 0.248 Gy. The linear coefficients α = 0.0249 ± 0.0119 Gy^?1 for BSH and α = 0.0334 ± 0.0064 Gy^?1 for BPA are not significantly different. Independently of the applied thermal neutron doses of 0.062 Gy or 0.248 Gy, the ¹⁰B(n, α)⁷Li reaction from 30 ppm BSH or BPA induced an apparent RBE of about 2.2 for the production of dicentrics as compared to exposure to thermal neutrons alone. Since the apparent RBE value is defined as the product of the RBE of a thermal neutron dose alone times a boron localization factor which depends on the concentration of a ¹⁰B-containing compound, this localization factor determines the biological effectiveness of the ¹⁰B(n, α)⁷Li reaction.     

Sensitive determination of enoxacin in pharmaceutical formulations by its quench effect on the fluorescence of glutathione‐capped CdTe quantum dots

A sensitive and simple method for the determination of enoxacin (ENX) was developed based on the fluorescence quenching effect of ENX for glutathione (GSH)‐capped CdTe quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 4.333 × 10^?9 mol?L^?1 to 1.4 × 10^?5 mol?L^?1 with a correlation coefficient (R) of 0.9987, and the detection limit (3σ/K) was 1.313 × 10^?9 mol?L^?1. The corresponding mechanism has been proposed on the basis of electron transfer supported by ultraviolet–visible (UV) light absorption, fluorescence spectroscopy, and the measurement of fluorescence lifetime. The method has been applied to the determination of ENX in pharmaceutical formulations (enoxacin gluconate injections and commercial tablets) with satisfactory results. The proposed method manifested several advantages such as high sensitivity, short analysis time, low cost and ease of operation. Copyright © 2015 John Wiley & Sons, Ltd.     

The behaviors of metal ions in the CdTe quantum dots–H2O2 chemiluminescence reaction and its sensing application

The behaviors of 15 kinds of metal ions in the thiol‐capped CdTe quantum dots (QDs)–H₂O₂ chemiluminescence (CL) reaction were investigated in detail. The results showed that Ag⁺, Cu²⁺ and Hg²⁺ could inhibit CdTe QDs and H₂O₂ CL reaction. A novel CL method for the selective determination of Ag⁺, Cu²⁺ and Hg²⁺ was developed, based on their inhibition of the reaction of CdTe QDs and H₂O₂. Under the optimal conditions, good linear relationships were realized between the CL intensity and the logarithm of concentrations of Ag⁺, Cu²⁺ and Hg²⁺. The linear ranges were from 2.0 × 10^?6 to 5.0 × 10^?8 mol L^?1 for Ag⁺, from 5.0 × 10^?6 to 7.0 × 10^?8 mol L^?1 for Cu²⁺ and from 2.0 × 10^?5 to 1.0 × 10^?7 mol L^?1 for Hg²⁺, respectively. The limits of detection (S/N = 3) were 3.0 × 10^?8, 4.0 × 10^?8 and 6.7 × 10^?8 mol L^?1 for Ag⁺, Cu²⁺ and Hg²⁺, respectively. A possible mechanism for the inhibition of CdTe QDs and H₂O₂ CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

High‐sensitivity spectrofluorimetric determination of tiopronin based on inhibition of hemoglobin

A highly sensitive and simple spectrofluorimetric method for the determination of tiopronin based on its inhibitory effect on the hemoglobin‐catalyzed reaction of H₂O₂ and l ‐tyrosine was developed. The concentration of tiopronin is linear with decreased fluorescence (ΔF) of the system under the optimal experimental conditions. The calibration graph is linear in the range 1.23 × 10^?8 to 3.06 × 10^?5 mol L^?1 with a detection limit of 6.13 × 10^?9 mol L^?1. The relative standard deviation was 4.38% for 11 determinations of 6.13 × 10^?6 mol L^?1. This method can be used for the determination of tiopronin in pharmaceuticals with satisfactory results. Copyright © 2010 John Wiley & Sons, Ltd.     

Elicitor mediated enhancement of wedelolactone in cell suspension culture of <Emphasis Type="Italic">Eclipta alba</Emphasis> (L.) Hassk

The present research focused on enhancing the production of wedelolactone through cell suspension culture (CSC) in Eclipta alba (L.) Hassk. With an aim of attaining a sustainable CSC, various plant growth regulators, elicitors and agitation speed were examined. Nodal segments of in vitro propagated plantlets induced the maximum percentage (93.47?±?0.61%) of callus inoculated on Murashige and Skoog (MS) medium fortified with picloram (2 mg L^?1). The growth kinetics of CSC exhibited a sigmoid pattern with a lag phase (0–6 days), a log phase (6–18 days), a stationary phase (18–24 days) and then death phase thereafter. The highest biomass accumulation in CSC with 7.09?±?0.06 g 50 mL^?1 fresh weight, 1.52?±?0.02 g 50 mL^?1 dry cell weight, 1.34?±?0.01?×?10⁶ cell mL^?1 total cell count and 57.00?±?0.58% packed cell volume was obtained in the liquid MS medium supplemented with 1.5 mg L^?1 picloram plus 0.5 mg L^?1 kinetin at 120 rpm. High performance thin layer chromatography confirmed that yeast extract (biotic elicitor) at 150 mg L^?1 accumulated more CSC biomass with 1.22-fold increase in wedelolactone (288.97?±?1.94 µg g^?1 dry weight) content in comparison to the non-elicited CSC (237.78?±?0.04 µg g^?1 dry weight) after 120 h of incubation. Contrastingly, methyl jasmonate (abiotic elicitor) did not alter the biomass but increased the wedelolactone content (259.32?±?1.06 µg g^?1 dry weight) to an extent of 1.09-fold at 100 µM. Complete plantlet regeneration from CSC was possible on MS medium containing N⁶-benzyladenine (0.75 mg L^?1) and abscisic acid (0.5 mg L^?1). Thus, the establishment of protocol for CSC constitutes the bases for future biotechnological improvement studies in this crop.     

Characterization of cell growth and starch production in the marine green microalga Tetraselmis subcordiformis under extracellular phosphorus-deprived and sequentially phosphorus-replete conditions

Microalgal starch is a potential feedstock for biofuel production. Nutrient stress is widely used to stimulate starch accumulation in microalgae. Cell growth and starch accumulation in the marine green microalga Tetraselmis subcordiformis were evaluated under extracellular phosphorus deprivation with initial cell densities (ICD) of 1.5, 3.0, 6.0, and 9.0?×?10⁶ cells mL^?1. The intracellular stored phosphorus supported cell growth when extracellular phosphorus was absent. The maximum starch content of 44.1 % was achieved in the lowest ICD culture, while the maximum biomass productivity of 0.71 g L^?1 day^?1, starch concentration of 1.6 g L^?1, and starch productivity of 0.30 g L^?1 day^?1 were all obtained in the culture with the ICD of 3.0?×?10⁶ cells mL^?1. Appropriate ICD could be used to regulate the intracellular phosphorus concentration and maintain adequate photosynthetic activity to achieve the highest starch productivity, along with biomass and starch concentration. The recovery of phosphorus-deprived T. subcordiformis in medium containing 0.5, 1.0, or 6.0 mM KH₂PO₄ was also tested. Cell growth and starch accumulation ability could be recovered completely. A phosphorus pool in T. subcordiformis was shown to manipulate its metabolic activity under different environmental phosphorus availability. Though lower starch productivity and starch content were achieved under phosphorus deprivation compared with nitrogen- or sulfur-deprived conditions, the higher biomass and starch concentration make T. subcordiformis a good candidate for biomass and starch production under extracellular phosphorus deprivation.     

Calorific values of Chlorella vulgaris (Trebouxiophyceae) as a function of different phosphorus concentrations

Quantification of the calorific content of microalgae is critical in studies of energy flow, trophic partitioning, plant/herbivore interactions in aquaculture and biomass production for biofuels. We investigated the calorific value and biochemical composition of Chlorella vulgaris at different phosphorus (P) concentrations (6.0 × 10^?7, 2.3 × 10^?6 and 2.3 × 10^?4 mol L^?1 P). As expected, the control (2.3 × 10^?4 mol L^?1 P) supported better growth than P limited treatments. Biomolecules like total carbohydrates and lipids accumulated under P limitation, which significantly correlated with high calorific values. Lipid class composition showed that triacylglycerols were the most accumulated under P limited conditions. The calorific value reported under control conditions (13.78 kJ g^?1) was less than those obtained under P limitation (30.47–33.07 kJ g^?1). The highest calorific value with less growth retardation was obtained at 2.3 × 10^?6 mol L^?1 P.     

Sea ice microbial dynamics over an annual ice cycle in Prydz Bay, Antarctica

Microbial community dynamics within the fast sea ice of Prydz Bay (68°S?78°E) were investigated over an annual cycle at two sites (1 and 3?km offshore) between April and November 2008. There are few long-term sea ice studies, and few that cover the phase of winter darkness when autotrophic processes are curtailed. Mean chlorophyll a concentrations in the ice column ranged between 0.76 and 44.8?μg?L^?1 at the 1-km site (Site 1) and 3.11–144.6?μg?L^?1 at the 3-km site (Site 2). Highest chlorophyll a usually occurred at the base of the ice. Bacterial concentrations ranged between 0.30 and 2.08?×?10⁸?cells?L^?1, heterotrophic nanoflagellates (HNAN) between 0.21?×?10⁵ and 2.98?×?10⁵?cells?L^?1 and phototrophic nanoflagellates (PNAN) 0–1.06?×?10⁵?cells?L^?1. While HNAN occurred throughout the year, PNAN were largely absent in winter. Dinoflagellates were a conspicuous and occasionally an abundant element of the community (maximum 17,460?cells?L^?1), while ciliates were sparse. The bacterial community showed considerable morphological diversity with a dominance of filamentous forms. Bacterial production continued throughout the year ranging between 0 and 22.92?μg?C?L^?1?day^?1 throughout the ice column. Lowest rates occurred between late June and early August. The sea ice sustained an active and diverse microbial community through its annual extent. The data suggest that during winter darkness the microbial community is dominated by heterotrophic processes, sustained by a pool of dissolved organic carbon.     

Understanding nucleosomal histone and DNA interactions: a biophysical study

Histones are associated with DNA to form nucleosome essential for chromatin structure and major nuclear processes like gene regulation and expression. Histones consist of H1, H2A, H2B and H3, H4 type proteins. In the present study, combined histones from calf thymus were complexed with ct DNA and their binding affinities were measured fluorimetrically. All the five histones were resolved on SDS page and their binding with DNA was visualized. The values of biding affinities varied with pH and salt concentration. Highest affinity (4.0?×?10⁵ M^?1) was recorded at pH 6.5 in 50 mM phosphate buffer and 1.5?×?10⁴ M^?1 in 2 M NaCl at pH 7.0. The CD spectra support the highest binding affinity with maximum conformational changes at pH 7.0. The time-resolved fluorescence data recorded two life times for histone tyrosine residues at 300 nm emission in phosphate buffer pH 6.5. These life times did not show much change upon binding with DNA in buffer as well as in 2 M NaCl. The isothermal calorimetric studies yielded thermodynamic parameters ΔG, ΔH and ΔS as ?1.6?×?10⁵ cal/mol, ?1.13?×?10³ cal/mol and ?3.80 cal/mol/deg, respectively, evidencing a spontaneous exothermic reaction. The dominant binding forces in building the nucleosome are electrostatic interactions.     

A sensitive method for determination of trace amounts of chromate (III) with terbium (III) sodium hexametaphosphate chelate as fluorescent probe

Based on the fluorescence quenching of Terbium (III)‐sodium hexametaphosphate (Tb/SHMP) chelates in the presence chromate (III), a sensitive fluorimetric method was developed for the determination of trace amounts of chromium (III) in aqueous solutions. Under the optimum conditions, the linear calibration graph was obtained (R = 0.996). The linear range and detection limit of Cr (III) were 7.69 × 10^?7 to 1.15 × 10^?4 mol L^?1 and 4.50 × 10^?7 mol L^?1, respectively. The proposed method had a wider linear range and was proved to be very sensitive, rapid and simple. The method was applied successfully to the determination of chromium (III) in the synthetic samples and real water samples. Moreover, the reaction mechanism was discussed through the fluorescence lifetime and proved to be dynamic quenching behavior. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination on the binding of chlortetracycline to bovine serum albumin using spectroscopic methods

In this work, the interaction of chlortetracycline with bovine serum albumin (BSA) was investigated by fluorescence spectroscopy, circular dichroism (CD) spectroscopy, and molecular docking. Results indicated that chlortetracycline quenches BSA fluorescence mainly by a static quenching mechanism. The quenching constants (K_SV) were obtained as 5.64 × 10⁴, 4.49 × 10^4/, and 3.44 × 10^4/ M_?1 at 283, 295, and 307 K, respectively. The thermodynamic parameters of enthalpy change Δ H°, entropy change Δ S°, and free energy change Δ G° were ?5.12 × 10^4/ J mol?1, ?97.6 J mol?1 K?1, and ?2.24 × 10^4/ J mol?1 (295 K), respectively. The association constant (K_A) and the number of binding sites (n) were 9.41 × 10^3/ M?1 and 0.86, respectively. The analysis results suggested that the interaction was spontaneous, and van der Waals force and hydrogen‐bonding interactions played key roles in the reaction process. In addition, CD spectra proved secondary structure alteration of BSA in the presence of chlortetracycline. © 2012 Wiley Periodicals, Inc. J Biochem Mol Toxicol 26:331–336, 2012; View this article online at wileyonlinelibrary.com . DOI 10:1002/jbt.21424     

Efficiency of copper removal by Sargassum sinicola in batch and continuous systems

The efficiency of batch and continuous systems of copper removal by Sargassum sinicola was studied. The effects of flow rate, initial metal concentration, and bed density on the capacity of the continuous system were also recorded. In batch systems, the maximum biosorption capacity was calculated as 49.63?±?0.88 mg g^?1; in the continuous system, under the following conditions: flow rate of 10 mL min^?1, initial solution of 200 mg Cu L^?1, bed density of 150 g L^?1, and higher copper removal of 62.39?±?1.91 mg g^?1 was achieved. The Thomas model can be used to predict the breakthrough curves, but it underestimated breakthrough time.     

A Visualized Assay for Quercetin Based on the Formation of Silver–Gold Alloy Nanoparticles

A visualized assay for quercetin (QU) was first developed based on the formation of silver–gold alloy nanoparticles in this contribution. With the ability to reduce metal ions to metal substances, QU could reduce Ag⁺ absorbed on the surface of gold nanoparticles to metallic silver. The thickness of the formed Ag shell and the color change of the solution were proportional to the concentration of QU. Therefore, visualized detection of QU could be realized by studying the surface resonance plasmon absorption spectra of the analytical systems after addition of different concentration of QU. Under optimum conditions, trace amount of QU could be detected in the linear range 9.0?×?10^?7–1.0?×?10^?4 mol L^?1 with a detection limit of 6.5?×?10^?7 mol L^?1. The present assay was applied in the determination of QU in human serum and satisfactory results were obtained. This assay is simple, rapid, and cost-effective, and it is a powerful complement for the spectroscopy assays for QU. Also, it is the first visualized spectroscopic assay of QU until now.     

Mechanism for the depolymerization of cellulose under alkaline conditions

The mechanism for the hydroxyl-radical-induced depolymerization of cellulose under alkaline conditions in air was investigated using density functional theory at the B3LYP/6-31+G(d,p) level as well as electron transfer theory. The pathway for the depolymerization of cellulose was obtained theoretically and H abstraction from the C(3) atom of the pyran ring during the cleavage of the glucosidic bond was found to be the rate-limiting step due to its high energy barrier (16.81 kcal/mol) and low reaction rate constant (4.623?×?10⁴ mol L^?1 s^?1). Calculations of the electron transfer between O₂ and the saccharide radical performed with the HARLEM software package revealed that following the H abstraction, the oxygen molecule approaches C(2) on the saccharide radical and obtains an electron from the radical, even though no bond forms between the oxygen molecule and the radical. The rate constant for electron transfer could be as high as 1.572?×?10¹¹ s^?1. Furthermore, an enol intermediate is obtained during the final stage of the depolymerization.     

Effect of high ferric ion concentrations on total lipids and lipid characteristics of Tetraselmis subcordiformis,Nannochloropsis oculata and Pavlova viridis

Microalgae as sources for biodiesel production have been widely investigated. Microalgae biomass, lipid content and fatty acid profiles of microalgae are limiting factors for the cost-effective production of biodiesel. In this paper, the effects of high ferric ion concentrations on three species of microalgae (Tetraselmis subcordiformis, Nannochloropsis oculata and Pavlova viridis) were studied. The microalgae were cultured in different concentrations (1.2?×?10^?2, 1.2?×?10^?1, 1.2 and 12 mmol L^?1) of ferric ion. The growth, lipid content and fatty acid profiles of the three microalgae were analysed. When algae were cultured in 1.2 mmol L^?1 ferric ion for 10 days, the final cell density and specific growth rates of T. subcordiformis, N. oculata and P. viridis decreased significantly (p?<?0.05), and the total lipid contents of the microalgae, 33.72, 37.34 and 29.48 % (dry mass) in T. subcordiformis, N. oculata and P. viridis, respectively, were higher than those at other concentrations. The neutral lipid/total lipid ratios of the three microalgae species increased with increasing ferric ion concentration. Neutral lipids accounted for 50.75, 48.37 and 46.59 % of the total lipid in T. subcordiformis, N. oculata and P. viridis, respectively, when cultured in 12 mmol L^?1 ferric ion. The proportions of saturated fatty acids in all three species cultured in 12 mmol L^?1 ferric ion were significantly higher than those cultured in lower ferric ion concentrations. An optimum ferric ion concentration can improve the properties of T. subcordiformis, N. oculata and P. viridis as sources for biodiesel.